diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
290 files changed, 22309 insertions, 6589 deletions
diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml new file mode 100644 index 000000000000..5718ab4654b2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl SoCs Ethernet MAC Controller + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + This Ethernet MAC is used on the Owl family of SoCs from Actions Semi. + It provides the RMII and SMII interfaces and is compliant with the + IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex + operation modes at 10/100 Mb/s data transfer rates. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: actions,owl-emac + - items: + - enum: + - actions,s500-emac + - const: actions,owl-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + additionalItems: false + items: + - const: eth + - const: rmii + + resets: + maxItems: 1 + + actions,ethcfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the device containing custom config. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - phy-mode + - phy-handle + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/actions,s500-cmu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/actions,s500-reset.h> + + ethernet@b0310000 { + compatible = "actions,s500-emac", "actions,owl-emac"; + reg = <0xb0310000 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>; + clock-names = "eth", "rmii"; + resets = <&cmu RESET_ETHERNET>; + phy-mode = "rmii"; + phy-handle = <ð_phy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@3 { + reg = <0x3>; + interrupt-parent = <&sirq>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index d95cc691a65f..929cf8c0b0fd 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADIN1200/ADIN1300 PHY maintainers: - - Alexandru Ardelean <alexandru.ardelean@analog.com> + - Alexandru Tachici <alexandru.tachici@analog.com> description: | Bindings for Analog Devices Industrial Ethernet PHYs @@ -36,6 +36,24 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 + adi,phy-output-clock: + description: | + Select clock output on GP_CLK pin. Two clocks are available: + A 25MHz reference and a free-running 125MHz. + The phy can alternatively automatically switch between the reference and + the 125MHz clocks based on its internal state. + $ref: /schemas/types.yaml#/definitions/string + enum: + - 25mhz-reference + - 125mhz-free-running + - adaptive-free-running + + adi,phy-output-reference-clock: + description: Enable 25MHz reference clock output on CLK25_REF pin. + type: boolean + +unevaluatedProperties: false + examples: - | ethernet { diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml new file mode 100644 index 000000000000..9de865295d7a --- /dev/null +++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/adi,adin1110.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADI ADIN1110 MAC-PHY + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + The ADIN1110 is a low power single port 10BASE-T1L MAC- + PHY designed for industrial Ethernet applications. It integrates + an Ethernet PHY core with a MAC and all the associated analog + circuitry, input and output clock buffering. + + The ADIN2111 is a low power, low complexity, two-Ethernet ports + switch with integrated 10BASE-T1L PHYs and one serial peripheral + interface (SPI) port. The device is designed for industrial Ethernet + applications using low power constrained nodes and is compliant + with the IEEE 802.3cg-2019 Ethernet standard for long reach + 10 Mbps single pair Ethernet (SPE). + + The device has a 4-wire SPI interface for communication + between the MAC and host processor. + +allOf: + - $ref: ethernet-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,adin1110 + - adi,adin2111 + + reg: + maxItems: 1 + + adi,spi-crc: + description: | + Enable CRC8 checks on SPI read/writes. + type: boolean + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "adi,adin2111"; + reg = <0>; + spi-max-frequency = <24500000>; + + adi,spi-crc; + + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + local-mac-address = [ 00 11 22 33 44 55 ]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index ae4796ec50a0..eb26623dab51 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings +title: Allwinner A10 EMAC Ethernet Controller allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: @@ -29,6 +29,10 @@ properties: allwinner,sram: description: Phandle to the device SRAM $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device required: - compatible diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml index e5562c525ed9..85f552b907f3 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 MDIO Controller Device Tree Bindings +title: Allwinner A10 MDIO Controller maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# # Select every compatible, including the deprecated ones. This way, we # will be able to report a warning when we have that compatible, since diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index f683b7104e3e..23e92be33ac8 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A20 GMAC Device Tree Bindings +title: Allwinner A20 GMAC allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 11654d4b80fb..7fe0352dff0f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -4,23 +4,26 @@ $id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A83t EMAC Device Tree Bindings +title: Allwinner A83t EMAC maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: oneOf: - const: allwinner,sun8i-a83t-emac - const: allwinner,sun8i-h3-emac - - const: allwinner,sun8i-r40-emac + - const: allwinner,sun8i-r40-gmac - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac - - const: allwinner,sun50i-a64-emac + - enum: + - allwinner,sun20i-d1-emac + - allwinner,sun50i-h6-emac + - allwinner,sun50i-h616-emac0 + - const: allwinner,sun50i-a64-emac reg: maxItems: 1 @@ -37,8 +40,11 @@ properties: clock-names: const: stmmaceth + phy-supply: + description: PHY regulator + syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the EMAC or GMAC clock register @@ -57,7 +63,7 @@ required: - syscon allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: @@ -91,7 +97,7 @@ allOf: compatible: contains: enum: - - allwinner,sun8i-r40-emac + - allwinner,sun8i-r40-gmac then: properties: @@ -114,33 +120,35 @@ allOf: then: properties: allwinner,leds-active-low: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: EPHY LEDs are active low. mdio-mux: type: object + unevaluatedProperties: false properties: compatible: const: allwinner,sun8i-h3-mdio-mux mdio-parent-bus: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to EMAC MDIO. + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + mdio@1: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: Internal MDIO Bus properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - compatible: const: allwinner,sun8i-h3-mdio-internal @@ -150,6 +158,8 @@ allOf: patternProperties: "^ethernet-phy@[0-9a-f]$": type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false description: Integrated PHY node @@ -166,16 +176,11 @@ allOf: mdio@2: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: External MDIO Bus (H3 only) properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: const: 2 diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt deleted file mode 100644 index 0b7d4d3758ea..000000000000 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ /dev/null @@ -1,113 +0,0 @@ -* Altera Triple-Speed Ethernet MAC driver (TSE) - -Required properties: -- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should - be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. - ALTR is supported for legacy device trees, but is deprecated. - altr should be used for all new designs. -- reg: Address and length of the register set for the device. It contains - the information of registers in the same order as described by reg-names -- reg-names: Should contain the reg names - "control_port": MAC configuration space region - "tx_csr": xDMA Tx dispatcher control and status space region - "tx_desc": MSGDMA Tx dispatcher descriptor space region - "rx_csr" : xDMA Rx dispatcher control and status space region - "rx_desc": MSGDMA Rx dispatcher descriptor space region - "rx_resp": MSGDMA Rx dispatcher response space region - "s1": SGDMA descriptor memory -- interrupts: Should contain the TSE interrupts and it's mode. -- interrupt-names: Should contain the interrupt names - "rx_irq": xDMA Rx dispatcher interrupt - "tx_irq": xDMA Tx dispatcher interrupt -- rx-fifo-depth: MAC receive FIFO buffer depth in bytes -- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes -- phy-mode: See ethernet.txt in the same directory. -- phy-handle: See ethernet.txt in the same directory. -- phy-addr: See ethernet.txt in the same directory. A configuration should - include phy-handle or phy-addr. -- altr,has-supplementary-unicast: - If present, TSE supports additional unicast addresses. - Otherwise additional unicast addresses are not supported. -- altr,has-hash-multicast-filter: - If present, TSE supports a hash based multicast filter. - Otherwise, hash-based multicast filtering is not supported. - -- mdio device tree subnode: When the TSE has a phy connected to its local - mdio, there must be device tree subnode with the following - required properties: - - - compatible: Must be "altr,tse-mdio". - - #address-cells: Must be <1>. - - #size-cells: Must be <0>. - - For each phy on the mdio bus, there must be a node with the following - fields: - - - reg: phy id used to communicate to phy. - - device_type: Must be "ethernet-phy". - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -Example: - - tse_sub_0_eth_tse_0: ethernet@1,00000000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00000000 0x00000400>, - <0x00000001 0x00000460 0x00000020>, - <0x00000001 0x00000480 0x00000020>, - <0x00000001 0x000004A0 0x00000008>, - <0x00000001 0x00000400 0x00000020>, - <0x00000001 0x00000420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 41 4>, <0 40 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy0>; - mdio { - compatible = "altr,tse-mdio"; - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0x0>; - device_type = "ethernet-phy"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - }; - }; - - tse_sub_1_eth_tse_0: ethernet@1,00001000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00001000 0x00000400>, - <0x00000001 0x00001460 0x00000020>, - <0x00000001 0x00001480 0x00000020>, - <0x00000001 0x000014A0 0x00000008>, - <0x00000001 0x00001400 0x00000020>, - <0x00000001 0x00001420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 43 4>, <0 42 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy1>; - }; diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml new file mode 100644 index 000000000000..f5d3b70af07a --- /dev/null +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/altr,tse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Triple Speed Ethernet MAC driver (TSE) + +maintainers: + - Maxime Chevallier <maxime.chevallier@bootlin.com> + +properties: + compatible: + oneOf: + - const: altr,tse-1.0 + - const: ALTR,tse-1.0 + deprecated: true + - const: altr,tse-msgdma-1.0 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: rx_irq + - const: tx_irq + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the RX FIFO + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the TX FIFO + + altr,has-supplementary-unicast: + type: boolean + description: + If present, TSE supports additional unicast addresses. + + altr,has-hash-multicast-filter: + type: boolean + description: + If present, TSE supports hash based multicast filter. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: altr,tse-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - rx-fifo-depth + - tx-fifo-depth + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - altr,tse-1.0 + - ALTR,tse-1.0 + then: + properties: + reg: + minItems: 4 + reg-names: + items: + - const: control_port + - const: rx_csr + - const: tx_csr + - const: s1 + + - if: + properties: + compatible: + contains: + enum: + - altr,tse-msgdma-1.0 + then: + properties: + reg: + minItems: 6 + maxItems: 7 + reg-names: + minItems: 6 + items: + - const: control_port + - const: rx_csr + - const: rx_desc + - const: rx_resp + - const: tx_csr + - const: tx_desc + - const: pcs + +unevaluatedProperties: false + +examples: + - | + tse_sub_0: ethernet@c0100000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0xc0100000 0x00000400>, + <0xc0101000 0x00000020>, + <0xc0102000 0x00000020>, + <0xc0103000 0x00000008>, + <0xc0104000 0x00000020>, + <0xc0105000 0x00000020>, + <0xc0106000 0x00000100>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs"; + interrupt-parent = <&intc>; + interrupts = <0 44 4>,<0 45 4>; + interrupt-names = "rx_irq","tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + sfp = <&sfp0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + - | + tse_sub_1_eth_tse_0: ethernet@1,00001000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0x00001000 0x00000400>, + <0x00001460 0x00000020>, + <0x00001480 0x00000020>, + <0x000014A0 0x00000008>, + <0x00001400 0x00000020>, + <0x00001420 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 43 4>, <0 42 4>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-mode = "gmii"; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + phy-handle = <&phy1>; + mdio { + compatible = "altr,tse-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml new file mode 100644 index 000000000000..ec5c038ce6a0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/amlogic,g12a-mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO bus multiplexer/glue of Amlogic G12a SoC family + +description: + This is a special case of a MDIO bus multiplexer. It allows to choose between + the internal mdio bus leading to the embedded 10/100 PHY or the external + MDIO bus. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: mdio-mux.yaml# + +properties: + compatible: + const: amlogic,g12a-mdio-mux + + reg: + maxItems: 1 + + clocks: + items: + - description: peripheral clock + - description: platform crytal + - description: SoC 50MHz MPLL + + clock-names: + items: + - const: pclk + - const: clkin0 + - const: clkin1 + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x4c000 0xa4>; + clocks = <&clkc_eth_phy>, <&xtal>, <&clkc_mpll>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml new file mode 100644 index 000000000000..27ae004dbea0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/amlogic,gxl-mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic GXL MDIO bus multiplexer + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +description: + This is a special case of a MDIO bus multiplexer. It allows to choose between + the internal mdio bus leading to the embedded 10/100 PHY or the external + MDIO bus on the Amlogic GXL SoC family. + +allOf: + - $ref: mdio-mux.yaml# + +properties: + compatible: + const: amlogic,gxl-mdio-mux + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + eth_phy_mux: mdio@558 { + compatible = "amlogic,gxl-mdio-mux"; + reg = <0x558 0xc>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&refclk>; + clock-names = "ref"; + mdio-parent-bus = <&mdio0>; + + external_mdio: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + internal_mdio: mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index ae91aa9d8616..ee7a65b528cd 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson DWMAC Ethernet controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Martin Blumenstingl <martin.blumenstingl@googlemail.com> # We need a select here so we don't match all nodes with 'snps,dwmac' @@ -22,11 +22,12 @@ select: - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - amlogic,meson-g12a-dwmac required: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: @@ -36,25 +37,28 @@ allOf: - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - amlogic,meson-g12a-dwmac then: properties: clocks: + minItems: 3 items: - description: GMAC main clock - description: First parent clock of the internal mux - description: Second parent clock of the internal mux + - description: The clock which drives the timing adjustment logic clock-names: minItems: 3 - maxItems: 3 items: - const: stmmaceth - const: clkin0 - const: clkin1 + - const: timing-adjustment amlogic,tx-delay-ns: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The internal RGMII TX clock delay (provided by this driver) in nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns. @@ -67,6 +71,62 @@ allOf: PHY and MAC are adding a delay). Any configuration is ignored when the phy-mode is set to "rmii". + amlogic,rx-delay-ns: + deprecated: true + enum: + - 0 + - 2 + default: 0 + description: + The internal RGMII RX clock delay in nanoseconds. Deprecated, use + rx-internal-delay-ps instead. + + rx-internal-delay-ps: + default: 0 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8b-dwmac + - amlogic,meson8m2-dwmac + - amlogic,meson-gxbb-dwmac + - amlogic,meson-axg-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 2000 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 200 + - 400 + - 600 + - 800 + - 1000 + - 1200 + - 1400 + - 1600 + - 1800 + - 2000 + - 2200 + - 2400 + - 2600 + - 2800 + - 3000 + properties: compatible: additionalItems: true @@ -78,6 +138,7 @@ properties: - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - amlogic,meson-g12a-dwmac contains: enum: - snps,dwmac-3.70a @@ -100,6 +161,8 @@ required: - clock-names - phy-mode +unevaluatedProperties: false + examples: - | ethmac: ethernet@c9410000 { @@ -107,7 +170,7 @@ examples: reg = <0xc9410000 0x10000>, <0xc8834540 0x8>; interrupts = <8>; interrupt-names = "macirq"; - clocks = <&clk_eth>, <&clkc_fclk_div2>, <&clk_mpll2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; phy-mode = "rgmii"; }; diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml new file mode 100644 index 000000000000..768504ccbf74 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88178.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88172/AX88772 USB Ethernet Controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired USB Ethernet devices. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usbb95,1720 # ASIX AX88172 + - usbb95,172a # ASIX AX88172A + - usbb95,1780 # ASIX AX88178 + - usbb95,7720 # ASIX AX88772 + - usbb95,772a # ASIX AX88772A + - usbb95,772b # ASIX AX88772B + - usbb95,7e2b # ASIX AX88772B + + reg: + maxItems: 1 + + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,7e2b"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb1234,5678"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,772b"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..6b849a4349c0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + controller-data: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index 71808e78a495..d6ef468495c5 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -15,28 +15,36 @@ description: |+ MAC. allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: const: aspeed,ast2600-mdio + reg: maxItems: 1 description: The register range of the MDIO controller instance + resets: + maxItems: 1 + required: - compatible - reg - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | + #include <dt-bindings/clock/ast2600-clock.h> mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; + resets = <&syscon ASPEED_RESET_MII>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt deleted file mode 100644 index 94797df751b8..000000000000 --- a/Documentation/devicetree/bindings/net/bluetooth.txt +++ /dev/null @@ -1,5 +0,0 @@ -The following properties are common to the Bluetooth controllers: - -- local-bd-address: array of 6 bytes, specifies the BD address that was - uniquely assigned to the Bluetooth device, formatted with least significant - byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml new file mode 100644 index 000000000000..59bb0d7e8ab3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/bluetooth-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bluetooth Controller Common Properties + +maintainers: + - Marcel Holtmann <marcel@holtmann.org> + - Johan Hedberg <johan.hedberg@gmail.com> + - Luiz Augusto von Dentz <luiz.dentz@gmail.com> + +properties: + $nodename: + pattern: "^bluetooth(@.*)?$" + + local-bd-address: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 6 + description: + Specifies the BD address that was uniquely assigned to the Bluetooth + device. Formatted with least significant byte first (little-endian), e.g. + in order to assign the address 00:11:22:33:44:55 this property must have + the value [55 44 33 22 11 00]. + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml new file mode 100644 index 000000000000..37cb39a3a62e --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4377 family PCIe Bluetooth Chips + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: + This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips + usually found in Apple machines. The Wi-Fi part of the chip is described in + bindings/net/wireless/brcm,bcm4329-fmac.yaml. + +allOf: + - $ref: bluetooth-controller.yaml# + +properties: + compatible: + enum: + - pci14e4,5fa0 # BCM4377 + - pci14e4,5f69 # BCM4378 + - pci14e4,5f71 # BCM4387 + + reg: + maxItems: 1 + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Board type of the Bluetooth chip. This is used to decouple + the overall system board from the Bluetooth module and used to construct + firmware and calibration data filenames. + On Apple platforms, this should be the Apple module-instance codename + prefixed by "apple,", e.g. "apple,atlantisb". + pattern: '^apple,.*' + + brcm,taurus-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Bluetooth radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device. + This blob is used if the chip stepping of the Bluetooth module does not + support beamforming. + + brcm,taurus-bf-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Bluetooth radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device. + This blob is used if the chip stepping of the Bluetooth module supports + beamforming. + + local-bd-address: true + +required: + - compatible + - reg + - local-bd-address + - brcm,board-type + +additionalProperties: false + +examples: + - | + pcie@a0000000 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0xa0000000 0x1000000>; + device_type = "pci"; + ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>; + + bluetooth@0,1 { + compatible = "pci14e4,5f69"; + reg = <0x100 0x0 0x0 0x0 0x0>; + brcm,board-type = "apple,honshu"; + /* To be filled by the bootloader */ + local-bd-address = [00 00 00 00 00 00]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml new file mode 100644 index 000000000000..f01a3988538c --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Bluetooth chips + +description: + This binding describes UART-attached NXP bluetooth chips. These chips + are dual-radio chips supporting WiFi and Bluetooth. The bluetooth + works on standard H4 protocol over 4-wire UART. The RTS and CTS lines + are used during FW download. To enable power save mode, the host + asserts break signal over UART-TX line to put the chip into power save + state. De-asserting break wakes up the BT chip. + +maintainers: + - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> + +properties: + compatible: + enum: + - nxp,88w8987-bt + - nxp,88w8997-bt + + fw-init-baudrate: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 115200 + description: + Chip baudrate after FW is downloaded and initialized. + This property depends on the module vendor's + configuration. + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + bluetooth { + compatible = "nxp,88w8987-bt"; + fw-init-baudrate = <3000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml new file mode 100644 index 000000000000..eba2f3026ab0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -0,0 +1,230 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Bluetooth Chips + +maintainers: + - Balakrishna Godavarthi <bgodavar@codeaurora.org> + - Rocky Liao <rjliao@codeaurora.org> + +description: + This binding describes Qualcomm UART-attached bluetooth chips. + +properties: + compatible: + enum: + - qcom,qca2066-bt + - qcom,qca6174-bt + - qcom,qca9377-bt + - qcom,wcn3988-bt + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + - qcom,qca6390-bt + - qcom,wcn6750-bt + - qcom,wcn6855-bt + - qcom,wcn7850-bt + + enable-gpios: + maxItems: 1 + description: gpio specifier used to enable chip + + swctrl-gpios: + maxItems: 1 + description: gpio specifier is used to find status + of clock supply to SoC + + clocks: + maxItems: 1 + description: clock provided to the controller (SUSCLK_32KHZ) + + vddio-supply: + description: VDD_IO supply regulator handle + + vddxo-supply: + description: VDD_XO supply regulator handle + + vddrf-supply: + description: VDD_RF supply regulator handle + + vddch0-supply: + description: VDD_CH0 supply regulator handle + + vddch1-supply: + description: VDD_CH1 supply regulator handle + + vddaon-supply: + description: VDD_AON supply regulator handle + + vdddig-supply: + description: VDD_DIG supply regulator handle + + vddbtcxmx-supply: + description: VDD_BT_CXMX supply regulator handle + + vddrfacmn-supply: + description: VDD_RFA_CMN supply regulator handle + + vddrfa0p8-supply: + description: VDD_RFA_0P8 suppply regulator handle + + vddrfa1p7-supply: + description: VDD_RFA_1P7 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + + vddrfa2p2-supply: + description: VDD_RFA_2P2 supply regulator handle + + vddasd-supply: + description: VDD_ASD supply regulator handle + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml + + firmware-name: + description: specify the name of nvm firmware to load + + local-bd-address: true + + +required: + - compatible + +additionalProperties: false + +allOf: + - $ref: bluetooth-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,qca2066-bt + - qcom,qca6174-bt + then: + required: + - enable-gpios + - clocks + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3988-bt + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + then: + required: + - vddio-supply + - vddxo-supply + - vddrf-supply + - vddch0-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vddbtcxmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p7-supply + - vddrfa1p2-supply + - vddasd-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6855-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddbtcxmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p7-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn7850-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vdddig-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p9-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + + bluetooth { + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + firmware-name = "crnv21.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddio-supply = <&vreg_l19b_1p8>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + firmware-name = "msnv11.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt deleted file mode 100644 index 0120ebe93262..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ /dev/null @@ -1,30 +0,0 @@ -Broadcom AMAC Ethernet Controller Device Tree Bindings -------------------------------------------------------------- - -Required properties: - - compatible: "brcm,amac" - "brcm,nsp-amac" - "brcm,ns2-amac" - - reg: Address and length of the register set for the device. It - contains the information of registers in the same order as - described by reg-names - - reg-names: Names of the registers. - "amac_base": Address and length of the GMAC registers - "idm_base": Address and length of the GMAC IDM registers - (required for NSP and Northstar2) - "nicpm_base": Address and length of the NIC Port Manager - registers (required for Northstar2) - - interrupts: Interrupt number - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Examples: - -amac0: ethernet@18022000 { - compatible = "brcm,nsp-amac"; - reg = <0x18022000 0x1000>, - <0x18110000 0x1000>; - reg-names = "amac_base", "idm_base"; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml new file mode 100644 index 000000000000..210fb29c4e7b --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,amac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom AMAC Ethernet Controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - brcm,amac + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-amac + then: + properties: + reg: + minItems: 2 + maxItems: 2 + reg-names: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-amac + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + +properties: + compatible: + enum: + - brcm,amac + - brcm,nsp-amac + - brcm,ns2-amac + + interrupts: + maxItems: 1 + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: amac_base + - const: idm_base + - const: nicpm_base + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + amac0: ethernet@18022000 { + compatible = "brcm,nsp-amac"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml new file mode 100644 index 000000000000..75d8138298fb --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom ASP 2.0 Ethernet controller + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom Ethernet controller first introduced with 72165 + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm74165-asp + - const: brcm,asp-v2.1 + - items: + - enum: + - brcm,bcm72165-asp + - const: brcm,asp-v2.0 + + "#address-cells": + const: 1 + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: true + + interrupts: + minItems: 1 + items: + - description: RX/TX interrupt + - description: Port 0 Wake-on-LAN + - description: Port 1 Wake-on-LAN + + clocks: + maxItems: 1 + + ethernet-ports: + type: object + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-9a-f]+$": + type: object + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: Port number + + brcm,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ASP Channel Number + + The depacketizer channel that consumes packets from + the unimac/port. + + required: + - reg + - brcm,channel + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + ASP internal UniMAC MDIO bus + +required: + - compatible + - reg + - interrupts + - clocks + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@9c00000 { + compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + reg = <0x9c00000 0x1fff14>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x0 0x9c00000 0x1fff14>; + clocks = <&scmi 14>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@c614 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xc614 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + mdio@ce14 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xce14 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + brcm,channel = <8>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + brcm,channel = <9>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml new file mode 100644 index 000000000000..a93d2f165899 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 Ethernet controller + +description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: brcm,bcm4908-enet + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: RX interrupt + - description: TX interrupt + + interrupt-names: + minItems: 1 + items: + - const: rx + - const: tx + +required: + - reg + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@80002000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x80002000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml new file mode 100644 index 000000000000..9ef28c2a0afc --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm6368-mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 MDIO bus multiplexer + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + +description: + This MDIO bus multiplexer defines buses that could be internal as well as + external to SoCs. When child bus is selected, one needs to select these two + properties as well to generate desired MDIO transaction on appropriate bus. + +allOf: + - $ref: mdio-mux.yaml# + +properties: + compatible: + const: brcm,bcm6368-mdio-mux + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio0: mdio@10e000b0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6368-mdio-mux"; + reg = <0x10e000b0 0x6>; + + mdio_int: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + mdio_ext: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 48a7f916c5e4..284cddb3118e 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,101 +1,13 @@ -* Broadcom Starfighter 2 integrated swich +* Broadcom Starfighter 2 integrated switch -Required properties: +See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. -- compatible: should be one of - "brcm,bcm7445-switch-v4.0" - "brcm,bcm7278-switch-v4.0" - "brcm,bcm7278-switch-v4.8" -- reg: addresses and length of the register sets for the device, must be 6 - pairs of register addresses and lengths -- interrupts: interrupts for the devices, must be two interrupts -- #address-cells: must be 1, see dsa/dsa.txt -- #size-cells: must be 0, see dsa/dsa.txt - -Deprecated binding required properties: +*Deprecated* binding required properties: - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt - #address-cells: must be 2, see dsa/dsa.txt -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. - -Optional properties: - -- reg-names: litteral names for the device base register addresses, when present - must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" - -- interrupt-names: litternal names for the device interrupt lines, when present - must be: "switch_0" and "switch_1" - -- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the - switch - -- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported - by the switch - -- brcm,fcb-pause-override: boolean property, if present indicates that the switch - supports Failover Control Block pause override capability - -- brcm,acb-packets-inflight: boolean property, if present indicates that the switch - Admission Control Block supports reporting the number of packets in-flight in a - switch queue - -- resets: a single phandle and reset identifier pair. See - Documentation/devicetree/binding/reset/reset.txt for details. - -- reset-names: If the "reset" property is specified, this property should have - the value "switch" to denote the switch reset line. - -Port subnodes: - -Optional properties: - -- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch - port has Broadcom tags enabled (per-packet metadata) - -Example: - -switch_top@f0b00000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0xf0b00000 0x40804>; - - ethernet_switch@0 { - compatible = "brcm,bcm7445-switch-v4.0"; - #size-cells = <0>; - #address-cells = <1>; - reg = <0x0 0x40000 - 0x40000 0x110 - 0x40340 0x30 - 0x40380 0x30 - 0x40400 0x34 - 0x40600 0x208>; - reg-names = "core", "reg", intrl2_0", "intrl2_1", - "fcb, "acb"; - interrupts = <0 0x18 0 - 0 0x19 0>; - brcm,num-gphy = <1>; - brcm,num-rgmii-ports = <2>; - brcm,fcb-pause-override; - brcm,acb-packets-inflight; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - label = "gphy"; - reg = <0>; - }; - }; - }; -}; - Example using the old DSA DeviceTree binding: switch_top@f0b00000 { @@ -125,7 +37,7 @@ switch_top@f0b00000 { switch@0 { reg = <0 0>; #size-cells = <0>; - #address-cells <1>; + #address-cells = <1>; port@0 { label = "gphy"; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt deleted file mode 100644 index 33a0d67e4ce5..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Broadcom BCM7xxx Ethernet Controller (GENET) - -Required properties: -- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2", - "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5". -- reg: address and length of the register set for the device -- interrupts and/or interrupts-extended: must be two cells, the first cell - is the general purpose interrupt line, while the second cell is the - interrupt for the ring RX and TX queues operating in ring mode. An - optional third interrupt cell for Wake-on-LAN can be specified. - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - for information on the property specifics. -- phy-mode: see ethernet.txt file in the same directory -- #address-cells: should be 1 -- #size-cells: should be 1 - -Optional properties: -- clocks: When provided, must be two phandles to the functional clocks nodes - of the GENET block. The first phandle is the main GENET clock used during - normal operation, while the second phandle is the Wake-on-LAN clock. -- clock-names: When provided, names of the functional clock phandles, first - name should be "enet" and second should be "enet-wol". - -- phy-handle: See ethernet.txt file in the same directory; used to describe - configurations where a PHY (internal or external) is used. - -- fixed-link: When the GENET interface is connected to a MoCA hardware block or - when operating in a RGMII to RGMII type of connection, or when the MDIO bus is - voluntarily disabled, this property should be used to describe the "fixed link". - See Documentation/devicetree/bindings/net/fixed-link.txt for information on - the property specifics - -Required child nodes: - -- mdio bus node: this node should always be present regardless of the PHY - configuration of the GENET instance - -MDIO bus node required properties: - -- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2" - "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version - has to match the parent node compatible property (e.g: brcm,genet-v4 pairs - with brcm,genet-mdio-v4) -- reg: address and length relative to the parent node base register address -- #address-cells: address cell for MDIO bus addressing, should be 1 -- #size-cells: size of the cells for MDIO bus addressing, should be 0 - -Ethernet PHY node properties: - -See Documentation/devicetree/bindings/net/phy.txt for the list of required and -optional properties. - -Internal Gigabit PHY example: - -ethernet@f0b60000 { - phy-mode = "internal"; - phy-handle = <&phy1>; - mac-address = [ 00 10 18 36 23 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b60000 0xfc4c>; - interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy1: ethernet-phy@1 { - max-speed = <1000>; - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -MoCA interface / MAC to MAC example: - -ethernet@f0b80000 { - phy-mode = "moca"; - fixed-link = <1 0 1000 0 0>; - mac-address = [ 00 10 18 36 24 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b80000 0xfc4c>; - interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - }; -}; - - -External MDIO-connected Gigabit PHY/switch: - -ethernet@f0ba0000 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - mac-address = [ 00 10 18 36 26 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0ba0000 0xfc4c>; - interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy0: ethernet-phy@0 { - max-speed = <1000>; - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml new file mode 100644 index 000000000000..7c90a4390531 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7xxx Ethernet Controller (GENET) + +maintainers: + - Doug Berger <opendmb@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + enum: + - brcm,genet-v1 + - brcm,genet-v2 + - brcm,genet-v3 + - brcm,genet-v4 + - brcm,genet-v5 + - brcm,bcm2711-genet-v5 + - brcm,bcm7712-genet-v5 + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: general purpose interrupt line + - description: RX and TX rings interrupt line + - description: Wake-on-LAN interrupt line + + + clocks: + minItems: 1 + items: + - description: main clock + - description: EEE clock + - description: Wake-on-LAN clock + + clock-names: + minItems: 1 + items: + - const: enet + - const: enet-eee + - const: enet-wol + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + GENET internal UniMAC MDIO bus + +required: + - reg + - interrupts + - phy-mode + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: ethernet-controller.yaml + +unevaluatedProperties: false + +examples: + - | + ethernet@f0b60000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v4"; + reg = <0xf0b60000 0xfc4c>; + interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio0: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <1000>; + reg = <1>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + - | + ethernet@f0b80000 { + phy-mode = "moca"; + fixed-link = <1 0 1000 0 0>; + mac-address = [ 00 10 18 36 24 1a ]; + compatible = "brcm,genet-v4"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf0b80000 0xfc4c>; + interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; + + mdio1: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + }; + }; + + - | + ethernet@f0ba0000 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mac-address = [ 00 10 18 36 26 1a ]; + compatible = "brcm,genet-v4"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf0ba0000 0xfc4c>; + interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; + + mdio2: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + + phy0: ethernet-phy@0 { + max-speed = <1000>; + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt deleted file mode 100644 index 8ba9ed11d716..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom iProc MDIO bus controller - -Required properties: -- compatible: should be "brcm,iproc-mdio" -- reg: address and length of the register set for the MDIO interface -- #size-cells: must be 1 -- #address-cells: must be 0 - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@18002000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; - - enet-gphy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml new file mode 100644 index 000000000000..3031395f7e6e --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc MDIO bus controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: brcm,iproc-mdio + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt deleted file mode 100644 index b58843f29591..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt +++ /dev/null @@ -1,62 +0,0 @@ -Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs. - -This MDIO bus multiplexer defines buses that could be internal as well as -external to SoCs and could accept MDIO transaction compatible to C-22 or -C-45 Clause. When child bus is selected, one needs to select these two -properties as well to generate desired MDIO transaction on appropriate bus. - -Required properties in addition to the generic multiplexer properties: - -MDIO multiplexer node: -- compatible: brcm,mdio-mux-iproc. - -Every non-ethernet PHY requires a compatible so that it could be probed based -on this compatible string. - -Optional properties: -- clocks: phandle of the core clock which drives the mdio block. - -Additional information regarding generic multiplexer properties can be found -at- Documentation/devicetree/bindings/net/mdio-mux.txt - - -for example: - mdio_mux_iproc: mdio-mux@66020000 { - compatible = "brcm,mdio-mux-iproc"; - reg = <0x66020000 0x250>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - - mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml new file mode 100644 index 000000000000..af96b4fd89d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO bus multiplexer found in Broadcom iProc based SoCs. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + This MDIO bus multiplexer defines buses that could be internal as well as + external to SoCs and could accept MDIO transaction compatible to C-22 or + C-45 Clause. When child bus is selected, one needs to select these two + properties as well to generate desired MDIO transaction on appropriate bus. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: brcm,mdio-mux-iproc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: core clock driving the MDIO block + + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio_mux_iproc: mdio-mux@66020000 { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x66020000 0x250>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy0: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy1: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt deleted file mode 100644 index 83f29e0e11ba..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,systemport.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) - -Required properties: -- compatible: should be one of: - "brcm,systemport-v1.00" - "brcm,systemportlite-v1.00" or - "brcm,systemport" -- reg: address and length of the register set for the device. -- interrupts: interrupts for the device, first cell must be for the rx - interrupts, and the second cell should be for the transmit queues. An - optional third interrupt cell for Wake-on-LAN can be specified -- local-mac-address: Ethernet MAC address (48 bits) of this adapter -- phy-mode: Should be a string describing the PHY interface to the - Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt -- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for - the property specific details - -Optional properties: -- systemport,num-tier2-arb: number of tier 2 arbiters, an integer -- systemport,num-tier1-arb: number of tier 1 arbiters, an integer -- systemport,num-txq: number of HW transmit queues, an integer -- systemport,num-rxq: number of HW receive queues, an integer - -Example: -ethernet@f04a0000 { - compatible = "brcm,systemport-v1.00"; - reg = <0xf04a0000 0x4650>; - local-mac-address = [ 00 11 22 33 44 55 ]; - fixed-link = <0 1 1000 0 0>; - phy-mode = "gmii"; - interrupts = <0x0 0x16 0x0>, - <0x0 0x17 0x0>; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml new file mode 100644 index 000000000000..b40006d44791 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,systemport.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + enum: + - brcm,systemport-v1.00 + - brcm,systemportlite-v1.00 + - brcm,systemport + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: interrupt line for RX queues + - description: interrupt line for TX queues + - description: interrupt line for Wake-on-LAN + + clocks: + items: + - description: main clock + - description: Wake-on-LAN clock + + clock-names: + items: + - const: sw_sysport + - const: sw_sysportwol + + systemport,num-tier2-arb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of tier 2 arbiters + + systemport,num-tier1-arb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of tier 2 arbiters + + systemport,num-txq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: + Number of HW transmit queues + + systemport,num-rxq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: + Number of HW receive queues + +required: + - reg + - interrupts + - phy-mode + +allOf: + - $ref: ethernet-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + ethernet@f04a0000 { + compatible = "brcm,systemport-v1.00"; + reg = <0xf04a0000 0x4650>; + local-mac-address = [ 00 11 22 33 44 55 ]; + phy-mode = "gmii"; + interrupts = <0x0 0x16 0x0>, + <0x0 0x17 0x0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt deleted file mode 100644 index e15589f47787..