diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
4 files changed, 14 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 43df15ba8fa4..13875eab2ed6 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -20,8 +20,6 @@ properties: - fsl,imx8qm-flexcan - fsl,imx8mp-flexcan - fsl,imx6q-flexcan - - fsl,imx53-flexcan - - fsl,imx35-flexcan - fsl,imx28-flexcan - fsl,imx25-flexcan - fsl,p1010-flexcan @@ -30,6 +28,11 @@ properties: - fsl,lx2160ar1-flexcan - items: - enum: + - fsl,imx53-flexcan + - fsl,imx35-flexcan + - const: fsl,imx25-flexcan + - items: + - enum: - fsl,imx7d-flexcan - fsl,imx6ul-flexcan - fsl,imx6sx-flexcan @@ -81,11 +84,12 @@ properties: req_bit is the bit offset of CAN stop request. $ref: /schemas/types.yaml#/definitions/phandle-array items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset of CAN stop request. - maximum: 0xff - - description: The 'req_bit' is the bit offset of CAN stop request. - maximum: 0x1f + items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f fsl,clk-source: description: | diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 3613c2c8f75d..0968b40aef1e 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -33,7 +33,7 @@ tcan4x5x: tcan4x5x@0 { spi-max-frequency = <10000000>; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; interrupt-parent = <&gpio1>; - interrupts = <14 GPIO_ACTIVE_LOW>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index cfaf88998918..9e4dc510a40a 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): clock-frequency = <100000>; interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_HIGH>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index 92f399ec22b8..2bd82562ce8e 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): clock-frequency = <400000>; interrupt-parent = <&gpio1>; - interrupts = <17 GPIO_ACTIVE_HIGH>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; |