1 files changed, 46 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index f01a3988538c..3ab60c70286f 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -17,6 +17,9 @@ description:
 maintainers:
   - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
 
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
 properties:
   compatible:
     enum:
@@ -31,16 +34,58 @@ properties:
       This property depends on the module vendor's
       configuration.
 
+  firmware-name:
+    maxItems: 1
+
+  device-wakeup-gpios:
+    maxItems: 1
+    description:
+      Host-To-Chip power save mechanism is driven by this GPIO
+      connected to BT_WAKE_IN pin of the NXP chipset.
+
+  nxp,wakein-pin:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      The GPIO number of the NXP chipset used for BT_WAKE_IN.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Host wakeup by falling edge interrupt on this pin which is
+      connected to BT_WAKE_OUT pin of the NXP chipset.
+
+  interrupt-names:
+    items:
+      - const: wakeup
+
+  wakeup-source: true
+
+  nxp,wakeout-pin:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      The GPIO number of the NXP chipset used for BT_WAKE_OUT.
+
 required:
   - compatible
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     serial {
         bluetooth {
             compatible = "nxp,88w8987-bt";
             fw-init-baudrate = <3000000>;
+            firmware-name = "uartuart8987_bt_v0.bin";
+            device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+            nxp,wakein-pin = /bits/ 8 <18>;
+            nxp,wakeout-pin = /bits/ 8 <19>;
+            local-bd-address = [66 55 44 33 22 11];
+            interrupt-parent = <&gpio>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "wakeup";
+            wakeup-source;
         };
     };