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Broadcom UniMAC MDIO bus controller - -Required properties: -- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2", - "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or - "brcm,unimac-mdio" -- reg: address and length of the register set for the device, first one is the - base register, and the second one is optional and for indirect accesses to - larger than 16-bits MDIO transactions -- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw" -- #size-cells: must be 1 -- #address-cells: must be 0 - -Optional properties: -- interrupts: must be one if the interrupt is shared with the Ethernet MAC or - Ethernet switch this MDIO block is integrated from, or must be two, if there - are two separate interrupts, first one must be "mdio done" and second must be - for "mdio error" -- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed - to this hardware block, or must be "mdio_done" for the first interrupt and - "mdio_error" for the second when there are separate interrupts -- clocks: A reference to the clock supplying the MDIO bus controller -- clock-frequency: the MDIO bus clock that must be output by the MDIO bus - hardware, if absent, the default hardware values are used - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@403c0 { - compatible = "brcm,unimac-mdio"; - reg = <0x403c0 0x8 0x40300 0x18>; - reg-names = "mdio", "mdio_indir_rw"; - #size-cells = <1>; - #address-cells = <0>; - - ... - phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml new file mode 100644 index 000000000000..6684810fcbf0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,unimac-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom UniMAC MDIO bus controller + +maintainers: + - Doug Berger <opendmb@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + enum: + - brcm,genet-mdio-v1 + - brcm,genet-mdio-v2 + - brcm,genet-mdio-v3 + - brcm,genet-mdio-v4 + - brcm,genet-mdio-v5 + - brcm,asp-v2.0-mdio + - brcm,asp-v2.1-mdio + - brcm,unimac-mdio + + reg: + minItems: 1 + items: + - description: base register + - description: indirect accesses to larger than 16-bits MDIO transactions + + reg-names: + minItems: 1 + items: + - const: mdio + - const: mdio_indir_rw + + interrupts: + oneOf: + - description: > + Interrupt shared with the Ethernet MAC or Ethernet switch this MDIO + block is integrated from + - items: + - description: | + "mdio done" interrupt + - description: | + "mdio error" interrupt + + interrupt-names: + oneOf: + - const: mdio_done_error + - items: + - const: mdio_done + - const: mdio_error + + clocks: + description: A reference to the clock supplying the MDIO bus controller + + clock-frequency: + description: > + The MDIO bus clock that must be output by the MDIO bus hardware, if + absent, the default hardware values are used + +unevaluatedProperties: false + +required: + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + mdio@403c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x403c0 0x8>, <0x40300 0x18>; + reg-names = "mdio", "mdio_indir_rw"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt deleted file mode 100644 index f16b99571af1..000000000000 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ /dev/null @@ -1,45 +0,0 @@ -Broadcom Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Broadcom devices. - -Serial attached Broadcom devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - - compatible: should contain one of the following: - * "brcm,bcm20702a1" - * "brcm,bcm4330-bt" - * "brcm,bcm43438-bt" - * "brcm,bcm4345c5" - * "brcm,bcm43540-bt" - * "brcm,bcm4335a0" - -Optional properties: - - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt - - shutdown-gpios: GPIO specifier, used to enable the BT module - - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor - - clocks: 1 or 2 clocks as defined in clock-names below, in that order - - clock-names: names for clock inputs, matching the clocks given - - "extclk": deprecated, replaced by "txco" - - "txco": external reference clock (not a standalone crystal) - - "lpo": external low power 32.768 kHz clock - - vbat-supply: phandle to regulator supply for VBAT - - vddio-supply: phandle to regulator supply for VDDIO - - -Example: - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <921600>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml new file mode 100644 index 000000000000..cc70b00c6ce5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Bluetooth Chips + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + This binding describes Broadcom UART-attached bluetooth chips. + +properties: + compatible: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm4334-bt + - brcm,bcm43430a0-bt + - brcm,bcm43430a1-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + - brcm,bcm4349-bt + - cypress,cyw4373a0-bt + - infineon,cyw55572-bt + + shutdown-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_REG_ON used to + power on the BT module + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_RST_N used to + reset the BT module. This should be marked as + GPIO_ACTIVE_LOW. + + device-wakeup-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_WAKE used to + wakeup the controller. This is using the BT_GPIO_0 + pin on the chip when in use. + + host-wakeup-gpios: + maxItems: 1 + deprecated: true + description: GPIO specifier for the line HOST_WAKE used + to wakeup the host processor. This is using he BT_GPIO_1 + pin on the chip when in use. This is deprecated and replaced + by interrupts and "host-wakeup" interrupt-names + + clocks: + minItems: 1 + maxItems: 2 + description: 1 or 2 clocks as defined in clock-names below, + in that order + + clock-names: + description: Names of the 1 to 2 supplied clocks + oneOf: + - const: extclk + deprecated: true + description: Deprecated in favor of txco + + - const: txco + description: > + external reference clock (not a standalone crystal) + + - const: lpo + description: > + external low power 32.768 kHz clock + + - items: + - const: txco + - const: lpo + + vbat-supply: + description: phandle to regulator supply for VBAT + + vddio-supply: + description: phandle to regulator supply for VDDIO + + brcm,bt-pcm-int-params: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 5 + maxItems: 5 + description: |- + configure PCM parameters via a 5-byte array: + sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S + pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + pcm-frame-type: short, long + pcm-sync-mode: slave, master + pcm-clock-mode: slave, master + + brcm,requires-autobaud-mode: + type: boolean + description: + Set this property if autobaud mode is required. Autobaud mode is required + if the device's initial baud rate in normal mode is not supported by the + host or if the device requires autobaud mode startup before loading FW. + + interrupts: + items: + - description: Handle to the line HOST_WAKE used to wake + up the host processor. This uses the BT_GPIO_1 pin on + the chip when in use. + + interrupt-names: + items: + - const: host-wakeup + + max-speed: true + current-speed: true + +required: + - compatible + +dependencies: + brcm,requires-autobaud-mode: [ shutdown-gpios ] + +if: + not: + properties: + compatible: + contains: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt +then: + properties: + reset-gpios: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + uart { + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <921600>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index b1ad6ee68e90..f546b1f7dd6d 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -4,7 +4,7 @@ Generic Bluetooth controller over USB (btusb driver) Required properties: - compatible : should comply with the format "usbVID,PID" specified in - Documentation/devicetree/bindings/usb/usb-device.txt + Documentation/devicetree/bindings/usb/usb-device.yaml At the time of writing, the only OF supported devices (more may be added later) are: @@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: compatible = "usb1286,204e"; reg = <1>; interrupt-parent = <&gpio0>; - interrupt-name = "wakeup"; + interrupt-names = "wakeup"; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt deleted file mode 100644 index c8ae996bd8f2..000000000000 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Calxeda Highbank 10Gb XGMAC Ethernet - -Required properties: -- compatible : Should be "calxeda,hb-xgmac" -- reg : Address and length of the register set for the device -- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. - The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - -ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; -}; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml new file mode 100644 index 000000000000..c3ca26666ede --- /dev/null +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank 10Gb XGMAC Ethernet controller + +description: | + The Calxeda XGMAC Ethernet controllers are directly connected to the + internal machine "network fabric", which is set up, initialised and + managed by the firmware. So there are no PHY properties in this + binding. Switches in the fabric take care of routing and mapping the + traffic to external network ports. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-xgmac + + reg: + maxItems: 1 + + interrupts: + description: | + Can point to at most 3 xgmac interrupts. The 1st one is the main + interrupt, the 2nd one is used for power management. The optional + 3rd one is the low power state interrupt. + minItems: 2 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; + }; diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 770af7c46114..e42ea28d6ab4 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -4,11 +4,14 @@ $id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 CAN Controller Device Tree Bindings +title: Allwinner A10 CAN Controller maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: can-controller.yaml# properties: compatible: @@ -17,6 +20,8 @@ properties: - const: allwinner,sun7i-a20-can - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can + - const: allwinner,sun8i-r40-can + - const: allwinner,sun20i-d1-can reg: maxItems: 1 @@ -27,6 +32,20 @@ properties: clocks: maxItems: 1 + resets: + maxItems: 1 + +if: + properties: + compatible: + enum: + - allwinner,sun8i-r40-can + - allwinner,sun20i-d1-can + +then: + required: + - resets + required: - compatible - reg @@ -47,5 +66,15 @@ examples: interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_CAN>; }; + - | + #define RST_BUS_CAN 68 + #define CLK_BUS_CAN 91 + can1: can@1c2bc00 { + compatible = "allwinner,sun8i-r40-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CAN>; + resets = <&ccu RST_BUS_CAN>; + }; ... diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt index 14e52a0d86ec..218a3b3eb27e 100644 --- a/Documentation/devicetree/bindings/net/can/atmel-can.txt +++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt @@ -1,7 +1,8 @@ * AT91 CAN * Required properties: - - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can" + - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or + "microchip,sam9x60-can" - reg: Should contain CAN controller registers location and length - interrupts: Should contain IRQ line for the CAN controller diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml new file mode 100644 index 000000000000..4d7d67ee175a --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch C_CAN/D_CAN controller + +description: Bosch C_CAN/D_CAN controller for CAN bus + +maintainers: + - Dario Binacchi <dariobin@libero.it> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - bosch,c_can + - bosch,d_can + - ti,dra7-d_can + - ti,am3352-d_can + - items: + - enum: + - ti,am4372-d_can + - const: ti,am3352-d_can + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + + power-domains: + description: | + Should contain a phandle to a PM domain provider node and an args + specifier containing the DCAN device id value. It's mandatory for + Keystone 2 66AK2G SoCs only. + maxItems: 1 + + clocks: + description: | + CAN functional clock phandle. + maxItems: 1 + + clock-names: + maxItems: 1 + + syscon-raminit: + description: | + Handle to system control region that contains the RAMINIT register, + register offset to the RAMINIT register and the CAN instance number (0 + offset). + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number. + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +if: + properties: + compatible: + contains: + enum: + - bosch,d_can + +then: + properties: + interrupts: + items: + - description: Error and status IRQ + - description: Message object IRQ + - description: RAM ECC correctable error IRQ + - description: RAM ECC non-correctable error IRQ + +else: + properties: + interrupts: + items: + - description: Error and status IRQ + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/altr,rst-mgr.h> + + can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; + }; + - | + can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + }; diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml new file mode 100644 index 000000000000..f9ffb963d6b1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch MCAN controller + +description: Bosch MCAN controller for CAN bus + +maintainers: + - Chandrasekar Ramakrishnan <rcsekar@samsung.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + const: bosch,m_can + + reg: + items: + - description: M_CAN registers map + - description: message RAM + + reg-names: + items: + - const: m_can + - const: message_ram + + interrupts: + items: + - description: interrupt line0 + - description: interrupt line1 + minItems: 1 + + interrupt-names: + items: + - const: int0 + - const: int1 + minItems: 1 + + clocks: + items: + - description: peripheral clock + - description: bus clock + + clock-names: + items: + - const: hclk + - const: cclk + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + $ref: /schemas/types.yaml#/definitions/int32-array + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + minItems: 1 + + power-domains: + description: + Power domain provider node and an args specifier containing + the can device id value. + maxItems: 1 + + can-transceiver: + $ref: can-transceiver.yaml# + + phys: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - bosch,mram-cfg + +unevaluatedProperties: false + +examples: + - | + // Example with interrupts + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <0 114 0x04>, <0 114 0x04>; + interrupt-names = "int0", "int1"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + + - | + // Example with timer polling + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt deleted file mode 100644 index 2d504256b0d8..000000000000 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ /dev/null @@ -1,65 +0,0 @@ -Bosch C_CAN/D_CAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,c_can" for C_CAN controllers and - "bosch,d_can" for D_CAN controllers. - Can be "ti,dra7-d_can", "ti,am3352-d_can" or - "ti,am4372-d_can". -- reg : physical base address and size of the C_CAN/D_CAN - registers map -- interrupts : property with a value describing the interrupt - number - -The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: -- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the - instance number - -The following are mandatory properties for Keystone 2 66AK2G SoCs only: -- power-domains : Should contain a phandle to a PM domain provider node - and an args specifier containing the DCAN device id - value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt -- clocks : CAN functional clock phandle. This property is as per the - binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt - -Optional properties: -- syscon-raminit : Handle to system control region that contains the - RAMINIT register, register offset to the RAMINIT - register and the CAN instance number (0 offset). - -Note: "ti,hwmods" field is used to fetch the base address and irq -resources from TI, omap hwmod data base during device registration. -Future plan is to migrate hwmod data base contents into device tree -blob so that, all the required data will be used from device tree dts -file. - -Example: - -Step1: SoC common .dtsi file - - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; - reg = <0x481d0000 0x2000>; - interrupts = <55>; - interrupt-parent = <&intc>; - status = "disabled"; - }; - -(or) - - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; - ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; - interrupts = <55>; - interrupt-parent = <&intc>; - status = "disabled"; - }; - -Step 2: board specific .dts file - - &dcan1 { - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml new file mode 100644 index 000000000000..217be90960e8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/can-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAN Controller Common Properties + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +properties: + $nodename: + pattern: "^can(@.*)?$" + + termination-gpios: + description: GPIO pin to enable CAN bus termination. + maxItems: 1 + + termination-ohms: + description: The resistance value of the CAN bus termination resistor. + minimum: 1 + maximum: 65535 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt deleted file mode 100644 index 0011f53ff159..000000000000 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt +++ /dev/null @@ -1,24 +0,0 @@ -Generic CAN transceiver Device Tree binding ------------------------------- - -CAN transceiver typically limits the max speed in standard CAN and CAN FD -modes. Typically these limitations are static and the transceivers themselves -provide no way to detect this limitation at runtime. For this situation, -the "can-transceiver" node can be used. - -Required Properties: - max-bitrate: a positive non 0 value that determines the max - speed that CAN/CAN-FD can run. Any other value - will be ignored. - -Examples: - -Based on Texas Instrument's TCAN1042HGV CAN Transceiver - -m_can0 { - .... - can-transceiver { - max-bitrate = <5000000>; - }; - ... -}; diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml new file mode 100644 index 000000000000..d422b3921ffa --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAN transceiver + +description: CAN transceiver generic properties bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + max-bitrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. + minimum: 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt index 77027bf6460a..042200cf4419 100644 --- a/Documentation/devicetree/bindings/net/can/cc770.txt +++ b/Documentation/devicetree/bindings/net/can/cc770.txt @@ -26,7 +26,7 @@ Optional properties: will be disabled. - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified, - a resonable value will be calculated. + a reasonable value will be calculated. - bosch,disconnect-rx0-input : see data sheet. diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml new file mode 100644 index 000000000000..a009a4402938 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CTU CAN FD Open-source IP Core + +description: | + Open-source CAN FD IP core developed at the Czech Technical University in Prague + + The core sources and documentation on project page + [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf + + Integration in Xilinx Zynq SoC based system together with + OpenCores SJA1000 compatible controllers + [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + Martin Jerabek dimploma thesis with integration and testing + framework description + [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +maintainers: + - Pavel Pisa <pisa@cmp.felk.cvut.cz> + - Ondrej Ille <ondrej.ille@gmail.com> + - Martin Jerabek <martin.jerabek01@gmail.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ctu,ctucanfd-2 + - const: ctu,ctucanfd + - const: ctu,ctucanfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: | + phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml new file mode 100644 index 000000000000..4162469c3c08 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - fsl,imx93-flexcan + - fsl,imx8qm-flexcan + - fsl,imx8mp-flexcan + - fsl,imx6q-flexcan + - fsl,imx28-flexcan + - fsl,imx25-flexcan + - fsl,p1010-flexcan + - fsl,vf610-flexcan + - fsl,ls1021ar2-flexcan + - fsl,lx2160ar1-flexcan + - items: + - enum: + - fsl,imx53-flexcan + - fsl,imx35-flexcan + - const: fsl,imx25-flexcan + - items: + - enum: + - fsl,imx7d-flexcan + - fsl,imx6ul-flexcan + - fsl,imx6sx-flexcan + - const: fsl,imx6q-flexcan + - items: + - enum: + - fsl,ls1028ar1-flexcan + - const: fsl,lx2160ar1-flexcan + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + + clock-frequency: + description: | + The oscillator frequency driving the flexcan device, filled in by the + boot loader. This property should only be used the used operating system + doesn't support the clocks and clock-names property. + + power-domains: + maxItems: 1 + + xceiver-supply: + description: Regulator that powers the CAN transceiver. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This means the registers of FlexCAN controller are big endian. This is + optional property.i.e. if this property is not present in device tree + node then controller is assumed to be little endian. If this property is + present then controller is assumed to be big endian. + + fsl,stop-mode: + description: | + Register bits of stop mode control. + + The format should be as follows: + <gpr req_gpr req_bit> + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of CAN stop request. + req_bit is the bit offset of CAN stop request. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f + + fsl,clk-source: + description: | + Select the clock source to the CAN Protocol Engine (PE). It's SoC + implementation dependent. Refer to RM for detailed definition. If this + property is not set in device tree node then driver selects clock source 1 + by default. + 0: clock source 0 (oscillator clock) + 1: clock source 1 (peripheral clock) + $ref: /schemas/types.yaml#/definitions/uint8 + default: 1 + minimum: 0 + maximum: 1 + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable CAN remote wakeup. + + fsl,scu-index: + description: | + The scu index of CAN instance. + For SoCs with SCU support, need setup stop mode via SCU firmware, so this + property can help indicate a resource. It supports up to 3 CAN instances + now. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 2 + + termination-gpios: true + termination-ohms: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <200000000>; + fsl,clk-source = /bits/ 8 <0>; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + can@2090000 { + compatible = "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 1>, <&clks 2>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28>; + fsl,scu-index = /bits/ 8 <1>; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + can@2090000 { + compatible = "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 1>, <&clks 2>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28>; + termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + termination-ohms = <120>; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt deleted file mode 100644 index 94c0f8bf4deb..000000000000 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ /dev/null @@ -1,53 +0,0 @@ -Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). - -Required properties: - -- compatible : Should be "fsl,<processor>-flexcan" - - An implementation should also claim any of the following compatibles - that it is fully backwards compatible with: - - - fsl,p1010-flexcan - -- reg : Offset and length of the register set for this device -- interrupts : Interrupt tuple for this device - -Optional properties: - -- clock-frequency : The oscillator frequency driving the flexcan device - -- xceiver-supply: Regulator that powers the CAN transceiver - -- big-endian: This means the registers of FlexCAN controller are big endian. - This is optional property.i.e. if this property is not present in - device tree node then controller is assumed to be little endian. - if this property is present then controller is assumed to be big - endian. - -- fsl,stop-mode: register bits of stop mode control, the format is - <&gpr req_gpr req_bit ack_gpr ack_bit>. - gpr is the phandle to general purpose register node. - req_gpr is the gpr register offset of CAN stop request. - req_bit is the bit offset of CAN stop request. - ack_gpr is the gpr register offset of CAN stop acknowledge. - ack_bit is the bit offset of CAN stop acknowledge. - -- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE). - It's SoC Implementation dependent. Refer to RM for detailed - definition. If this property is not set in device tree node - then driver selects clock source 1 by default. - 0: clock source 0 (oscillator clock) - 1: clock source 1 (peripheral clock) - -- wakeup-source: enable CAN remote wakeup - -Example: - - can@1c000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1c000 0x1000>; - interrupts = <48 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <200000000>; // filled in by bootloader - fsl,clk-source = <0>; // select clock source 0 for PE - }; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt deleted file mode 100644 index ed614383af9c..000000000000 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ /dev/null @@ -1,75 +0,0 @@ -Bosch MCAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,m_can" for M_CAN controllers -- reg : physical base address and size of the M_CAN - registers map and Message RAM -- reg-names : Should be "m_can" and "message_ram" -- interrupts : Should be the interrupt number of M_CAN interrupt - line 0 and line 1, could be same if sharing - the same interrupt. -- interrupt-names : Should contain "int0" and "int1" -- clocks : Clocks used by controller, should be host clock - and CAN clock. -- clock-names : Should contain "hclk" and "cclk" -- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- bosch,mram-cfg : Message RAM configuration data. - Multiple M_CAN instances can share the same Message - RAM and each element(e.g Rx FIFO or Tx Buffer and etc) - number in Message RAM is also configurable, - so this property is telling driver how the shared or - private Message RAM are used by this M_CAN controller. - - The format should be as follows: - <offset sidf_elems xidf_elems rxf0_elems rxf1_elems - rxb_elems txe_elems txb_elems> - The 'offset' is an address offset of the Message RAM - where the following elements start from. This is - usually set to 0x0 if you're using a private Message - RAM. The remain cells are used to specify how many - elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in - Bosch M_CAN user manual for details. - -Optional Subnode: -- can-transceiver : Can-transceiver subnode describing maximum speed - that can be used for CAN/CAN-FD modes. See - Documentation/devicetree/bindings/net/can/can-transceiver.txt - for details. -Example: -SoC dtsi: -m_can1: can@20e8000 { - compatible = "bosch,m_can"; - reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; - reg-names = "m_can", "message_ram"; - interrupts = <0 114 0x04>, - <0 114 0x04>; - interrupt-names = "int0", "int1"; - clocks = <&clks IMX6SX_CLK_CANFD>, - <&clks IMX6SX_CLK_CANFD>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; -}; - -Board dts: -&m_can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_m_can1>; - status = "enabled"; - - can-transceiver { - max-bitrate = <5000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt index 5a0111d4de58..381f8fb3e865 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt @@ -12,6 +12,9 @@ Required properties: Optional properties: - vdd-supply: Regulator that powers the CAN controller. - xceiver-supply: Regulator that powers the CAN transceiver. + - gpio-controller: Indicates this device is a GPIO controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity. Example: can0: can@1 { @@ -19,7 +22,9 @@ Example: reg = <1>; clocks = <&clk24m>; interrupt-parent = <&gpio4>; - interrupts = <13 0x2>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; + gpio-controller; + #gpio-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml new file mode 100644 index 000000000000..2a98b26630cb --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN controller + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - microchip,mcp2517fd + - microchip,mcp2518fd + - microchip,mcp251xfd + - items: + - enum: + - microchip,mcp251863 + - const: microchip,mcp2518fd + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + vdd-supply: + description: Regulator that powers the CAN controller. + + xceiver-supply: + description: Regulator that powers the CAN transceiver. + + microchip,rx-int-gpios: + description: + GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which + signals a pending RX interrupt. + maxItems: 1 + + spi-max-frequency: + description: + Must be half or less of "clocks" frequency. + maximum: 20000000 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + clocks = <&can0_osc>; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + spi-max-frequency = <20000000>; + interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>; + microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml new file mode 100644 index 000000000000..45aa3de7cf01 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Microchip PolarFire SoC (MPFS) can controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + const: microchip,mpfs-can + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + can@2010c000 { + compatible = "microchip,mpfs-can"; + reg = <0x2010c000 0x1000>; + clocks = <&clkcfg 17>; + interrupt-parent = <&plic>; + interrupts = <56>; + }; diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml new file mode 100644 index 000000000000..144a3785132c --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips) + +maintainers: + - Wolfgang Grandegger <wg@grandegger.com> + +properties: + compatible: + oneOf: + - enum: + - nxp,sja1000 + - technologic,sja1000 + - items: + - enum: + - renesas,r9a06g032-sja1000 # RZ/N1D + - renesas,r9a06g033-sja1000 # RZ/N1S + - const: renesas,rzn1-sja1000 # RZ/N1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg-io-width: + description: I/O register width (in bytes) implemented by this device + default: 1 + enum: [ 1, 2, 4 ] + + nxp,external-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 16000000 + description: | + Frequency of the external oscillator clock in Hz. + The internal clock frequency used by the SJA1000 is half of that value. + + nxp,tx-output-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + default: 1 + description: | + operation mode of the TX output control logic. Valid values are: + <0> : bi-phase output mode + <1> : normal output mode (default) + <2> : test output mode + <3> : clock output mode + + nxp,tx-output-config: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x02 + description: | + TX output pin configuration. Valid values are any one of the below + or combination of TX0 and TX1: + <0x01> : TX0 invert + <0x02> : TX0 pull-down (default) + <0x04> : TX0 pull-up + <0x06> : TX0 push-pull + <0x08> : TX1 invert + <0x10> : TX1 pull-down + <0x20> : TX1 pull-up + <0x30> : TX1 push-pull + + nxp,clock-out-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + clock frequency in Hz on the CLKOUT pin. + If not specified or if the specified value is 0, the CLKOUT pin + will be disabled. + + nxp,no-comparator-bypass: + type: boolean + description: Allows to disable the CAN input comparator. + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: can-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - technologic,sja1000 + - renesas,rzn1-sja1000 + then: + required: + - reg-io-width + - if: + properties: + compatible: + contains: + const: renesas,rzn1-sja1000 + then: + required: + - clocks + - power-domains + +unevaluatedProperties: false + +examples: + - | + can@1a000 { + compatible = "technologic,sja1000"; + reg = <0x1a000 0x100>; + interrupts = <1>; + reg-io-width = <2>; + nxp,tx-output-config = <0x06>; + nxp,external-clock-frequency = <24000000>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + can@52104000 { + compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; + reg = <0x52104000 0x800>; + reg-io-width = <4>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl R9A06G032_HCLK_CAN0>; + power-domains = <&sysctrl>; + }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt deleted file mode 100644 index 19e4a7d91511..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ /dev/null @@ -1,76 +0,0 @@ -Renesas R-Car CAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. - "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. - "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. - "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. - "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. - "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. - "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. - "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. - "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. - "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC. - "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC. - "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. - "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. - "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. - "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. - "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. - "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. - "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC. - "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. - "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 - compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 - compatible device. - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: physical base address and size of the R-Car CAN register map. -- interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, -R8A77990, and R8A77995: -For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can -be used by both CAN and CAN FD controller at the same time. It needs to be -scaled to maximum frequency if any of these controllers use it. This is done -using the below properties: - -- assigned-clocks: phandle of clkp2(CANFD) clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional properties: -- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: - <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : External input clock - -Example -------- - -SoC common .dtsi file: - - can0: can@e6e80000 { - compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - status = "disabled"; - }; - -Board specific .dts file: - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt deleted file mode 100644 index a901cd9be29e..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ /dev/null @@ -1,105 +0,0 @@ -Renesas R-Car CAN FD controller Device Tree Bindings ----------------------------------------------------- - -Required properties: -- compatible: Must contain one or more of the following: - - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. - - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. - - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. - - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller. - - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. - - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. - - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller. - - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - -- reg: physical base address and size of the R-Car CAN FD register map. -- interrupts: interrupt specifiers for the Channel & Global interrupts -- clocks: phandles and clock specifiers for 3 clock inputs. -- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required child nodes: -The controller supports two channels and each is represented as a child node. -The name of the child nodes are "channel0" and "channel1" respectively. Each -child node supports the "status" property only, which is used to -enable/disable the respective channel. - -Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, -R8A77990, and R8A77995: -In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN -and CAN FD controller at the same time. It needs to be scaled to maximum -frequency if any of these controllers use it. This is done using the below -properties: - -- assigned-clocks: phandle of canfd clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional property: -The controller can operate in either CAN FD only mode (default) or -Classical CAN only mode. The mode is global to both the channels. In order to -enable the later, define the following optional property. - - renesas,no-can-fd: puts the controller in Classical CAN only mode. - -Example -------- - -SoC common .dtsi file: - - canfd: can@e66c0000 { - compatible = "renesas,r8a7795-canfd", - "renesas,rcar-gen3-canfd"; - reg = <0 0xe66c0000 0 0x8000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 914>, - <&cpg CPG_CORE R8A7795_CLK_CANFD>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; - assigned-clock-rates = <40000000>; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - - channel1 { - status = "disabled"; - }; - }; - -Board specific .dts file: - -E.g. below enables Channel 1 alone in the board in Classical CAN only mode. - -&canfd { - pinctrl-0 = <&canfd1_pins>; - pinctrl-names = "default"; - renesas,no-can-fd; - status = "okay"; - - channel1 { - status = "okay"; - }; -}; - -E.g. below enables Channel 0 alone in the board using External clock -as fCAN clock. - -&canfd { - pinctrl-0 = <&canfd0_pins &can_clk_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml new file mode 100644 index 000000000000..fadc871fd6b0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN Controller + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,can-r8a7778 # R-Car M1-A + - renesas,can-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-can # R-Car Gen1 + + - items: + - enum: + - renesas,can-r8a7742 # RZ/G1H + - renesas,can-r8a7743 # RZ/G1M + - renesas,can-r8a7744 # RZ/G1N + - renesas,can-r8a7745 # RZ/G1E + - renesas,can-r8a77470 # RZ/G1C + - renesas,can-r8a7790 # R-Car H2 + - renesas,can-r8a7791 # R-Car M2-W + - renesas,can-r8a7792 # R-Car V2H + - renesas,can-r8a7793 # R-Car M2-N + - renesas,can-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,can-r8a774a1 # RZ/G2M + - renesas,can-r8a774b1 # RZ/G2N + - renesas,can-r8a774c0 # RZ/G2E + - renesas,can-r8a774e1 # RZ/G2H + - renesas,can-r8a7795 # R-Car H3 + - renesas,can-r8a7796 # R-Car M3-W + - renesas,can-r8a77961 # R-Car M3-W+ + - renesas,can-r8a77965 # R-Car M3-N + - renesas,can-r8a77990 # R-Car E3 + - renesas,can-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: clkp1 + - const: clkp2 + - const: can_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,can-clock-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 3 ] + default: 0 + description: | + R-Car CAN Clock Source Select. Valid values are: + <0x0> (default) : Peripheral clock (clkp1) + <0x1> : Peripheral clock (clkp2) + <0x3> : External input clock + + assigned-clocks: + description: + Reference to the clkp2 (CANFD) clock. + On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock. This is a div6 + clock and can be used by both CAN and CAN FD controllers at the same + time. It needs to be scaled to maximum frequency if any of these + controllers use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +allOf: + - $ref: can-controller.yaml# + + - if: + not: + properties: + compatible: + contains: + const: renesas,rcar-gen1-can + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: renesas,rcar-gen3-can + then: + required: + - assigned-clocks + - assigned-clock-rates + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; + reg = <0xe6e80000 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml new file mode 100644 index 000000000000..d3f45d29fa0a --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN FD Controller + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a774a1-canfd # RZ/G2M + - renesas,r8a774b1-canfd # RZ/G2N + - renesas,r8a774c0-canfd # RZ/G2E + - renesas,r8a774e1-canfd # RZ/G2H + - renesas,r8a7795-canfd # R-Car H3 + - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77961-canfd # R-Car M3-W+ + - renesas,r8a77965-canfd # R-Car M3-N + - renesas,r8a77970-canfd # R-Car V3M + - renesas,r8a77980-canfd # R-Car V3H + - renesas,r8a77990-canfd # R-Car E3 + - renesas,r8a77995-canfd # R-Car D3 + - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2 + + - items: + - enum: + - renesas,r8a779a0-canfd # R-Car V3U + - renesas,r8a779g0-canfd # R-Car V4H + - const: renesas,rcar-gen4-canfd # R-Car Gen4 + + - items: + - enum: + - renesas,r9a07g043-canfd # RZ/G2UL and RZ/Five + - renesas,r9a07g044-canfd # RZ/G2{L,LC} + - renesas,r9a07g054-canfd # RZ/V2L + - const: renesas,rzg2l-canfd # RZ/G2L family + + reg: + maxItems: 1 + + interrupts: true + + clocks: + maxItems: 3 + + clock-names: + items: + - const: fck + - const: canfd + - const: can_clk + + power-domains: + maxItems: 1 + + resets: true + + renesas,no-can-fd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The controller can operate in either CAN FD only mode (default) or + Classical CAN only mode. The mode is global to all channels. + Specify this property to put the controller in Classical CAN only mode. + + assigned-clocks: + description: + Reference to the CANFD clock. The CANFD clock is a div6 clock and can be + used by both CAN (if present) and CAN FD controllers at the same time. + It needs to be scaled to maximum frequency if any of these controllers + use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +patternProperties: + "^channel[0-7]$": + type: object + description: + The controller supports multiple channels and each is represented as a + child node. Each channel can be enabled/disabled individually. + + properties: + phys: + maxItems: 1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - resets + - assigned-clocks + - assigned-clock-rates + - channel0 + - channel1 + +allOf: + - $ref: can-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,rzg2l-canfd + then: + properties: + interrupts: + items: + - description: CAN global error interrupt + - description: CAN receive FIFO interrupt + - description: CAN0 error interrupt + - description: CAN0 transmit interrupt + - description: CAN0 transmit/receive FIFO receive completion interrupt + - description: CAN1 error interrupt + - description: CAN1 transmit interrupt + - description: CAN1 transmit/receive FIFO receive completion interrupt + + interrupt-names: + items: + - const: g_err + - const: g_recc + - const: ch0_err + - const: ch0_rec + - const: ch0_trx + - const: ch1_err + - const: ch1_rec + - const: ch1_trx + + resets: + maxItems: 2 + + reset-names: + items: + - const: rstp_n + - const: rstc_n + + required: + - reset-names + else: + properties: + interrupts: + items: + - description: Channel interrupt + - description: Global interrupt + + interrupt-names: + items: + - const: ch_int + - const: g_int + + resets: + maxItems: 1 + + - if: + not: + properties: + compatible: + contains: + const: renesas,rcar-gen4-canfd + then: + patternProperties: + "^channel[2-7]$": false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + canfd: can@e66c0000 { + compatible = "renesas,r8a7795-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0xe66c0000 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; + + channel0 { + }; + + channel1 { + }; + }; diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt deleted file mode 100644 index ac3160eca96a..000000000000 --- a/Documentation/devicetree/bindings/net/can/sja1000.txt +++ /dev/null @@ -1,58 +0,0 @@ -Memory mapped SJA1000 CAN controller from NXP (formerly Philips) - -Required properties: - -- compatible : should be one of "nxp,sja1000", "technologic,sja1000". - -- reg : should specify the chip select, address offset and size required - to map the registers of the SJA1000. The size is usually 0x80. - -- interrupts: property with a value describing the interrupt source - (number and sensitivity) required for the SJA1000. - -Optional properties: - -- reg-io-width : Specify the size (in bytes) of the IO accesses that - should be performed on the device. Valid value is 1, 2 or 4. - This property is ignored for technologic version. - Default to 1 (8 bits). - -- nxp,external-clock-frequency : Frequency of the external oscillator - clock in Hz. Note that the internal clock frequency used by the - SJA1000 is half of that value. If not specified, a default value - of 16000000 (16 MHz) is used. - -- nxp,tx-output-mode : operation mode of the TX output control logic: - <0x0> : bi-phase output mode - <0x1> : normal output mode (default) - <0x2> : test output mode - <0x3> : clock output mode - -- nxp,tx-output-config : TX output pin configuration: - <0x01> : TX0 invert - <0x02> : TX0 pull-down (default) - <0x04> : TX0 pull-up - <0x06> : TX0 push-pull - <0x08> : TX1 invert - <0x10> : TX1 pull-down - <0x20> : TX1 pull-up - <0x30> : TX1 push-pull - -- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin. - If not specified or if the specified value is 0, the CLKOUT pin - will be disabled. - -- nxp,no-comparator-bypass : Allows to disable the CAN input comparator. - -For further information, please have a look to the SJA1000 data sheet. - -Examples: - -can@3,100 { - compatible = "nxp,sja1000"; - reg = <3 0x100 0x80>; - interrupts = <2 0>; - interrupt-parent = <&mpic>; - nxp,external-clock-frequency = <16000000>; -}; - diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml new file mode 100644 index 000000000000..de1d4298893b --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics bxCAN controller + +description: STMicroelectronics BxCAN controller for CAN bus + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + enum: + - st,stm32f4-bxcan + + st,can-primary: + description: + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. + type: boolean + + reg: + maxItems: 1 + + interrupts: + items: + - description: transmit interrupt + - description: FIFO 0 receive interrupt + - description: FIFO 1 receive interrupt + - description: status change error interrupt + + interrupt-names: + items: + - const: tx + - const: rx0 + - const: rx1 + - const: sce + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + st,gcan: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + The phandle to the gcan node which allows to access the 512-bytes + SRAM memory shared by the two bxCAN cells (CAN1 primary and CAN2 + secondary) in dual CAN peripheral configuration. + +required: + - compatible + - reg + - interrupts + - resets + - clocks + - st,gcan + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32fx-clock.h> + #include <dt-bindings/mfd/stm32f4-rcc.h> + + can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F4_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan>; + }; diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 27e1b4cebfbd..170e23f0610d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -4,25 +4,30 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. -See Documentation/devicetree/bindings/net/can/m_can.txt for additional +See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional required property details. Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. Example: tcan4x5x: tcan4x5x@0 { @@ -31,10 +36,10 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; - interrupts = <14 GPIO_ACTIVE_LOW>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml new file mode 100644 index 000000000000..64d57c343e6f --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Xilinx Axi CAN/Zynq CANPS controller + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> + +properties: + compatible: + enum: + - xlnx,zynq-can-1.0 + - xlnx,axi-can-1.00.a + - xlnx,canfd-1.0 + - xlnx,canfd-2.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + maxItems: 2 + + power-domains: + maxItems: 1 + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CAN Tx fifo depth (Zynq, Axi CAN). + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode) + + tx-mailbox-count: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CAN Tx mailbox buffer count (CAN FD) + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +allOf: + - $ref: can-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynq-can-1.0 + + then: + properties: + clock-names: + items: + - const: can_clk + - const: pclk + required: + - tx-fifo-depth + - rx-fifo-depth + + - if: + properties: + compatible: + contains: + enum: + - xlnx,axi-can-1.00.a + + then: + properties: + clock-names: + items: + - const: can_clk + - const: s_axi_aclk + required: + - tx-fifo-depth + - rx-fifo-depth + + - if: + properties: + compatible: + contains: + enum: + - xlnx,canfd-1.0 + - xlnx,canfd-2.0 + + then: + properties: + clock-names: + items: + - const: can_clk + - const: s_axi_aclk + required: + - tx-mailbox-count + - rx-fifo-depth + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + reg = <0xe0008000 0x1000>; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + - | + can@40000000 { + compatible = "xlnx,axi-can-1.00.a"; + reg = <0x40000000 0x10000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + - | + can@40000000 { + compatible = "xlnx,canfd-1.0"; + reg = <0x40000000 0x2000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-mailbox-count = <0x20>; + rx-fifo-depth = <0x20>; + }; + + - | + can@ff060000 { + compatible = "xlnx,canfd-2.0"; + reg = <0xff060000 0x6000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-mailbox-count = <0x20>; + rx-fifo-depth = <0x40>; + }; diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt deleted file mode 100644 index 100cc40b8510..000000000000 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ /dev/null @@ -1,61 +0,0 @@ -Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Should be: - - "xlnx,zynq-can-1.0" for Zynq CAN controllers - - "xlnx,axi-can-1.00.a" for Axi CAN controllers - - "xlnx,canfd-1.0" for CAN FD controllers - - "xlnx,canfd-2.0" for CAN FD 2.0 controllers -- reg : Physical base address and size of the controller - registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - - "can_clk", "pclk" (For CANPS), - - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD). - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). -- tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN). -- rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in - sequential Rx mode). -- tx-mailbox-count : Can Tx mailbox buffer count (CAN FD). -- rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx - mode). - - -Example: - -For Zynq CANPS Dts file: - zynq_can_0: can@e0008000 { - compatible = "xlnx,zynq-can-1.0"; - clocks = <&clkc 19>, <&clkc 36>; - clock-names = "can_clk", "pclk"; - reg = <0xe0008000 0x1000>; - interrupts = <0 28 4>; - interrupt-parent = <&intc>; - tx-fifo-depth = <0x40>; - rx-fifo-depth = <0x40>; - }; -For Axi CAN Dts file: - axi_can_0: axi-can@40000000 { - compatible = "xlnx,axi-can-1.00.a"; - clocks = <&clkc 0>, <&clkc 1>; - clock-names = "can_clk","s_axi_aclk" ; - reg = <0x40000000 0x10000>; - interrupt-parent = <&intc>; - interrupts = <0 59 1>; - tx-fifo-depth = <0x40>; - rx-fifo-depth = <0x40>; - }; -For CAN FD Dts file: - canfd_0: canfd@40000000 { - compatible = "xlnx,canfd-1.0"; - clocks = <&clkc 0>, <&clkc 1>; - clock-names = "can_clk", "s_axi_aclk"; - reg = <0x40000000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <0 59 1>; - tx-mailbox-count = <0x20>; - rx-fifo-depth = <0x20>; - }; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml new file mode 100644 index 000000000000..bf8894a0257e --- /dev/null +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cdns,macb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MACB/GEM Ethernet controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Claudiu Beznea <claudiu.beznea@microchip.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - cdns,at91rm9200-emac # Atmel at91rm9200 SoC + - const: cdns,emac # Generic + + - items: + - enum: + - cdns,zynq-gem # Xilinx Zynq-7xxx SoC + - cdns,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC + - const: cdns,gem # Generic + deprecated: true + + - items: + - enum: + - xlnx,versal-gem # Xilinx Versal + - xlnx,zynq-gem # Xilinx Zynq-7xxx SoC + - xlnx,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC + - const: cdns,gem # Generic + + - items: + - enum: + - cdns,at91sam9260-macb # Atmel at91sam9 SoCs + - cdns,sam9x60-macb # Microchip sam9x60 SoC + - microchip,mpfs-macb # Microchip PolarFire SoC + - const: cdns,macb # Generic + + - items: + - enum: + - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs + - enum: + - cdns,at91sam9260-macb # Atmel at91sam9 SoCs. + - const: cdns,macb # Generic + + - enum: + - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs + - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs + - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs + - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs + - cdns,np4-macb # NP4 SoC devices + - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface + - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + - sifive,fu540-c000-gem # SiFive FU540-C000 SoC + - cdns,emac # Generic + - cdns,gem # Generic + - cdns,macb # Generic + + reg: + minItems: 1 + items: + - description: Basic register set + - description: GEMGXL Management block registers on SiFive FU540-C000 SoC + + interrupts: + minItems: 1 + maxItems: 8 + description: One interrupt per available hardware queue + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + items: + - enum: [ ether_clk, hclk, pclk ] + - enum: [ hclk, pclk ] + - const: tx_clk + - enum: [ rx_clk, tsu_clk ] + - const: tsu_clk + + local-mac-address: true + + phy-mode: true + + phy-handle: true + + phys: + maxItems: 1 + + resets: + maxItems: 1 + description: + Recommended with ZynqMP, specify reset control for this + controller instance with zynqmp-reset driver. + + reset-names: + maxItems: 1 + + fixed-link: true + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + cdns,rx-watermark: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the receive partial store and forward mode is activated, + the receiver will only begin to forward the packet to the external + AHB or AXI slave when enough packet data is stored in the SRAM packet buffer. + rx-watermark corresponds to the number of SRAM buffer locations, + that need to be filled, before the forwarding process is activated. + Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + mdio: + type: object + description: + Node containing PHY children. If this node is not present, then PHYs will + be direct children. + +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + + properties: + reset-gpios: true + + magic-packet: + type: boolean + description: + Indicates that the hardware supports waking up via magic packet. + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phy-mode + +allOf: + - $ref: ethernet-controller.yaml# + + - if: + not: + properties: + compatible: + contains: + const: sifive,fu540-c000-gem + then: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + macb0: ethernet@fffc4000 { + compatible = "cdns,macb"; + reg = <0xfffc4000 0x4000>; + interrupts = <21>; + cdns,rx-watermark = <0x44>; + phy-mode = "rmii"; + local-mac-address = [3a 0e 03 04 05 06]; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + reset-gpios = <&pioE 6 1>; + }; + }; + + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + #include <dt-bindings/phy/phy.