diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 30 |
1 files changed, 29 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index c963dc09e8e1..62ca63e8a26f 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -22,7 +22,9 @@ properties: - microchip,ksz8794 - microchip,ksz8795 - microchip,ksz8863 + - microchip,ksz8864 # 4-port version of KSZ8895 family switch - microchip,ksz8873 + - microchip,ksz8895 # 5-port version of KSZ8895 family switch - microchip,ksz9477 - microchip,ksz9897 - microchip,ksz9896 @@ -31,6 +33,8 @@ properties: - microchip,ksz9893 - microchip,ksz9563 - microchip,ksz8563 + - microchip,ksz8567 + - microchip,lan9646 reset-gpios: description: @@ -50,6 +54,11 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,pme-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if the PME pin polarity is active-high. + microchip,io-drive-strength-microamp: description: IO Pad Drive Strength @@ -73,6 +82,26 @@ properties: interrupts: maxItems: 1 + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + properties: + mdio-parent-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle pointing to the MDIO bus controller connected to the + secondary MDIO interface. This property should be used when + the internal MDIO bus is accessed via a secondary MDIO + interface rather than the primary management interface. + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: /schemas/net/ethernet-phy.yaml# + unevaluatedProperties: false + description: + Integrated PHY node + required: - compatible - reg @@ -130,7 +159,6 @@ examples: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; - id = <1>; ksz9477: switch@0 { compatible = "microchip,ksz9477"; |