summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/marvell-pp2.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/marvell-pp2.txt')
-rw-r--r--Documentation/devicetree/bindings/net/marvell-pp2.txt141
1 files changed, 0 insertions, 141 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
deleted file mode 100644
index ce15c173f43f..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Marvell Armada 375 Ethernet Controller (PPv2.1)
- Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
- Marvell CN913X Ethernet Controller (PPv2.3)
-
-Required properties:
-
-- compatible: should be one of:
- "marvell,armada-375-pp2"
- "marvell,armada-7k-pp2"
-- reg: addresses and length of the register sets for the device.
- For "marvell,armada-375-pp2", must contain the following register
- sets:
- - common controller registers
- - LMS registers
- - one register area per Ethernet port
- For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
- sets:
- - packet processor registers
- - networking interfaces registers
- - CM3 address space used for TX Flow Control
-
-- clocks: pointers to the reference clocks for this device, consequently:
- - main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- - GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- - MG clock (only for armada-7k-pp2)
- - MG Core clock (only for armada-7k-pp2)
- - AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
- "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
-
-The ethernet ports are represented by subnodes. At least one port is
-required.
-
-Required properties (port):
-
-- interrupts: interrupt(s) for the port
-- port-id: ID of the port from the MAC point of view
-- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
- GOP (Group Of Ports) point of view. This ID is used to index the
- per-port registers in the second register area.
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties (port):
-
-- marvell,loopback: port is loopback mode
-- phy: a phandle to a phy node defining the PHY address (as the reg
- property, a single integer).
-- interrupt-names: if more than a single interrupt for is given, must be the
- name associated to the interrupts listed. Valid names are:
- "hifX", with X in [0..8], and "link". The names "tx-cpu0",
- "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
- for backward compatibility but shouldn't be used for new
- additions.
-- marvell,system-controller: a phandle to the system controller.
-
-Example for marvell,armada-375-pp2:
-
-ethernet@f0000 {
- compatible = "marvell,armada-375-pp2";
- reg = <0xf0000 0xa000>,
- <0xc0000 0x3060>,
- <0xc4000 0x100>,
- <0xc5000 0x100>;
- clocks = <&gateclk 3>, <&gateclk 19>;
- clock-names = "pp_clk", "gop_clk";
-
- eth0: eth0@c4000 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- phy = <&phy0>;
- phy-mode = "gmii";
- };
-
- eth1: eth1@c5000 {
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- phy = <&phy3>;
- phy-mode = "gmii";
- };
-};
-
-Example for marvell,armada-7k-pp2:
-
-cpm_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-
- eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <0>;
- gop-port-id = <0>;
- };
-
- eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <1>;
- gop-port-id = <2>;
- };
-
- eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <2>;
- gop-port-id = <3>;
- };
-};