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + gem1: ethernet@ff0c0000 { + compatible = "xlnx,zynqmp-gem", "cdns,gem"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x0 0x1000>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; + #address-cells = <1>; + #size-cells = <0>; + iommus = <&smmu 0x875>; + power-domains = <&zynqmp_firmware PD_ETH_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; + reset-names = "gem1_rst"; + phy-mode = "sgmii"; + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt deleted file mode 100644 index 6c559981d110..000000000000 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt +++ /dev/null @@ -1,92 +0,0 @@ -Cortina Systems Gemini Ethernet Controller -========================================== - -This ethernet controller is found in the Gemini SoC family: -StorLink SL3512 and SL3516, also known as Cortina Systems -CS3512 and CS3516. - -Required properties: -- compatible: must be "cortina,gemini-ethernet" -- reg: must contain the global registers and the V-bit and A-bit - memory areas, in total three register sets. -- syscon: a phandle to the system controller -- #address-cells: must be specified, must be <1> -- #size-cells: must be specified, must be <1> -- ranges: should be state like this giving a 1:1 address translation - for the subnodes - -The subnodes represents the two ethernet ports in this device. -They are not independent of each other since they share resources -in the parent node, and are thus children. - -Required subnodes: -- port0: contains the resources for ethernet port 0 -- port1: contains the resources for ethernet port 1 - -Required subnode properties: -- compatible: must be "cortina,gemini-ethernet-port" -- reg: must contain two register areas: the DMA/TOE memory and - the GMAC memory area of the port -- interrupts: should contain the interrupt line of the port. - this is nominally a level interrupt active high. -- resets: this must provide an SoC-integrated reset line for - the port. -- clocks: this should contain a handle to the PCLK clock for - clocking the silicon in this port -- clock-names: must be "PCLK" - -Optional subnode properties: -- phy-mode: see ethernet.txt -- phy-handle: see ethernet.txt - -Example: - -mdio-bus { - (...) - phy0: ethernet-phy@1 { - reg = <1>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@3 { - reg = <3>; - device_type = "ethernet-phy"; - }; -}; - - -ethernet@60000000 { - compatible = "cortina,gemini-ethernet"; - reg = <0x60000000 0x4000>, /* Global registers, queue */ - <0x60004000 0x2000>, /* V-bit */ - <0x60006000 0x2000>; /* A-bit */ - syscon = <&syscon>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gmac0: ethernet-port@0 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ - <0x6000a000 0x2000>; /* Port 0 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC0>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - - gmac1: ethernet-port@1 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ - <0x6000e000 0x2000>; /* Port 1 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC1>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml new file mode 100644 index 000000000000..44fd23a5fa2b --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini Ethernet Controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This ethernet controller is found in the Gemini SoC family: + StorLink SL3512 and SL3516, also known as Cortina Systems + CS3512 and CS3516. + +properties: + compatible: + const: cortina,gemini-ethernet + + reg: + minItems: 3 + description: must contain the global registers and the V-bit and A-bit + memory areas, in total three register sets. + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +# The subnodes represents the two ethernet ports in this device. +# They are not independent of each other since they share resources +# in the parent node, and are thus children. +patternProperties: + "^ethernet-port@[0-9]+$": + type: object + unevaluatedProperties: false + description: contains the resources for ethernet port + allOf: + - $ref: ethernet-controller.yaml# + properties: + compatible: + const: cortina,gemini-ethernet-port + + reg: + items: + - description: DMA/TOE memory + - description: GMAC memory area of the port + + interrupts: + maxItems: 1 + description: should contain the interrupt line of the port. + this is nominally a level interrupt active high. + + resets: + maxItems: 1 + description: this must provide an SoC-integrated reset line for the port. + + clocks: + maxItems: 1 + description: this should contain a handle to the PCLK clock for + clocking the silicon in this port + + clock-names: + const: PCLK + + required: + - reg + - compatible + - interrupts + - resets + - clocks + - clock-names + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + + ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 7c7ac5eb0313..ef655f386b2e 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -20,7 +20,7 @@ Required properties: - active_slave : Specifies the slave to use for time stamping, ethtool and SIOCGMIIPHY - cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection - device. See also cpsw-phy-sel.txt for it's binding. + device. See also cpsw-phy-sel.txt for its binding. Note that in legacy cases cpsw-phy-sel may be a child device instead of a phandle (DEPRECATED, use phys property instead). diff --git a/Documentation/devicetree/bindings/net/davicom,dm9000.yaml b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml new file mode 100644 index 000000000000..66a7c6eec767 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Davicom DM9000 Fast Ethernet Controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + const: davicom,dm9000 + + reg: + items: + - description: Address registers + - description: Data registers + + interrupts: + maxItems: 1 + + davicom,no-eeprom: + type: boolean + description: Configuration EEPROM is not available + + davicom,ext-phy: + type: boolean + description: Use external PHY + + reset-gpios: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + - $ref: /schemas/net/ethernet-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@a8000000 { + compatible = "davicom,dm9000"; + reg = <0xa8000000 0x2>, <0xa8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml new file mode 100644 index 000000000000..52e852fef753 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Davicom DM9051 SPI Ethernet Controller + +maintainers: + - Joseph CHANG <josright123@gmail.com> + +description: | + The DM9051 is a fully integrated and cost-effective low pin count single + chip Fast Ethernet controller with a Serial Peripheral Interface (SPI). + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: davicom,dm9051 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 45000000 + + interrupts: + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + +additionalProperties: false + +examples: + # Raspberry Pi platform + - | + /* for Raspberry Pi with pin control stuff for GPIO irq */ + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "davicom,dm9051"; + reg = <0>; /* spi chip select */ + local-mac-address = [00 00 00 00 00 00]; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <31200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt deleted file mode 100644 index 64c159e9cbf7..000000000000 --- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt +++ /dev/null @@ -1,27 +0,0 @@ -Davicom DM9000 Fast Ethernet controller - -Required properties: -- compatible = "davicom,dm9000"; -- reg : physical addresses and sizes of registers, must contain 2 entries: - first entry : address register, - second entry : data register. -- interrupts : interrupt specifier specific to interrupt controller - -Optional properties: -- davicom,no-eeprom : Configuration EEPROM is not available -- davicom,ext-phy : Use external PHY -- reset-gpios : phandle of gpio that will be used to reset chip during probe -- vcc-supply : phandle of regulator that will be used to enable power to chip - -Example: - - ethernet@18000000 { - compatible = "davicom,dm9000"; - reg = <0x18000000 0x2 0x18000004 0x2>; - interrupt-parent = <&gpn>; - interrupts = <7 4>; - local-mac-address = [00 00 de ad be ef]; - davicom,no-eeprom; - reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; - vcc-supply = <ð0_power>; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt new file mode 100644 index 000000000000..f824fdae0da2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt @@ -0,0 +1,147 @@ +Atheros AR9331 built-in switch +============================= + +It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal +MDIO bus. All PHYs are built-in as well. + +Required properties: + + - compatible: should be: "qca,ar9331-switch" + - reg: Address on the MII bus for the switch. + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "switch" + - interrupt-parent: Phandle to the parent interrupt controller + - interrupts: IRQ line for the switch + - interrupt-controller: Indicates the switch is itself an interrupt + controller. This is used for the PHY interrupts. + - #interrupt-cells: must be 1 + - mdio: Container of PHY and devices on the switches MDIO bus. + +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional +required and optional properties. +Examples: + +eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "mii"; + phy-handle = <&phy_port4>; +}; + +eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0x0>; + interrupts = <0>; + }; + + phy_port1: phy@1 { + reg = <0x1>; + interrupts = <0>; + }; + + phy_port2: phy@2 { + reg = <0x2>; + interrupts = <0>; + }; + + phy_port3: phy@3 { + reg = <0x3>; + interrupts = <0>; + }; + + phy_port4: phy@4 { + reg = <0x4>; + interrupts = <0>; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml new file mode 100644 index 000000000000..9565a7402146 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arrow SpeedChips XRS7000 Series Switch + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - George McCollister <george.mccollister@gmail.com> + +description: + The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches + are designed for critical networking applications. They have up to three + RGMII ports and one RMII port and are managed via i2c or mdio. + +properties: + compatible: + oneOf: + - enum: + - arrow,xrs7003e + - arrow,xrs7003f + - arrow,xrs7004e + - arrow,xrs7004f + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + switch@8 { + compatible = "arrow,xrs7004e"; + reg = <0x8>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + ethernet-port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy0>; + phy-mode = "rgmii-id"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy1>; + phy-mode = "rgmii-id"; + }; + ethernet-port@3 { + reg = <3>; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt deleted file mode 100644 index 5201bc15fdd6..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ /dev/null @@ -1,145 +0,0 @@ -Broadcom BCM53xx Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of: "brcm,bcm5325" - "brcm,bcm53115" - "brcm,bcm53125" - "brcm,bcm53128" - "brcm,bcm5365" - "brcm,bcm5395" - "brcm,bcm5389" - "brcm,bcm5397" - "brcm,bcm5398" - - For the BCM11360 SoC, must be: - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string - - For the BCM5310x SoCs with an integrated switch, must be one of: - "brcm,bcm53010-srab" - "brcm,bcm53011-srab" - "brcm,bcm53012-srab" - "brcm,bcm53018-srab" - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string - - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of: - "brcm,bcm11404-srab" - "brcm,bcm11407-srab" - "brcm,bcm11409-srab" - "brcm,bcm58310-srab" - "brcm,bcm58311-srab" - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string - - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of: - "brcm,bcm58522-srab" - "brcm,bcm58523-srab" - "brcm,bcm58525-srab" - "brcm,bcm58622-srab" - "brcm,bcm58623-srab" - "brcm,bcm58625-srab" - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string - - For the BCM63xx/33xx SoCs with an integrated switch, must be one of: - "brcm,bcm3384-switch" - "brcm,bcm6328-switch" - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" - -Required properties for BCM585xx/586xx/88312 SoCs: - - - reg: a total of 3 register base addresses, the first one must be the - Switch Register Access block base, the second is the port 5/4 mux - configuration register and the third one is the SGMII configuration - and status register base address. - - - interrupts: a total of 13 interrupts must be specified, in the following - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, - then the timestamping interrupt and the sleep timer interrupts for ports - 5,7,8. - -Optional properties for BCM585xx/586xx/88312 SoCs: - - - reg-names: a total of 3 names matching the 3 base register address, must - be in the following order: - "srab" - "mux_config" - "sgmii_config" - - - interrupt-names: a total of 13 names matching the 13 interrupts specified - must be in the following order: - "link_state_p0" - "link_state_p1" - "link_state_p2" - "link_state_p3" - "link_state_p4" - "link_state_p5" - "link_state_p7" - "link_state_p8" - "phy" - "ts" - "imp_sleep_timer_p5" - "imp_sleep_timer_p7" - "imp_sleep_timer_p8" - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via MDIO to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - compatible = "brcm,unimac"; - reg = <0x10001000 0x1000>; - - fixed-link { - speed = <1000>; - duplex-full; - }; - }; - - mdio0: mdio@10000000 { - compatible = "brcm,unimac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - switch0: ethernet-switch@30 { - compatible = "brcm,bcm53125"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - port0@0 { - reg = <0>; - label = "lan1"; - }; - - port1@1 { - reg = <1>; - label = "lan2"; - }; - - port5@5 { - reg = <5>; - label = "cable-modem"; - fixed-link { - speed = <1000>; - duplex-full; - }; - phy-mode = "rgmii-txid"; - }; - - port8@8 { - reg = <8>; - label = "cpu"; - fixed-link { - speed = <1000>; - duplex-full; - }; - phy-mode = "rgmii-txid"; - ethernet = <ð0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml new file mode 100644 index 000000000000..4c78c546343f --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -0,0 +1,268 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53xx Ethernet switches + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + Broadcom BCM53xx Ethernet switches + +properties: + compatible: + oneOf: + - const: brcm,bcm5325 + - const: brcm,bcm53115 + - const: brcm,bcm53125 + - const: brcm,bcm53128 + - const: brcm,bcm53134 + - const: brcm,bcm5365 + - const: brcm,bcm5395 + - const: brcm,bcm5389 + - const: brcm,bcm5397 + - const: brcm,bcm5398 + - items: + - const: brcm,bcm11360-srab + - const: brcm,cygnus-srab + - items: + - enum: + - brcm,bcm53010-srab + - brcm,bcm53011-srab + - brcm,bcm53012-srab + - brcm,bcm53018-srab + - brcm,bcm53019-srab + - const: brcm,bcm5301x-srab + - items: + - enum: + - brcm,bcm11404-srab + - brcm,bcm11407-srab + - brcm,bcm11409-srab + - brcm,bcm58310-srab + - brcm,bcm58311-srab + - brcm,bcm58313-srab + - const: brcm,omega-srab + - items: + - enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + - const: brcm,nsp-srab + - items: + - enum: + - brcm,bcm3384-switch + - brcm,bcm6318-switch + - brcm,bcm6328-switch + - brcm,bcm6362-switch + - brcm,bcm6368-switch + - brcm,bcm63268-switch + - const: brcm,bcm63xx-switch + +required: + - compatible + - reg + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm5325 + - brcm,bcm53115 + - brcm,bcm53125 + - brcm,bcm53128 + - brcm,bcm5365 + - brcm,bcm5395 + - brcm,bcm5397 + - brcm,bcm5398 + then: + $ref: /schemas/spi/spi-peripheral-props.yaml + + # BCM585xx/586xx/88312 SoCs + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts + else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "cable-modem"; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + phy-mode = "rgmii-txid"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + axi { + #address-cells = <1>; + #size-cells = <1>; + + switch@36000 { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml new file mode 100644 index 000000000000..f21bdd0f408d --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Starfighter 2 integrated switch + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm4908-switch + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + - brcm,bcm7445-switch-v4.0 + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: core + - const: reg + - const: intrl2_0 + - const: intrl2_1 + - const: fcb + - const: acb + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: switch_0 + - const: switch_1 + + resets: + maxItems: 1 + + reset-names: + const: switch + + clocks: + minItems: 1 + items: + - description: switch's main clock + - description: dividing of the switch core clock + + clock-names: + minItems: 1 + items: + - const: sw_switch + - const: sw_switch_mdiv + + brcm,num-gphy: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of integrated gigabit PHYs in the switch + + brcm,num-rgmii-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of RGMII interfaces supported by the switch + + brcm,fcb-pause-override: + description: if present indicates that the switch supports Failover Control + Block pause override capability + type: boolean + + brcm,acb-packets-inflight: + description: if present indicates that the switch Admission Control Block + supports reporting the number of packets in-flight in a switch queue + type: boolean + + ports: + type: object + additionalProperties: true + + patternProperties: + '^port@[0-9a-f]$': + $ref: dsa-port.yaml# + unevaluatedProperties: false + + properties: + brcm,use-bcm-hdr: + description: if present, indicates that the switch port has Broadcom + tags enabled (per-packet metadata) + type: boolean + +required: + - reg + - interrupts + +allOf: + - $ref: dsa.yaml# + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + minItems: 1 + maxItems: 1 + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + const: brcm,bcm7445-switch-v4.0 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + required: + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + switch@f0b00000 { + compatible = "brcm,bcm7445-switch-v4.0"; + reg = <0xf0b00000 0x40000>, + <0xf0b40000 0x110>, + <0xf0b40340 0x30>, + <0xf0b40380 0x30>, + <0xf0b40400 0x34>, + <0xf0b40600 0x208>; + reg-names = "core", "reg", "intrl2_0", "intrl2_1", + "fcb", "acb"; + interrupts = <0 0x18 0>, + <0 0x19 0>; + clocks = <&sw_switch>, <&sw_switch_mdiv>; + clock-names = "sw_switch", "sw_switch_mdiv"; + brcm,num-gphy = <1>; + brcm,num-rgmii-ports = <2>; + brcm,fcb-pause-override; + brcm,acb-packets-inflight; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "gphy"; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml new file mode 100644 index 000000000000..480120469953 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic DSA Switch Port + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vladimir Oltean <olteanv@gmail.com> + +description: + A DSA switch port is a component of a switch that manages one MAC, and can + pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have + DSA-specific functionality. + +$ref: /schemas/net/ethernet-switch-port.yaml# + +properties: + reg: + items: + - description: Port number + + label: + description: + Describes the label associated with this port, which will become + the netdev name + $ref: /schemas/types.yaml#/definitions/string + + link: + description: + Should be a list of phandles to other switch's DSA port. This + port is used as the outgoing port towards the phandle ports. The + full routing information must be given, not just the one hop + routes to neighbouring switches + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + ethernet: + description: + Should be a phandle to a valid Ethernet device node. This host + device is what the switch port is connected to + $ref: /schemas/types.yaml#/definitions/phandle + + dsa-tag-protocol: + description: + Instead of the default, the switch will use this tag protocol if + possible. Useful when a device supports multiple protocols and + the default is incompatible with the Ethernet device. + enum: + - dsa + - edsa + - ocelot + - ocelot-8021q + - rtl8_4 + - rtl8_4t + - seville + +# CPU and DSA ports must have phylink-compatible link descriptions +if: + oneOf: + - required: [ ethernet ] + - required: [ link ] +then: + allOf: + - required: + - phy-mode + - oneOf: + - required: + - fixed-link + - required: + - phy-handle + - required: + - managed + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index f66bb7ecdb82..dab208b5c7c7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -1,257 +1,4 @@ Distributed Switch Architecture Device Tree Bindings ---------------------------------------------------- -Switches are true Linux devices and can be probed by any means. Once -probed, they register to the DSA framework, passing a node -pointer. This node is expected to fulfil the following binding, and -may contain additional properties as required by the device it is -embedded within. - -Required properties: - -- ports : A container for child nodes representing switch ports. - -Optional properties: - -- dsa,member : A two element list indicates which DSA cluster, and position - within the cluster a switch takes. <0 0> is cluster 0, - switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1, - switch 0. A switch not part of any cluster (single device - hanging off a CPU port) must not specify this property - -The ports container has the following properties - -Required properties: - -- #address-cells : Must be 1 -- #size-cells : Must be 0 - -Each port children node must have the following mandatory properties: -- reg : Describes the port address in the switch - -An uplink/downlink port between switches in the cluster has the following -mandatory property: - -- link : Should be a list of phandles to other switch's DSA - port. This port is used as the outgoing port - towards the phandle ports. The full routing - information must be given, not just the one hop - routes to neighbouring switches. - -A CPU port has the following mandatory property: - -- ethernet : Should be a phandle to a valid Ethernet device node. - This host device is what the switch port is - connected to. - -A user port has the following optional property: - -- label : Describes the label associated with this port, which - will become the netdev name. - -Port child nodes may also contain the following optional standardised -properties, described in binding documents: - -- phy-handle : Phandle to a PHY on an MDIO bus. See - Documentation/devicetree/bindings/net/ethernet.txt - for details. - -- phy-mode : See - Documentation/devicetree/bindings/net/ethernet.txt - for details. - -- fixed-link : Fixed-link subnode describing a link to a non-MDIO - managed entity. See - Documentation/devicetree/bindings/net/fixed-link.txt - for details. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Example - -The following example shows three switches on three MDIO busses, -linked into one DSA cluster. - -&mdio1 { - #address-cells = <1>; - #size-cells = <0>; - - switch0: switch0@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - local-mac-address = [00 00 00 00 00 00]; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - switch0port5: port@5 { - reg = <5>; - phy-mode = "rgmii-txid"; - link = <&switch1port6 - &switch2port9>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@6 { - reg = <6>; - ethernet = <&fec1>; - fixed-link { - speed = <100>; - full-duplex; - }; - }; - }; - }; -}; - -&mdio2 { - #address-cells = <1>; - #size-cells = <0>; - - switch1: switch1@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - - dsa,member = <0 1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan3"; - phy-handle = <&switch1phy0>; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-handle = <&switch1phy1>; - }; - - port@2 { - reg = <2>; - label = "lan5"; - phy-handle = <&switch1phy2>; - }; - - switch1port5: port@5 { - reg = <5>; - link = <&switch2port9>; - phy-mode = "rgmii-txid"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch1port6: port@6 { - reg = <6>; - phy-mode = "rgmii-txid"; - link = <&switch0port5>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - }; - switch1phy1: switch1phy0@1 { - reg = <1>; - }; - switch1phy2: switch1phy0@2 { - reg = <2>; - }; - }; - }; -}; - -&mdio4 { - #address-cells = <1>; - #size-cells = <0>; - - switch2: switch2@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - - dsa,member = <0 2>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan6"; - }; - - port@1 { - reg = <1>; - label = "lan7"; - }; - - port@2 { - reg = <2>; - label = "lan8"; - }; - - port@3 { - reg = <3>; - label = "optical3"; - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 2 - GPIO_ACTIVE_HIGH>; - }; - }; - - port@4 { - reg = <4>; - label = "optical4"; - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 3 - GPIO_ACTIVE_HIGH>; - }; - }; - - switch2port9: port@9 { - reg = <9>; - phy-mode = "rgmii-txid"; - link = <&switch1port5 - &switch0port5>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; +See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml new file mode 100644 index 000000000000..2abd036578d1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/dsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet Switch + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vladimir Oltean <olteanv@gmail.com> + +description: + This binding represents Ethernet Switches which have a dedicated CPU + port. That port is usually connected to an Ethernet Controller of the + SoC. Such setups are typical for embedded devices. + +select: false + +$ref: /schemas/net/ethernet-switch.yaml# + +properties: + dsa,member: + minItems: 2 + maxItems: 2 + description: + A two element list indicates which DSA cluster, and position within the + cluster a switch takes. <0 0> is cluster 0, switch 0. <0 1> is cluster 0, + switch 1. <1 0> is cluster 1, switch 0. A switch not part of any cluster + (single device hanging off a CPU port) must not specify this property + $ref: /schemas/types.yaml#/definitions/uint32-array + +additionalProperties: true + +$defs: + ethernet-ports: + description: A DSA switch without any extra port properties + $ref: '#' + + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9a-f]+$": + description: Ethernet switch ports + $ref: dsa-port.yaml# + unevaluatedProperties: false + +oneOf: + - required: + - ports + - required: + - ethernet-ports + +... diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml new file mode 100644 index 000000000000..4021b054f684 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/hirschmann,hellcreek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hirschmann Hellcreek TSN Switch + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vladimir Oltean <olteanv@gmail.com> + - Kurt Kanzenbach <kurt@linutronix.de> + +description: + The Hellcreek TSN Switch IP is a 802.1Q Ethernet compliant switch. It supports + the Precision Time Protocol, Hardware Timestamping as well the Time Aware + Shaper. + +properties: + compatible: + items: + - const: hirschmann,hellcreek-de1soc-r1 + + reg: + description: + The physical base address and size of TSN and PTP memory base + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: tsn + - const: ptp + + leds: + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^led@[01]$": + type: object + description: Hellcreek leds + $ref: /schemas/leds/common.yaml# + + properties: + reg: + items: + - enum: [0, 1] + description: Led number + + label: true + + default-state: true + + required: + - reg + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - ethernet-ports + - leds + +unevaluatedProperties: false + +examples: + - | + switch0: switch@ff240000 { + compatible = "hirschmann,hellcreek-de1soc-r1"; + reg = <0xff240000 0x1000>, + <0xff250000 0x1000>; + reg-names = "tsn", "ptp"; + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&gmac0>; + phy-mode = "mii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&phy2>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "sync_good"; + default-state = "on"; + }; + + led@1 { + reg = <1>; + label = "is_gm"; + default-state = "off"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt deleted file mode 100644 index 95e91e84151c..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ /dev/null @@ -1,125 +0,0 @@ -Microchip KSZ Series Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of the following: - - "microchip,ksz8765" - - "microchip,ksz8794" - - "microchip,ksz8795" - - "microchip,ksz9477" - - "microchip,ksz9897" - - "microchip,ksz9896" - - "microchip,ksz9567" - - "microchip,ksz8565" - - "microchip,ksz9893" - - "microchip,ksz9563" - - "microchip,ksz8563" - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to - 125MHz instead of 25MHz. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via SPI to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; - - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - ksz8565: ksz8565@0 { - compatible = "microchip,ksz8565"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 464d6bf87605..46a732087f5c 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -46,7 +46,6 @@ I2C managed mode: port@0 { /* RMII fixed link to master */ reg = <0>; - label = "cpu"; ethernet = <&master>; }; @@ -83,7 +82,6 @@ MDIO managed mode: port@0 { reg = <0>; - label = "cpu"; ethernet = <&master>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt index 886cbe8ffb38..8bb1eff21cb1 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt +++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt @@ -5,6 +5,10 @@ Required properties for GSWIP core: - compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the xRX200 SoC + "lantiq,xrx300-gswip" for the embedded GSWIP in the + xRX300 SoC + "lantiq,xrx330-gswip" for the embedded GSWIP in the + xRX330 SoC - reg : memory range of the GSWIP core registers : memory range of the GSWIP MDIO registers : memory range of the GSWIP MII registers @@ -92,7 +96,6 @@ switch@e108000 { port@6 { reg = <0x6>; - label = "cpu"; ethernet = <ð0>; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml new file mode 100644 index 000000000000..4f1adf00431a --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6060 DSA switch + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + The Marvell MV88E6060 switch has been produced and sold by Marvell + since at least 2008. The switch has one pin ADDR4 that controls the + MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus + connected to the switch, the PHYs inside the switch appear as + independent devices on address 0x00-0x04 or 0x10-0x14, so in difference + from many other DSA switches this switch does not have an internal + MDIO bus for the PHY devices. + +properties: + compatible: + const: marvell,mv88e6060 + description: + The MV88E6060 is the oldest Marvell DSA switch product, and + as such a bit limited in features compared to later hardware. + + reg: + maxItems: 1 + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@16 { + compatible = "marvell,mv88e6060"; + reg = <16>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + }; + ethernet-port@5 { + reg = <5>; + phy-mode = "rev-mii"; + ethernet = <ðc>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml new file mode 100644 index 000000000000..19f15bdd1c97 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml @@ -0,0 +1,337 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6xxx DSA switch family + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + The Marvell MV88E6xxx switch series has been produced and sold + by Marvell since at least 2008. The switch has a few compatibles which + just indicate the base address of the switch, then operating systems + can investigate switch ID registers to find out which actual version + of the switch it is dealing with. + +properties: + compatible: + oneOf: + - enum: + - marvell,mv88e6085 + - marvell,mv88e6190 + - marvell,mv88e6250 + description: | + marvell,mv88e6085: This switch uses base address 0x10. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6085" should be + specified. This includes the following list of MV88Exxxx switches: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176, + 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + marvell,mv88e6190: This switch uses base address 0x00. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6190" should be + specified. This includes the following list of MV88Exxxx switches: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + marvell,mv88e6250: This switch uses base address 0x08 or 0x18. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6250" should be + specified. This includes the following list of MV88Exxxx switches: + 6220, 6250 + - items: + - const: marvell,turris-mox-mv88e6085 + - const: marvell,mv88e6085 + - items: + - const: marvell,turris-mox-mv88e6190 + - const: marvell,mv88e6190 + + reg: + maxItems: 1 + + eeprom-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set to the length of an EEPROM connected to the switch. Must be + set if the switch can not detect the presence and/or size of a connected + EEPROM, otherwise optional. + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + interrupts: + description: The switch provides an external interrupt line, but it is + not always used by target systems. + maxItems: 1 + + interrupt-controller: + description: The switch has an internal interrupt controller used by + the different sub-blocks. + + '#interrupt-cells': + description: The internal interrupt controller only supports triggering + on active high level interrupts so the second cell must alway be set to + IRQ_TYPE_LEVEL_HIGH. + const: 2 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches have an varying combination of + internal and external MDIO buses, in some cases a combined bus that + can be used both internally and externally. This node is for the + primary bus, used internally and sometimes also externally. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches that have a separate external + MDIO bus use this port to access external components on the MDIO bus. + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan4"; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + }; + + ethernet-port@5 { + reg = <5>; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6190"; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + switch0phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + switch0phy7: ethernet-phy@7 { + reg = <0x7>; + }; + + switch0phy8: ethernet-phy@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + ethernet = <ð0>; + phy-mode = "rgmii"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + ethernet-port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + ethernet-port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + ethernet-port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + ethernet-port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + ethernet-port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + ethernet-port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + ethernet-port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + ethernet-port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + ethernet-port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + ethernet-port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 30c11fea491b..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6390"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml new file mode 100644 index 000000000000..1c2444121e60 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -0,0 +1,814 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7530 and MT7531 Ethernet Switches + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Landen Chao <Landen.Chao@mediatek.com> + - DENG Qingfang <dqfext@gmail.com> + - Sean Wang <sean.wang@mediatek.com> + - Daniel Golle <daniel@makrotopia.org> + +description: | + There are three versions of MT7530, standalone, in a multi-chip module and + built-into a SoC. + + MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN, + MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs. + + The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four + Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's + memory map rather than using MDIO. The switch got an internally connected 10G + CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs. + + MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs + and the switch registers are directly mapped into SoC's memory map rather than + using MDIO. The DSA driver currently doesn't support MT7620 variants. + + There is only the standalone version of MT7531. + + Port 5 on MT7530 has got various ways of configuration: + + - Port 5 can be used as a CPU port. + + - PHY 0 or 4 of the switch can be muxed to gmac5 of the switch. Therefore, + the gmac of the SoC which is wired to port 5 can connect to the PHY. + This is usually used for connecting the wan port directly to the CPU to + achieve 2 Gbps routing in total. + + The driver looks up the reg on the ethernet-phy node, which the phy-handle + property on the gmac node refers to, to mux the specified phy. + + The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the + compatible string and the reg must be 1. So, for now, only gmac1 of a + MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + + Check out example 5. + + - For the multi-chip module MT7530, in case of an external phy wired to + gmac1 of the SoC, port 5 must not be enabled. + + In case of muxing PHY 0 or 4, the external phy must not be enabled. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + + Check out example 6. + + - Port 5 can be wired to an external phy. Port 5 becomes a DSA user port. + + For the multi-chip module MT7530, the external phy must be wired TX to TX + to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired + this way. + + For the multi-chip module MT7530, muxing PHY 0 or 4 won't work when the + external phy is connected TX to TX. + + For the MT7621 SoCs, rgmii2 group must be claimed with gpio function. + + Check out example 7. + +properties: + compatible: + oneOf: + - description: + Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC + const: mediatek,mt7530 + + - description: + Standalone MT7531 + const: mediatek,mt7531 + + - description: + Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs + const: mediatek,mt7621 + + - description: + Built-in switch of the MT7988 SoC + const: mediatek,mt7988-switch + + reg: + maxItems: 1 + + core-supply: + description: + Phandle to the regulator node necessary for the core power. + + "#gpio-cells": + const: 2 + + gpio-controller: + type: boolean + description: | + If defined, LED controller of the MT7530 switch will run on GPIO mode. + + There are 15 controllable pins. + port 0 LED 0..2 as GPIO 0..2 + port 1 LED 0..2 as GPIO 3..5 + port 2 LED 0..2 as GPIO 6..8 + port 3 LED 0..2 as GPIO 9..11 + port 4 LED 0..2 as GPIO 12..14 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + io-supply: + description: | + Phandle to the regulator node necessary for the I/O power. + See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for + details for the regulator setup on these boards. + + mediatek,mcm: + type: boolean + description: + Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530 + switch is a part of the multi-chip module. + + reset-gpios: + description: | + GPIO to reset the switch. Use this if mediatek,mcm is not used. + This property is optional because some boards share the reset line with + other components which makes it impossible to probe the switch if the + reset line is used. + maxItems: 1 + + reset-names: + const: mcm + + resets: + description: + Phandle pointing to the system reset controller with line index for the + ethsys. + maxItems: 1 + +patternProperties: + "^(ethernet-)?ports$": + type: object + additionalProperties: true + + patternProperties: + "^(ethernet-)?port@[0-6]$": + type: object + additionalProperties: true + + properties: + reg: + description: + Port address described must be 5 or 6 for CPU port and from 0 to 5 + for user ports. + + allOf: + - if: + required: [ ethernet ] + then: + properties: + reg: + enum: + - 5 + - 6 + +required: + - compatible + - reg + +$defs: + mt7530-dsa-port: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-6]$": + if: + required: [ ethernet ] + then: + if: + properties: + reg: + const: 5 + then: + properties: + phy-mode: + enum: + - gmii + - mii + - rgmii + else: + properties: + phy-mode: + enum: + - rgmii + - trgmii + + mt7531-dsa-port: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-6]$": + if: + required: [ ethernet ] + then: + if: + properties: + reg: + const: 5 + then: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - rgmii + - sgmii + else: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - sgmii + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - if: + required: + - mediatek,mcm + then: + properties: + reset-gpios: false + + required: + - resets + - reset-names + + - dependencies: + interrupt-controller: [ interrupts ] + + - if: + properties: + compatible: + const: mediatek,mt7530 + then: + $ref: "#/$defs/mt7530-dsa-port" + required: + - core-supply + - io-supply + + - if: + properties: + compatible: + const: mediatek,mt7531 + then: + $ref: "#/$defs/mt7531-dsa-port" + properties: + gpio-controller: false + mediatek,mcm: false + + - if: + properties: + compatible: + const: mediatek,mt7621 + then: + $ref: "#/$defs/mt7530-dsa-port" + required: + - mediatek,mcm + + - if: + properties: + compatible: + const: mediatek,mt7988-switch + then: + $ref: "#/$defs/mt7530-dsa-port" + properties: + gpio-controller: false + mediatek,mcm: false + reset-names: false + +unevaluatedProperties: false + +examples: + # Example 1: Standalone MT7530 + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7530"; + reg = <0x1f>; + + reset-gpios = <&pio 33 0>; + + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 2: MT7530 in MT7623AI SoC + - | + #include <dt-bindings/reset/mt2701-resets.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7530"; + reg = <0x1f>; + + mediatek,mcm; + resets = <ðsys MT2701_ETHSYS_MCM_RST>; + reset-names = "mcm"; + + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 3: Standalone MT7531 + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + + reset-gpios = <&pio 54 0>; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1 + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + phy-mode = "rgmii"; + phy-handle = <&example5_ethphy4>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* MT7530's phy4 */ + example5_ethphy4: ethernet-phy@4 { + reg = <4>; + }; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + /* Commented out, phy4 is connected to gmac1. + port@4 { + reg = <4>; + label = "wan"; + }; + */ + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + }; + + # Example 6: MT7621: mux external phy to SoC's gmac1 + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + phy-mode = "rgmii"; + phy-handle = <&example6_ethphy7>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* External PHY */ + example6_ethphy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii"; + }; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + }; + + # Example 7: MT7621: mux external phy to MT7530's port 5 + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* External PHY */ + example7_ethphy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii"; + }; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "extphy"; + phy-mode = "rgmii-txid"; + phy-handle = <&example7_ethphy7>; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml new file mode 100644 index 000000000000..c963dc09e8e1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip KSZ Series Ethernet switches + +maintainers: + - Marek Vasut <marex@denx.de> + - Woojung Huh <Woojung.Huh@microchip.com> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional + # required and optional properties. + compatible: + enum: + - microchip,ksz8765 + - microchip,ksz8794 + - microchip,ksz8795 + - microchip,ksz8863 + - microchip,ksz8873 + - microchip,ksz9477 + - microchip,ksz9897 + - microchip,ksz9896 + - microchip,ksz9567 + - microchip,ksz8565 + - microchip,ksz9893 + - microchip,ksz9563 + - microchip,ksz8563 + + reset-gpios: + description: + Should be a gpio specifier for a reset line. + maxItems: 1 + + wakeup-source: true + + microchip,synclko-125: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz. + + microchip,synclko-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the output SYNCLKO clock should be disabled. Do not mix with + microchip,synclko-125. + + microchip,io-drive-strength-microamp: + description: + IO Pad Drive Strength + enum: [8000, 16000] + default: 16000 + + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 8000 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +if: + not: + properties: + compatible: + enum: + - microchip,ksz8863 + - microchip,ksz8873 +then: + $ref: dsa.yaml#/$defs/ethernet-ports +else: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-2]$": + $ref: dsa-port.yaml# + unevaluatedProperties: false + properties: + microchip,rmii-clk-internal: + $ref: /schemas/types.yaml#/definitions/flag + description: + When ksz88x3 is acting as clock provier (via REFCLKO) it + can select between internal and external RMII reference + clock. Internal reference clock means that the clock for + the RMII of ksz88x3 is provided by the ksz88x3 internally + and the REFCLKI pin is unconnected. For the external + reference clock, the clock needs to be fed back to ksz88x3 + via REFCLKI. + If microchip,rmii-clk-internal is set, ksz88x3 will provide + rmii reference clock internally, otherwise reference clock + should be provided externally. + dependencies: + microchip,rmii-clk-internal: [ethernet] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + // Ethernet switch connected via SPI to the host, CPU port wired to eth0: + eth0 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; + + ksz9477: switch@0 { + compatible = "microchip,ksz9477"; + reg = <0>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <44000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + ethernet = <ð0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + ksz8565: switch@1 { + compatible = "microchip,ksz8565"; + reg = <1>; + + spi-max-frequency = <44000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + ethernet = <ð0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml new file mode 100644 index 000000000000..9973d64f15a7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LAN937x Ethernet Switch Series + +maintainers: + - UNGLinuxDriver@microchip.com + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +properties: + compatible: + enum: + - microchip,lan9370 + - microchip,lan9371 + - microchip,lan9372 + - microchip,lan9373 + - microchip,lan9374 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + reset-gpios: + description: Optional gpio specifier for a reset line + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + +patternProperties: + "^(ethernet-)?ports$": + additionalProperties: true + patternProperties: + "^(ethernet-)?port@[0-7]$": + allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-id + - rgmii-txid + - rgmii-rxid + then: + properties: + rx-internal-delay-ps: + enum: [0, 2000] + default: 0 + tx-internal-delay-ps: + enum: [0, 2000] + default: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + macb0 { + #address-cells = <1>; + #size-cells = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + lan9374: switch@0 { + compatible = "microchip,lan9374"; + reg = <0>; + spi-max-frequency = <44000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&t1phy0>; + }; + + port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&t1phy1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&t1phy2>; + }; + + port@3 { + reg = <3>; + label = "lan6"; + phy-mode = "internal"; + phy-handle = <&t1phy3>; + }; + + port@4 { + reg = <4>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + ethernet = <&macb0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "lan5"; + phy-mode = "internal"; + phy-handle = <&t1phy6>; + }; + + port@7 { + reg = <7>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&t1phy7>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + t1phy0: ethernet-phy@0{ + reg = <0x0>; + }; + + t1phy1: ethernet-phy@1{ + reg = <0x1>; + }; + + t1phy2: ethernet-phy@2{ + reg = <0x2>; + }; + + t1phy3: ethernet-phy@3{ + reg = <0x3>; + }; + + t1phy6: ethernet-phy@6{ + reg = <0x6>; + }; + + t1phy7: ethernet-phy@7{ + reg = <0x7>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml new file mode 100644 index 000000000000..fe02d05196e4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Ocelot Switch Family + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - UNGLinuxDriver@microchip.com + +description: | + There are multiple switches which are either part of the Ocelot-1 family, or + derivatives of this architecture. These switches can be found embedded in + various SoCs and accessed using MMIO, or as discrete chips and accessed over + SPI or PCIe. The present DSA binding shall be used when the host controlling + them performs packet I/O primarily through an Ethernet port of the switch + (which is attached to an Ethernet port of the host), rather than through + Frame DMA or register-based I/O. + + VSC9953 (Seville): + + This is found in the NXP T1040, where it is a memory-mapped platform + device. + + The following PHY interface types are supported: + + - phy-mode = "internal": on ports 8 and 9 + - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 + - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 + - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7 + + VSC9959 (Felix): + + This is found in the NXP LS1028A. It is a PCI device, part of the larger + enetc root complex. As a result, the ethernet-switch node is a sub-node of + the PCIe root complex node and its "reg" property conforms to the parent + node bindings, describing it as PF 5 of device 0, bus 0. + + If any external switch port is enabled, the enetc PF2 (enetc_port2) should + be enabled as well. This is because the internal MDIO bus (exposed through + EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc + port 2 and not to Felix. + + The following PHY interface types are supported: + + - phy-mode = "internal": on ports 4 and 5 + - phy-mode = "sgmii": on ports 0, 1, 2, 3 + - phy-mode = "qsgmii": on ports 0, 1, 2, 3 + - phy-mode = "usxgmii": on ports 0, 1, 2, 3 + - phy-mode = "1000base-x": on ports 0, 1, 2, 3 + - phy-mode = "2500base-x": on ports 0, 1, 2, 3 + +properties: + compatible: + enum: + - mscc,vsc9953-switch + - pci1957,eef0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + description: + Used to signal availability of PTP TX timestamps, and state changes of + the MAC merge layer of ports that support Frame Preemption. + + little-endian: true + big-endian: true + +required: + - compatible + - reg + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - if: + properties: + compatible: + const: pci1957,eef0 + then: + required: + - interrupts + +unevaluatedProperties: false + +examples: + # Felix VSC9959 (NXP LS1028A) + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie { /* Integrated Endpoint Root Complex */ + #address-cells = <3>; + #size-cells = <2>; + + ethernet-switch@0,5 { + compatible = "pci1957,eef0"; + reg = <0x000500 0 0 0 0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "qsgmii"; + phy-handle = <&phy0>; + managed = "in-band-status"; + }; + + port@1 { + reg = <1>; + phy-mode = "qsgmii"; + phy-handle = <&phy1>; + managed = "in-band-status"; + }; + + port@2 { + reg = <2>; + phy-mode = "qsgmii"; + phy-handle = <&phy2>; + managed = "in-band-status"; + }; + + port@3 { + reg = <3>; + phy-mode = "qsgmii"; + phy-handle = <&phy3>; + managed = "in-band-status"; + }; + + port@4 { + reg = <4>; + ethernet = <&enetc_port2>; + phy-mode = "internal"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + port@5 { + reg = <5>; + ethernet = <&enetc_port3>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + # Seville VSC9953 (NXP T1040) + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + little-endian; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "qsgmii"; + phy-handle = <&phy0>; + managed = "in-band-status"; + }; + + port@1 { + reg = <1>; + phy-mode = "qsgmii"; + phy-handle = <&phy1>; + managed = "in-band-status"; + }; + + port@2 { + reg = <2>; + phy-mode = "qsgmii"; + phy-handle = <&phy2>; + managed = "in-band-status"; + }; + + port@3 { + reg = <3>; + phy-mode = "qsgmii"; + phy-handle = <&phy3>; + managed = "in-band-status"; + }; + + port@4 { + reg = <4>; + phy-mode = "qsgmii"; + phy-handle = <&phy4>; + managed = "in-band-status"; + }; + + port@5 { + reg = <5>; + phy-mode = "qsgmii"; + phy-handle = <&phy5>; + managed = "in-band-status"; + }; + + port@6 { + reg = <6>; + phy-mode = "qsgmii"; + phy-handle = <&phy6>; + managed = "in-band-status"; + }; + + port@7 { + reg = <7>; + phy-mode = "qsgmii"; + phy-handle = <&phy7>; + managed = "in-band-status"; + }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + port@9 { + reg = <9>; + phy-mode = "internal"; + ethernet = <&enet1>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt deleted file mode 100644 index c5ed5d25f642..