diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless')
| -rw-r--r-- | Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 26 |
2 files changed, 32 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index ae661e65354e..017128394a3e 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -81,6 +81,12 @@ Optional properties: Definition: Name of external front end module used. Some valid FEM names for example: "microsemi-lx5586", "sky85703-11" and "sky85803" etc. +- qcom,snoc-host-cap-8bit-quirk: + Usage: Optional + Value type: <empty> + Definition: Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request +- qcom,xo-cal-data: xo cal offset to be configured in xo trim register. Example (to supply PCI based wifi block details): diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index bb2fcde6f7ff..f38950560982 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -35,3 +35,29 @@ Examples: ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ }; }; + +&mmc3 { + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; +}; |