summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/broadcom-bluetooth.txt')
-rw-r--r--Documentation/devicetree/bindings/net/broadcom-bluetooth.txt15
1 files changed, 13 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index f16b99571af1..dd258674633c 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -11,6 +11,7 @@ Required properties:
- compatible: should contain one of the following:
* "brcm,bcm20702a1"
+ * "brcm,bcm4329-bt"
* "brcm,bcm4330-bt"
* "brcm,bcm43438-bt"
* "brcm,bcm4345c5"
@@ -22,7 +23,9 @@ Optional properties:
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
- shutdown-gpios: GPIO specifier, used to enable the BT module
- device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
+ deprecated, replaced by interrupts and
+ "host-wakeup" interrupt-names
- clocks: 1 or 2 clocks as defined in clock-names below, in that order
- clock-names: names for clock inputs, matching the clocks given
- "extclk": deprecated, replaced by "txco"
@@ -30,7 +33,14 @@ Optional properties:
- "lpo": external low power 32.768 kHz clock
- vbat-supply: phandle to regulator supply for VBAT
- vddio-supply: phandle to regulator supply for VDDIO
-
+ - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array
+ - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
+ - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+ - pcm-frame-type: short, long
+ - pcm-sync-mode: slave, master
+ - pcm-clock-mode: slave, master
+ - interrupts: must be one, used to wakeup the host processor
+ - interrupt-names: must be "host-wakeup"
Example:
@@ -41,5 +51,6 @@ Example:
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <921600>;
+ brcm,bt-pcm-int-params = [01 02 00 01 01];
};
};