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ /dev/null @@ -1,310 +0,0 @@ -Mediatek MT7530 Ethernet switch -================================ - -Required properties: - -- compatible: may be compatible = "mediatek,mt7530" - or compatible = "mediatek,mt7621" -- #address-cells: Must be 1. -- #size-cells: Must be 0. -- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part - on multi-chip module belong to MT7623A has or the remotely standalone - chip as the function MT7623N reference board provided for. - -If compatible mediatek,mt7530 is set then the following properties are required - -- core-supply: Phandle to the regulator node necessary for the core power. -- io-supply: Phandle to the regulator node necessary for the I/O power. - See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt - for details for the regulator setup on these boards. - -If the property mediatek,mcm isn't defined, following property is required - -- reset-gpios: Should be a gpio specifier for a reset line. - -Else, following properties are required - -- resets : Phandle pointing to the system reset controller with - line index for the ethsys. -- reset-names : Should be set to "mcm". - -Required properties for the child nodes within ports container: - -- reg: Port address described must be 6 for CPU port and from 0 to 5 for - user ports. -- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled - "cpu". - -Port 5 of the switch is muxed between: -1. GMAC5: GMAC5 can interface with another external MAC or PHY. -2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC - of the SOC. Used in many setups where port 0/4 becomes the WAN port. - Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to - GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not - connected to external component! - -Port 5 modes/configurations: -1. Port 5 is disabled and isolated: An external phy can interface to the 2nd - GMAC of the SOC. - In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd - GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! -2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. - It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode - and RGMII delay. -3. Port 5 is muxed to GMAC5 and can interface to an external phy. - Port 5 becomes an extra switch port. - Only works on platform where external phy TX<->RX lines are swapped. - Like in the Ubiquiti ER-X-SFP. -4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. - Currently a 2nd CPU port is not supported by DSA code. - -Depending on how the external PHY is wired: -1. normal: The PHY can only connect to 2nd GMAC but not to the switch -2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as - a ethernet port. But can't interface to the 2nd GMAC. - -Based on the DT the port 5 mode is configured. - -Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. -When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. -phy-mode must be set, see also example 2 below! - * mt7621: phy-mode = "rgmii-txid"; - * mt7623: phy-mode = "rgmii"; - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required, optional properties and how the integrated switch subnodes must -be specified. - -Example: - - &mdio0 { - switch@0 { - compatible = "mediatek,mt7530"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - core-supply = <&mt6323_vpa_reg>; - io-supply = <&mt6323_vemc3v3_reg>; - reset-gpios = <&pio 33 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "trgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; - -Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4. - -ð { - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "rgmii-txid"; - phy-handle = <&phy4>; - }; - - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - /* Internal phy */ - phy4: ethernet-phy@4 { - reg = <4>; - }; - - mt7530: switch@1f { - compatible = "mediatek,mt7621"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1f>; - pinctrl-names = "default"; - mediatek,mcm; - - resets = <&rstctrl 2>; - reset-names = "mcm"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - -/* Commented out. Port 4 is handled by 2nd GMAC. - port@4 { - reg = <4>; - label = "lan4"; - }; -*/ - - cpu_port0: port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - }; - }; -}; - -Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY. - -ð { - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - /* External phy */ - ephy5: ethernet-phy@7 { - reg = <7>; - }; - - mt7530: switch@1f { - compatible = "mediatek,mt7621"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1f>; - pinctrl-names = "default"; - mediatek,mcm; - - resets = <&rstctrl 2>; - reset-names = "mcm"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@4 { - reg = <4>; - label = "lan4"; - }; - - port@5 { - reg = <5>; - label = "lan5"; - phy-mode = "rgmii"; - phy-handle = <&ephy5>; - }; - - cpu_port0: port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml new file mode 100644 index 000000000000..9432565f4f5d --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP SJA1105 Automotive Ethernet Switch Family + +description: + The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at + least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum + cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed + depends on the SPI bus master driver. + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + +properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105t + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1110a + - nxp,sja1110b + - nxp,sja1110c + - nxp,sja1110d + + reg: + maxItems: 1 + + spi-cpha: true + spi-cpol: true + + # Optional container node for the 2 internal MDIO buses of the SJA1110 + # (one for the internal 100base-T1 PHYs and the other for the single + # 100base-TX PHY). The "reg" property does not have physical significance. + # The PHY addresses to port correspondence is as follows: for 100base-T1, + # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has + # PHY 1. + mdios: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^mdio@[0-1]$": + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + properties: + compatible: + oneOf: + - enum: + - nxp,sja1110-base-t1-mdio + - nxp,sja1110-base-tx-mdio + + reg: + oneOf: + - enum: + - 0 + - 1 + + required: + - compatible + - reg + +patternProperties: + "^(ethernet-)?ports$": + additionalProperties: true + patternProperties: + "^(ethernet-)?port@[0-9]$": + allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id + then: + properties: + rx-internal-delay-ps: + $ref: "#/$defs/internal-delay-ps" + tx-internal-delay-ps: + $ref: "#/$defs/internal-delay-ps" + +required: + - compatible + - reg + +$defs: + internal-delay-ps: + description: + Disable tunable delay lines using 0 ps, or enable them and select + the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps + (101.7 degree shift) in increments of 0.9 degrees (20 ps). + enum: + [0, 1640, 1660, 1680, 1700, 1720, 1740, 1760, 1780, 1800, 1820, 1840, + 1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080, + 2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260] + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1105t + then: + properties: + spi-cpol: false + required: + - spi-cpha + else: + properties: + spi-cpha: false + required: + - spi-cpol + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1 { + reg = <0x1>; + compatible = "nxp,sja1105t"; + spi-cpha; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <0>; + }; + + port@1 { + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <1>; + }; + + port@2 { + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <2>; + }; + + port@3 { + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <3>; + }; + + port@4 { + ethernet = <&enet2>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt deleted file mode 100644 index ccbc6d89325d..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ /dev/null @@ -1,175 +0,0 @@ -* Qualcomm Atheros QCA8xxx switch family - -Required properties: - -- compatible: should be one of: - "qca,qca8334" - "qca,qca8337" - -- #size-cells: must be 0 -- #address-cells: must be 1 - -Optional properties: - -- reset-gpios: GPIO to be used to reset the whole device - -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external -mdio-bus each subnode describing a port needs to have a valid phandle -referencing the internal PHY it is connected to. This is because there's no -N:N mapping of port and PHY id. - -Don't use mixed external and internal mdio-bus configurations, as this is -not supported by the hardware. - -The CPU port of this switch is always port 0. - -A CPU port node has the following optional node: - -- fixed-link : Fixed-link subnode describing a link to a non-MDIO - managed entity. See - Documentation/devicetree/bindings/net/fixed-link.txt - for details. - -For QCA8K the 'fixed-link' sub-node supports only the following properties: - -- 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -- 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. - -Examples: - -for the external mdio-bus configuration: - - &mdio0 { - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - fixed-link { - speed = 1000; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-handle = <&phy_port5>; - }; - }; - }; - }; - -for the internal master mdio-bus configuration: - - &mdio0 { - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - fixed-link { - speed = 1000; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@4 { - reg = <4>; - label = "lan4"; - }; - - port@5 { - reg = <5>; - label = "wan"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml new file mode 100644 index 000000000000..167398ab253a --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -0,0 +1,321 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros QCA83xx switch family + +maintainers: + - John Crispin <john@phrozen.org> + +description: + If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode + describing a port needs to have a valid phandle referencing the internal PHY + it is connected to. This is because there is no N:N mapping of port and PHY + ID. To declare the internal mdio-bus configuration, declare an MDIO node in + the switch node and declare the phandle for the port, referencing the internal + PHY it is connected to. In this config, an internal mdio-bus is registered and + the MDIO master is used for communication. Mixed external and internal + mdio-bus configurations are not supported by the hardware. + Each phy has at most 3 LEDs connected and can be declared + using the standard LEDs structure. + +properties: + compatible: + oneOf: + - enum: + - qca,qca8327 + - qca,qca8328 + - qca,qca8334 + - qca,qca8337 + description: | + qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package + qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package + qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package + qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package + + reg: + maxItems: 1 + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + qca,ignore-power-on-sel: + $ref: /schemas/types.yaml#/definitions/flag + description: + Ignore power-on pin strapping to configure LED open-drain or EEPROM + presence. This is needed for devices with incorrect configuration or when + the OEM has decided not to use pin strapping and falls back to SW regs. + + qca,led-open-drain: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to + be set, otherwise the driver will fail at probe. This is required if the + OEM does not use pin strapping to set this mode and prefers to set it + using SW regs. The pin strappings related to LED open-drain mode are + B68 on the QCA832x and B49 on the QCA833x. + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Qca8k switch have an internal mdio to access switch port. + If this is not present, the legacy mapping is used and the + internal mdio access is used. + With the legacy mapping the reg corresponding to the internal + mdio is the switch reg with an offset of -1. + +$ref: dsa.yaml# + +patternProperties: + "^(ethernet-)?ports$": + type: object + additionalProperties: true + patternProperties: + "^(ethernet-)?port@[0-6]$": + type: object + description: Ethernet switch ports + + $ref: dsa-port.yaml# + + properties: + qca,sgmii-rxclk-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set the receive clock phase to falling edge. Mostly commonly used on + the QCA8327 with CPU port 0 set to SGMII. + + qca,sgmii-txclk-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set the transmit clock phase to falling edge. + + qca,sgmii-enable-pll: + $ref: /schemas/types.yaml#/definitions/flag + description: + For SGMII CPU port, explicitly enable PLL, TX and RX chain along with + Signal Detection. On the QCA8327 this should not be enabled, otherwise + the SGMII port will not initialize. When used on the QCA8337, revision 3 + or greater, a warning will be displayed. When the CPU port is set to + SGMII on the QCA8337, it is advised to set this unless a communication + issue is observed. + + unevaluatedProperties: false + +oneOf: + - required: + - ports + - required: + - ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + external_phy_port1: ethernet-phy@0 { + reg = <0>; + }; + + external_phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + external_phy_port3: ethernet-phy@2 { + reg = <2>; + }; + + external_phy_port4: ethernet-phy@3 { + reg = <3>; + }; + + external_phy_port5: ethernet-phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&external_phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&external_phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&external_phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-handle = <&external_phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&external_phy_port5>; + }; + }; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@10 { + compatible = "qca,qca8337"; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port5>; + }; + + port@6 { + reg = <0>; + ethernet = <&gmac1>; + phy-mode = "sgmii"; + + qca,sgmii-rxclk-falling-edge; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + internal_phy_port1: ethernet-phy@0 { + reg = <0>; + }; + + internal_phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + internal_phy_port3: ethernet-phy@2 { + reg = <2>; + }; + + internal_phy_port4: ethernet-phy@3 { + reg = <3>; + }; + + internal_phy_port5: ethernet-phy@4 { + reg = <4>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt deleted file mode 100644 index b6ae8541bd55..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt +++ /dev/null @@ -1,153 +0,0 @@ -Realtek SMI-based Switches -========================== - -The SMI "Simple Management Interface" is a two-wire protocol using -bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does -not use the MDIO protocol. This binding defines how to specify the -SMI-based Realtek devices. - -Required properties: - -- compatible: must be exactly one of: - "realtek,rtl8366" - "realtek,rtl8366rb" (4+1 ports) - "realtek,rtl8366s" (4+1 ports) - "realtek,rtl8367" - "realtek,rtl8367b" - "realtek,rtl8368s" (8 port) - "realtek,rtl8369" - "realtek,rtl8370" (8 port) - -Required properties: -- mdc-gpios: GPIO line for the MDC clock line. -- mdio-gpios: GPIO line for the MDIO data line. -- reset-gpios: GPIO line for the reset signal. - -Optional properties: -- realtek,disable-leds: if the LED drivers are not used in the - hardware design this will disable them so they are not turned on - and wasting power. - -Required subnodes: - -- interrupt-controller - - This defines an interrupt controller with an IRQ line (typically - a GPIO) that will demultiplex and handle the interrupt from the single - interrupt line coming out of one of the SMI-based chips. It most - importantly provides link up/down interrupts to the PHY blocks inside - the ASIC. - -Required properties of interrupt-controller: - -- interrupt: parent interrupt, see interrupt-controller/interrupts.txt -- interrupt-controller: see interrupt-controller/interrupts.txt -- #address-cells: should be <0> -- #interrupt-cells: should be <1> - -- mdio - - This defines the internal MDIO bus of the SMI device, mostly for the - purpose of being able to hook the interrupts to the right PHY and - the right PHY to the corresponding port. - -Required properties of mdio: - -- compatible: should be set to "realtek,smi-mdio" for all SMI devices - -See net/mdio.txt for additional MDIO bus properties. - -See net/dsa/dsa.txt for a list of additional required and optional properties -and subnodes of DSA switches. - -Examples: - -switch { - compatible = "realtek,rtl8366rb"; - /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ - mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - - switch_intc: interrupt-controller { - /* GPIO 15 provides the interrupt */ - interrupt-parent = <&gpio0>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - port@0 { - reg = <0>; - label = "lan0"; - phy-handle = <&phy0>; - }; - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&phy1>; - }; - port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&phy2>; - }; - port@3 { - reg = <3>; - label = "lan3"; - phy-handle = <&phy3>; - }; - port@4 { - reg = <4>; - label = "wan"; - phy-handle = <&phy4>; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - compatible = "realtek,smi-mdio", "dsa-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - phy0: phy@0 { - reg = <0>; - interrupt-parent = <&switch_intc>; - interrupts = <0>; - }; - phy1: phy@1 { - reg = <1>; - interrupt-parent = <&switch_intc>; - interrupts = <1>; - }; - phy2: phy@2 { - reg = <2>; - interrupt-parent = <&switch_intc>; - interrupts = <2>; - }; - phy3: phy@3 { - reg = <3>; - interrupt-parent = <&switch_intc>; - interrupts = <3>; - }; - phy4: phy@4 { - reg = <4>; - interrupt-parent = <&switch_intc>; - interrupts = <12>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml new file mode 100644 index 000000000000..cce692f57b08 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -0,0 +1,388 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/realtek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek switches for unmanaged switches + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + Realtek advertises these chips as fast/gigabit switches or unmanaged + switches. They can be controlled using different interfaces, like SMI, + MDIO or SPI. + + The SMI "Simple Management Interface" is a two-wire protocol using + bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does + not use the MDIO protocol. This binding defines how to specify the + SMI-based Realtek devices. The realtek-smi driver is a platform driver + and it must be inserted inside a platform node. + + The MDIO-connected switches use MDIO protocol to access their registers. + The realtek-mdio driver is an MDIO driver and it must be inserted inside + an MDIO node. + + The compatible string is only used to identify which (silicon) family the + switch belongs to. Roughly speaking, a family is any set of Realtek switches + whose chip identification register(s) have a common location and semantics. + The different models in a given family can be automatically disambiguated by + parsing the chip identification register(s) according to the given family, + avoiding the need for a unique compatible string for each model. + +properties: + compatible: + enum: + - realtek,rtl8365mb + - realtek,rtl8366rb + description: | + realtek,rtl8365mb: + Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB, + RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S, + RTL8367SB, RTL8370MB, RTL8310SR + realtek,rtl8366rb: + Use with models RTL8366RB, RTL8366S + + mdc-gpios: + description: GPIO line for the MDC clock line. + maxItems: 1 + + mdio-gpios: + description: GPIO line for the MDIO data line. + maxItems: 1 + + reset-gpios: + description: GPIO to be used to reset the whole device + maxItems: 1 + + realtek,disable-leds: + type: boolean + description: | + if the LED drivers are not used in the hardware design, + this will disable them so they are not turned on + and wasting power. + + interrupt-controller: + type: object + additionalProperties: false + + description: | + This defines an interrupt controller with an IRQ line (typically + a GPIO) that will demultiplex and handle the interrupt from the single + interrupt line coming out of one of the Realtek switch chips. It most + importantly provides link up/down interrupts to the PHY blocks inside + the ASIC. + + properties: + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: + A single IRQ line from the switch, either active LOW or HIGH + + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + required: + - interrupt-controller + - '#address-cells' + - '#interrupt-cells' + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + properties: + compatible: + const: realtek,smi-mdio + +if: + required: + - reg + +then: + $ref: /schemas/spi/spi-peripheral-props.yaml# + not: + required: + - mdc-gpios + - mdio-gpios + - mdio + + properties: + mdc-gpios: false + mdio-gpios: false + mdio: false + +else: + required: + - mdc-gpios + - mdio-gpios + - mdio + - reset-gpios + +required: + - compatible + + # - mdc-gpios + # - mdio-gpios + # - reset-gpios + # - mdio + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + platform { + switch { + compatible = "realtek,rtl8366rb"; + /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ + mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + + switch_intc1: interrupt-controller { + /* GPIO 15 provides the interrupt */ + interrupt-parent = <&gpio0>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&phy2>; + }; + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&phy3>; + }; + port@4 { + reg = <4>; + label = "wan"; + phy-handle = <&phy4>; + }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc1>; + interrupts = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc1>; + interrupts = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc1>; + interrupts = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc1>; + interrupts = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + interrupt-parent = <&switch_intc1>; + interrupts = <12>; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + platform { + switch { + compatible = "realtek,rtl8365mb"; + mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + switch_intc2: interrupt-controller { + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "swp0"; + phy-handle = <ðphy0>; + }; + port@1 { + reg = <1>; + label = "swp1"; + phy-handle = <ðphy1>; + }; + port@2 { + reg = <2>; + label = "swp2"; + phy-handle = <ðphy2>; + }; + port@3 { + reg = <3>; + label = "swp3"; + phy-handle = <ðphy3>; + }; + port@6 { + reg = <6>; + ethernet = <&fec1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc2>; + interrupts = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc2>; + interrupts = <1>; + }; + ethphy2: ethernet-phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc2>; + interrupts = <2>; + }; + ethphy3: ethernet-phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc2>; + interrupts = <3>; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@29 { + compatible = "realtek,rtl8365mb"; + reg = <29>; + + reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + + switch_intc3: interrupt-controller { + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@7 { + reg = <7>; + ethernet = <ðernet>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml new file mode 100644 index 000000000000..ea285ef3e64f --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Advanced 5 ports ethernet switch + +maintainers: + - Clément Léger <clement.leger@bootlin.com> + +description: | + The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and + handles 4 ports + 1 CPU management port. + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-a5psw + - const: renesas,rzn1-a5psw + + reg: + maxItems: 1 + + interrupts: + items: + - description: Device Level Ring (DLR) interrupt + - description: Switch interrupt + - description: Parallel Redundancy Protocol (PRP) interrupt + - description: Integrated HUB module interrupt + - description: Receive Pattern Match interrupt + + interrupt-names: + items: + - const: dlr + - const: switch + - const: prp + - const: hub + - const: ptrn + + power-domains: + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + clocks: + items: + - description: AHB clock used for the switch register interface + - description: Switch system clock + + clock-names: + items: + - const: hclk + - const: clk + + ethernet-ports: + type: object + additionalProperties: true + patternProperties: + "^(ethernet-)?port@[0-4]$": + type: object + additionalProperties: true + properties: + pcs-handle: + maxItems: 1 + description: + phandle pointing to a PCS sub-node compatible with + renesas,rzn1-miic.yaml# + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + switch@44050000 { + compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; + reg = <0x44050000 0x10000>; + clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>; + clock-names = "hclk", "clk"; + power-domains = <&sysctrl>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dlr", "switch", "prp", "hub", "ptrn"; + + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&switch0phy3>; + pcs-handle = <&mii_conv4>; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + pcs-handle = <&mii_conv3>; + }; + + port@4 { + reg = <4>; + ethernet = <&gmac2>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>; + reset-delay-us = <15>; + clock-frequency = <2500000>; + + switch0phy1: ethernet-phy@1{ + reg = <1>; + }; + + switch0phy3: ethernet-phy@3{ + reg = <3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt deleted file mode 100644 index 13fd21074d48..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/sja1105.txt +++ /dev/null @@ -1,156 +0,0 @@ -NXP SJA1105 switch driver -========================= - -Required properties: - -- compatible: - Must be one of: - - "nxp,sja1105e" - - "nxp,sja1105t" - - "nxp,sja1105p" - - "nxp,sja1105q" - - "nxp,sja1105r" - - "nxp,sja1105s" - - Although the device ID could be detected at runtime, explicit bindings - are required in order to be able to statically check their validity. - For example, SGMII can only be specified on port 4 of R and S devices, - and the non-SGMII devices, while pin-compatible, are not equal in terms - of support for RGMII internal delays (supported on P/Q/R/S, but not on - E/T). - -Optional properties: - -- sja1105,role-mac: -- sja1105,role-phy: - Boolean properties that can be assigned under each port node. By - default (unless otherwise specified) a port is configured as MAC if it - is driving a PHY (phy-handle is present) or as PHY if it is PHY-less - (fixed-link specified, presumably because it is connected to a MAC). - The effect of this property (in either its implicit or explicit form) - is: - - In the case of MII or RMII it specifies whether the SJA1105 port is a - clock source or sink for this interface (not applicable for RGMII - where there is a Tx and an Rx clock). - - In the case of RGMII it affects the behavior regarding internal - delays: - 1. If sja1105,role-mac is specified, and the phy-mode property is one - of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity - designated to apply the delay/clock skew necessary for RGMII - is the PHY. The SJA1105 MAC does not apply any internal delays. - 2. If sja1105,role-phy is specified, and the phy-mode property is one - of the above, the designated entity to apply the internal delays - is the SJA1105 MAC (if hardware-supported). This is only supported - by the second-generation (P/Q/R/S) hardware. On a first-generation - E or T device, it is an error to specify an RGMII phy-mode other - than "rgmii" for a port that is in fixed-link mode. In that case, - the clock skew must either be added by the MAC at the other end of - the fixed-link, or by PCB serpentine traces on the board. - These properties are required, for example, in the case where SJA1105 - ports are at both ends of a MII/RMII PHY-less setup. One end would need - to have sja1105,role-mac, while the other sja1105,role-phy. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard -DSA required and optional properties. - -Other observations ------------------- - -The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least -one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum -cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed -depends on the SPI bus master driver. - -Example -------- - -Ethernet switch connected via SPI to the host, CPU port wired to enet2: - -arch/arm/boot/dts/ls1021a-tsn.dts: - -/* SPI controller of the LS1021 */ -&dspi0 { - sja1105@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,sja1105t"; - spi-max-frequency = <4000000>; - fsl,spi-cs-sck-delay = <1000>; - fsl,spi-sck-cs-delay = <1000>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - /* ETH5 written on chassis */ - label = "swp5"; - phy-handle = <&rgmii_phy6>; - phy-mode = "rgmii-id"; - reg = <0>; - /* Implicit "sja1105,role-mac;" */ - }; - port@1 { - /* ETH2 written on chassis */ - label = "swp2"; - phy-handle = <&rgmii_phy3>; - phy-mode = "rgmii-id"; - reg = <1>; - /* Implicit "sja1105,role-mac;" */ - }; - port@2 { - /* ETH3 written on chassis */ - label = "swp3"; - phy-handle = <&rgmii_phy4>; - phy-mode = "rgmii-id"; - reg = <2>; - /* Implicit "sja1105,role-mac;" */ - }; - port@3 { - /* ETH4 written on chassis */ - phy-handle = <&rgmii_phy5>; - label = "swp4"; - phy-mode = "rgmii-id"; - reg = <3>; - /* Implicit "sja1105,role-mac;" */ - }; - port@4 { - /* Internal port connected to eth2 */ - ethernet = <&enet2>; - phy-mode = "rgmii"; - reg = <4>; - /* Implicit "sja1105,role-phy;" */ - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -/* MDIO controller of the LS1021 */ -&mdio0 { - /* BCM5464 */ - rgmii_phy3: ethernet-phy@3 { - reg = <0x3>; - }; - rgmii_phy4: ethernet-phy@4 { - reg = <0x4>; - }; - rgmii_phy5: ethernet-phy@5 { - reg = <0x5>; - }; - rgmii_phy6: ethernet-phy@6 { - reg = <0x6>; - }; -}; - -/* Ethernet master port of the LS1021 */ -&enet2 { - phy-connection-type = "rgmii"; - status = "ok"; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt index bbf4a13f6d75..258bef483673 100644 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt @@ -75,7 +75,6 @@ switch@0 { }; vsc: port@6 { reg = <6>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; fixed-link { @@ -117,7 +116,6 @@ switch@2,0 { }; vsc: port@6 { reg = <6>; - label = "cpu"; ethernet = <&enet0>; phy-mode = "rgmii"; fixed-link { diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt deleted file mode 100644 index 05bd7dafce17..000000000000 --- a/Documentation/devicetree/bindings/net/emac_rockchip.txt +++ /dev/null @@ -1,52 +0,0 @@ -* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs - -Required properties: -- compatible: should be "rockchip,<name>-emac" - "rockchip,rk3036-emac": found on RK3036 SoCs - "rockchip,rk3066-emac": found on RK3066 SoCs - "rockchip,rk3188-emac": found on RK3188 SoCs -- reg: Address and length of the register set for the device -- interrupts: Should contain the EMAC interrupts -- rockchip,grf: phandle to the syscon grf used to control speed and mode - for emac. -- phy: see ethernet.txt file in the same directory. -- phy-mode: see ethernet.txt file in the same directory. - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Clock handling: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "hclk" for the host clock needed to calculate and set - polling period of EMAC and "macref" for the reference clock needed to transfer - data to and from the phy. - -Child nodes of the driver are the individual PHY devices connected to the -MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. - -Examples: - -ethernet@10204000 { - compatible = "rockchip,rk3188-emac"; - reg = <0xc0fc2000 0x3c>; - interrupts = <6>; - mac-address = [ 00 11 22 33 44 55 ]; - - clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; - clock-names = "hclk", "macref"; - - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; - - rockchip,grf = <&grf>; - - phy = <&phy0>; - phy-mode = "rmii"; - phy-supply = <&vcc_rmii>; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml new file mode 100644 index 000000000000..34fd24ff6a71 --- /dev/null +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TSN endpoint Ethernet MAC + +maintainers: + - Gerhard Engleder <gerhard@engleder-embedded.com> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: engleder,tsnep + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + items: + - const: mac + - const: txrx-1 + - const: txrx-2 + - const: txrx-3 + - const: txrx-4 + - const: txrx-5 + - const: txrx-6 + - const: txrx-7 + description: + The main interrupt for basic MAC features and the first TX/RX queue pair + is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX + queue pairs. + + dma-coherent: true + + local-mac-address: true + + mac-address: true + + nvmem-cells: true + + nvmem-cell-names: true + + phy-connection-type: + enum: + - mii + - gmii + - rgmii + - rgmii-id + + phy-mode: true + + phy-handle: true + + mdio: + type: object + $ref: mdio.yaml# + unevaluatedProperties: false + description: optional node for embedded MDIO controller + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + axi { + #address-cells = <2>; + #size-cells = <2>; + tsnep0: ethernet@a0000000 { + compatible = "engleder,tsnep"; + reg = <0x0 0xa0000000 0x0 0x10000>; + interrupts = <0 89 1>; + interrupt-parent = <&gic>; + local-mac-address = [00 00 00 00 00 00]; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + suppress-preamble; + phy0: ethernet-phy@1 { + reg = <1>; + rxc-skew-ps = <1080>; + }; + }; + }; + + tsnep1: ethernet@a0010000 { + compatible = "engleder,tsnep"; + reg = <0x0 0xa0010000 0x0 0x10000>; + interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>; + interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3"; + interrupt-parent = <&gic>; + local-mac-address = [00 00 00 00 00 00]; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + suppress-preamble; + phy1: ethernet-phy@1 { + reg = <1>; + rxc-skew-ps = <1080>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..d14d123ad7a0 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/ethernet-controller.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ethernet Controller Generic Binding +title: Ethernet Controller Common Properties maintainers: - David S. Miller <davem@davemloft.net> @@ -13,36 +13,36 @@ properties: $nodename: pattern: "^ethernet(@.*)?$" + label: + $ref: /schemas/types.yaml#/definitions/string + description: Human readable label on a port of a box. + local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 6 + maxItems: 6 max-frame-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). max-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Specifies maximum speed in Mbit/s supported by the device. @@ -51,12 +51,13 @@ properties: description: Reference to an nvmem node for the MAC address - nvmem-cells-names: + nvmem-cell-names: const: mac-address phy-connection-type: description: - Operation mode of the PHY interface + Specifies interface type between the Ethernet device and a physical + layer (PHY) device. enum: # There is not a standard bus between the MAC and the PHY, # something proprietary is being used to embed the PHY in the @@ -65,10 +66,14 @@ properties: - mii - gmii - sgmii + - psgmii - qsgmii + - qusgmii - tbi - rev-mii - rmii + - rev-rmii + - moca # RX and TX delays are added by the MAC when required - rgmii @@ -90,18 +95,33 @@ properties: - trgmii - 1000base-x - 2500base-x + - 5gbase-r - rxaui - xaui # 10GBASE-KR, XFI, SFI - 10gbase-kr - usxgmii + - 10gbase-r + - 25gbase-r phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + + pcs-handle-names: + description: + The name of each PCS in pcs-handle. + phy-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a PHY device. @@ -114,7 +134,7 @@ properties: deprecated: true rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s receive fifo in bytes. This is used for components that can have configurable receive fifo sizes, @@ -122,90 +142,148 @@ properties: such as flow control thresholds. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#/definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: - allOf: - - if: - type: array - then: - deprecated: true - minItems: 1 - maxItems: 1 - items: - items: - - minimum: 0 - maximum: 31 - description: - Emulated PHY ID, choose any but unique to the all - specified fixed-links - - - enum: [0, 1] - description: - Duplex configuration. 0 for half duplex or 1 for - full duplex - - - enum: [10, 100, 1000] - description: - Link speed in Mbits/sec. - - - enum: [0, 1] - description: - Pause configuration. 0 for no pause, 1 for pause - - - enum: [0, 1] - description: - Asymmetric pause configuration. 0 for no asymmetric - pause, 1 for asymmetric pause - - - - if: - type: object - then: - properties: - speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] - description: - Link speed. - - full-duplex: - $ref: /schemas/types.yaml#definitions/flag - description: - Indicates that full-duplex is used. When absent, half - duplex is assumed. - - asym-pause: - $ref: /schemas/types.yaml#definitions/flag - description: - Indicates that asym_pause should be enabled. - - link-gpios: - maxItems: 1 - description: - GPIO to determine if the link is up - - required: - - speed + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000, 2500, 10000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + - type: object + additionalProperties: false + properties: + speed: + description: + Link speed. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 100, 1000, 2500, 10000] + + full-duplex: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + pause: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that pause should be enabled. + + asym-pause: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed + + leds: + description: + Describes the LEDs associated by Ethernet Controller. + These LEDs are not integrated in the PHY and PHY doesn't have any + control on them. Ethernet Controller regs are used to control + these defined LEDs. + + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + +dependencies: + pcs-handle-names: [pcs-handle] + +allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id + then: + properties: + rx-internal-delay-ps: + description: + RGMII Receive Clock Delay defined in pico seconds. This is used for + controllers that have configurable RX internal delays. If this + property is present then the MAC applies the RX delay. + tx-internal-delay-ps: + description: + RGMII Transmit Clock Delay defined in pico seconds. This is used for + controllers that have configurable TX internal delays. If this + property is present then the MAC applies the TX delay. + +additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 8927941c74bb..8fb2a6ee7e5b 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/ethernet-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ethernet PHY Generic Binding +title: Ethernet PHY Common Properties maintainers: - Andrew Lunn <andrew@lunn.ch> @@ -45,6 +45,9 @@ properties: bits of a vendor specific ID. - items: - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c22 + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" - const: ethernet-phy-ieee802.3-c45 reg: @@ -74,57 +77,87 @@ properties: description: Maximum PHY supported speed in Mbits / seconds. + phy-10base-t1l-2.4vpp: + description: | + tristate, request/disable 2.4 Vpp operating mode. The values are: + 0: Disable 2.4 Vpp operating mode. + 1: Request 2.4 Vpp operating mode from link partner. + Absence of this property will leave configuration to default values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY device does not correctly release - the turn around line low at the end of a MDIO transaction. + the turn around line low at end of the control phase of the + MDIO transaction. + + clocks: + maxItems: 1 + description: + External clock connected to the PHY. If not specified it is assumed + that the PHY uses a fixed crystal or an internal oscillator. enet-phy-lane-swap: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. + enet-phy-lane-no-swap: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates that PHY will disable swap of the + TX/RX lanes. This property allows the PHY to work correctly after + e.g. wrong bootstrap configuration caused by issues in PCB + layout design. + eee-broken-100tx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000t: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gt: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000kx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkx4: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkr: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. + pses: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + Specifies a reference to a node representing a Power Sourcing Equipment. + phy-is-integrated: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that the PHY is integrated into the same physical package as the Ethernet MAC. If needed, muxers @@ -154,15 +187,60 @@ properties: this property is missing the delay will be skipped. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. + rx-internal-delay-ps: + description: | + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable RX internal delays. If this property is + present then the PHY applies the RX delay. + + tx-internal-delay-ps: + description: | + RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable TX internal delays. If this property is + present then the PHY applies the TX delay. + + leds: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + required: - reg +additionalProperties: true + examples: - | + #include <dt-bindings/leds/common.h> + ethernet { #address-cells = <1>; #size-cells = <0>; @@ -178,5 +256,17 @@ examples: reset-gpios = <&gpio1 4 1>; reset-assert-us = <1000>; reset-deassert-us = <2000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml new file mode 100644 index 000000000000..d5cf7e40e3c3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Ethernet Switch Port + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vladimir Oltean <olteanv@gmail.com> + +description: + An Ethernet switch port is a component of a switch that manages one MAC, and + can pass Ethernet frames. + +$ref: ethernet-controller.yaml# + +properties: + reg: + description: Port number + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml new file mode 100644 index 000000000000..b3b7e1a1b127 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Ethernet Switch + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vladimir Oltean <olteanv@gmail.com> + +description: + Ethernet switches are multi-port Ethernet controllers. Each port has + its own number and is represented as its own Ethernet controller. + The minimum required functionality is to pass packets to software. + They may or may not be able to forward packets automonously between + ports. + +select: false + +allOf: + # This condition is here to satisfy the case where certain device + # nodes have to preserve non-standard names because of + # backward-compatibility with boot loaders inspecting certain + # node names. + - if: + properties: + compatible: + contains: + enum: + - marvell,turris-mox-mv88e6085 + - marvell,turris-mox-mv88e6190 + then: + properties: + $nodename: + pattern: "switch[0-3]@[0-3]+$" + else: + properties: + $nodename: + pattern: "^(ethernet-)?switch(@.*)?