1 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index db74474207ed..28a0bddb9af9 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -62,6 +62,69 @@ properties:
        for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
        to transmit data.
 
+  ti,cfg-dac-minus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level -1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,cfg-dac-plus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level +1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,rmii-mode:
+    description: |
+       If present, select the RMII operation mode. Two modes are
+       available:
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
+       The RMII operation mode can also be configured by its straps.
+       If the strap pin is not set correctly or not set at all, then this can be
+       used to configure it.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - master
+      - slave
+
+  ti,gpio2-clk-out:
+    description: |
+       DP83822 PHY only.
+       The GPIO2 pin on the DP83822 can be configured as clock output. When
+       omitted, the PHY's default will be left as is.
+
+       - 'mac-if': In MII mode the clock frequency is 25-MHz, in RMII Mode the
+         clock frequency is 50-MHz and in RGMII Mode the clock frequency is
+         25-MHz.
+       - 'xi': XI clock(pass-through clock from XI pin).
+       - 'int-ref': Internal reference clock 25-MHz.
+       - 'rmii-master-mode-ref': RMII master mode reference clock 50-MHz. RMII
+         master mode reference clock is identical to MAC IF clock in RMII master
+         mode.
+       - 'free-running': Free running clock 125-MHz.
+       - 'recovered': Recovered clock is a 125-MHz recovered clock from a
+         connected link partner.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - mac-if
+      - xi
+      - int-ref
+      - rmii-master-mode-ref
+      - free-running
+      - recovered
+
+  mac-termination-ohms:
+    enum: [43, 44, 46, 48, 50, 53, 55, 58, 61, 65, 69, 73, 78, 84, 91, 99]
+
 required:
   - reg
 
@@ -76,6 +139,8 @@ examples:
         reg = <0>;
         rx-internal-delay-ps = <1>;
         tx-internal-delay-ps = <1>;
+        ti,gpio2-clk-out = "xi";
+        mac-termination-ohms = <43>;
       };
     };