diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/can')
3 files changed, 8 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt index 14e52a0d86ec..218a3b3eb27e 100644 --- a/Documentation/devicetree/bindings/net/can/atmel-can.txt +++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt @@ -1,7 +1,8 @@ * AT91 CAN * Required properties: - - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can" + - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or + "microchip,sam9x60-can" - reg: Should contain CAN controller registers location and length - interrupts: Should contain IRQ line for the CAN controller diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 19e4a7d91511..85c6551b602a 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -7,6 +7,7 @@ Required properties: "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. + "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC. "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. @@ -36,8 +37,8 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, -R8A77990, and R8A77995: +Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796, +R8A77965, R8A77990, and R8A77995: For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt index a901cd9be29e..13a4e34c0c73 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Must contain one or more of the following: - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. + - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller. - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. @@ -31,8 +32,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each child node supports the "status" property only, which is used to enable/disable the respective channel. -Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, -R8A77990, and R8A77995: +Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796, +R8A77965, R8A77990, and R8A77995: In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done using the below |