$" + +patternProperties: + "^(ethernet-)?ports$": + type: object + unevaluatedProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^(ethernet-)?port@[0-9a-f]+$": + type: object + description: Ethernet switch ports + + required: + - "#address-cells" + - "#size-cells" + +oneOf: + - required: + - ports + - required: + - ethernet-ports + +additionalProperties: true + +$defs: + ethernet-ports: + description: An ethernet switch without any extra port properties + $ref: '#' + + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9a-f]+$": + description: Ethernet switch ports + $ref: ethernet-switch-port.yaml# + unevaluatedProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml new file mode 100644 index 000000000000..9bcbacb6640d --- /dev/null +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTGMAC100 gigabit ethernet controller + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Po-Yu Chuang <ratbert@faraday-tech.com> + +properties: + compatible: + oneOf: + - const: faraday,ftgmac100 + - items: + - enum: + - aspeed,ast2400-mac + - aspeed,ast2500-mac + - aspeed,ast2600-mac + - const: faraday,ftgmac100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: MAC IP clock + - description: RMII RCLK gate for AST2500/2600 + + clock-names: + minItems: 1 + items: + - const: MACCLK + - const: RCLK + + phy-mode: + enum: + - rgmii + - rmii + + phy-handle: true + + use-ncsi: + description: + Use the NC-SI stack instead of an MDIO PHY. Currently assumes + rmii (100bT) but kept as a separate property in case NC-SI grows support + for a gigabit link. + type: boolean + + no-hw-checksum: + description: + Used to disable HW checksum support. Here for backward + compatibility as the driver now should have correct defaults based on + the SoC. + type: boolean + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@1e660000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + use-ncsi; + }; + + ethernet@1e680000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <2>; + + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml new file mode 100644 index 000000000000..8948a11c994e --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -0,0 +1,267 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Fast Ethernet Controller (FEC) + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Wei Fang <wei.fang@nxp.com> + - NXP Linux Team <linux-imx@nxp.com> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - fsl,imx25-fec + - fsl,imx27-fec + - fsl,imx28-fec + - fsl,imx6q-fec + - fsl,mvf600-fec + - fsl,s32v234-fec + - items: + - enum: + - fsl,imx53-fec + - fsl,imx6sl-fec + - const: fsl,imx25-fec + - items: + - enum: + - fsl,imx35-fec + - fsl,imx51-fec + - const: fsl,imx27-fec + - items: + - enum: + - fsl,imx6ul-fec + - fsl,imx6sx-fec + - const: fsl,imx6q-fec + - items: + - enum: + - fsl,imx7d-fec + - const: fsl,imx6sx-fec + - items: + - const: fsl,imx8mq-fec + - const: fsl,imx6sx-fec + - items: + - enum: + - fsl,imx8mm-fec + - fsl,imx8mn-fec + - fsl,imx8mp-fec + - fsl,imx93-fec + - const: fsl,imx8mq-fec + - const: fsl,imx6sx-fec + - items: + - const: fsl,imx8qm-fec + - const: fsl,imx6sx-fec + - items: + - enum: + - fsl,imx8dxl-fec + - fsl,imx8qxp-fec + - const: fsl,imx8qm-fec + - const: fsl,imx6sx-fec + - items: + - enum: + - fsl,imx8ulp-fec + - const: fsl,imx6ul-fec + - const: fsl,imx6q-fec + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + + interrupt-names: + oneOf: + - items: + - const: int0 + - items: + - const: int0 + - const: pps + - items: + - const: int0 + - const: int1 + - const: int2 + - items: + - const: int0 + - const: int1 + - const: int2 + - const: pps + + clocks: + minItems: 2 + maxItems: 5 + description: + The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing. + The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock. + The "ptp"(option), for IEEE1588 timer clock that requires the clock. + The "enet_clk_ref"(option), for MAC transmit/receiver reference clock like + RGMII TXC clock or RMII reference clock. It depends on board design, + the clock is required if RGMII TXC and RMII reference clock source from + SOC internal PLL. + The "enet_out"(option), output clock for external device, like supply clock + for PHY. The clock is required if PHY clock source from SOC. + The "enet_2x_txclk"(option), for RGMII sampling clock which fixed at 250Mhz. + The clock is required if SoC RGMII enable clock delay. + + clock-names: + minItems: 2 + maxItems: 5 + items: + enum: + - ipg + - ahb + - ptp + - enet_clk_ref + - enet_out + - enet_2x_txclk + + phy-mode: true + + phy-handle: true + + fixed-link: true + + local-mac-address: true + + mac-address: true + + nvmem-cells: true + + nvmem-cell-names: true + + tx-internal-delay-ps: + enum: [0, 2000] + + rx-internal-delay-ps: + enum: [0, 2000] + + phy-supply: + description: + Regulator that powers the Ethernet PHY. + + power-domains: + maxItems: 1 + + fsl,num-tx-queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The property is valid for enet-avb IP, which supports hw multi queues. + Should specify the tx queue number, otherwise set tx queue number to 1. + enum: [1, 2, 3] + + fsl,num-rx-queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The property is valid for enet-avb IP, which supports hw multi queues. + Should specify the rx queue number, otherwise set rx queue number to 1. + enum: [1, 2, 3] + + fsl,magic-packet: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, indicates that the hardware supports waking up via magic packet. + + fsl,err006687-workaround-present: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present indicates that the system has the hardware workaround for + ERR006687 applied and does not need a software workaround. + + fsl,stop-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to general purpose register node + - description: the gpr register offset for ENET stop request + - description: the gpr bit offset for ENET stop request + description: + Register bits of stop mode control, the format is <&gpr req_gpr req_bit>. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: + Specifies the mdio bus in the FEC, used as a container for phy nodes. + + # Deprecated optional properties: + # To avoid these, create a phy node according to ethernet-phy.yaml in the same + # directory, and point the FEC's "phy-handle" property to it. Then use + # the phy's reset binding, again described by ethernet-phy.yaml. + + phy-reset-gpios: + deprecated: true + description: + Should specify the gpio for phy reset. + + phy-reset-duration: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Reset duration in milliseconds. Should present only if property + "phy-reset-gpios" is available. Missing the property will have the + duration be 1 millisecond. Numbers greater than 1000 are invalid + and 1 millisecond will be used instead. + + phy-reset-active-high: + type: boolean + deprecated: true + description: + If present then the reset sequence using the GPIO specified in the + "phy-reset-gpios" property is reversed (H=reset state, L=operation state). + + phy-reset-post-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay + milliseconds will be observed after the phy-reset-gpios has been toggled. + Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms. + Other delays are invalid. + +required: + - compatible + - reg + - interrupts + +# FIXME: We had better set additionalProperties to false to avoid invalid or at +# least undocumented properties. However, PHY may have a deprecated option to +# place PHY OF properties in the MAC node, such as Micrel PHY, and we can find +# these boards which is based on i.MX6QDL. +unevaluatedProperties: false + +examples: + - | + ethernet@83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 0>; + phy-supply = <®_fec_supply>; + }; + + ethernet@83fed000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fed000 0x4000>; + interrupts = <87>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 0>; + phy-supply = <®_fec_supply>; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml new file mode 100644 index 000000000000..c80c880a9dab --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FMan MAC + +maintainers: + - Madalin Bucur <madalin.bucur@nxp.com> + +description: | + Each FMan has several MACs, each implementing an Ethernet interface. Earlier + versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for + 10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller + (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate + Ethernet Media Access Controller (mEMAC) to handle all speeds. + +properties: + compatible: + enum: + - fsl,fman-dtsec + - fsl,fman-xgec + - fsl,fman-memac + + cell-index: + maximum: 64 + description: | + FManV2: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16] XGEC 8 + FM_EPI[16+n] dTSECn n-1 + FM_NPI[11+n] dTSECn n-1 + n = 1,..,5 + + FManV3: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16+n] mEMACn n-1 + FM_EPI[25] mEMAC10 9 + + FM_NPI[11+n] mEMACn n-1 + FM_NPI[10] mEMAC10 9 + FM_NPI[11] mEMAC9 8 + n = 1,..8 + + FM_EPI and FM_NPI are located in the FMan memory map. + + 2. SoC registers: + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_DEVDISR2[7] 1 XGEC 8 + DCFG_DEVDISR2[7+n] 1 dTSECn n-1 + DCFG_DEVDISR2[15] 2 XGEC 8 + DCFG_DEVDISR2[15+n] 2 dTSECn n-1 + n = 1,..5 + + - T1040, T2080, T4240, B4860: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 + DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 + n = 1,..6,9,10 + + EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + + reg: + maxItems: 1 + + fsl,fman-ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: | + An array of two references: the first is the FMan RX port and the second + is the TX port used by this MAC. + + ptp-timer: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the IEEE1588 timer + + phys: + description: A reference to the SerDes lane(s) + maxItems: 1 + + phy-names: + items: + - const: serdes + + pcsphy-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 3 + deprecated: true + description: See pcs-handle. + + pcs-handle: + minItems: 1 + maxItems: 3 + description: | + A reference to the various PCSs (typically found on the SerDes). If + pcs-handle-names is absent, and phy-connection-type is "xgmii", then the first + reference will be assumed to be for "xfi". Otherwise, if pcs-handle-names is + absent, then the first reference will be assumed to be for "sgmii". + + pcs-handle-names: + minItems: 1 + maxItems: 3 + items: + enum: + - sgmii + - qsgmii + - xfi + description: The type of each PCS in pcsphy-handle. + + tbi-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the (TBI-based) PCS + +required: + - compatible + - cell-index + - reg + - fsl,fman-ports + - ptp-timer + +dependencies: + pcs-handle-names: + - pcs-handle + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: fsl,fman-dtsec + then: + required: + - tbi-handle + +unevaluatedProperties: false + +examples: + - | + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; + ptp-timer = <&ptp_timer>; + tbi-handle = <&tbi0>; + }; + - | + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + phys = <&serdes1 1>; + phy-names = "serdes"; + }; +... diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml new file mode 100644 index 000000000000..a1b71b35319e --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPAA2 MAC + +maintainers: + - Ioana Ciornei <ioana.ciornei@nxp.com> + +description: + This binding represents the DPAA2 MAC objects found on the fsl-mc bus and + located under the 'dpmacs' node for the fsl-mc bus DTS node. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: fsl,qoriq-mc-dpmac + + reg: + maxItems: 1 + description: The DPMAC number + + phy-handle: true + + phy-connection-type: true + + phy-mode: true + + pcs-handle: + maxItems: 1 + description: + A reference to a node representing a PCS PHY device found on + the internal MDIO bus. + + managed: true + +required: + - reg + +additionalProperties: false + +examples: + - | + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt index b7034ccbc1bd..9b9a3f197e2d 100644 --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt @@ -102,3 +102,18 @@ Example: full-duplex; }; }; + +* Integrated Endpoint Register Block bindings + +Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register +Block, which preconfigures the FIFO limits for the ENETC ports. This is a node +with the following properties: + +- reg : Specifies the address in the SoC memory space. +- compatible : Must be "fsl,ls1028a-enetc-ierb". + +Example: + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt deleted file mode 100644 index 5b88fae0307d..000000000000 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ /dev/null @@ -1,89 +0,0 @@ -* Freescale Fast Ethernet Controller (FEC) - -Required properties: -- compatible : Should be "fsl,<soc>-fec" -- reg : Address and length of the register set for the device -- interrupts : Should contain fec interrupt -- phy-mode : See ethernet.txt file in the same directory - -Optional properties: -- phy-supply : regulator that powers the Ethernet PHY. -- phy-handle : phandle to the PHY device connected to this device. -- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. - Use instead of phy-handle. -- fsl,num-tx-queues : The property is valid for enet-avb IP, which supports - hw multi queues. Should specify the tx queue number, otherwise set tx queue - number to 1. -- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports - hw multi queues. Should specify the rx queue number, otherwise set rx queue - number to 1. -- fsl,magic-packet : If present, indicates that the hardware supports waking - up via magic packet. -- fsl,err006687-workaround-present: If present indicates that the system has - the hardware workaround for ERR006687 applied and does not need a software - workaround. - -interrupt-names: names of the interrupts listed in interrupts property in - the same order. The defaults if not specified are - __Number of interrupts__ __Default__ - 1 "int0" - 2 "int0", "pps" - 3 "int0", "int1", "int2" - 4 "int0", "int1", "int2", "pps" - The order may be changed as long as they correspond to the interrupts - property. Currently, only i.mx7 uses "int1" and "int2". They correspond to - tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. - For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse - per second interrupt associated with 1588 precision time protocol(PTP). - -Optional subnodes: -- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes - according to phy.txt in the same directory - -Deprecated optional properties: - To avoid these, create a phy node according to phy.txt in the same - directory, and point the fec's "phy-handle" property to it. Then use - the phy's reset binding, again described by phy.txt. -- phy-reset-gpios : Should specify the gpio for phy reset -- phy-reset-duration : Reset duration in milliseconds. Should present - only if property "phy-reset-gpios" is available. Missing the property - will have the duration be 1 millisecond. Numbers greater than 1000 are - invalid and 1 millisecond will be used instead. -- phy-reset-active-high : If present then the reset sequence using the GPIO - specified in the "phy-reset-gpios" property is reversed (H=reset state, - L=operation state). -- phy-reset-post-delay : Post reset delay in milliseconds. If present then - a delay of phy-reset-post-delay milliseconds will be observed after the - phy-reset-gpios has been toggled. Can be omitted thus no delay is - observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. - -Example: - -ethernet@83fec000 { - compatible = "fsl,imx51-fec", "fsl,imx27-fec"; - reg = <0x83fec000 0x4000>; - interrupts = <87>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ - local-mac-address = [00 04 9F 01 1B B9]; - phy-supply = <®_fec_supply>; -}; - -Example with phy specified: - -ethernet@83fec000 { - compatible = "fsl,imx51-fec", "fsl,imx27-fec"; - reg = <0x83fec000 0x4000>; - interrupts = <87>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ - local-mac-address = [00 04 9F 01 1B B9]; - phy-supply = <®_fec_supply>; - phy-handle = <ðphy>; - mdio { - ethphy: ethernet-phy@6 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <6>; - max-speed = <100>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 299c0dcd67db..bda4b41af074 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -110,6 +110,13 @@ PROPERTIES Usage: required Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt +- fsl,erratum-a050385 + Usage: optional + Value type: boolean + Definition: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + ============================================================================= FMan MURAM Node @@ -225,133 +232,7 @@ port@81000 { ============================================================================= FMan dTSEC/XGEC/mEMAC Node -DESCRIPTION - -mEMAC/dTSEC/XGEC are the Ethernet network interfaces - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-dtsec" for dTSEC MAC - - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac" for mEMAC MAC - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the MAC id. - - The cell-index value may be used by the FMan or the SoC, to - identify the MAC unit in the FMan (or SoC) memory map. - In the tables below there's a description of the cell-index - use, there are two tables, one describes the use of cell-index - by the FMan, the second describes the use by the SoC: - - 1. FMan Registers - - FManV2: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16] XGEC 8 - FM_EPI[16+n] dTSECn n-1 - FM_NPI[11+n] dTSECn n-1 - n = 1,..,5 - - FManV3: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16+n] mEMACn n-1 - FM_EPI[25] mEMAC10 9 - - FM_NPI[11+n] mEMACn n-1 - FM_NPI[10] mEMAC10 9 - FM_NPI[11] mEMAC9 8 - n = 1,..8 - - FM_EPI and FM_NPI are located in the FMan memory map. - - 2. SoC registers: - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_DEVDISR2[7] 1 XGEC 8 - DCFG_DEVDISR2[7+n] 1 dTSECn n-1 - DCFG_DEVDISR2[15] 2 XGEC 8 - DCFG_DEVDISR2[15+n] 2 dTSECn n-1 - n = 1,..5 - - - T1040, T2080, T4240, B4860: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 - DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 - n = 1,..6,9,10 - - EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- fsl,fman-ports - Usage: required - Value type: <prop-encoded-array> - Definition: An array of two phandles - the first references is - the FMan RX port and the second is the TX port used by this - MAC. - -- ptp-timer - Usage required - Value type: <phandle> - Definition: A phandle for 1EEE1588 timer. - -- pcsphy-handle - Usage required for "fsl,fman-memac" MACs - Value type: <phandle> - Definition: A phandle for pcsphy. - -- tbi-handle - Usage required for "fsl,fman-dtsec" MACs - Value type: <phandle> - Definition: A phandle for tbiphy. - -EXAMPLE - -fman1_tx28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -fman1_rx8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -ptp-timer: ptp_timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; -}; - -ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; - ptp-timer = <&ptp-timer>; - tbi-handle = <&tbi0>; -}; +Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml ============================================================================ FMan IEEE 1588 Node @@ -381,14 +262,24 @@ PROPERTIES Value type: <prop-encoded-array> Definition: A standard property. -- bus-frequency +- clocks + Usage: optional + Value type: <phandle> + Definition: A reference to the input clock of the controller + from which the MDC frequency is derived. + +- clock-frequency Usage: optional Value type: <u32> - Definition: Specifies the external MDIO bus clock speed to - be used, if different from the standard 2.5 MHz. - This may be due to the standard speed being unsupported (e.g. - due to a hardware problem), or to advertise that all relevant - components in the system support a faster speed. + Definition: Specifies the external MDC frequency, in Hertz, to + be used. Requires that the input clock is specified in the + "clocks" property. See also: mdio.yaml. + +- suppress-preamble + Usage: optional + Value type: <boolean> + Definition: Disable generation of preamble bits. See also: + mdio.yaml. - interrupts Usage: required for external MDIO @@ -403,12 +294,35 @@ PROPERTIES The settings and programming routines for internal/external MDIO are different. Must be included for internal MDIO. +- fsl,erratum-a009885 + Usage: optional + Value type: <boolean> + Definition: Indicates the presence of the A009885 + erratum describing that the contents of MDIO_DATA may + become corrupt unless it is read within 16 MDC cycles + of MDIO_CFG[BSY] being cleared, when performing an + MDIO read operation. + +- fsl,erratum-a011043 + Usage: optional + Value type: <boolean> + Definition: Indicates the presence of the A011043 erratum + describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely + set when reading internal PCS registers. MDIO reads to + internal PCS registers may result in having the + MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and + read data (MDIO_DATA[MDIO_DATA]) is correct. + Software may get false read error when reading internal + PCS registers through MDIO. As a workaround, all internal + MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. + For internal PHY device on internal mdio bus, a PHY node should be created. See the definition of the PHY node in booting-without-of.txt for an example of how to define a PHY (Internal PHY has no interrupt line). - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. -- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY, - PCS PHY addr must be '0'. +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. + The PCS PHY address should correspond to the value of the appropriate + MDEV_PORT. EXAMPLE diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt deleted file mode 100644 index f878c1103463..000000000000 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Faraday Technology FTGMAC100 gigabit ethernet controller - -Required properties: -- compatible: "faraday,ftgmac100" - - Must also contain one of these if used as part of an Aspeed AST2400 - or 2500 family SoC as they have some subtle tweaks to the - implementation: - - - "aspeed,ast2400-mac" - - "aspeed,ast2500-mac" - - "aspeed,ast2600-mac" - -- reg: Address and length of the register set for the device -- interrupts: Should contain ethernet controller interrupt - -Optional properties: -- phy-mode: See ethernet.txt file in the same directory. If the property is - absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for - aspeed parts. Other (unknown) parts will accept any value. -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes - rmii (100bT) but kept as a separate property in case NC-SI grows support - for a gigabit link. -- no-hw-checksum: Used to disable HW checksum support. Here for backward - compatibility as the driver now should have correct defaults based on - the SoC. -- clocks: In accordance with the generic clock bindings. Must describe the MAC - IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The - required MAC clock must be the first cell. -- clock-names: - - - "MACCLK": The MAC IP clock - - "RCLK": Clock gate for the RMII RCLK - -Example: - - mac0: ethernet@1e660000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e660000 0x180>; - interrupts = <2>; - use-ncsi; - }; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt deleted file mode 100644 index f7da3d73ca1b..000000000000 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ /dev/null @@ -1,97 +0,0 @@ -Device tree bindings for Ethernet chip connected to TI GPMC - -Besides being used to interface with external memory devices, the -General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices -such as ethernet controllers to processors using the TI GPMC as a data bus. - -Ethernet controllers connected to TI GPMC are represented as child nodes of -the GPMC controller with an "ethernet" name. - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For the properties relevant to the ethernet controller connected to the GPMC -refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt - -Child nodes need to specify the GPMC bus address width using the "bank-width" -property but is possible that an ethernet controller also has a property to -specify the I/O registers address width. Even when the GPMC has a maximum 16-bit -address width, it supports devices with 32-bit word registers. -For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an -OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". - -Required properties: -- bank-width: Address width of the device in bytes. GPMC supports 8-bit - and 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns: Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- reg: Chip-select, base address (relative to chip-select) - and size of the memory mapped for the device. - Note that base address will be typically 0 as this - is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <5 0 0x2c000000 0x1000000>; - - ethernet@5,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - interrupt-parent = <&gpio6>; - interrupts = <16>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; - }; -}; diff --git a/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml new file mode 100644 index 000000000000..11ffc306dd54 --- /dev/null +++ b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IDT 79rc3243x Ethernet controller + +description: Ethernet controller integrated into IDT 79RC3243x family SoCs + +maintainers: + - Thomas Bogendoerfer <tsbogend@alpha.franken.de> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: idt,3243x-emac + + reg: + maxItems: 3 + + reg-names: + items: + - const: emac + - const: dma_rx + - const: dma_tx + + interrupts: + items: + - description: RX interrupt + - description: TX interrupt + + interrupt-names: + items: + - const: rx + - const: tx + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mdioclk + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + + ethernet@60000 { + compatible = "idt,3243x-emac"; + + reg = <0x60000 0x10000>, + <0x40000 0x14>, + <0x40014 0x14>; + reg-names = "emac", "dma_rx", "dma_tx"; + + interrupt-parent = <&rcpic3>; + interrupts = <0>, <1>; + interrupt-names = "rx", "tx"; + + clocks = <&iclk>; + clock-names = "mdioclk"; + }; diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml new file mode 100644 index 000000000000..bdea101c2f75 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ingenic,mac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAC in Ingenic SoCs + +maintainers: + - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> + +description: + The Ethernet Media Access Controller in Ingenic SoCs. + +properties: + compatible: + enum: + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle + description: An extra syscon register that control ethernet interface and timing delay + + rx-clk-delay-ps: + description: RGMII receive clock delay defined in pico seconds + + tx-clk-delay-ps: + description: RGMII transmit clock delay defined in pico seconds + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - mode-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,x1000-cgu.h> + + mac: ethernet@134b0000 { + compatible = "ingenic,x1000-mac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1000_CLK_MAC>; + clock-names = "stmmaceth"; + + mode-reg = <&mac_phy_ctrl>; + }; +... diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml new file mode 100644 index 000000000000..42a0bc94312c --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel DWMAC glue layer + +maintainers: + - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> + +select: + properties: + compatible: + contains: + enum: + - intel,keembay-dwmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - intel,keembay-dwmac + - const: snps,dwmac-4.10a + + clocks: + items: + - description: GMAC main clock + - description: PTP reference clock + - description: Tx clock + + clock-names: + items: + - const: stmmaceth + - const: ptp_ref + - const: tx_clk + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: +# FIXME: Remove defines and include the correct header file +# once it is available in mainline. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define MOVISOC_KMB_PSS_GBE + #define MOVISOC_KMB_PSS_AUX_GBE_PTP + #define MOVISOC_KMB_PSS_AUX_GBE_TX + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0x0>; + snps,rd_osr_lmt = <0x2>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@3a000000 { + compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + reg = <0x3a000000 0x8000>; + snps,perfect-filter-entries = <128>; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + clock-names = "stmmaceth", "ptp_ref", "tx_clk"; + clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>, + <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>, + <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>; + snps,pbl = <0x4>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,tso; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml new file mode 100644 index 000000000000..f92730b1d2fa --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP46x PTP Timer (TSYNC) + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP46x PTP timer is known in the manual as IEEE1588 Hardware + Assist and Time Synchronization Hardware Assist TSYNC provides a PTP + timer. It exists in the Intel IXP45x and IXP46x XScale SoCs. + +properties: + compatible: + const: intel,ixp46x-ptp-timer + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt to trigger master mode snapshot from the + PRP timer, usually a GPIO interrupt. + - description: Interrupt to trigger slave mode snapshot from the + PRP timer, usually a GPIO interrupt. + + interrupt-names: + items: + - const: master + - const: slave + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ptp-timer@c8010000 { + compatible = "intel,ixp46x-ptp-timer"; + reg = <0xc8010000 0x1000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "master", "slave"; + }; diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml new file mode 100644 index 000000000000..4fdc5328826c --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx ethernet + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network + Processing Engine) and the IXP4xx Queue Manager to process + the ethernet frames. It can optionally contain an MDIO bus to + talk to PHYs. + +properties: + compatible: + const: intel,ixp4xx-ethernet + + reg: + maxItems: 1 + description: Ethernet MMIO address range + + queue-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the RX queue node + - description: RX queue instance to use + description: phandle to the RX queue on the NPE + + queue-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the TX READY queue node + - description: TX READY queue instance to use + description: phandle to the TX READY queue on the NPE + + phy-mode: true + + phy-handle: true + + intel,npe-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the NPE this ethernet instance is using + - description: the NPE instance to use + description: phandle to the NPE this ethernet instance is using + and the instance to use in the second cell + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: optional node for embedded MDIO controller + +required: + - compatible + - reg + - queue-rx + - queue-txready + - intel,npe-handle + +additionalProperties: false + +examples: + - | + npe: npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; + + ethernet@c8009000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc8009000 0x1000>; + queue-rx = <&qmgr 4>; + queue-txready = <&qmgr 21>; + intel,npe-handle = <&npe 1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + + ethernet@c800c000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800c000 0x1000>; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + intel,npe-handle = <&npe 2>; + phy-mode = "rgmii"; + phy-handle = <&phy2>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml new file mode 100644 index 000000000000..7a405e9b37b2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS) + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network + Processing Engine) and the IXP4xx Queue Manager to process + V.35 Wideband Modem (WAN) links. + +properties: + compatible: + const: intel,ixp4xx-hss + + reg: + maxItems: 1 + description: The HSS instance + + intel,npe-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to the NPE this HSS instance is using + - description: the NPE instance number + description: phandle to the NPE this HSS instance is using + and the instance to use in the second cell + + intel,queue-chl-rxtrig: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the RX trigger queue on the NPE + - description: the queue instance number + description: phandle to the RX trigger queue on the NPE + + intel,queue-chl-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the TX ready queue on the NPE + - description: the queue instance number + description: phandle to the TX ready queue on the NPE + + intel,queue-pkt-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number + description: phandle to the packet RX queue on the NPE + + intel,queue-pkt-tx: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 4 + items: + items: + - description: phandle to the TX queue on the NPE + - description: the queue instance number + description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE + + intel,queue-pkt-rxfree: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 4 + items: + items: + - description: phandle to the RXFREE queue on the NPE + - description: the queue instance number + description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and + RXFREE3 queues on the NPE + + intel,queue-pkt-txdone: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the TXDONE queue on the NPE + - description: the queue instance number + description: phandle to the packet TXDONE queue on the NPE + + cts-gpios: + maxItems: 1 + description: Clear To Send (CTS) GPIO line + + rts-gpios: + maxItems: 1 + description: Ready To Send (RTS) GPIO line + + dcd-gpios: + maxItems: 1 + description: Data Carrier Detect (DCD) GPIO line + + dtr-gpios: + maxItems: 1 + description: Data Terminal Ready (DTR) GPIO line + + clk-internal-gpios: + maxItems: 1 + description: Clock internal GPIO line, driving this high will make the HSS + use internal clocking as opposed to external clocking + +required: + - compatible + - reg + - intel,npe-handle + - intel,queue-chl-rxtrig + - intel,queue-chl-txready + - intel,queue-pkt-rx + - intel,queue-pkt-tx + - intel,queue-pkt-rxfree + - intel,queue-pkt-txdone + - cts-gpios + - rts-gpios + - dcd-gpios + - dtr-gpios + - clk-internal-gpios + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml new file mode 100644 index 000000000000..3ce9f9a16baf --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq Xway ETOP Ethernet driver + +maintainers: + - John Crispin <john@phrozen.org> + +properties: + $nodename: + pattern: "^ethernet@[0-9a-f]+$" + + compatible: + const: lantiq,etop-xway + + reg: + maxItems: 1 + + interrupts: + items: + - description: TX interrupt + - description: RX interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + lantiq,tx-burst-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TX programmable burst length. + enum: [2, 4, 8] + + lantiq,rx-burst-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RX programmable burst length. + enum: [2, 4, 8] + + phy-mode: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - lantiq,tx-burst-length + - lantiq,rx-burst-length + - phy-mode + +additionalProperties: false + +examples: + - | + ethernet@e180000 { + compatible = "lantiq,etop-xway"; + reg = <0xe180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73>, <78>; + interrupt-names = "tx", "rx"; + lantiq,tx-burst-length = <8>; + lantiq,rx-burst-length = <8>; + phy-mode = "rmii"; + }; diff --git a/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml new file mode 100644 index 000000000000..7da8370e2468 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq PEF2256 + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and + line interface component designed to fulfill all required interfacing between + an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. + +properties: + compatible: + items: + - const: lantiq,pef2256 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master Clock + - description: System Clock Receive + - description: System Clock Transmit + + clock-names: + items: + - const: mclk + - const: sclkr + - const: sclkx + + interrupts: + maxItems: 1 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + patternProperties: + '-pins$': + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ] + + function: + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS, + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT, + GPI, GPOH, GPOL ] + + required: + - pins + - function + + lantiq,data-rate-bps: + enum: [2048000, 4096000, 8192000, 16384000] + default: 2048000 + description: + Data rate (bit per seconds) on the system highway. + + lantiq,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + lantiq,channel-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit + time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000 + bit/s, the data (all 32 8-bit) present in the frame are interleave with + unused time-slots. The lantiq,channel-phase property allows to set the + correct alignment of the interleave mechanism. + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and + lantiq,channel-phase = 2, the interleave schema with unused time-slots + (nu) and used time-slots (XX) for TSi is + nu nu XX nu nu nu XX nu nu nu XX nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the + interleave schema is + nu XX nu nu nu XX nu nu nu XX nu nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and + lantiq,channel-phase = 1, the interleave schema is + nu XX nu XX nu XX + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + +patternProperties: + '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$': + type: object + $ref: /schemas/sound/dai-common.yaml + unevaluatedProperties: false + description: + Codec provided by the pef2256. This codec allows to use some of the PCM + system highway time-slots as audio channels to transport audio data over + the E1/T1/J1 lines. + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the sound card node for + sub-nodes that involve the codec. The codec uses 8-bit time-slots. + 'dai-tdm-tdm-slot-with' must be set to 8. + The tx and rx masks define the pef2256 time-slots assigned to the codec. + + properties: + compatible: + const: lantiq,pef2256-codec + + '#sound-dai-cells': + const: 0 + + required: + - compatible + - '#sound-dai-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pef2256: framer@2000000 { + compatible = "lantiq,pef2256"; + reg = <0x2000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&intc>; + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>; + clock-names = "mclk", "sclkr", "sclkx"; + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + lantiq,data-rate-bps = <4096000>; + + pinctrl { + pef2256_rpa_sypr: rpa-pins { + pins = "RPA"; + function = "SYPR"; + }; + pef2256_xpa_sypx: xpa-pins { + pins = "XPA"; + function = "SYPX"; + }; + }; + + pef2256_codec0: codec-0 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_0"; + }; + + pef2256_codec1: codec-1 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */ + reg = <0>; + cpu { + sound-dai = <&cpu_dai1>; + }; + codec { + sound-dai = <&pef2256_codec0>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 1, 2, 3, 4 */ + dai-tdm-slot-tx-mask = <0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 1 1 1 1>; + }; + }; + simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */ + reg = <1>; + cpu { + sound-dai = <&cpu_dai2>; + }; + codec { + sound-dai = <&pef2256_codec1>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 5, 6, 7, 8 */ + dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt deleted file mode 100644 index 5ff5e68bbbb6..000000000000 --- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt +++ /dev/null @@ -1,21 +0,0 @@ -Lantiq xRX200 GSWIP PMAC Ethernet driver -================================== - -Required properties: - -- compatible : "lantiq,xrx200-net" for the PMAC of the embedded - : GSWIP in the xXR200 -- reg : memory range of the PMAC core inside of the GSWIP core -- interrupts : TX and RX DMA interrupts. Use interrupt-names "tx" for - : the TX interrupt and "rx" for the RX interrupt. - -Example: - -ethernet@e10b308 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = <0xe10b308 0xcf8>; - interrupts = <73>, <72>; - interrupt-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml new file mode 100644 index 000000000000..5bc1a21ca579 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq xRX200 GSWIP PMAC Ethernet driver + +maintainers: + - Hauke Mehrtens <hauke@hauke-m.de> + +properties: + $nodename: + pattern: "^ethernet@[0-9a-f]+$" + + compatible: + const: lantiq,xrx200-net + + reg: + maxItems: 1 + + interrupts: + items: + - description: TX interrupt + - description: RX interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + ethernet@e10b308 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = <0xe10b308 0xcf8>; + interrupt-parent = <&icu0>; + interrupts = <73>, <72>; + interrupt-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml new file mode 100644 index 000000000000..ebf4e360f8dd --- /dev/null +++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/litex,liteeth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LiteX LiteETH ethernet device + +maintainers: + - Joel Stanley <joel@jms.id.au> + +description: | + LiteETH is a small footprint and configurable Ethernet core for FPGA based + system on chips. + + The hardware source is Open Source and can be found on at + https://github.com/enjoy-digital/liteeth/. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: litex,liteeth + + reg: + items: + - description: MAC registers + - description: MDIO registers + - description: Packet buffer + + reg-names: + items: + - const: mac + - const: mdio + - const: buffer + + interrupts: + maxItems: 1 + + litex,rx-slots: + description: Number of slots in the receive buffer + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + default: 2 + + litex,tx-slots: + description: Number of slots in the transmit buffer + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + default: 2 + + litex,slot-size: + description: Size in bytes of a slot in the tx/rx buffer + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x800 + default: 0x800 + + mac-address: true + local-mac-address: true + phy-handle: true + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + mac: ethernet@8020000 { + compatible = "litex,liteeth"; + reg = <0x8021000 0x100>, + <0x8020800 0x100>, + <0x8030000 0x2000>; + reg-names = "mac", "mdio", "buffer"; + litex,rx-slots = <2>; + litex,tx-slots = <2>; + litex,slot-size = <0x800>; + interrupts = <0x11 0x1>; + phy-handle = <ð_phy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + }; + }; + }; +... + +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml : diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml new file mode 100644 index 000000000000..c4f3224bad38 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1B Gigabit Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1B Gigabit Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - Dual 10/100/1000Mbps GMAC controllers + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - RX Checksum Offload + - TX Checksum insertion + - MII interface + - RGMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1b-gmac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1b-gmac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rgmii-id + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gmac0: ethernet@1fe10000 { + compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml new file mode 100644 index 000000000000..99001b940b83 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1C Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1C Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - 10/100Mbps + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - IEEE 802.1Q VLAN tag detection for reception frames + - MII interface + - RMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1c-emac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1c-emac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rmii + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + emac: ethernet@1fe10000 { + compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@13 { + reg = <0x13>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt deleted file mode 100644 index 0b61a90f1592..000000000000 --- a/Documentation/devicetree/bindings/net/macb.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Cadence MACB/GEM Ethernet controller - -Required properties: -- compatible: Should be "cdns,[<chip>-]{macb|gem}" - Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. - Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. - Use "cdns,np4-macb" for NP4 SoC devices. - Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on - the Cadence GEM, or the generic form: "cdns,gem". - Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. - Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs. - Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. - Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. - Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. - Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. - Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC. - Or the generic form: "cdns,emac". -- reg: Address and length of the register set for the device - For "sifive,fu540-c000-gem", second range is required to specify the - address and length of the registers for GEMGXL Management block. -- interrupts: Should contain macb interrupt -- phy-mode: See ethernet.txt file in the same directory. -- clock-names: Tuple listing input clock names. - Required elements: 'pclk', 'hclk' - Optional elements: 'tx_clk' - Optional elements: 'rx_clk' applies to cdns,zynqmp-gem - Optional elements: 'tsu_clk' -- clocks: Phandles to input clocks. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Optional properties for PHY child node: -- reset-gpios : Should specify the gpio for phy reset -- magic-packet : If present, indicates that the hardware supports waking - up via magic packet. -- phy-handle : see ethernet.txt file in the same directory - -Examples: - - macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb"; - reg = <0xfffc4000 0x4000>; - interrupts = <21>; - phy-mode = "rmii"; - local-mac-address = [3a 0e 03 04 05 06]; - clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; - ethernet-phy@1 { - reg = <0x1>; - reset-gpios = <&pioE 6 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml new file mode 100644 index 000000000000..9854fab4c4db --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Aquantia Ethernet PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually + work. + + This can be done and is implemented by OEM in 3 different way: + - Attached SPI flash directly to the PHY with the firmware. The PHY + will self load the firmware in the presence of this configuration. + - Read from a dedicated partition on system NAND declared in an + NVMEM cell, and loaded to the PHY using its mailbox interface. + - Manually provided firmware loaded from a file in the filesystem. + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id03a1.b445 + - ethernet-phy-id03a1.b460 + - ethernet-phy-id03a1.b4a2 + - ethernet-phy-id03a1.b4d0 + - ethernet-phy-id03a1.b4e0 + - ethernet-phy-id03a1.b5c2 + - ethernet-phy-id03a1.b4b0 + - ethernet-phy-id03a1.b662 + - ethernet-phy-id03a1.b712 + - ethernet-phy-id31c3.1c12 + required: + - compatible + +properties: + reg: + maxItems: 1 + + firmware-name: + description: specify the name of PHY firmware to load + + nvmem-cells: + description: phandle to the firmware nvmem cell + maxItems: 1 + + nvmem-cell-names: + const: firmware + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <0>; + firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld"; + }; + + ethernet-phy@1 { + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <1>; + nvmem-cells = <&aqr_fw>; + nvmem-cell-names = "firmware"; + }; + }; + + flash { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + partition@650000 { + compatible = "nvmem-cells"; + label = "0:ethphyfw"; + reg = <0x650000 0x80000>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + aqr_fw: aqr_fw@0 { + reg = <0x0 0x5f42a>; + }; + }; + + /* ... */ + + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml new file mode 100644 index 000000000000..8a14c919e3f7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,dfx-server.