summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/dsa/dsa.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/dsa.txt')
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt91
1 files changed, 91 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
new file mode 100644
index 000000000000..49f4f7ae3f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -0,0 +1,91 @@
+Marvell Distributed Switch Architecture Device Tree Bindings
+------------------------------------------------------------
+
+Required properties:
+- compatible : Should be "marvell,dsa"
+- #address-cells : Must be 2, first cell is the address on the MDIO bus
+ and second cell is the address in the switch tree.
+ Second cell is used only when cascading/chaining.
+- #size-cells : Must be 0
+- dsa,ethernet : Should be a phandle to a valid Ethernet device node
+- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
+
+Optionnal properties:
+- interrupts : property with a value describing the switch
+ interrupt number (not supported by the driver)
+
+A DSA node can contain multiple switch chips which are therefore child nodes of
+the parent DSA node. The maximum number of allowed child nodes is 4
+(DSA_MAX_SWITCHES).
+Each of these switch child nodes should have the following required properties:
+
+- reg : Describes the switch address on the MII bus
+- #address-cells : Must be 1
+- #size-cells : Must be 0
+
+A switch may have multiple "port" children nodes
+
+Each port children node must have the following mandatory properties:
+- reg : Describes the port address in the switch
+- label : Describes the label associated with this port, special
+ labels are "cpu" to indicate a CPU port and "dsa" to
+ indicate an uplink/downlink port.
+
+Note that a port labelled "dsa" will imply checking for the uplink phandle
+described below.
+
+Optionnal property:
+- link : Should be a phandle to another switch's DSA port.
+ This property is only used when switches are being
+ chained/cascaded together.
+
+Example:
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupts = <10>;
+ dsa,ethernet = <&ethernet0>;
+ dsa,mii-bus = <&mii_bus0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16 0>; /* MDIO address 16, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+
+ switch0uplink: port@6 {
+ reg = <6>;
+ label = "dsa";
+ link = <&switch1uplink>;
+ };
+ };
+
+ switch@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <17 1>; /* MDIO address 17, switch 1 in tree */
+
+ switch1uplink: port@0 {
+ reg = <0>;
+ label = "dsa";
+ link = <&switch0uplink>;
+ };
+ };
+ };