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Prestera DFX server + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +select: + properties: + compatible: + contains: + const: marvell,dfx-server + required: + - compatible + +properties: + compatible: + items: + - const: marvell,dfx-server + - const: simple-bus + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + - ranges + +# The DFX server may expose clocks described as subnodes +additionalProperties: + type: object + +examples: + - | + + #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + bus@0 { + reg = <0 0>; + #address-cells = <2>; + #size-cells = <1>; + + dfx-bus@ac000000 { + compatible = "marvell,dfx-server", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + reg = <MBUS_ID(0x08, 0x00) 0 0x100000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml new file mode 100644 index 000000000000..ab838c1ffeed --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,mvusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell USB to MDIO Controller + +maintainers: + - Tobias Waldekranz <tobias@waldekranz.com> + +description: |+ + This controller is mounted on development boards for Marvell's Link Street + family of Ethernet switches. It allows you to configure the switch's registers + using the standard MDIO interface. + + Since the device is connected over USB, there is no strict requirement of + having a device tree representation of the device. But in order to use it with + the mv88e6xxx driver, you need a device tree node in which to place the switch + definition. + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: usb1286,1fa4 + reg: + maxItems: 1 + description: The USB port number on the host controller + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + /* USB host controller */ + usb { + #address-cells = <1>; + #size-cells = <0>; + + mdio@1 { + compatible = "usb1286,1fa4"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6190"; + reg = <0x0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Port definitions */ + }; + + mdio { + /* PHY definitions */ + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml new file mode 100644 index 000000000000..73429855d584 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MDIO Ethernet Controller interface + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: | + The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0, + Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that + provides an interface with the MDIO bus. Additionally, Armada 7k and Armada + 8k has a second unit which provides an interface with the xMDIO bus. This + driver handles these interfaces. + +properties: + compatible: + enum: + - marvell,orion-mdio + - marvell,xmdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml# + +unevaluatedProperties: false + +examples: + - | + mdio@d0072004 { + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x84>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <30>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml new file mode 100644 index 000000000000..4eadafc43d4f --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml @@ -0,0 +1,305 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,pp2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller + +maintainers: + - Marcin Wojtas <mw@semihalf.com> + - Russell King <linux@armlinux.org> + +description: | + Marvell Armada 375 Ethernet Controller (PPv2.1) + Marvell Armada 7K/8K Ethernet Controller (PPv2.2) + Marvell CN913X Ethernet Controller (PPv2.3) + +properties: + compatible: + enum: + - marvell,armada-375-pp2 + - marvell,armada-7k-pp22 + + reg: + minItems: 3 + maxItems: 4 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + minItems: 2 + items: + - description: main controller clock + - description: GOP clock + - description: MG clock + - description: MG Core clock + - description: AXI clock + + clock-names: + minItems: 2 + items: + - const: pp_clk + - const: gop_clk + - const: mg_clk + - const: mg_core_clk + - const: axi_clk + + dma-coherent: true + + marvell,system-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the system controller. + +patternProperties: + '^(ethernet-)?port@[0-2]$': + type: object + description: subnode for each ethernet port. + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + description: ID of the port from the MAC point of view. + maximum: 2 + + interrupts: + minItems: 1 + maxItems: 10 + description: interrupt(s) for the port + + interrupt-names: + minItems: 1 + items: + - const: hif0 + - const: hif1 + - const: hif2 + - const: hif3 + - const: hif4 + - const: hif5 + - const: hif6 + - const: hif7 + - const: hif8 + - const: link + + description: > + if more than a single interrupt for is given, must be the + name associated to the interrupts listed. Valid names are: + "hifX", with X in [0..8], and "link". The names "tx-cpu0", + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported + for backward compatibility but shouldn't be used for new + additions. + + phys: + minItems: 1 + maxItems: 2 + description: > + Generic PHY, providing SerDes connectivity. For most modes, + one lane is sufficient, but some (e.g. RXAUI) may require two. + + phy-mode: + enum: + - gmii + - sgmii + - rgmii-id + - 1000base-x + - 2500base-x + - 5gbase-r + - rxaui + - 10gbase-r + + port-id: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: > + ID of the port from the MAC point of view. + Legacy binding for backward compatibility. + + marvell,loopback: + $ref: /schemas/types.yaml#/definitions/flag + description: port is loopback mode. + + gop-port-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + only for marvell,armada-7k-pp22, ID of the port from the + GOP (Group Of Ports) point of view. This ID is used to index the + per-port registers in the second register area. + + required: + - reg + - interrupts + - phy-mode + - port-id + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + const: marvell,armada-7k-pp22 + then: + properties: + reg: + items: + - description: Packet Processor registers + - description: Networking interfaces registers + - description: CM3 address space used for TX Flow Control + + clocks: + minItems: 5 + + clock-names: + minItems: 5 + + patternProperties: + '^(ethernet-)?port@[0-2]$': + required: + - gop-port-id + + required: + - marvell,system-controller + else: + properties: + reg: + items: + - description: Packet Processor registers + - description: LMS registers + - description: Register area per eth0 + - description: Register area per eth1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + patternProperties: + '^(ethernet-)?port@[0-1]$': + properties: + reg: + maximum: 1 + + gop-port-id: false + +additionalProperties: false + +examples: + - | + // For Armada 375 variant + #include <dt-bindings/interrupt-controller/mvebu-icu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@f0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,armada-375-pp2"; + reg = <0xf0000 0xa000>, + <0xc0000 0x3060>, + <0xc4000 0x100>, + <0xc5000 0x100>; + clocks = <&gateclk 3>, <&gateclk 19>; + clock-names = "pp_clk", "gop_clk"; + + ethernet-port@0 { + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0>; + port-id = <0>; /* For backward compatibility. */ + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet-port@1 { + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + reg = <1>; + port-id = <1>; /* For backward compatibility. */ + phy = <&phy3>; + phy-mode = "gmii"; + }; + }; + + - | + // For Armada 7k/8k and Cn913x variants + #include <dt-bindings/interrupt-controller/mvebu-icu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; + clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>, + <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>; + clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&cp0_syscon0>; + + ethernet-port@0 { + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + reg = <0>; + port-id = <0>; /* For backward compatibility. */ + gop-port-id = <0>; + }; + + ethernet-port@1 { + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; + phy-mode = "rgmii-id"; + reg = <1>; + port-id = <1>; /* For backward compatibility. */ + gop-port-id = <2>; + }; + + ethernet-port@2 { + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + phys = <&cp0_comphy5 2>; + sfp = <&sfp_eth3>; + reg = <2>; + port-id = <2>; /* For backward compatibility. */ + gop-port-id = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt deleted file mode 100644 index 83370ebf5b89..000000000000 --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt +++ /dev/null @@ -1,47 +0,0 @@ -Marvell Prestera Switch Chip bindings -------------------------------------- - -Required properties: -- compatible: must be "marvell,prestera" and one of the following - "marvell,prestera-98dx3236", - "marvell,prestera-98dx3336", - "marvell,prestera-98dx4251", -- reg: address and length of the register set for the device. -- interrupts: interrupt for the device - -Optional properties: -- dfx: phandle reference to the "DFX Server" node - -Example: - -switch { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; - - packet-processor@0 { - compatible = "marvell,prestera-98dx3236", "marvell,prestera"; - reg = <0 0x4000000>; - interrupts = <33>, <34>, <35>; - dfx = <&dfx>; - }; -}; - -DFX Server bindings -------------------- - -Required properties: -- compatible: must be "marvell,dfx-server", "simple-bus" -- ranges: describes the address mapping of a memory-mapped bus. -- reg: address and length of the register set for the device. - -Example: - -dfx-server { - compatible = "marvell,dfx-server", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; - reg = <MBUS_ID(0x08, 0x00) 0 0x100000>; -}; diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.yaml b/Documentation/devicetree/bindings/net/marvell,prestera.yaml new file mode 100644 index 000000000000..5ea8b73663a5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,prestera.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,prestera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Prestera switch family + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - marvell,prestera-98dx3236 + - marvell,prestera-98dx3336 + - marvell,prestera-98dx4251 + - const: marvell,prestera + - enum: + - pci11ab,c804 + - pci11ab,c80c + - pci11ab,cc1e + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + dfx: + description: Reference to the DFX Server bus node. + $ref: /schemas/types.yaml#/definitions/phandle + + nvmem-cells: true + + nvmem-cell-names: true + +if: + properties: + compatible: + contains: + const: marvell,prestera + +# Memory mapped AlleyCat3 family +then: + properties: + nvmem-cells: false + nvmem-cell-names: false + required: + - interrupts + +# PCI Aldrin family +else: + properties: + interrupts: false + dfx: false + +required: + - compatible + - reg + +# Ports can also be described +additionalProperties: + type: object + +examples: + - | + packet-processor@0 { + compatible = "marvell,prestera-98dx3236", "marvell,prestera"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; + + - | + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x0>; + reg = <0x0 0x0 0x0 0x0 0x0 0x0>; + device_type = "pci"; + + switch@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci11ab,c80c"; + nvmem-cells = <&mac_address 0>; + nvmem-cell-names = "mac-address"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index 691f886cfc4a..2bf31572b08d 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -5,6 +5,7 @@ Required properties: "marvell,armada-370-neta" "marvell,armada-xp-neta" "marvell,armada-3700-neta" + "marvell,armada-ac5-neta" - reg: address and length of the register set for the device. - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt b/Documentation/devicetree/bindings/net/marvell-bluetooth.txt deleted file mode 100644 index 0e2842296032..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt +++ /dev/null @@ -1,25 +0,0 @@ -Marvell Bluetooth Chips ------------------------ - -This documents the binding structure and common properties for serial -attached Marvell Bluetooth devices. The following chips are included in -this binding: - -* Marvell 88W8897 Bluetooth devices - -Required properties: - - compatible: should be: - "mrvl,88w8897" - -Optional properties: -None so far - -Example: - -&serial0 { - compatible = "ns16550a"; - ... - bluetooth { - compatible = "mrvl,88w8897"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml new file mode 100644 index 000000000000..188a42ca6ceb --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Bluetooth chips + +description: | + This documents the binding structure and common properties for serial + attached Marvell Bluetooth devices. + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + enum: + - mrvl,88w8897 + - mrvl,88w8997 + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + const: mrvl,88w8997 + then: + properties: + max-speed: true + else: + properties: + max-speed: false + +additionalProperties: false + +examples: + - | + serial { + bluetooth { + compatible = "mrvl,88w8897"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt deleted file mode 100644 index 3f3cfc1d8d4d..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Marvell MDIO Ethernet Controller interface - -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an -identical unit that provides an interface with the MDIO bus. -Additionally, Armada 7k and Armada 8k has a second unit which -provides an interface with the xMDIO bus. This driver handles -these interfaces. - -Required properties: -- compatible: "marvell,orion-mdio" or "marvell,xmdio" -- reg: address and length of the MDIO registers. When an interrupt is - not present, the length is the size of the SMI register (4 bytes) - otherwise it must be 0x84 bytes to cover the interrupt control - registers. - -Optional properties: -- interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to four required clocks for the MDIO instance - -The child nodes of the MDIO driver are the individual PHY devices -connected to this MDIO bus. They must have a "reg" property given the -PHY address on the MDIO bus. - -Example at the SoC level without an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; -}; - -Example with an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x84>; - interrupts = <30>; -}; - -And at the board level: - -mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -} diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt deleted file mode 100644 index b78397669320..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ /dev/null @@ -1,139 +0,0 @@ -* Marvell Armada 375 Ethernet Controller (PPv2.1) - Marvell Armada 7K/8K Ethernet Controller (PPv2.2) - -Required properties: - -- compatible: should be one of: - "marvell,armada-375-pp2" - "marvell,armada-7k-pp2" -- reg: addresses and length of the register sets for the device. - For "marvell,armada-375-pp2", must contain the following register - sets: - - common controller registers - - LMS registers - - one register area per Ethernet port - For "marvell,armada-7k-pp2", must contain the following register - sets: - - packet processor registers - - networking interfaces registers - -- clocks: pointers to the reference clocks for this device, consequently: - - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - - MG clock (only for armada-7k-pp2) - - MG Core clock (only for armada-7k-pp2) - - AXI clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk", - "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2). - -The ethernet ports are represented by subnodes. At least one port is -required. - -Required properties (port): - -- interrupts: interrupt(s) for the port -- port-id: ID of the port from the MAC point of view -- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the - GOP (Group Of Ports) point of view. This ID is used to index the - per-port registers in the second register area. -- phy-mode: See ethernet.txt file in the same directory - -Optional properties (port): - -- marvell,loopback: port is loopback mode -- phy: a phandle to a phy node defining the PHY address (as the reg - property, a single integer). -- interrupt-names: if more than a single interrupt for is given, must be the - name associated to the interrupts listed. Valid names are: - "hifX", with X in [0..8], and "link". The names "tx-cpu0", - "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported - for backward compatibility but shouldn't be used for new - additions. -- marvell,system-controller: a phandle to the system controller. - -Example for marvell,armada-375-pp2: - -ethernet@f0000 { - compatible = "marvell,armada-375-pp2"; - reg = <0xf0000 0xa000>, - <0xc0000 0x3060>, - <0xc4000 0x100>, - <0xc5000 0x100>; - clocks = <&gateclk 3>, <&gateclk 19>; - clock-names = "pp_clk", "gop_clk"; - - eth0: eth0@c4000 { - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - port-id = <0>; - phy = <&phy0>; - phy-mode = "gmii"; - }; - - eth1: eth1@c5000 { - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - port-id = <1>; - phy = <&phy3>; - phy-mode = "gmii"; - }; -}; - -Example for marvell,armada-7k-pp2: - -cpm_ethernet: ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, - <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>; - clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk"; - - eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", - "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - }; - - eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", - "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - }; - - eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", - "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml new file mode 100644 index 000000000000..8a3713abd1ca --- /dev/null +++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/maxlinear,gpy2xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MaxLinear GPY2xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Michael Walle <michael@walle.cc> + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + maxlinear,use-broken-interrupts: + description: | + Interrupts are broken on some GPY2xx PHYs in that they keep the + interrupt line asserted for a random amount of time even after the + interrupt status register is cleared. Thus it is blocking the + interrupt line which is usually bad for shared lines. By default, + interrupts are disabled for this PHY and polling mode is used. If one + can live with the consequences, this property can be used to enable + interrupt handling. + + Affected PHYs (as far as known) are GPY215B and GPY215C. + type: boolean + +dependencies: + maxlinear,use-broken-interrupts: [ interrupts ] + +unevaluatedProperties: false + +examples: + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&intc 0>; + maxlinear,use-broken-interrupts; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml new file mode 100644 index 000000000000..8438af53c5c3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MCTP I2C transport + +maintainers: + - Matt Johnston <matt@codeconstruct.com.au> + +description: | + An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller. + MCTP I2C is specified by DMTF DSP0237. + + An mctp-i2c-controller must be attached to an I2C adapter which supports + slave functionality. I2C busses (either directly or as subordinate mux + busses) are attached to the mctp-i2c-controller with a 'mctp-controller' + property on each used bus. Each mctp-controller I2C bus will be presented + to the host system as a separate MCTP I2C instance. + +properties: + compatible: + const: mctp-i2c-controller + + reg: + minimum: 0x40000000 + maximum: 0x4000007f + description: | + 7 bit I2C address of the local endpoint. + I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + // Basic case of a single I2C bus + #include <dt-bindings/i2c/i2c.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + + mctp@30 { + compatible = "mctp-i2c-controller"; + reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>; + }; + }; + + - | + // Mux topology with multiple MCTP-handling busses under + // a single mctp-i2c-controller. + // i2c1 and i2c6 can have MCTP devices, i2c5 does not. + #include <dt-bindings/i2c/i2c.h> + + i2c1: i2c { + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + + mctp@50 { + compatible = "mctp-i2c-controller"; + reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + + i2c5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@33 { + reg = <0x33>; + }; + }; + + i2c6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mctp-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt deleted file mode 100644 index 8dbcf8295c6c..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt +++ /dev/null @@ -1,26 +0,0 @@ -MDIO on GPIOs - -Currently defined compatibles: -- virtual,gpio-mdio - -MDC and MDIO lines connected to GPIO controllers are listed in the -gpios property as described in section VIII.1 in the following order: - -MDC, MDIO. - -Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - mdio-gpio0 = &mdio0; -}; - -mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; -}; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml new file mode 100644 index 000000000000..eb4171a1940e --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO on GPIOs + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Heiner Kallweit <hkallweit1@gmail.com> + - Russell King <linux@armlinux.org.uk> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + enum: + - virtual,mdio-gpio + - microchip,mdio-smi0 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpios: + minItems: 2 + items: + - description: MDC + - description: MDIO + - description: MDO + +# Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" +# node. +additionalProperties: + type: object + +examples: + - | + aliases { + mdio-gpio0 = &mdio0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qe_pio_a 11>, + <&qe_pio_c 6>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt deleted file mode 100644 index 694987d3c17a..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt +++ /dev/null @@ -1,119 +0,0 @@ -Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. - -This is a special case of a MDIO bus multiplexer. One or more GPIO -lines are used to control which child bus is connected. - -Required properties in addition to the generic multiplexer properties: - -- compatible : mdio-mux-gpio. -- gpios : GPIO specifiers for each GPIO line. One or more must be specified. - - -Example : - - /* The parent MDIO bus. */ - smi1: mdio@1180000001900 { - compatible = "cavium,octeon-3860-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0x00001900 0x0 0x40>; - }; - - /* - An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a - pair of GPIO lines. Child busses 2 and 3 populated with 4 - PHYs each. - */ - mdio-mux { - compatible = "mdio-mux-gpio"; - gpios = <&gpio1 3 0>, <&gpio1 4 0>; - mdio-parent-bus = <&smi1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy11: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy12: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy13: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy14: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - }; - - mdio@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - phy21: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy22: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy23: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy24: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml new file mode 100644 index 000000000000..71c25c4580ea --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + This is a special case of a MDIO bus multiplexer. One or more GPIO + lines are used to control which child bus is connected. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: mdio-mux-gpio + + gpios: + description: + List of GPIOs used to control the multiplexer, least significant bit first. + minItems: 1 + maxItems: 32 + +required: + - compatible + - gpios + +unevaluatedProperties: false + +examples: + - | + /* + An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a + pair of GPIO lines. Child busses 2 and 3 populated with 4 + PHYs each. + */ + mdio-mux { + compatible = "mdio-mux-gpio"; + gpios = <&gpio1 3 0>, <&gpio1 4 0>; + mdio-parent-bus = <&smi1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@2 { + reg = <2>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@3 { + reg = <3>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@4 { + reg = <4>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + }; + + mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@2 { + reg = <2>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@3 { + reg = <3>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@4 { + reg = <4>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt deleted file mode 100644 index 3a96cbed9294..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt +++ /dev/null @@ -1,48 +0,0 @@ -Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family. - -This is a special case of a MDIO bus multiplexer. It allows to choose between -the internal mdio bus leading to the embedded 10/100 PHY or the external -MDIO bus. - -Required properties in addition to the generic multiplexer properties: -- compatible : amlogic,g12a-mdio-mux -- reg: physical address and length of the multiplexer/glue registers -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "pclk" : peripheral clock. - * "clkin0" : platform crytal - * "clkin1" : SoC 50MHz MPLL - -Example : - -mdio_mux: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_5OM>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet-phy@8 { - compatible = "ethernet-phy-id0180.3301", - "ethernet-phy-ieee802.3-c22"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <8>; - max-speed = <100>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt deleted file mode 100644 index 065e8bdb957d..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt +++ /dev/null @@ -1,75 +0,0 @@ -Properties for an MDIO bus multiplexer controlled by a memory-mapped device - -This is a special case of a MDIO bus multiplexer. A memory-mapped device, -like an FPGA, is used to control which child bus is connected. The mdio-mux -node must be a child of the memory-mapped device. The driver currently only -supports devices with 8, 16 or 32-bit registers. - -Required properties in addition to the generic multiplexer properties: - -- compatible : string, must contain "mdio-mux-mmioreg" - -- reg : integer, contains the offset of the register that controls the bus - multiplexer. The size field in the 'reg' property is the size of - register, and must therefore be 1, 2, or 4. - -- mux-mask : integer, contains an eight-bit mask that specifies which - bits in the register control the actual bus multiplexer. The - 'reg' property of each child mdio-mux node must be constrained by - this mask. - -Example: - -The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. -For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. -A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on -BRDCFG1 that control the actual mux. - - /* The FPGA node */ - fpga: board-control@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - ranges = <0 3 0 0x30>; - - mdio-mux-emi2 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&xmdio0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <9 1>; // BRDCFG1 - mux-mask = <0x6>; // EMI2 - - emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; - }; - }; - - emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot2: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - }; - }; - }; - - /* The parent MDIO bus. */ - xmdio0: mdio@f1000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <100 1 0 0>; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml new file mode 100644 index 000000000000..cf86bb0b0b62 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + This is a special case of a MDIO bus multiplexer. A memory-mapped device, + like an FPGA, is used to control which child bus is connected. The mdio-mux + node must be a child of the memory-mapped device. The driver currently only + supports devices with 8, 16 or 32-bit registers. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + items: + - const: mdio-mux-mmioreg + - const: mdio-mux + + reg: + description: Contains the offset of the register that controls the bus + multiplexer. The size field in the 'reg' property is the size of register, + and must therefore be 1, 2, or 4. + maxItems: 1 + + mux-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Contains an eight-bit mask that specifies which bits in the + register control the actual bus multiplexer. The 'reg' property of each + child mdio-mux node must be constrained by this mask. + +required: + - compatible + - reg + - mux-mask + +unevaluatedProperties: false + +examples: + - | + mdio-mux@9 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x6>; // EMI2 + + mdio@0 { // Slot 1 XAUI (FM2) + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + mdio@2 { // Slot 2 XAUI (FM1) + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt deleted file mode 100644 index 534e38058fe0..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt +++ /dev/null @@ -1,82 +0,0 @@ -Properties for an MDIO bus multiplexer consumer device - -This is a special case of MDIO mux when MDIO mux is defined as a consumer -of a mux producer device. The mux producer can be of any type like mmio mux -producer, gpio mux producer or generic register based mux producer. - -Required properties in addition to the MDIO Bus multiplexer properties: - -- compatible : should be "mmio-mux-multiplexer" -- mux-controls : mux controller node to use for operating the mux -- mdio-parent-bus : phandle to the parent MDIO bus. - -each child node of mdio bus multiplexer consumer device represent a mdio -bus. - -for more information please refer -Documentation/devicetree/bindings/mux/mux-controller.txt -and Documentation/devicetree/bindings/net/mdio-mux.txt - -Example: -In below example the Mux producer and consumer are separate nodes. - -&i2c0 { - fpga@66 { // fpga connected to i2c - compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", - "simple-mfd"; - reg = <0x66>; - - mux: mux-controller { // Mux Producer - compatible = "reg-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ - <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ - }; - }; -}; - -mdio-mux-1 { // Mux consumer - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 0>; - mdio-parent-bus = <&emdio1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@8 { - reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; - -mdio-mux-2 { // Mux consumer - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 1>; - mdio-parent-bus = <&emdio2>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml new file mode 100644 index 000000000000..282987074ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer consumer device + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + This is a special case of MDIO mux when MDIO mux is defined as a consumer + of a mux producer device. The mux producer can be of any type like mmio mux + producer, gpio mux producer or generic register based mux producer. + + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: mdio-mux-multiplexer + + mux-controls: + maxItems: 1 + +required: + - compatible + - mux-controls + +unevaluatedProperties: false + +examples: + - | + mux: mux-controller { // Mux Producer + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + + mdio-mux-1 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt deleted file mode 100644 index f58571f36570..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux.txt +++ /dev/null @@ -1,129 +0,0 @@ -Common MDIO bus multiplexer/switch properties. - -An MDIO bus multiplexer/switch will have several child busses that are -numbered uniquely in a device dependent manner. The nodes for an MDIO -bus multiplexer/switch will have one child node for each child bus. - -Required properties: -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- mdio-parent-bus : phandle to the parent MDIO bus. - -- Other properties specific to the multiplexer/switch hardware. - -Required properties for child nodes: -- #address-cells = <1>; -- #size-cells = <0>; -- reg : The sub-bus number. - - -Example : - - /* The parent MDIO bus. */ - smi1: mdio@1180000001900 { - compatible = "cavium,octeon-3860-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0x00001900 0x0 0x40>; - }; - - /* - An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a - pair of GPIO lines. Child busses 2 and 3 populated with 4 - PHYs each. - */ - mdio-mux { - compatible = "mdio-mux-gpio"; - gpios = <&gpio1 3 0>, <&gpio1 4 0>; - mdio-parent-bus = <&smi1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy11: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy12: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy13: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy14: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - }; - - mdio@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - phy21: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy22: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy23: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy24: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml new file mode 100644 index 000000000000..4321c87de86f --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common MDIO bus multiplexer/switch properties. + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + An MDIO bus multiplexer/switch will have several child busses that are + numbered uniquely in a device dependent manner. The nodes for an MDIO + bus multiplexer/switch will have one child node for each child bus. + +properties: + mdio-parent-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the MDIO bus that this multiplexer's master-side port is + connected to. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^mdio@[0-9a-f]+$': + $ref: mdio.yaml# + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 5d08d2ffd4eb..a266ade918ca 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/mdio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MDIO Bus Generic Binding +title: MDIO Bus Common Properties maintainers: - Andrew Lunn <andrew@lunn.ch> @@ -31,16 +31,35 @@ properties: maxItems: 1 description: The phandle and specifier for the GPIO that controls the RESET - lines of all PHYs on that MDIO bus. + lines of all devices on that MDIO bus. reset-delay-us: description: - RESET pulse width in microseconds. It applies to all PHY devices - and must therefore be appropriately determined based on all PHY - requirements (maximum value of all per-PHY RESET pulse widths). + RESET pulse width in microseconds. It applies to all MDIO devices + and must therefore be appropriately determined based on all devices + requirements (maximum value of all per-device RESET pulse widths). + + reset-post-delay-us: + description: + Delay after reset deassert in microseconds. It applies to all MDIO + devices and it's determined by how fast all devices are ready for + communication. This delay happens just before e.g. Ethernet PHY + type ID auto detection. + + clock-frequency: + description: + Desired MDIO bus clock frequency in Hz. Values greater than IEEE 802.3 + defined 2.5MHz should only be used when all devices on the bus support + the given clock speed. + + suppress-preamble: + description: + The 32 bit preamble should be suppressed. In order for this to + work, all devices on the bus must support suppressed preamble. + type: boolean patternProperties: - "^ethernet-phy@[0-9a-f]+$": + '@[0-9a-f]+$': type: object properties: @@ -48,15 +67,38 @@ patternProperties: minimum: 0 maximum: 31 description: - The ID number for the PHY. + The ID number for the device. + + broken-turn-around: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates the MDIO device does not correctly release + the turn around line low at end of the control phase of the + MDIO transaction. + + reset-gpios: + maxItems: 1 + description: + The GPIO phandle and specifier for the MDIO reset signal. + + reset-assert-us: + description: + Delay after the reset was asserted in microseconds. If this + property is missing the delay will be skipped. + + reset-deassert-us: + description: + Delay after the reset was deasserted in microseconds. If + this property is missing the delay will be skipped. required: - reg +additionalProperties: true + examples: - | davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt deleted file mode 100644 index 358fed2fab43..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Mediatek Gigabit Switch -======================= - -The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621). - -Required properties: -- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the gigabit switches interrupt -- resets: Should contain the gigabit switches resets -- reset-names: Should contain the reset names "gsw" - -Example: - -gsw@10110000 { - compatible = "ralink,mt7620-gsw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "gsw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml new file mode 100644 index 000000000000..e74502a0afe8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -0,0 +1,579 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs + have dual GMAC ports. + +properties: + compatible: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + - mediatek,mt7621-eth + - mediatek,mt7622-eth + - mediatek,mt7629-eth + - mediatek,mt7981-eth + - mediatek,mt7986-eth + - mediatek,mt7988-eth + - ralink,rt5350-eth + + reg: + maxItems: 1 + + clocks: true + clock-names: true + + interrupts: + minItems: 1 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: fe + - const: gmac + - const: ppe + + mediatek,ethsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the port setup. + + cci-control-port: true + + mediatek,hifsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek hifsys controller used to provide various clocks + and reset to the system. + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + description: + A list of phandle to the syscon node that handles the SGMII setup which is required for + those SoCs equipped with SGMII. + + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + + mediatek,wed-pcie: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek wed-pcie controller. + + dma-coherent: true + + mdio-bus: + $ref: mdio.yaml# + unevaluatedProperties: false + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp1 + - const: gp2 + + mediatek,infracfg: false + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt7621-eth + then: + properties: + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ethif + - const: fe + + mediatek,infracfg: false + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: + const: mediatek,mt7622-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 1 + maxItems: 1 + + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: + const: mediatek,mt7629-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 17 + maxItems: 17 + + clock-names: + items: + - const: ethif + - const: sgmiitop + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: fe + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: + const: mediatek,mt7981-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu0 + - const: sgmii_ck + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu1 + - const: wocpu0 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 34 + maxItems: 34 + + clock-names: + items: + - const: crypto + - const: fe + - const: gp2 + - const: gp1 + - const: gp3 + - const: ethwarp_wocpu2 + - const: ethwarp_wocpu1 + - const: ethwarp_wocpu0 + - const: esw + - const: netsys0 + - const: netsys1 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: top_usxgmii0_sel + - const: top_usxgmii1_sel + - const: top_sgm0_sel + - const: top_sgm1_sel + - const: top_xfi_phy0_xtal_sel + - const: top_xfi_phy1_xtal_sel + - const: top_eth_gmii_sel + - const: top_eth_refck_50m_sel + - const: top_eth_sys_200m_sel + - const: top_eth_sys_sel + - const: top_eth_xgmii_sel + - const: top_eth_mii_sel + - const: top_netsys_sel + - const: top_netsys_500m_sel + - const: top_netsys_pao_2x_sel + - const: top_netsys_sync_250m_sel + - const: top_netsys_ppefb_250m_sel + - const: top_netsys_warp_sel + - const: wocpu1 + - const: wocpu0 + - const: xgp1 + - const: xgp2 + - const: xgp3 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + +patternProperties: + "^mac@[0-1]$": + type: object + unevaluatedProperties: false + allOf: + - $ref: ethernet-controller.yaml# + description: + Ethernet MAC node + properties: + compatible: + const: mediatek,eth-mac + + reg: + maxItems: 1 + + required: + - reg + - compatible + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,ethsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/power/mt7622-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ethernet: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; + + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + reg = <0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + reg = <1>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@15100000 { + #define CLK_ETH_FE_EN 0 + #define CLK_ETH_WOCPU1_EN 3 + #define CLK_ETH_WOCPU0_EN 4 + #define CLK_TOP_NETSYS_SEL 43 + #define CLK_TOP_NETSYS_500M_SEL 44 + #define CLK_TOP_NETSYS_2X_SEL 46 + #define CLK_TOP_SGM_325M_SEL 47 + #define CLK_APMIXED_NET2PLL 1 + #define CLK_APMIXED_SGMPLL 3 + + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII_TX250M_EN>, + <&sgmiisys0 CLK_SGMII_RX250M_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX250M_EN>, + <&sgmiisys1 CLK_SGMII_RX250M_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@0 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reset-gpios = <&pio 6 1>; + reset-deassert-us = <20000>; + reg = <5>; + }; + + phy6: ethernet-phy@1 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reg = <6>; + }; + }; + + mac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + reg = <0>; + }; + + mac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml new file mode 100644 index 000000000000..2e889f9a563e --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek STAR Ethernet MAC Controller + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: + This Ethernet MAC is used on the MT8* family of SoCs from MediaTek. + It's compliant with 802.3 standards and supports half- and full-duplex + modes with flow-control as well as CRC offloading and VLAN tags. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt8516-eth + - mediatek,mt8518-eth + - mediatek,mt8175-eth + - mediatek,mt8365-eth + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + additionalItems: false + items: + - const: core + - const: reg + - const: trans + + mediatek,pericfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the device containing the PERICFG register range. This is used + to control the MII mode. + + mediatek,rmii-rxc: + type: boolean + description: + If present, indicates that the RMII reference clock, which is from external + PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin. + + mediatek,rxc-inverse: + type: boolean + description: + If present, indicates that clock on RXC pad will be inversed. + + mediatek,txc-inverse: + type: boolean + description: + If present, indicates that clock on TXC pad will be inversed. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,pericfg + - phy-handle + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8516-clk.h> + + ethernet: ethernet@11180000 { + compatible = "mediatek,mt8516-eth"; + reg = <0x11180000 0x1000>; + mediatek,pericfg = <&pericfg>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RG_ETH>, + <&topckgen CLK_TOP_66M_ETH>, + <&topckgen CLK_TOP_133M_ETH>; + clock-names = "core", "reg", "trans"; + phy-handle = <ð_phy>; + phy-mode = "rmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 112011c51d5e..9ef5bacda8c1 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices This device is a serial attached device to BTIF device and thus it must be a child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.txt. +device can be known via Documentation/devicetree/bindings/serial/8250.yaml. Required properties: @@ -42,7 +42,7 @@ child node of the serial node with UART. Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Required properties: diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt deleted file mode 100644 index 8a08621a5b54..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt +++ /dev/null @@ -1,78 +0,0 @@ -MediaTek DWMAC glue layer controller - -This file documents platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the MAC interrupts -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: The name of the clock listed in the clocks property. These are - "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC -- mac-address: See ethernet.txt in the same directory -- phy-mode: See ethernet.txt in the same directory -- mediatek,pericfg: A phandle to the syscon node that control ethernet - interface and timing delay. - -Optional properties: -- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0. - It should be defined for RGMII/MII interface. -- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0. - It should be defined for RGMII/MII/RMII interface. -Both delay properties need to be a multiple of 170 for RGMII interface, -or will round down. Range 0~31*170. -Both delay properties need to be a multiple of 550 for MII/RMII interface, -or will round down. Range 0~31*550. - -- mediatek,rmii-rxc: boolean property, if present indicates that the RMII - reference clock, which is from external PHYs, is connected to RXC pin - on MT2712 SoC. - Otherwise, is connected to TXC pin. -- mediatek,txc-inverse: boolean property, if present indicates that - 1. tx clock will be inversed in MII/RGMII case, - 2. tx clock inside MAC will be inversed relative to reference clock - which is from external PHYs in RMII case, and it rarely happen. -- mediatek,rxc-inverse: boolean property, if present indicates that - 1. rx clock will be inversed in MII/RGMII case. - 2. reference clock will be inversed when arrived at MAC in RMII case. -- assigned-clocks: mac_main and ptp_ref clocks -- assigned-clock-parents: parent clocks of the assigned clocks - -Example: - eth: ethernet@1101c000 { - compatible = "mediatek,mt2712-gmac"; - reg = <0 0x1101c000 0 0x1300>; - interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "macirq"; - phy-mode ="rgmii"; - mac-address = [00 55 7b b5 7d f7]; - clock-names = "axi", - "apb", - "mac_main", - "ptp_ref", - "ptp_top"; - clocks = <&pericfg CLK_PERI_GMAC>, - <&pericfg CLK_PERI_GMAC_PCLK>, - <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>; - assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, - <&topckgen CLK_TOP_APLL1_D3>; - mediatek,pericfg = <&pericfg>; - mediatek,tx-delay-ps = <1530>; - mediatek,rx-delay-ps = <1530>; - mediatek,rmii-rxc; - mediatek,txc-inverse; - mediatek,rxc-inverse; - snps,txpbl = <32>; - snps,rxpbl = <32>; - snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - }; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml new file mode 100644 index 000000000000..ed9d845f6008 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DWMAC glue layer controller + +maintainers: + - Biao Huang <biao.huang@mediatek.com> + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - mediatek,mt2712-gmac + - mediatek,mt8188-gmac + - mediatek,mt8195-gmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2712-gmac + - const: snps,dwmac-4.20a + - items: + - enum: + - mediatek,mt8195-gmac + - const: snps,dwmac-5.10a + - items: + - enum: + - mediatek,mt8188-gmac + - const: mediatek,mt8195-gmac + - const: snps,dwmac-5.10a + + clocks: + minItems: 5 + items: + - description: AXI clock + - description: APB clock + - description: MAC Main clock + - description: PTP clock + - description: RMII reference clock provided by MAC + - description: MAC clock gate + + clock-names: + minItems: 5 + items: + - const: axi + - const: apb + - const: mac_main + - const: ptp_ref + - const: rmii_internal + - const: mac_cg + + power-domains: + maxItems: 1 + + mediatek,pericfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the syscon node that control ethernet + interface and timing delay. + + mediatek,tx-delay-ps: + description: + The internal TX clock delay (provided by this driver) in nanoseconds. + For MT2712 RGMII interface, Allowed value need to be a multiple of 170, + or will round down. Range 0~31*170. + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, + or will round down. Range 0~31*550. + For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290, + or will round down. Range 0~31*290. + + mediatek,rx-delay-ps: + description: + The internal RX clock delay (provided by this driver) in nanoseconds. + For MT2712 RGMII interface, Allowed value need to be a multiple of 170, + or will round down. Range 0~31*170. + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, + or will round down. Range 0~31*550. + For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple + of 290, or will round down. Range 0~31*290. + + mediatek,rmii-rxc: + type: boolean + description: + If present, indicates that the RMII reference clock, which is from external + PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin. + + mediatek,rmii-clk-from-mac: + type: boolean + description: + If present, indicates that MAC provides the RMII reference clock, which + outputs to TXC pin only. + + mediatek,txc-inverse: + type: boolean + description: + If present, indicates that + 1. tx clock will be inversed in MII/RGMII case, + 2. tx clock inside MAC will be inversed relative to reference clock + which is from external PHYs in RMII case, and it rarely happen. + 3. the reference clock, which outputs to TXC pin will be inversed in RMII case + when the reference clock is from MAC. + + mediatek,rxc-inverse: + type: boolean + description: + If present, indicates that + 1. rx clock will be inversed in MII/RGMII case. + 2. reference clock will be inversed when arrived at MAC in RMII case, when + the reference clock is from external PHYs. + 3. the inside clock, which be sent to MAC, will be inversed in RMII case when + the reference clock is from MAC. + + mediatek,mac-wol: + type: boolean + description: + If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled. + Otherwise, PHY WOL is preferred. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phy-mode + - mediatek,pericfg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2712-clk.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt2712-power.h> + + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a"; + reg = <0x1101c000 0x1300>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq"; + phy-mode = "rgmii-rxid"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "rmii_internal"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>, + <&topckgen CLK_TOP_ETHERPLL_50M>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; + mediatek,pericfg = <&pericfg>; + mediatek,tx-delay-ps = <1530>; + snps,txpbl = <1>; + snps,rxpbl = <1>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + snps,reset-delays-us = <0 10000 10000>; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt deleted file mode 100644 index 72d03e07cf7c..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ /dev/null @@ -1,98 +0,0 @@ -MediaTek Frame Engine Ethernet controller -========================================= - -The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs -have dual GMAC each represented by a child node.. - -* Ethernet controller node - -Required properties: -- compatible: Should be - "mediatek,mt2701-eth": for MT2701 SoC - "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC - "mediatek,mt7622-eth": for MT7622 SoC - "mediatek,mt7629-eth": for MT7629 SoC - "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the three frame engines interrupts in numeric - order. These are fe_int0, fe_int1 and fe_int2. -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC - "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", - "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", - "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", - "eth2pll" : For MT7629 SoC. -- power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain phandles to the ethsys reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property - These are "fe", "gmac" and "ppe" -- mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,infracfg: phandle to the syscon node that handles the path from - GMAC to PHY variants, which is required for MT7629 SoC. -- mediatek,sgmiisys: a list of phandles to the syscon node that handles the - SGMII setup which is required for those SoCs equipped with SGMII such - as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared - by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed - to GMAC1 and GMAC2, respectively. -- mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current: only for MT2701 and MT7623 SoC - -* Ethernet MAC node - -Required properties: -- compatible: Should be "mediatek,eth-mac" -- reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory and - the phy-mode "trgmii" required being provided when reg - is equal to 0 and the MAC uses fixed-link to connect - with internal switch such as MT7530. - -Example: - -eth: ethernet@1b100000 { - compatible = "mediatek,mt7623-eth"; - reg = <0 0x1b100000 0 0x20000>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW - GIC_SPI 199 IRQ_TYPE_LEVEL_LOW - GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - resets = <ðsys MT2701_ETHSYS_ETH_RST>; - reset-names = "eth"; - mediatek,ethsys = <ðsys>; - mediatek,pctl = <&syscfg_pctl_a>; - #address-cells = <1>; - #size-cells = <0>; - - gmac1: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy0>; - }; - - gmac2: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy1>; - }; - - mdio-bus { - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml new file mode 100644 index 000000000000..b726c6e14633 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/micrel,ks8851.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Micrel KS8851 Ethernet MAC (SPI and Parallel bus options) + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + enum: + - micrel,ks8851 # SPI bus option + - micrel,ks8851-mll # Parallel bus option + + interrupts: + maxItems: 1 + + reg: + minItems: 1 + items: + - description: SPI or Parallel bus hardware address + - description: Parallel bus command mode address + + reset-gpios: + maxItems: 1 + description: + The reset_n input pin + + vdd-supply: + description: | + Analog 3.3V supply for Ethernet MAC + + vdd-io-supply: + description: | + Digital 1.8V IO supply for Ethernet MAC + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: micrel,ks8851 + then: + $ref: /schemas/spi/spi-peripheral-props.yaml# + properties: + reg: + maxItems: 1 + - if: + properties: + compatible: + contains: + const: micrel,ks8851-mll + then: + $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + properties: + reg: + minItems: 2 + +unevaluatedProperties: false + +examples: + - | + /* SPI bus option */ + spi { + #address-cells = <1>; + #size-cells = <0>; + ethernet@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 8>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + /* Parallel bus option */ + memory-controller { + #address-cells = <2>; + #size-cells = <1>; + ethernet@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt deleted file mode 100644 index bbdf9a7359a2..000000000000 --- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt +++ /dev/null @@ -1,18 +0,0 @@ -Micrel KS8851 Ethernet mac (MLL) - -Required properties: -- compatible = "micrel,ks8851-mll" of parallel interface -- reg : 2 physical address and size of registers for data and command -- interrupts : interrupt connection - -Micrel KS8851 Ethernet mac (SPI) - -Required properties: -- compatible = "micrel,ks8851" or the deprecated "ks8851" -- reg : chip select number -- interrupts : interrupt connection - -Optional properties: -- vdd-supply: analog 3.3V supply for Ethernet mac -- vdd-io-supply: digital 1.8V IO supply for Ethernet mac -- reset-gpios: reset_n input pin diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index b921731cd970..2681168777a1 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -65,6 +65,71 @@ KSZ9031: step is 60ps. The default value is the neutral setting, so setting rxc-skew-ps=<0> actually results in -900 picoseconds adjustment. + The KSZ9031 hardware supports a range of skew values from negative to + positive, where the specific range is property dependent. All values + specified in the devicetree are offset by the minimum value so they + can be represented as positive integers in the devicetree since it's + difficult to represent a negative number in the devictree. + + The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0_0000 -900ps 0 + 0_0001 -840ps 60 + 0_0010 -780ps 120 + 0_0011 -720ps 180 + 0_0100 -660ps 240 + 0_0101 -600ps 300 + 0_0110 -540ps 360 + 0_0111 -480ps 420 + 0_1000 -420ps 480 + 0_1001 -360ps 540 + 0_1010 -300ps 600 + 0_1011 -240ps 660 + 0_1100 -180ps 720 + 0_1101 -120ps 780 + 0_1110 -60ps 840 + 0_1111 0ps 900 + 1_0000 60ps 960 + 1_0001 120ps 1020 + 1_0010 180ps 1080 + 1_0011 240ps 1140 + 1_0100 300ps 1200 + 1_0101 360ps 1260 + 1_0110 420ps 1320 + 1_0111 480ps 1380 + 1_1000 540ps 1440 + 1_1001 600ps 1500 + 1_1010 660ps 1560 + 1_1011 720ps 1620 + 1_1100 780ps 1680 + 1_1101 840ps 1740 + 1_1110 900ps 1800 + 1_1111 960ps 1860 + + The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps + data pads, and the rxdv-skew-ps, txen-skew-ps control pads. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0000 -420ps 0 + 0001 -360ps 60 + 0010 -300ps 120 + 0011 -240ps 180 + 0100 -180ps 240 + 0101 -120ps 300 + 0110 -60ps 360 + 0111 0ps 420 + 1000 60ps 480 + 1001 120ps 540 + 1010 180ps 600 + 1011 240ps 660 + 1100 300ps 720 + 1101 360ps 780 + 1110 420ps 840 + 1111 480ps 900 + Optional properties: Maximum value of 1860, default value 900: @@ -93,6 +158,7 @@ KSZ9031: no link will be established. KSZ9131: +LAN8841: All skew control options are specified in picoseconds. The increment step is 100ps. Unlike KSZ9031, the values represent picoseccond delays. @@ -120,11 +186,21 @@ KSZ9131: Examples: + /* Attach to an Ethernet device with autodetected PHY */ + &enet { + rxc-skew-ps = <1800>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1800>; + txen-skew-ps = <0>; + status = "okay"; + }; + + /* Attach to an explicitly-specified PHY */ mdio { phy0: ethernet-phy@0 { - rxc-skew-ps = <3000>; + rxc-skew-ps = <1800>; rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; + txc-skew-ps = <1800>; txen-skew-ps = <0>; reg = <0>; }; @@ -133,3 +209,20 @@ Examples: phy = <&phy0>; phy-mode = "rgmii-id"; }; + +References + + Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf + + Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf + +Notes: + + Note that a previous version of the Micrel ksz9021rl/rn Data Sheet + was missing extended register 106 (transmit data pad skews), and + incorrectly specified the ps per step as 200ps/step instead of + 120ps/step. The latest update to this document reflects the latest + revision of the Micrel specification even though usage in the kernel + still reflects that incorrect document. diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 8d157f0295a5..a407dd1b4614 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -16,6 +16,7 @@ Optional properties: KSZ8051: register 0x1f, bits 5..4 KSZ8081: register 0x1f, bits 5..4 KSZ8091: register 0x1f, bits 5..4 + LAN8814: register EP5.0, bit 6 See the respective PHY datasheet for the mode values. @@ -45,3 +46,12 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. + + - coma-mode-gpios: If present the given gpio will be deasserted when the + PHY is probed. + + Some PHYs have a COMA mode input pin which puts the PHY into + isolate and power-down mode. On some boards this input is connected + to a GPIO of the SoC. + + Supported on the LAN8814. diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml new file mode 100644 index 000000000000..accff93d38f8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip SMSC9500/LAN9530/LAN9730 USB Ethernet Controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired SMSC95xx compatible USB Ethernet + controller. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usb424,9500 # SMSC9500 USB Ethernet Device + - usb424,9505 # SMSC9505 USB Ethernet Device + - usb424,9530 # SMSC LAN9530 USB Ethernet Device + - usb424,9730 # SMSC LAN9730 USB Ethernet Device + - usb424,9900 # SMSC9500 USB Ethernet Device (SAL10) + - usb424,9901 # SMSC9505 USB Ethernet Device (SAL10) + - usb424,9902 # SMSC9500A USB Ethernet Device (SAL10) + - usb424,9903 # SMSC9505A USB Ethernet Device (SAL10) + - usb424,9904 # SMSC9512/9514 USB Hub & Ethernet Device (SAL10) + - usb424,9905 # SMSC9500A USB Ethernet Device (HAL) + - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) + - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) + - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Device ID) + - usb424,9e00 # SMSC9500A USB Ethernet Device + - usb424,9e01 # SMSC9505A USB Ethernet Device + - usb424,9e08 # SMSC LAN89530 USB Ethernet Device + - usb424,ec00 # SMSC9512/9514 USB Hub & Ethernet Device + + reg: + maxItems: 1 + + local-mac-address: true + mac-address: true + nvmem-cells: true + nvmem-cell-names: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9e00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml new file mode 100644 index 000000000000..306ef9ecf2b9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Lan966x Ethernet switch controller + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with + two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs, + it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to + 2 Quad-SGMII/Quad-USGMII interfaces. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: microchip,lan966x-switch + + reg: + items: + - description: cpu target + - description: general control block target + + reg-names: + items: + - const: cpu + - const: gcb + + interrupts: + minItems: 1 + items: + - description: register based extraction + - description: frame dma based extraction + - description: analyzer interrupt + - description: ptp interrupt + - description: ptp external interrupt + + interrupt-names: + minItems: 1 + items: + - const: xtr + - const: fdma + - const: ana + - const: ptp + - const: ptp-ext + + resets: + items: + - description: Reset controller used for switch core reset (soft reset) + + reset-names: + items: + - const: switch + + ethernet-ports: + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + additionalProperties: false + + patternProperties: + "^port@[0-9a-f]+$": + type: object + + $ref: /schemas/net/ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + reg: + description: + Switch port number + + phys: + description: + Phandle of a Ethernet SerDes PHY + + phy-mode: + description: + This specifies the interface used by the Ethernet SerDes towards + the PHY or SFP. + enum: + - gmii + - sgmii + - qsgmii + - 1000base-x + - 2500base-x + + phy-handle: + description: + Phandle of a Ethernet PHY. + + sfp: + description: + Phandle of an SFP. + + managed: true + + required: + - reg + - phys + - phy-mode + + oneOf: + - required: + - phy-handle + - required: + - sfp + - managed + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - resets + - reset-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr"; + resets = <&switch_reset 0>; + reset-names = "switch"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phys = <&serdes 0 0>; + phy-mode = "gmii"; + }; + + port1: port@1 { + reg = <1>; + sfp = <&sfp_eth1>; + managed = "in-band-status"; + phys = <&serdes 2 4>; + phy-mode = "sgmii"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml new file mode 100644 index 000000000000..fcafef8d5a33 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Ethernet switch controller + +maintainers: + - Steen Hegelund <steen.hegelund@microchip.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + The SparX-5 Enterprise Ethernet switch family provides a rich set of + Enterprise switching features such as advanced TCAM-based VLAN and + QoS processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile content + aware processor (VCAP). + + IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported + with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K + IPv6 (S,G) multicast groups. + + L3 security features include source guard and reverse path + forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and + IP tunnels (IP over GRE/IP). + + The SparX-5 switch family targets managed Layer 2 and Layer 3 + equipment in SMB, SME, and Enterprise where high port count + 1G/2.5G/5G/10G switching with 10G/25G aggregation links is required. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: microchip,sparx5-switch + + reg: + items: + - description: cpu target + - description: devices target + - description: general control block target + + reg-names: + items: + - const: cpu + - const: devices + - const: gcb + + interrupts: + minItems: 1 + items: + - description: register based extraction + - description: frame dma based extraction + - description: ptp interrupt + + interrupt-names: + minItems: 1 + items: + - const: xtr + - const: fdma + - const: ptp + + resets: + items: + - description: Reset controller used for switch core reset (soft reset) + + reset-names: + items: + - const: switch + + mac-address: true + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/net/ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + description: Switch port number + + phys: + maxItems: 1 + description: + phandle of a Ethernet SerDes PHY. This defines which SerDes + instance will handle the Ethernet traffic. + + microchip,bandwidth: + description: Specifies bandwidth in Mbit/s allocated to the port. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 25000 + + microchip,sd-sgpio: + description: + Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs + This is optional, and only needed if the default used index is + is not correct. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 383 + + required: + - reg + - phys + - phy-mode + - microchip,bandwidth + + oneOf: + - required: + - phy-handle + - required: + - sfp + - managed + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + switch: switch@600000000 { + compatible = "microchip,sparx5-switch"; + reg = <0 0x401000>, + <0x10004000 0x7fc000>, + <0x11010000 0xaf0000>; + reg-names = "cpu", "devices", "gcb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr"; + resets = <&reset 0>; + reset-names = "switch"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + microchip,bandwidth = <1000>; + phys = <&serdes 13>; + phy-handle = <&phy0>; + phy-mode = "qsgmii"; + }; + /* ... */ + /* Then the 25G interfaces */ + port60: port@60 { + reg = <60>; + microchip,bandwidth = <25000>; + phys = <&serdes 29>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth60>; + managed = "in-band-status"; + microchip,sd-sgpio = <365>; + }; + port61: port@61 { + reg = <61>; + microchip,bandwidth = <25000>; + phys = <&serdes 30>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth61>; + managed = "in-band-status"; + microchip,sd-sgpio = <369>; + }; + port62: port@62 { + reg = <62>; + microchip,bandwidth = <25000>; + phys = <&serdes 31>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth62>; + managed = "in-band-status"; + microchip,sd-sgpio = <373>; + }; + port63: port@63 { + reg = <63>; + microchip,bandwidth = <25000>; + phys = <&serdes 32>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth63>; + managed = "in-band-status"; + microchip,sd-sgpio = <377>; + }; + /* Finally the Management interface */ + port64: port@64 { + reg = <64>; + microchip,bandwidth = <1000>; + phys = <&serdes 0>; + phy-handle = <&phy64>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 01 02 03 ]; + }; + }; + }; + +... +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml : diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml new file mode 100644 index 000000000000..26688e2302ea --- /dev/null +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MotorComm yt8xxx Ethernet PHY + +maintainers: + - Frank Sae <frank.sae@motor-comm.com> + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + enum: + - ethernet-phy-id4f51.e91a + - ethernet-phy-id4f51.e91b + + rx-internal-delay-ps: + description: | + RGMII RX Clock Delay used only when PHY operates in RGMII mode with + internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. + enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, + 1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800, + 2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ] + default: 1950 + + tx-internal-delay-ps: + description: | + RGMII TX Clock Delay used only when PHY operates in RGMII mode with + internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds. + enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800, + 1950, 2100, 2250 ] + default: 1950 + + motorcomm,clk-out-frequency-hz: + description: clock output on clock output pin. + enum: [0, 25000000, 125000000] + default: 0 + + motorcomm,keep-pll-enabled: + description: | + If set, keep the PLL enabled even if there is no link. Useful if you + want to use the clock output without an ethernet link. + type: boolean + + motorcomm,auto-sleep-disabled: + description: | + If set, PHY will not enter sleep mode and close AFE after unplug cable + for a timer. + type: boolean + + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,tx-clk-adj-enabled: + description: | + This configuration is mainly to adapt to VF2 with JH7110 SoC. + Useful if you want to use tx-clk-xxxx-inverted to adj the delay of tx clk. + type: boolean + + motorcomm,tx-clk-10-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 10Mbps. + type: boolean + + motorcomm,tx-clk-100-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 100Mbps. + type: boolean + + motorcomm,tx-clk-1000-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 1000Mbps. + type: boolean + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy-mode = "rgmii-id"; + ethernet-phy@4 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id4f51.e91a"; + + reg = <4>; + rx-internal-delay-ps = <2100>; + tx-internal-delay-ps = <150>; + motorcomm,clk-out-frequency-hz = <0>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + }; + }; + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy-mode = "rgmii"; + ethernet-phy@5 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id4f51.e91a"; + + reg = <5>; + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml new file mode 100644 index 000000000000..5b292e7c9e46 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,miim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi MII Management Controller (MIIM) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + enum: + - mscc,ocelot-miim + - microchip,lan966x-miim + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + items: + - description: base address + - description: associated reset register for internal PHYs + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio@107009c { + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x36>, <0x10700f0 0x8>; + interrupts = <14>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml new file mode 100644 index 000000000000..86a9c3fc76c8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip VSC7514 Ethernet switch controller + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + Bindings for the Microchip VSC7514 switch driver + + The VSC7514 switch driver handles up to 11 ports and can inject/extract + packets using CPU. Additionally, PTP is supported as well as FDMA for faster + packet extraction/injection. + +allOf: + - if: + properties: + compatible: + const: mscc,vsc7514-switch + then: + $ref: ethernet-switch.yaml#/$defs/ethernet-ports + required: + - interrupts + - interrupt-names + properties: + reg: + minItems: 21 + reg-names: + minItems: 21 + + - if: + properties: + compatible: + const: mscc,vsc7512-switch + then: + $ref: /schemas/net/dsa/dsa.yaml#/$defs/ethernet-ports + properties: + reg: + maxItems: 20 + reg-names: + maxItems: 20 + +properties: + compatible: + enum: + - mscc,vsc7512-switch + - mscc,vsc7514-switch + + reg: + minItems: 20 + items: + - description: system target + - description: rewriter target + - description: qs target + - description: PTP target + - description: Port0 target + - description: Port1 target + - description: Port2 target + - description: Port3 target + - description: Port4 target + - description: Port5 target + - description: Port6 target + - description: Port7 target + - description: Port8 target + - description: Port9 target + - description: Port10 target + - description: QSystem target + - description: Analyzer target + - description: S0 target + - description: S1 target + - description: S2 target + - description: fdma target + + reg-names: + minItems: 20 + items: + - const: sys + - const: rew + - const: qs + - const: ptp + - const: port0 + - const: port1 + - const: port2 + - const: port3 + - const: port4 + - const: port5 + - const: port6 + - const: port7 + - const: port8 + - const: port9 + - const: port10 + - const: qsys + - const: ana + - const: s0 + - const: s1 + - const: s2 + - const: fdma + + interrupts: + minItems: 1 + items: + - description: PTP ready + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: ptp_rdy + - const: xtr + - const: fdma + +required: + - compatible + - reg + - reg-names + - ethernet-ports + +unevaluatedProperties: false + +examples: + # VSC7514 (Switchdev) + - | + switch@1010000 { + compatible = "mscc,vsc7514-switch"; + reg = <0x1010000 0x10000>, + <0x1030000 0x10000>, + <0x1080000 0x100>, + <0x10e0000 0x10000>, + <0x11e0000 0x100>, + <0x11f0000 0x100>, + <0x1200000 0x100>, + <0x1210000 0x100>, + <0x1220000 0x100>, + <0x1230000 0x100>, + <0x1240000 0x100>, + <0x1250000 0x100>, + <0x1260000 0x100>, + <0x1270000 0x100>, + <0x1280000 0x100>, + <0x1800000 0x80000>, + <0x1880000 0x10000>, + <0x1040000 0x10000>, + <0x1050000 0x10000>, + <0x1060000 0x10000>, + <0x1a0 0x1c4>; + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 16>; + interrupt-names = "ptp_rdy", "xtr", "fdma"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; + }; + }; + }; + # VSC7512 (DSA) + - | + ethernet-switch@1 { + compatible = "mscc,vsc7512-switch"; + reg = <0x71010000 0x10000>, + <0x71030000 0x10000>, + <0x71080000 0x100>, + <0x710e0000 0x10000>, + <0x711e0000 0x100>, + <0x711f0000 0x100>, + <0x71200000 0x100>, + <0x71210000 0x100>, + <0x71220000 0x100>, + <0x71230000 0x100>, + <0x71240000 0x100>, + <0x71250000 0x100>, + <0x71260000 0x100>, + <0x71270000 0x100>, + <0x71280000 0x100>, + <0x71800000 0x80000>, + <0x71880000 0x10000>, + <0x71040000 0x10000>, + <0x71050000 0x10000>, + <0x71060000 0x10000>; + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana", "s0", "s1", "s2"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&mac_sw>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt deleted file mode 100644 index 7104679cf59d..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-miim.txt +++ /dev/null @@ -1,26 +0,0 @@ -Microsemi MII Management Controller (MIIM) / MDIO -================================================= - -Properties: -- compatible: must be "mscc,ocelot-miim" -- reg: The base address of the MDIO bus controller register bank. Optionally, a - second register bank can be defined if there is an associated reset register - for internal PHYs -- #address-cells: Must be <1>. -- #size-cells: Must be <0>. MDIO addresses have no size component. -- interrupts: interrupt specifier (refer to the interrupt binding) - -Typically an MDIO bus might have several children. - -Example: - mdio@107009c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mscc,ocelot-miim"; - reg = <0x107009c 0x36>, <0x10700f0 0x8>; - interrupts = <14>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt deleted file mode 100644 index 3b6290b45ce5..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt +++ /dev/null @@ -1,83 +0,0 @@ -Microsemi Ocelot network Switch -=============================== - -The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513, -VSC7514) - -Required properties: -- compatible: Should be "mscc,vsc7514-switch" -- reg: Must contain an (offset, length) pair of the register set for each - entry in reg-names. -- reg-names: Must include the following entries: - - "sys" - - "rew" - - "qs" - - "ptp" (optional due to backward compatibility) - - "qsys" - - "ana" - - "portX" with X from 0 to the number of last port index available on that - switch -- interrupts: Should contain the switch interrupts for frame extraction, - frame injection and PTP ready. -- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain - "ptp_rdy" which is optional due to backward compatibility. -- ethernet-ports: A container for child nodes representing switch ports. - -The ethernet-ports container has the following properties - -Required properties: - -- #address-cells: Must be 1 -- #size-cells: Must be 0 - -Each port node must have the following mandatory properties: -- reg: Describes the port address in the switch - -Port nodes may also contain the following optional standardised -properties, described in binding documents: - -- phy-handle: Phandle to a PHY on an MDIO bus. See - Documentation/devicetree/bindings/net/ethernet.txt for details. - -Example: - - switch@1010000 { - compatible = "mscc,vsc7514-switch"; - reg = <0x1010000 0x10000>, - <0x1030000 0x10000>, - <0x1080000 0x100>, - <0x10e0000 0x10000>, - <0x11e0000 0x100>, - <0x11f0000 0x100>, - <0x1200000 0x100>, - <0x1210000 0x100>, - <0x1220000 0x100>, - <0x1230000 0x100>, - <0x1240000 0x100>, - <0x1250000 0x100>, - <0x1260000 0x100>, - <0x1270000 0x100>, - <0x1280000 0x100>, - <0x1800000 0x80000>, - <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", - "port2", "port3", "port4", "port5", "port6", - "port7", "port8", "port9", "port10", "qsys", - "ana"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - port0: port@0 { - reg = <0>; - phy-handle = <&phy0>; - }; - port1: port@1 { - reg = <1>; - phy-handle = <&phy1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt index 5ff37c68c941..0a3647fe331b 100644 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt @@ -31,6 +31,8 @@ Optional properties: VSC8531_LINK_100_ACTIVITY (2), VSC8531_LINK_ACTIVITY (0) and VSC8531_DUPLEX_COLLISION (8). +- load-save-gpios : GPIO used for the load/save operation of the PTP + hardware clock (PHC). Table: 1 - Edge rate change @@ -65,6 +67,7 @@ Example: compatible = "ethernet-phy-id0007.0570"; vsc8531,vddmac = <3300>; vsc8531,edge-slowdown = <7>; - vsc8531,led-0-mode = <LINK_1000_ACTIVITY>; - vsc8531,led-1-mode = <LINK_100_ACTIVITY>; + vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml new file mode 100644 index 000000000000..89663fdd3eba --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell International Ltd. NCI NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - marvell,nfc-i2c + - marvell,nfc-spi + - marvell,nfc-uart + + hci-muxed: + type: boolean + description: | + Specifies that the chip is muxing NCI over HCI frames + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + reset-n-io: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: | + Output GPIO pin used to reset the chip (active low) + + i2c-int-falling: + type: boolean + description: | + For I2C type of connection. Specifies that the chip read event shall be + triggered on falling edge. + + i2c-int-rising: + type: boolean + description: | + For I2C type of connection. Specifies that the chip read event shall be + triggered on rising edge. + + break-control: + type: boolean + description: | + For UART type of connection. Specifies that the chip needs specific break + management. + + flow-control: + type: boolean + description: | + For UART type of connection. Specifies that the chip is using RTS/CTS. + + spi-cpha: true + spi-cpol: true + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + const: marvell,nfc-i2c + then: + properties: + break-control: false + flow-control: false + spi-cpha: false + spi-cpol: false + spi-max-frequency: false + required: + - reg + + - if: + properties: + compatible: + contains: + const: marvell,nfc-spi + then: + $ref: /schemas/spi/spi-peripheral-props.yaml# + properties: + break-control: false + flow-control: false + i2c-int-falling: false + i2c-int-rising: false + required: + - reg + + - if: + properties: + compatible: + contains: + const: marvell,nfc-uart + then: + properties: + i2c-int-falling: false + i2c-int-rising: false + interrupts: false + spi-cpha: false + spi-cpol: false + spi-max-frequency: false + reg: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@8 { + compatible = "marvell,nfc-i2c"; + reg = <0x8>; + + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + i2c-int-rising; + + reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + nfc@0 { + compatible = "marvell,nfc-spi"; + reg = <0>; + + spi-max-frequency = <3000000>; + spi-cpha; + spi-cpol; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + + reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + + uart { + nfc { + compatible = "marvell,nfc-uart"; + + reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>; + + hci-muxed; + flow-control; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt deleted file mode 100644 index c9b35251bb20..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Marvell International Ltd. NCI NFC Controller - -Required properties: -- compatible: Should be: - - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices - - "marvell,nfc-i2c" for I2C devices - - "marvell,nfc-spi" for SPI devices - -Optional SoC specific properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. -- reset-n-io: Output GPIO pin used to reset the chip (active low). -- hci-muxed: Specifies that the chip is muxing NCI over HCI frames. - -Optional UART-based chip specific properties: -- flow-control: Specifies that the chip is using RTS/CTS. -- break-control: Specifies that the chip needs specific break management. - -Optional I2C-based chip specific properties: -- i2c-int-falling: Specifies that the chip read event shall be trigged on - falling edge. -- i2c-int-rising: Specifies that the chip read event shall be trigged on - rising edge. - -Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): - -&uart5 { - - nfcmrvluart: nfcmrvluart@5 { - compatible = "marvell,nfc-uart"; - - reset-n-io = <&gpio3 16 0>; - - hci-muxed; - flow-control; - } -}; - - -Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): - -&i2c1 { - clock-frequency = <400000>; - - nfcmrvli2c0: i2c@1 { - compatible = "marvell,nfc-i2c"; - - reg = <0x8>; - - /* I2C INT configuration */ - interrupt-parent = <&gpio3>; - interrupts = <21 0>; - - /* I2C INT trigger configuration */ - i2c-int-rising; - - /* Reset IO */ - reset-n-io = <&gpio3 19 0>; - }; -}; - - -Example (for ARM-based BeagleBoard Black on SPI0): - -&spi0 { - - mrvlnfcspi0: spi@0 { - compatible = "marvell,nfc-spi"; - - reg = <0>; - - /* SPI Bus configuration */ - spi-max-frequency = <3000000>; - spi-cpha; - spi-cpol; - - /* SPI INT configuration */ - interrupt-parent = <&gpio1>; - interrupts = <17 0>; - - /* Reset IO */ - reset-n-io = <&gpio3 19 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml new file mode 100644 index 000000000000..6924aff0b2c5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/nxp,nci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Semiconductors NCI NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - const: nxp,nxp-nci-i2c + - items: + - enum: + - nxp,nq310 + - nxp,pn547 + - const: nxp,nxp-nci-i2c + + enable-gpios: + description: Output GPIO pin used for enabling/disabling the controller + + firmware-gpios: + description: Output GPIO pin used to enter firmware download mode + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - enable-gpios + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@29 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x29>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml new file mode 100644 index 000000000000..07c67c1e985f --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/nxp,pn532.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Semiconductors PN532 NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - const: nxp,pn532 + - description: Deprecated bindings + enum: + - nxp,pn532-i2c + - nxp,pn533-i2c + deprecated: true + + interrupts: + description: Required if connected via I2C + maxItems: 1 + + reg: + description: Required if connected via I2C + maxItems: 1 + +required: + - compatible + +dependencies: + interrupts: [ reg ] + +additionalProperties: false + +examples: + # PN532 on I2C bus + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@24 { + compatible = "nxp,pn532"; + + reg = <0x24>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + # PN532 connected via UART + - | + serial@49042000 { + reg = <0x49042000 0x400>; + + nfc { + compatible = "nxp,pn532"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml new file mode 100644 index 000000000000..18b3a7d819df --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Semiconductors PN544 NFC Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: nxp,pn544-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + enable-gpios: + description: Output GPIO pin used for enabling/disabling the PN544 + maxItems: 1 + + firmware-gpios: + description: Output GPIO pin used to enter firmware download mode + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - enable-gpios + - firmware-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt deleted file mode 100644 index cfaf88998918..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ /dev/null @@ -1,33 +0,0 @@ -* NXP Semiconductors NXP NCI NFC Controllers - -Required properties: -- compatible: Should be "nxp,nxp-nci-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- enable-gpios: Output GPIO pin used for enabling/disabling the chip -- firmware-gpios: Output GPIO pin used to enter firmware download mode - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): - -&i2c2 { - - - npc100: npc100@29 { - - compatible = "nxp,nxp-nci-i2c"; - - reg = <0x29>; - clock-frequency = <100000>; - - interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_HIGH>; - - enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt deleted file mode 100644 index a5507dc499bc..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/pn532.txt +++ /dev/null @@ -1,46 +0,0 @@ -* NXP Semiconductors PN532 NFC Controller - -Required properties: -- compatible: Should be - - "nxp,pn532" Place a node with this inside the devicetree node of the bus - where the NFC chip is connected to. - Currently the kernel has phy bindings for uart and i2c. - - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding. - - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding. - -Required properties if connected on i2c: -- clock-frequency: I²C work frequency. -- reg: for the I²C bus address. This is fixed at 0x24 for the PN532. -- interrupts: GPIO interrupt to which the chip is connected - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with PN532 on I2C2): - -&i2c2 { - - - pn532: nfc@24 { - - compatible = "nxp,pn532"; - - reg = <0x24>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio1>; - interrupts = <17 IRQ_TYPE_EDGE_FALLING>; - - }; -}; - -Example (for PN532 connected via uart): - -uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - - pn532: nfc { - compatible = "nxp,pn532"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt deleted file mode 100644 index 92f399ec22b8..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ /dev/null @@ -1,33 +0,0 @@ -* NXP Semiconductors PN544 NFC Controller - -Required properties: -- compatible: Should be "nxp,pn544-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- enable-gpios: Output GPIO pin used for enabling/disabling the PN544 -- firmware-gpios: Output GPIO pin used to enter firmware download mode - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with PN544 on I2C2): - -&i2c2 { - - - pn544: pn544@28 { - - compatible = "nxp,pn544-i2c"; - - reg = <0x28>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio1>; - interrupts = <17 GPIO_ACTIVE_HIGH>; - - enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt deleted file mode 100644 index f02f6fb7f81c..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Samsung S3FWRN5 NCI NFC Controller - -Required properties: -- compatible: Should be "samsung,s3fwrn5-i2c". -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip -- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and - sleep/wakeup control - -Example: - -&hsi2c_4 { - s3fwrn5@27 { - compatible = "samsung,s3fwrn5-i2c"; - - reg = <0x27>; - - interrupt-parent = <&gpa1>; - interrupts = <3 0 0>; - - s3fwrn5,en-gpios = <&gpf1 4 0>; - s3fwrn5,fw-gpios = <&gpj0 2 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml new file mode 100644 index 000000000000..12baee45752c --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3FWRN5 NCI NFC Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3fwrn5-i2c + - samsung,s3fwrn82 + + en-gpios: + maxItems: 1 + description: + Output GPIO pin used for enabling/disabling the chip + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + wake-gpios: + maxItems: 1 + description: + Output GPIO pin used to enter firmware mode and sleep/wakeup control + + s3fwrn5,en-gpios: + maxItems: 1 + deprecated: true + description: + Use en-gpios + + s3fwrn5,fw-gpios: + maxItems: 1 + deprecated: true + description: + Use wake-gpios + +additionalProperties: false + +required: + - compatible + - en-gpios + - wake-gpios + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,s3fwrn5-i2c + then: + required: + - interrupts + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupt-parent = <&gpa1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc 20>; + }; + }; + # UART example on Raspberry Pi + - | + uart0 { + nfc { + compatible = "samsung,s3fwrn82"; + + en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml new file mode 100644 index 000000000000..1dcbddbc5a74 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics ST NCI NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - st,st21nfcb-i2c + - st,st21nfcb-spi + - st,st21nfcc-i2c + + reset-gpios: + description: Output GPIO pin used for resetting the controller + + ese-present: + type: boolean + description: | + Specifies that an ese is physically connected to the controller + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + uicc-present: + type: boolean + description: | + Specifies that the uicc swp signal can be physically connected to the + controller + +required: + - compatible + - interrupts + - reg + - reset-gpios + +if: + properties: + compatible: + contains: + enum: + - st,st21nfcb-i2c + - st,st21nfcc-i2c +then: + properties: + spi-max-frequency: false +else: + $ref: /schemas/spi/spi-peripheral-props.yaml# + required: + - spi-max-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@8 { + compatible = "st,st21nfcb-i2c"; + reg = <0x08>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + nfc@0 { + compatible = "st,st21nfcb-spi"; + reg = <0>; + + spi-max-frequency = <4000000>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml new file mode 100644 index 000000000000..8a7274357b46 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/st,st21nfca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics SAS ST21NFCA NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: st,st21nfca-i2c + + enable-gpios: + description: Output GPIO pin used for enabling/disabling the controller + + ese-present: + type: boolean + description: | + Specifies that an ese is physically connected to the controller + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + uicc-present: + type: boolean + description: | + Specifies that the uicc swp signal can be physically connected to the + controller + +required: + - compatible + - enable-gpios + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@1 { + compatible = "st,st21nfca-i2c"; + reg = <0x1>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml new file mode 100644 index 000000000000..647569051ed8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/st,st95hf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics ST95HF NFC controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: st,st95hf + + enable-gpio: + description: Output GPIO pin used for enabling/disabling the controller + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + st95hfvin-supply: + description: ST95HF transceiver's Vin regulator supply + +required: + - compatible + - enable-gpio + - interrupts + - reg + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + nfc@0{ + compatible = "st,st95hf"; + reg = <0>; + + spi-max-frequency = <1000000>; + enable-gpio = <&pio4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&pio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt deleted file mode 100644 index baa8f8133d19..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ /dev/null @@ -1,38 +0,0 @@ -* STMicroelectronics SAS. ST NCI NFC Controller - -Required properties: -- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- reset-gpios: Output GPIO pin used to reset the ST21NFCB - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. -- ese-present: Specifies that an ese is physically connected to the nfc -controller. -- uicc-present: Specifies that the uicc swp signal can be physically -connected to the nfc controller. - -Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): - -&i2c2 { - - - st21nfcb: st21nfcb@8 { - - compatible = "st,st21nfcb-i2c"; - - reg = <0x08>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - - reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - - ese-present; - uicc-present; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt deleted file mode 100644 index d33343330b94..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ /dev/null @@ -1,36 +0,0 @@ -* STMicroelectronics SAS. ST NCI NFC Controller - -Required properties: -- compatible: Should be "st,st21nfcb-spi" -- spi-max-frequency: Maximum SPI frequency (<= 4000000). -- interrupts: GPIO interrupt to which the chip is connected -- reset-gpios: Output GPIO pin used to reset the ST21NFCB - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. -- ese-present: Specifies that an ese is physically connected to the nfc -controller. -- uicc-present: Specifies that the uicc swp signal can be physically -connected to the nfc controller. - -Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): - -&mcspi4 { - - - st21nfcb: st21nfcb@0 { - - compatible = "st,st21nfcb-spi"; - - clock-frequency = <4000000>; - - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - - reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - - ese-present; - uicc-present; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt deleted file mode 100644 index b8bd90f80e12..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ /dev/null @@ -1,37 +0,0 @@ -* STMicroelectronics SAS. ST21NFCA NFC Controller - -Required properties: -- compatible: Should be "st,st21nfca-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. -- ese-present: Specifies that an ese is physically connected to the nfc -controller. -- uicc-present: Specifies that the uicc swp signal can be physically -connected to the nfc controller. - -Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): - -&i2c2 { - - - st21nfca: st21nfca@1 { - - compatible = "st,st21nfca-i2c"; - - reg = <0x01>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - - ese-present; - uicc-present; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt deleted file mode 100644 index 3f373a1e20ff..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ /dev/null @@ -1,45 +0,0 @@ -* STMicroelectronics : NFC Transceiver ST95HF - -ST NFC Transceiver is required to attach with SPI bus. -ST95HF node should be defined in DT as SPI slave device of SPI -master with which ST95HF transceiver is physically connected. -The properties defined below are required to be the part of DT -to include ST95HF transceiver into the platform. - -Required properties: -=================== -- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus. - -- compatible: should be "st,st95hf" for ST95HF NFC transceiver - -- spi-max-frequency: Max. operating SPI frequency for ST95HF - transceiver. - -- enable-gpio: GPIO line to enable ST95HF transceiver. - -- interrupts : Standard way to define ST95HF transceiver's out - interrupt. - -Optional property: -================= -- st95hfvin-supply : This is an optional property. It contains a - phandle to ST95HF transceiver's regulator supply node in DT. - -Example: -======= -spi@9840000 { - reg = <0x9840000 0x110>; - #address-cells = <1>; - #size-cells = <0>; - cs-gpios = <&pio0 4>; - - st95hf@0{ - reg = <0>; - compatible = "st,st95hf"; - spi-max-frequency = <1000000>; - enable-gpio = <&pio4 0>; - interrupt-parent = <&pio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml new file mode 100644 index 000000000000..9cc236ec42f2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Mark Greer <mgreer@animalcreek.com> + +properties: + compatible: + const: ti,trf7970a + + autosuspend-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify autosuspend delay in milliseconds. + + clock-frequency: + description: | + Set to specify that the input frequency to the trf7970a is 13560000Hz or + 27120000Hz + + en2-rf-quirk: + type: boolean + description: | + Specify that the trf7970a being used has the "EN2 RF" erratum + + interrupts: + maxItems: 1 + + irq-status-read-quirk: + type: boolean + description: | + Specify that the trf7970a being used has the "IRQ Status Read" erratum + + reg: + maxItems: 1 + + ti,enable-gpios: + minItems: 1 + maxItems: 2 + description: | + One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2 + is optional. + + vdd-io-supply: + description: | + Regulator specifying voltage for VDD-IO + + vin-supply: + description: | + Regulator for supply voltage to VIN pin + +required: + - compatible + - interrupts + - reg + - spi-max-frequency + - ti,enable-gpios + - vin-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@0 { + compatible = "ti,trf7970a"; + reg = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&trf7970a_default>; + spi-max-frequency = <2000000>; + interrupt-parent = <&gpio2>; + interrupts = <14 0>; + + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; + vin-supply = <&ldo3_reg>; + vdd-io-supply = <&ldo2_reg>; + autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; + clock-frequency = <27120000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt deleted file mode 100644 index ba1934b950e5..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver - -Required properties: -- compatible: Should be "ti,trf7970a". -- spi-max-frequency: Maximum SPI frequency (<= 2000000). -- interrupts: A single interrupt specifier. -- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the - TRF7970A. EN2 is optional. -- vin-supply: Regulator for supply voltage to VIN pin - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. -- autosuspend-delay: Specify autosuspend delay in milliseconds. -- irq-status-read-quirk: Specify that the trf7970a being used has the - "IRQ Status Read" erratum. -- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" - erratum. -- vdd-io-supply: Regulator specifying voltage for vdd-io -- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz - -Example (for ARM-based BeagleBone with TRF7970A on SPI1): - -&spi1 { - - nfc@0 { - compatible = "ti,trf7970a"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&trf7970a_default>; - spi-max-frequency = <2000000>; - interrupt-parent = <&gpio2>; - interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, - <&gpio2 5 GPIO_ACTIVE_HIGH>; - vin-supply = <&ldo3_reg>; - vdd-io-supply = <&ldo2_reg>; - autosuspend-delay = <30000>; - irq-status-read-quirk; - en2-rf-quirk; - clock-frequency = <27120000>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml new file mode 100644 index 000000000000..2bd3efff2485 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra234 MGBE Multi-Gigabit Ethernet Controller + +maintainers: + - Thierry Reding <treding@nvidia.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra234-mgbe + + reg: + maxItems: 3 + + reg-names: + items: + - const: hypervisor + - const: mac + - const: xpcs + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + items: + - const: common + - const: macsec-ns + - const: macsec + + clocks: + maxItems: 12 + + clock-names: + items: + - const: mgbe + - const: mac + - const: mac-divider + - const: ptp-ref + - const: rx-input-m + - const: rx-input + - const: tx + - const: eee-pcs + - const: rx-pcs-input + - const: rx-pcs-m + - const: rx-pcs + - const: tx-pcs + + resets: + maxItems: 2 + + reset-names: + items: + - const: mac + - const: pcs + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem + - const: write + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + phy-handle: true + + phy-mode: + contains: + enum: + - usxgmii + - 10gbase-kr + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: + Optional node for embedded MDIO controller. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - phy-handle + - phy-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + ethernet@6800000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06800000 0x10000>, + <0x06810000 0x10000>, + <0x068a0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>, + <&bpmp TEGRA234_CLK_MGBE0_MAC>, + <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_TX>, + <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>, + <&bpmp TEGRA234_RESET_MGBE0_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>; + + phy-handle = <&mgbe0_phy>; + phy-mode = "usxgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mgbe0_phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml new file mode 100644 index 000000000000..4c01cae7c93a --- /dev/null +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8/9 DWMAC glue layer + +maintainers: + - Clark Wang <xiaoning.wang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - NXP Linux Team <linux-imx@nxp.com> + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - nxp,imx8mp-dwmac-eqos + - nxp,imx8dxl-dwmac-eqos + - nxp,imx93-dwmac-eqos + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - nxp,imx8mp-dwmac-eqos + - nxp,imx8dxl-dwmac-eqos + - nxp,imx93-dwmac-eqos + - const: snps,dwmac-5.10a + + clocks: + minItems: 3 + items: + - description: MAC host clock + - description: MAC apb clock + - description: MAC timer clock + - description: MAC RGMII TX clock + - description: EQOS MEM clock + + clock-names: + minItems: 3 + maxItems: 5 + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + - tx + - mem + + intf_mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the GPR syscon + - description: the offset of the GPR register + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the GPR register, and the offset of the GPR register. + + snps,rmii_refclk_ext: + $ref: /schemas/types.yaml#/definitions/flag + description: + To select RMII reference clock from external. + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx8mp-clock.h> + + eqos: ethernet@30bf0000 { + compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, + <&clk IMX8MP_CLK_QOS_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; + phy-mode = "rgmii"; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml new file mode 100644 index 000000000000..85bfa45f5122 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TJA11xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for NXP TJA11xx automotive PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +patternProperties: + "^ethernet-phy@[0-9a-f]+$": + type: object + additionalProperties: false + description: | + Some packages have multiple PHYs. Secondary PHY should be defines as + subnode of the first (parent) PHY. + + properties: + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the child PHY. Should be +1 of parent PHY. + + nxp,rmii-refclk-in: + type: boolean + description: | + The REF_CLK is provided for both transmitted and received data + in RMII mode. This clock signal is provided by the PHY and is + typically derived from an external 25MHz crystal. Alternatively, + a 50MHz clock signal generated by an external oscillator can be + connected to pin REF_CLK. A third option is to connect a 25MHz + clock to pin CLK_IN_OUT. So, the REF_CLK should be configured + as input or output according to the actual circuit connection. + If present, indicates that the REF_CLK will be configured as + interface reference clock input when RMII mode enabled. + If not present, the REF_CLK will be configured as interface + reference clock output when RMII mode enabled. + Only supported on TJA1100 and TJA1101. + + required: + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + tja1101_phy0: ethernet-phy@4 { + reg = <0x4>; + nxp,rmii-refclk-in; + }; + }; + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + tja1102_phy0: ethernet-phy@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + + tja1102_phy1: ethernet-phy@5 { + reg = <0x5>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt deleted file mode 100644 index d7117a22fd87..000000000000 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Oxford Semiconductor OXNAS DWMAC Ethernet controller - -The device inherits all the properties of the dwmac/stmmac devices -described in the file stmmac.txt in the current directory with the -following changes. - -Required properties on all platforms: - -- compatible: For the OX820 SoC, it should be : - - "oxsemi,ox820-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - -- clocks: Should contain phandles to the following clocks -- clock-names: Should contain the following: - - "stmmaceth" for the host clock - see stmmac.txt - - "gmac" for the peripheral gate clock - -- oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Example : - -etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - -}; diff --git a/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml new file mode 100644 index 000000000000..fbedf696c555 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/fsl,lynx-pcs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Lynx PCS + +maintainers: + - Ioana Ciornei <ioana.ciornei@nxp.com> + +description: | + NXP Lynx 10G and 28G SerDes have Ethernet PCS devices which can be used as + protocol controllers. They are accessible over the Ethernet interface's MDIO + bus. + +properties: + compatible: + const: fsl,lynx-pcs + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + qsgmii_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml new file mode 100644 index 000000000000..1bacc0eeff75 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SGMIISYS Controller + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks + to the ethernet subsystem to which it is attached. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt7622-sgmiisys + - mediatek,mt7629-sgmiisys + - mediatek,mt7981-sgmiisys_0 + - mediatek,mt7981-sgmiisys_1 + - mediatek,mt7986-sgmiisys_0 + - mediatek,mt7986-sgmiisys_1 + - const: syscon + - items: + - enum: + - mediatek,mt7988-sgmiisys0 + - mediatek,mt7988-sgmiisys1 + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + mediatek,pnswap: + description: Invert polarity of the SGMII data lanes + type: boolean + + pcs: + type: object + description: MediaTek LynxI HSGMII PCS + properties: + compatible: + const: mediatek,mt7988-sgmii + + clocks: + maxItems: 3 + + clock-names: + items: + - const: sgmii_sel + - const: sgmii_tx + - const: sgmii_rx + + required: + - compatible + - clocks + - clock-names + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt7988-sgmiisys0 + - mediatek,mt7988-sgmiisys1 + + then: + required: + - pcs + + else: + properties: + pcs: false + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + sgmiisys: syscon@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml new file mode 100644 index 000000000000..2d33bbab7163 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 MII converter + +maintainers: + - Clément Léger <clement.leger@bootlin.com> + +description: | + This MII converter is present on the Renesas RZ/N1 SoC family. It is + responsible to do MII passthrough or convert it to RMII/RGMII. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + items: + - enum: + - renesas,r9a06g032-miic + - const: renesas,rzn1-miic + + reg: + maxItems: 1 + + clocks: + items: + - description: MII reference clock + - description: RGMII reference clock + - description: RMII reference clock + - description: AHB clock used for the MII converter register interface + + clock-names: + items: + - const: mii_ref + - const: rgmii_ref + - const: rmii_ref + - const: hclk + + renesas,miic-switch-portin: + description: MII Switch PORTIN configuration. This value should use one of + the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + power-domains: + maxItems: 1 + +patternProperties: + "^mii-conv@[0-5]$": + type: object + description: MII converter port + + properties: + reg: + description: MII Converter port number. + enum: [1, 2, 3, 4, 5] + + renesas,miic-input: + description: Converter input port configuration. This value should use + one of the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - renesas,miic-input + + additionalProperties: false + + allOf: + - if: + properties: + reg: + const: 1 + then: + properties: + renesas,miic-input: + const: 0 + - if: + properties: + reg: + const: 2 + then: + properties: + renesas,miic-input: + enum: [1, 11] + - if: + properties: + reg: + const: 3 + then: + properties: + renesas,miic-input: + enum: [7, 10] + - if: + properties: + reg: + const: 4 + then: + properties: + renesas,miic-input: + enum: [4, 6, 9, 13] + - if: + properties: + reg: + const: 5 + then: + properties: + renesas,miic-input: + enum: [3, 5, 8, 12] + +required: + - '#address-cells' + - '#size-cells' + - compatible + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/net/pcs-rzn1-miic.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + eth-miic@44030000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; + reg = <0x44030000 0x10000>; + clocks = <&sysctrl R9A06G032_CLK_MII_REF>, + <&sysctrl R9A06G032_CLK_RGMII_REF>, + <&sysctrl R9A06G032_CLK_RMII_REF>, + <&sysctrl R9A06G032_HCLK_SWITCH_RG>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + renesas,miic-switch-portin = <MIIC_GMAC2_PORT>; + power-domains = <&sysctrl>; + + mii_conv1: mii-conv@1 { + renesas,miic-input = <MIIC_GMAC1_PORT>; + reg = <1>; + }; + + mii_conv2: mii-conv@2 { + renesas,miic-input = <MIIC_SWITCH_PORTD>; + reg = <2>; + }; + + mii_conv3: mii-conv@3 { + renesas,miic-input = <MIIC_SWITCH_PORTC>; + reg = <3>; + }; + + mii_conv4: mii-conv@4 { + renesas,miic-input = <MIIC_SWITCH_PORTB>; + reg = <4>; + }; + + mii_conv5: mii-conv@5 { + renesas,miic-input = <MIIC_SWITCH_PORTA>; + reg = <5>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml new file mode 100644 index 000000000000..94a527e6aa1b --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator based Power Sourcing Equipment + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: Regulator based PoDL PSE controller. The device must be referenced + by the PHY node to control power injection to the Ethernet cable. + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + const: podl-pse-regulator + + '#pse-cells': + const: 0 + + pse-supply: + description: Power supply for the PSE controller + +additionalProperties: false + +required: + - compatible + - pse-supply + +examples: + - | + ethernet-pse { + compatible = "podl-pse-regulator"; + pse-supply = <®_t1l1>; + #pse-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml new file mode 100644 index 000000000000..2d382faca0e6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power Sourcing Equipment (PSE). + +description: Binding for the Power Sourcing Equipment (PSE) as defined in the + IEEE 802.3 specification. It is designed for hardware which is delivering + power over twisted pair/ethernet cable. The ethernet-pse nodes should be + used to describe PSE controller and referenced by the ethernet-phy node. + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + $nodename: + pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$" + + "#pse-cells": + description: + Used to uniquely identify a PSE instance within an IC. Will be + 0 on PSE nodes with only a single output and at least 1 on nodes + controlling several outputs. + enum: [0, 1] + +required: + - "#pse-cells" + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.txt b/Documentation/devicetree/bindings/net/qca,ar71xx.txt deleted file mode 100644 index 2a33e71ba72b..000000000000 --- a/Documentation/devicetree/bindings/net/qca,ar71xx.txt +++ /dev/null @@ -1,45 +0,0 @@ -Required properties: -- compatible: Should be "qca,<soc>-eth". Currently support compatibles are: - qca,ar7100-eth - Atheros AR7100 - qca,ar7240-eth - Atheros AR7240 - qca,ar7241-eth - Atheros AR7241 - qca,ar7242-eth - Atheros AR7242 - qca,ar9130-eth - Atheros AR9130 - qca,ar9330-eth - Atheros AR9330 - qca,ar9340-eth - Atheros AR9340 - qca,qca9530-eth - Qualcomm Atheros QCA9530 - qca,qca9550-eth - Qualcomm Atheros QCA9550 - qca,qca9560-eth - Qualcomm Atheros QCA9560 - -- reg : Address and length of the register set for the device -- interrupts : Should contain eth interrupt -- phy-mode : See ethernet.txt file in the same directory -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "eth" and "mdio". -- resets: Should contain phandles to the reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property. These are "mac" and "mdio" - -Optional properties: -- phy-handle : phandle to the PHY device connected to this device. -- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. - Use instead of phy-handle. - -Optional subnodes: -- mdio : specifies the mdio bus, used as a container for phy nodes - according to phy.txt in the same directory - -Example: - -ethernet@1a000000 { - compatible = "qca,ar9330-eth"; - reg = <0x1a000000 0x200>; - interrupts = <5>; - resets = <&rst 13>, <&rst 23>; - reset-names = "mac", "mdio"; - clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>; - clock-names = "eth", "mdio"; - - phy-mode = "gmii"; -}; diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml new file mode 100644 index 000000000000..89f94b31b546 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCA AR71XX MAC + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - qca,ar7100-eth # Atheros AR7100 + - qca,ar7240-eth # Atheros AR7240 + - qca,ar7241-eth # Atheros AR7241 + - qca,ar7242-eth # Atheros AR7242 + - qca,ar9130-eth # Atheros AR9130 + - qca,ar9330-eth # Atheros AR9330 + - qca,ar9340-eth # Atheros AR9340 + - qca,qca9530-eth # Qualcomm Atheros QCA9530 + - qca,qca9550-eth # Qualcomm Atheros QCA9550 + - qca,qca9560-eth # Qualcomm Atheros QCA9560 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: MAC main clock + - description: MDIO clock + + clock-names: + items: + - const: eth + - const: mdio + + resets: + items: + - description: MAC reset + - description: MDIO reset + + reset-names: + items: + - const: mac + - const: mdio + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - phy-mode + - clocks + - clock-names + - resets + - reset-names + +unevaluatedProperties: false + +examples: + # Lager board + - | + eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll 1>, <&pll 2>; + clock-names = "eth", "mdio"; + phy-mode = "mii"; + phy-handle = <&phy_port4>; + }; + + eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll 1>, <&pll 2>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: ethernet-phy@0 { + reg = <0x0>; + interrupts = <0>; + }; + + phy_port1: ethernet-phy@1 { + reg = <0x1>; + interrupts = <0>; + }; + + phy_port2: ethernet-phy@2 { + reg = <0x2>; + interrupts = <0>; + }; + + phy_port3: ethernet-phy@3 { + reg = <0x3>; + interrupts = <0>; + }; + + phy_port4: ethernet-phy@4 { + reg = <0x4>; + interrupts = <0>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..3acd09f0da86 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,17 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + qca,disable-smarteee: + description: Disable Atheros SmartEEE feature. + type: boolean qca,keep-pll-enabled: description: | @@ -38,6 +40,26 @@ properties: Only supported on the AR8031. type: boolean + qca,disable-hibernation-mode: + description: | + Disable Atheros AR803X PHYs hibernation mode. If present, indicates + that the hardware of PHY will not enter power saving mode when the + cable is disconnected. And the RX_CLK always keeps outputting a + valid clock. + type: boolean + + qca,smarteee-tw-us-100m: + description: EEE Tw parameter for 100M links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + + qca,smarteee-tw-us-1g: + description: EEE Tw parameter for gigabit links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + vddio-supply: description: | RGMII I/O voltage regulator (see regulator/regulator.yaml). @@ -52,17 +74,18 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 21c36e524993..8f5ae0b84eec 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -68,7 +68,7 @@ Required properties: Optional properties: - local-mac-address : see ./ethernet.txt - current-speed : current baud rate of QCA7000 which defaults to 115200 - if absent, see also ../serial/slave-device.txt + if absent, see also ../serial/serial.yaml UART Example: diff --git a/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml new file mode 100644 index 000000000000..b30544410d09 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm BAM Data Multiplexer + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +description: | + The BAM Data Multiplexer provides access to the network data channels + of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 + or MSM8974. It is built using a simple protocol layer on top of a DMA engine + (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control. + + Note that this schema does not directly describe a hardware block but rather + a firmware convention that combines several other hardware blocks (such as the + DMA engine). As such it is specific to a firmware version, not a particular + SoC or hardware version. + +properties: + compatible: + const: qcom,bam-dmux + + interrupts: + description: + Interrupts used by the modem to signal the AP. + Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH. + items: + - description: Power control + - description: Power control acknowledgment + + interrupt-names: + items: + - const: pc + - const: pc-ack + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the modem. + items: + - description: Power control + - description: Power control acknowledgment + + qcom,smem-state-names: + description: Names for the state bits used by the AP to signal the modem. + items: + - const: pc + - const: pc-ack + + dmas: + items: + - description: TX DMA channel phandle + - description: RX DMA channel phandle + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + mpss: remoteproc { + bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt deleted file mode 100644 index fcf5035810b5..000000000000 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt +++ /dev/null @@ -1,64 +0,0 @@ -Qualcomm Ethernet ETHQOS device - -This documents dwmmac based ethernet device which supports Gigabit -ethernet for version v2.3.0 onwards. - -This device has following properties: - -Required properties: - -- compatible: Should be qcom,qcs404-ethqos" - -- reg: Address and length of the register set for the device - -- reg-names: Should contain register names "stmmaceth", "rgmii" - -- clocks: Should contain phandle to clocks - -- clock-names: Should contain clock names "stmmaceth", "pclk", - "ptp_ref", "rgmii" - -- interrupts: Should contain phandle to interrupts - -- interrupt-names: Should contain interrupt names "macirq", "eth_lpi" - -Rest of the properties are defined in stmmac.txt file in same directory - - -Example: - -ethernet: ethernet@7a80000 { - compatible = "qcom,qcs404-ethqos"; - reg = <0x07a80000 0x10000>, - <0x07a96000 0x100>; - reg-names = "stmmaceth", "rgmii"; - clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; - clocks = <&gcc GCC_ETH_AXI_CLK>, - <&gcc GCC_ETH_SLAVE_AHB_CLK>, - <&gcc GCC_ETH_PTP_CLK>, - <&gcc GCC_ETH_RGMII_CLK>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_lpi"; - snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - - snps,txpbl = <8>; - snps,rxpbl = <2>; - snps,aal; - snps,tso; - - phy-handle = <&phy1>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; - phy1: phy@4 { - device_type = "ethernet-phy"; - reg = <0x4>; - }; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml new file mode 100644 index 000000000000..7bdb412a0185 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ethernet ETHQOS device + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + dwmmac based Qualcomm ethernet devices which support Gigabit + ethernet (version v2.3.0 and onwards). + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + enum: + - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos + + reg: + maxItems: 2 + + reg-names: + items: + - const: stmmaceth + - const: rgmii + + interrupts: + minItems: 1 + items: + - description: Combined signal for various interrupt events + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + minItems: 1 + items: + - const: macirq + - const: eth_lpi + + clocks: + maxItems: 4 + + clock-names: + items: + - const: stmmaceth + - const: pclk + - const: ptp_ref + - enum: + - rgmii + - phyaux + + iommus: + maxItems: 1 + + phys: true + + phy-names: + const: serdes + +required: + - compatible + - clocks + - clock-names + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/gpio/gpio.h> + + ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + snps,tso; + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml new file mode 100644 index 000000000000..c30218684cfe --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IP Accelerator (IPA) + +maintainers: + - Alex Elder <elder@kernel.org> + +description: + This binding describes the Qualcomm IPA. The IPA is capable of offloading + certain network processing tasks (e.g. filtering, routing, and NAT) from + the main processor. + + The IPA sits between multiple independent "execution environments," + including the Application Processor (AP) and the modem. The IPA presents + a Generic Software Interface (GSI) to each execution environment. + The GSI is an integral part of the IPA, but it is logically isolated + and has a distinct interrupt and a separately-defined address space. + + See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. See + iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU + bindings. + + + - | + -------- --------- + | | | | + | AP +<---. .----+ Modem | + | +--. | | .->+ | + | | | | | | | | + -------- | | | | --------- + v | v | + --+-+---+-+-- + | GSI | + |-----------| + | | + | IPA | + | | + ------------- + +properties: + compatible: + oneOf: + - enum: + - qcom,msm8998-ipa + - qcom,sc7180-ipa + - qcom,sc7280-ipa + - qcom,sdm845-ipa + - qcom,sdx55-ipa + - qcom,sdx65-ipa + - qcom,sm6350-ipa + - qcom,sm8350-ipa + - qcom,sm8550-ipa + - items: + - enum: + - qcom,sm8650-ipa + - const: qcom,sm8550-ipa + + reg: + items: + - description: IPA registers + - description: IPA shared memory + - description: GSI registers + + reg-names: + items: + - const: ipa-reg + - const: ipa-shared + - const: gsi + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: core + + interrupts: + items: + - description: IPA interrupt (hardware IRQ) + - description: GSI interrupt (hardware IRQ) + - description: Modem clock query interrupt (smp2p interrupt) + - description: Modem setup ready interrupt (smp2p interrupt) + + interrupt-names: + items: + - const: ipa + - const: gsi + - const: ipa-clock-query + - const: ipa-setup-ready + + interconnects: + oneOf: + - items: + - description: Path leading to system memory + - description: Path between the AP and IPA config space + - items: + - description: Path leading to system memory + - description: Path leading to internal memory + - description: Path between the AP and IPA config space + + interconnect-names: + oneOf: + - items: + - const: memory + - const: config + - items: + - const: memory + - const: imem + - const: config + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the AOSS side-channel message RAM + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used in by the AP to signal the modem. + items: + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output + items: + - const: ipa-clock-enabled-valid + - const: ipa-clock-enabled + + qcom,gsi-loader: + enum: + - self + - modem + - skip + description: + Indicates how GSI firmware should be loaded. If the AP loads + and validates GSI firmware, this property has value "self". + If the modem does this, this property has value "modem". + Otherwise, "skip" means GSI firmware loading is not required. + + modem-init: + deprecated: true + type: boolean + description: + This is the older (deprecated) way of indicating how GSI firmware + should be loaded. If present, the modem loads GSI firmware; if + absent, the AP loads GSI firmware. + + memory-region: + maxItems: 1 + description: + If present, a phandle for a reserved memory area that holds + the firmware passed to Trust Zone for authentication. Required + when the AP (not the modem) performs early initialization. + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + If present, name (or relative path) of the file within the + firmware search path containing the firmware image used when + initializing IPA hardware. Optional, and only used when + Trust Zone performs early initialization. + +required: + - compatible + - iommus + - reg + - clocks + - interrupts + - interconnects + - qcom,smem-states + +allOf: + # If qcom,gsi-loader is present, modem-init must not be present + - if: + required: + - qcom,gsi-loader + then: + properties: + modem-init: false + + # If qcom,gsi-loader is "self", the AP loads GSI firmware, and + # memory-region must be specified + if: + properties: + qcom,gsi-loader: + contains: + const: self + then: + required: + - memory-region + else: + # If qcom,gsi-loader is not present, we use deprecated behavior. + # If modem-init is not present, the AP loads GSI firmware, and + # memory-region must be specified. + if: + not: + required: + - modem-init + then: + required: + - memory-region + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + smp2p-mpss { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + ipa@1e40000 { + compatible = "qcom,sc7180-ipa"; + + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e47000 0x2000>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = + <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml new file mode 100644 index 000000000000..3407e909e8a7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ40xx MDIO Controller + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +properties: + compatible: + oneOf: + - enum: + - qcom,ipq4019-mdio + - qcom,ipq5018-mdio + + - items: + - enum: + - qcom,ipq6018-mdio + - qcom,ipq8074-mdio + - const: qcom,ipq4019-mdio + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + minItems: 1 + maxItems: 2 + description: + the first Address and length of the register set for the MDIO controller. + the second Address and length of the register for ethernet LDO, this second + address range is only required by the platform IPQ50xx. + + clocks: + items: + - description: MDIO clock source frequency fixed to 100MHZ + + clock-names: + items: + - const: gcc_mdio_ahb_clk + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: mdio.yaml# + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-mdio + - qcom,ipq6018-mdio + - qcom,ipq8074-mdio + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + +unevaluatedProperties: false + +examples: + - | + mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq4019-mdio"; + reg = <0x90000 0x64>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml new file mode 100644 index 000000000000..164704338ef0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x MDIO bus controller + +maintainers: + - Ansuel Smith <ansuelsmth@gmail.com> + +description: + The ipq806x soc have a MDIO dedicated controller that is + used to communicate with the gmac phy connected. + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: qcom,ipq8064-mdio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + + mdio0: mdio@37000000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qcom,ipq8064-mdio"; + reg = <0x37000000 0x200000>; + + clocks = <&gcc GMAC_CORE1_CLK>; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* ... */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt index 346e6c7f47b7..7ae8aa148634 100644 --- a/Documentation/devicetree/bindings/net/qcom-emac.txt +++ b/Documentation/devicetree/bindings/net/qcom-emac.txt @@ -14,7 +14,7 @@ MAC node: - mac-address : The 6-byte MAC address. If present, it is the default MAC address. - internal-phy : phandle to the internal PHY node -- phy-handle : phandle the the external PHY node +- phy-handle : phandle to the external PHY node Internal PHY node: - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii". diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt deleted file mode 100644 index 68b67d9db63a..000000000000 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ /dev/null @@ -1,60 +0,0 @@ -Qualcomm Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Qualcomm devices. - -Serial attached Qualcomm devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - compatible: should contain one of the following: - * "qcom,qca6174-bt" - * "qcom,wcn3990-bt" - * "qcom,wcn3998-bt" - -Optional properties for compatible string qcom,qca6174-bt: - - - enable-gpios: gpio specifier used to enable chip - - clocks: clock provided to the controller (SUSCLK_32KHZ) - - firmware-name: specify the name of nvm firmware to load - -Required properties for compatible string qcom,wcn399x-bt: - - - vddio-supply: VDD_IO supply regulator handle. - - vddxo-supply: VDD_XO supply regulator handle. - - vddrf-supply: VDD_RF supply regulator handle. - - vddch0-supply: VDD_CH0 supply regulator handle. - -Optional properties for compatible string qcom,wcn399x-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt - - firmware-name: specify the name of nvm firmware to load - -Examples: - -serial@7570000 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - firmware-name = "nvm_00440302.bin"; - }; -}; - -serial@898000 { - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - firmware-name = "crnv21.bin"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt deleted file mode 100644 index 9fe1a0a22e44..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt +++ /dev/null @@ -1,59 +0,0 @@ -Ralink Frame Engine Ethernet controller -======================================= - -The Ralink frame engine ethernet controller can be found on Ralink and -Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). - -Depending on the SoC, there is a number of ports connected to the CPU port -directly and/or via a (gigabit-)switch. - -* Ethernet controller node - -Required properties: -- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", - "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", - "mediatek,mt7620-eth", "mediatek,mt7621-eth" -- reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt -- resets: Should contain the frame engines resets -- reset-names: Should contain the reset names "fe". If a switch is present - "esw" is also required. - - -* Ethernet port node - -Required properties: -- compatible: Should be "ralink,eth-port" -- reg: The number of the physical port -- phy-handle: reference to the node describing the phy - -Example: - -mdio-bus { - ... - phy0: ethernet-phy@0 { - phy-mode = "mii"; - reg = <0>; - }; -}; - -ethernet@400000 { - compatible = "ralink,rt2880-eth"; - reg = <0x00400000 10000>; - - #address-cells = <1>; - #size-cells = <0>; - - resets = <&rstctrl 18>; - reset-names = "fe"; - - interrupt-parent = <&cpuintc>; - interrupts = <5>; - - port@0 { - compatible = "ralink,eth-port"; - reg = <0>; - phy-handle = <&phy0>; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt deleted file mode 100644 index 87e315856efa..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt +++ /dev/null @@ -1,30 +0,0 @@ -Ralink Fast Ethernet Embedded Switch -==================================== - -The ralink fast ethernet embedded switch can be found on Ralink and Mediatek -SoCs (RT3x5x, RT5350, MT76x8). - -Required properties: -- compatible: Should be "ralink,rt3050-esw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the embedded switches interrupt -- resets: Should contain the embedded switches resets -- reset-names: Should contain the reset names "esw" - -Optional properties: -- ralink,portmap: can be used to choose if the default switch setup is - llllw or wllll -- ralink,led_polarity: override the active high/low settings of the leds - -Example: - -esw@10110000 { - compatible = "ralink,rt3050-esw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "esw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml new file mode 100644 index 000000000000..bb94a2388520 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL82xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for Realtek RTL82xx PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + realtek,clkout-disable: + type: boolean + description: + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. + + + realtek,aldps-enable: + type: boolean + description: + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + realtek,aldps-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml new file mode 100644 index 000000000000..043e118c605c --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth + +maintainers: + - Vasily Khoruzhick <anarsoul@gmail.com> + - Alistair Francis <alistair@alistair23.me> + +description: + RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + is connected over SDIO, while BT is connected over serial. It speaks + H5 protocol with few extra commands to upload firmware and change + module speed. + +properties: + compatible: + oneOf: + - enum: + - realtek,rtl8723bs-bt + - realtek,rtl8723cs-bt + - realtek,rtl8723ds-bt + - realtek,rtl8822cs-bt + - items: + - enum: + - realtek,rtl8821cs-bt + - const: realtek,rtl8723bs-bt + + device-wake-gpios: + maxItems: 1 + description: GPIO specifier, used to wakeup the BT module + + enable-gpios: + maxItems: 1 + description: GPIO specifier, used to enable the BT module + + host-wake-gpios: + maxItems: 1 + description: GPIO specifier, used to wakeup the host processor + + max-speed: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 7f84df9790e2..29355ab98569 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -10,7 +10,7 @@ allOf: - $ref: ethernet-controller.yaml# maintainers: - - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> + - Sergei Shtylyov <sergei.shtylyov@gmail.com> properties: compatible: @@ -29,8 +29,9 @@ properties: - renesas,rcar-gen1-ether # a generic R-Car Gen1 device - items: - enum: - - renesas,ether-r8a7745 # device is a part of R8A7745 SoC + - renesas,ether-r8a7742 # device is a part of R8A7742 SoC - renesas,ether-r8a7743 # device is a part of R8A7743 SoC + - renesas,ether-r8a7745 # device is a part of R8A7745 SoC - renesas,ether-r8a7790 # device is a part of R8A7790 SoC - renesas,ether-r8a7791 # device is a part of R8A7791 SoC - renesas,ether-r8a7793 # device is a part of R8A7793 SoC @@ -40,8 +41,8 @@ properties: reg: items: - - description: E-DMAC/feLic registers - - description: TSU registers + - description: E-DMAC/feLic registers + - description: TSU registers minItems: 1 interrupts: @@ -58,9 +59,15 @@ properties: clocks: maxItems: 1 - pinctrl-0: true + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phy-mode: true - pinctrl-names: true + phy-handle: true renesas,no-ether-link: type: boolean @@ -73,6 +80,10 @@ properties: specify when the Ether LINK signal is active-low instead of normal active-high +patternProperties: + "@[0-9a-f]$": + type: object + required: - compatible - reg @@ -82,33 +93,37 @@ required: - '#address-cells' - '#size-cells' - clocks - - pinctrl-0 + +additionalProperties: false examples: # Lager board - | - #include <dt-bindings/clock/r8a7790-clock.h> - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + #include <dt-bindings/gpio/gpio.h> ethernet@ee700000 { compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupt-parent = <&gic>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + reg = <0xee700000 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; phy-handle = <&phy1>; - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; renesas,ether-link-active-low; #address-cells = <1>; #size-cells = <0>; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&phy1_pins>; - pinctrl-names = "default"; + micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml new file mode 100644 index 000000000000..890f7858d0dc --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -0,0 +1,357 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Ethernet AVB + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,etheravb-r8a7742 # RZ/G1H + - renesas,etheravb-r8a7743 # RZ/G1M + - renesas,etheravb-r8a7744 # RZ/G1N + - renesas,etheravb-r8a7745 # RZ/G1E + - renesas,etheravb-r8a77470 # RZ/G1C + - renesas,etheravb-r8a7790 # R-Car H2 + - renesas,etheravb-r8a7791 # R-Car M2-W + - renesas,etheravb-r8a7792 # R-Car V2H + - renesas,etheravb-r8a7793 # R-Car M2-N + - renesas,etheravb-r8a7794 # R-Car E2 + - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,etheravb-r8a774a1 # RZ/G2M + - renesas,etheravb-r8a774b1 # RZ/G2N + - renesas,etheravb-r8a774c0 # RZ/G2E + - renesas,etheravb-r8a774e1 # RZ/G2H + - renesas,etheravb-r8a7795 # R-Car H3 + - renesas,etheravb-r8a7796 # R-Car M3-W + - renesas,etheravb-r8a77961 # R-Car M3-W+ + - renesas,etheravb-r8a77965 # R-Car M3-N + - renesas,etheravb-r8a77970 # R-Car V3M + - renesas,etheravb-r8a77980 # R-Car V3H + - renesas,etheravb-r8a77990 # R-Car E3 + - renesas,etheravb-r8a77995 # R-Car D3 + - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 + + - items: + - enum: + - renesas,etheravb-r8a779a0 # R-Car V3U + - renesas,etheravb-r8a779g0 # R-Car V4H + - const: renesas,etheravb-rcar-gen4 # R-Car Gen4 + + - items: + - enum: + - renesas,etheravb-r9a09g011 # RZ/V2M + - const: renesas,etheravb-rzv2m # RZ/V2M compatible + + - items: + - enum: + - renesas,r9a07g043-gbeth # RZ/G2UL and RZ/Five + - renesas,r9a07g044-gbeth # RZ/G2{L,LC} + - renesas,r9a07g054-gbeth # RZ/V2L + - renesas,r9a08g045-gbeth # RZ/G3S + - const: renesas,rzg2l-gbeth # RZ/{G2L,G2UL,V2L} family + + reg: true + + interrupts: true + + interrupt-names: true + + clocks: true + + clock-names: true + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phy-mode: true + + phy-handle: true + + '#address-cells': + description: Number of address cells for the MDIO bus. + const: 1 + + '#size-cells': + description: Number of size cells on the MDIO bus. + const: 0 + + renesas,no-ether-link: + type: boolean + description: + Specify when a board does not provide a proper AVB_LINK signal. + + renesas,ether-link-active-low: + type: boolean + description: + Specify when the AVB_LINK signal is active-low instead of normal + active-high. + + rx-internal-delay-ps: + enum: [0, 1800] + + tx-internal-delay-ps: + enum: [0, 2000] + +patternProperties: + "@[0-9a-f]$": + type: object + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - phy-mode + - phy-handle + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: ethernet-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,etheravb-rcar-gen2 + - renesas,etheravb-r8a7795 + - renesas,etheravb-r8a7796 + - renesas,etheravb-r8a77961 + - renesas,etheravb-r8a77965 + then: + properties: + reg: + items: + - description: MAC register block + - description: Stream buffer + else: + properties: + reg: + items: + - description: MAC register block + + - if: + properties: + compatible: + contains: + enum: + - renesas,etheravb-rcar-gen2 + - renesas,rzg2l-gbeth + then: + properties: + interrupts: + minItems: 1 + maxItems: 3 + interrupt-names: + minItems: 1 + items: + - const: mux + - const: fil + - const: arp_ns + rx-internal-delay-ps: false + else: + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + interrupts: + minItems: 29 + maxItems: 29 + interrupt-names: + items: + pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$' + rx-internal-delay-ps: false + required: + - interrupt-names + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps + + - if: + properties: + compatible: + contains: + enum: + - renesas,etheravb-r8a774a1 + - renesas,etheravb-r8a774b1 + - renesas,etheravb-r8a774e1 + - renesas,etheravb-r8a7795 + - renesas,etheravb-r8a7796 + - renesas,etheravb-r8a77961 + - renesas,etheravb-r8a77965 + - renesas,etheravb-r8a77970 + - renesas,etheravb-r8a77980 + - renesas,etheravb-rcar-gen4 + then: + required: + - tx-internal-delay-ps + else: + properties: + tx-internal-delay-ps: false + + - if: + properties: + compatible: + contains: + const: renesas,etheravb-r8a77995 + then: + properties: + rx-internal-delay-ps: + const: 1800 + + - if: + properties: + compatible: + contains: + const: renesas,etheravb-r8a77980 + then: + properties: + tx-internal-delay-ps: + const: 2000 + + - if: + properties: + compatible: + contains: + const: renesas,rzg2l-gbeth + then: + properties: + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Reference clock for RGMII + clock-names: + items: + - const: axi + - const: chi + - const: refclk + else: + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + clocks: + items: + - description: Main clock + - description: Coherent Hub Interface clock + - description: gPTP reference clock + clock-names: + items: + - const: axi + - const: chi + - const: gptp + else: + properties: + clocks: + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + #include <dt-bindings/gpio/gpio.h> + aliases { + ethernet0 = &avb; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7795", + "renesas,etheravb-rcar-gen3"; + reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", + "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", + "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", + "ch19", "ch20", "ch21", "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; + iommus = <&ipmmu_ds0 16>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml new file mode 100644 index 000000000000..475aff7714d6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Ethernet TSN End-station + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1 + Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a779g0-ethertsn # R-Car V4H + - const: renesas,rcar-gen4-ethertsn + + reg: + items: + - description: TSN End Station target + - description: generalized Precision Time Protocol target + + reg-names: + items: + - const: tsnes + - const: gptp + + interrupts: + items: + - description: TX data interrupt + - description: RX data interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phy-mode: + contains: + enum: + - mii + - rgmii + + phy-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PHY device. + + rx-internal-delay-ps: + enum: [0, 1800] + + tx-internal-delay-ps: + enum: [0, 2000] + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + - phy-mode + - phy-handle + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + #include <dt-bindings/gpio/gpio.h> + + tsn0: ethernet@e6460000 { + compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn"; + reg = <0xe6460000 0x7000>, + <0xe6449000 0x500>; + reg-names = "tsnes", "gptp"; + interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + clocks = <&cpg CPG_MOD 2723>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 2723>; + + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + phy-handle = <&phy3>; + + #address-cells = <1>; + #size-cells = <0>; + + phy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml new file mode 100644 index 000000000000..e933a1e48d67 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml @@ -0,0 +1,262 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,r8a779f0-ether-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Ethernet Switch + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + const: renesas,r8a779f0-ether-switch + + reg: + maxItems: 2 + + reg-names: + items: + - const: base + - const: secure_base + + interrupts: + maxItems: 47 + + interrupt-names: + items: + - const: mfwd_error + - const: race_error + - const: coma_error + - const: gwca0_error + - const: gwca1_error + - const: etha0_error + - const: etha1_error + - const: etha2_error + - const: gptp0_status + - const: gptp1_status + - const: mfwd_status + - const: race_status + - const: coma_status + - const: gwca0_status + - const: gwca1_status + - const: etha0_status + - const: etha1_status + - const: etha2_status + - const: rmac0_status + - const: rmac1_status + - const: rmac2_status + - const: gwca0_rxtx0 + - const: gwca0_rxtx1 + - const: gwca0_rxtx2 + - const: gwca0_rxtx3 + - const: gwca0_rxtx4 + - const: gwca0_rxtx5 + - const: gwca0_rxtx6 + - const: gwca0_rxtx7 + - const: gwca1_rxtx0 + - const: gwca1_rxtx1 + - const: gwca1_rxtx2 + - const: gwca1_rxtx3 + - const: gwca1_rxtx4 + - const: gwca1_rxtx5 + - const: gwca1_rxtx6 + - const: gwca1_rxtx7 + - const: gwca0_rxts0 + - const: gwca0_rxts1 + - const: gwca1_rxts0 + - const: gwca1_rxts1 + - const: rmac0_mdio + - const: rmac1_mdio + - const: rmac2_mdio + - const: rmac0_phy + - const: rmac1_phy + - const: rmac2_phy + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + iommus: + maxItems: 16 + + power-domains: + maxItems: 1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + description: Port number of ETHA (TSNA). + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^port@[0-9a-f]+$": + type: object + $ref: /schemas/net/ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: + Port number of ETHA (TSNA). + + phys: + maxItems: 1 + description: + Phandle of an Ethernet SERDES. + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + required: + - reg + - phy-handle + - phy-mode + - phys + - mdio + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - resets + - power-domains + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779f0-sysc.h> + + ethernet@e6880000 { + compatible = "renesas,r8a779f0-ether-switch"; + reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>; + reg-names = "base", "secure_base"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mfwd_error", "race_error", + "coma_error", "gwca0_error", + "gwca1_error", "etha0_error", + "etha1_error", "etha2_error", + "gptp0_status", "gptp1_status", + "mfwd_status", "race_status", + "coma_status", "gwca0_status", + "gwca1_status", "etha0_status", + "etha1_status", "etha2_status", + "rmac0_status", "rmac1_status", + "rmac2_status", + "gwca0_rxtx0", "gwca0_rxtx1", + "gwca0_rxtx2", "gwca0_rxtx3", + "gwca0_rxtx4", "gwca0_rxtx5", + "gwca0_rxtx6", "gwca0_rxtx7", + "gwca1_rxtx0", "gwca1_rxtx1", + "gwca1_rxtx2", "gwca1_rxtx3", + "gwca1_rxtx4", "gwca1_rxtx5", + "gwca1_rxtx6", "gwca1_rxtx7", + "gwca0_rxts0", "gwca0_rxts1", + "gwca1_rxts0", "gwca1_rxts1", + "rmac0_mdio", "rmac1_mdio", + "rmac2_mdio", + "rmac0_phy", "rmac1_phy", + "rmac2_phy"; + clocks = <&cpg CPG_MOD 1505>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1505>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "sgmii"; + phys = <ð_serdes 0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "sgmii"; + phys = <ð_serdes 1>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + port@2 { + reg = <2>; + phy-handle = <ð_phy2>; + phy-mode = "sgmii"; + phys = <ð_serdes 2>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt deleted file mode 100644 index 5df4aa7f6811..000000000000 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ /dev/null @@ -1,132 +0,0 @@ -* Renesas Electronics Ethernet AVB - -This file provides information on what the device node for the Ethernet AVB -interface contains. - -Required properties: -- compatible: Must contain one or more of the following: - - "renesas,etheravb-r8a7743" for the R8A7743 SoC. - - "renesas,etheravb-r8a7744" for the R8A7744 SoC. - - "renesas,etheravb-r8a7745" for the R8A7745 SoC. - - "renesas,etheravb-r8a77470" for the R8A77470 SoC. - - "renesas,etheravb-r8a7790" for the R8A7790 SoC. - - "renesas,etheravb-r8a7791" for the R8A7791 SoC. - - "renesas,etheravb-r8a7792" for the R8A7792 SoC. - - "renesas,etheravb-r8a7793" for the R8A7793 SoC. - - "renesas,etheravb-r8a7794" for the R8A7794 SoC. - - "renesas,etheravb-rcar-gen2" as a fallback for the above - R-Car Gen2 and RZ/G1 devices. - - - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. - - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC. - - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. - - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - - "renesas,etheravb-r8a77965" for the R8A77965 SoC. - - "renesas,etheravb-r8a77970" for the R8A77970 SoC. - - "renesas,etheravb-r8a77980" for the R8A77980 SoC. - - "renesas,etheravb-r8a77990" for the R8A77990 SoC. - - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - - "renesas,etheravb-rcar-gen3" as a fallback for the above - R-Car Gen3 and RZ/G2 devices. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first followed by - the generic version. - -- reg: Offset and length of (1) the register block and (2) the stream buffer. - The region for the register block is mandatory. - The region for the stream buffer is optional, as it is only present on - R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796), - and M3-N (R8A77965). -- interrupts: A list of interrupt-specifiers, one for each entry in - interrupt-names. - If interrupt-names is not present, an interrupt specifier - for a single muxed interrupt. -- phy-mode: see ethernet.txt file in the same directory. -- phy-handle: see ethernet.txt file in the same directory. -- #address-cells: number of address cells for the MDIO bus, must be equal to 1. -- #size-cells: number of size cells on the MDIO bus, must be equal to 0. -- clocks: clock phandle and specifier pair. -- pinctrl-0: phandle, referring to a default pin configuration node. - -Optional properties: -- interrupt-names: A list of interrupt names. - For the R-Car Gen 3 SoCs this property is mandatory; - it should include one entry per channel, named "ch%u", - where %u is the channel number ranging from 0 to 24. - For other SoCs this property is optional; if present - it should contain "mux" for a single muxed interrupt. -- pinctrl-names: pin configuration state name ("default"). -- renesas,no-ether-link: boolean, specify when a board does not provide a proper - AVB_LINK signal. -- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is - active-low instead of normal active-high. - -Example: - - ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15", - "ch16", "ch17", "ch18", "ch19", - "ch20", "ch21", "ch22", "ch23", - "ch24"; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&cpg>; - phy-mode = "rgmii-id"; - phy-handle = <&phy0>; - - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml new file mode 100644 index 000000000000..9630c8466fac --- /dev/null +++ b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/rfkill-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled rfkill switch + +maintainers: + - Johannes Berg <johannes@sipsolutions.net> + - Philipp Zabel <p.zabel@pengutronix.de> + +properties: + compatible: + const: rfkill-gpio + + label: + description: rfkill switch name, defaults to node name + + radio-type: + description: rfkill radio type + enum: + - bluetooth + - fm + - gps + - nfc + - ultrawideband + - wimax + - wlan + - wwan + + shutdown-gpios: + maxItems: 1 + +required: + - compatible + - radio-type + - shutdown-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-pcie-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml new file mode 100644 index 000000000000..364028b3bba4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/rockchip,emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3036-emac + - rockchip,rk3066-emac + - rockchip,rk3188-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: host clock + - description: reference clock + - description: mac TX/RX clock + + clock-names: + minItems: 2 + items: + - const: hclk + - const: macref + - const: macclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon GRF used to control speed and mode for the EMAC. + + phy-supply: + description: + Phandle to a regulator if the PHY needs one. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - rockchip,grf + - phy + - phy-mode + - mdio + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: rockchip,rk3036-emac + + then: + properties: + clocks: + minItems: 3 + + clock-names: + minItems: 3 + + else: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@10204000 { + compatible = "rockchip,rk3188-emac"; + reg = <0xc0fc2000 0x3c>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref"; + rockchip,grf = <&grf>; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rmii"; + phy-supply = <&vcc_rmii>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt deleted file mode 100644 index 3b71da7e8742..000000000000 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ /dev/null @@ -1,76 +0,0 @@ -Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC) - -The device node has following properties. - -Required properties: - - compatible: should be "rockchip,<name>-gamc" - "rockchip,px30-gmac": found on PX30 SoCs - "rockchip,rk3128-gmac": found on RK312x SoCs - "rockchip,rk3228-gmac": found on RK322x SoCs - "rockchip,rk3288-gmac": found on RK3288 SoCs - "rockchip,rk3328-gmac": found on RK3328 SoCs - "rockchip,rk3366-gmac": found on RK3366 SoCs - "rockchip,rk3368-gmac": found on RK3368 SoCs - "rockchip,rk3399-gmac": found on RK3399 SoCs - "rockchip,rv1108-gmac": found on RV1108 SoCs - - reg: addresses and length of the register sets for the device. - - interrupts: Should contain the GMAC interrupts. - - interrupt-names: Should contain the interrupt names "macirq". - - rockchip,grf: phandle to the syscon grf used to control speed and mode. - - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY. - <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC - <&cru SCLK_MAC_RX>: clock gate for RX - <&cru SCLK_MAC_TX>: clock gate for TX - <&cru SCLK_MACREF>: clock gate for RMII referce clock - <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output - <&cru ACLK_GMAC>: AXI clock gate for GMAC - <&cru PCLK_GMAC>: APB clock gate for GMAC - - clock-names: One name for each entry in the clocks property. - - phy-mode: See ethernet.txt file in the same directory. - - pinctrl-names: Names corresponding to the numbered pinctrl states. - - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>. - - clock_in_out: For RGMII, it must be "input", means main clock(125MHz) - is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means - PHY provides the reference clock(50MHz), "output" means GMAC provides the - reference clock. - - snps,reset-gpio gpio number for phy reset. - - snps,reset-active-low boolean flag to indicate if phy reset is active low. - - assigned-clocks: main clock, should be <&cru SCLK_MAC>; - - assigned-clock-parents = parent of main clock. - can be <&ext_gmac> or <&cru SCLK_MAC_PLL>. - -Optional properties: - - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. - - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. - - phy-supply: phandle to a regulator if the PHY needs one - -Example: - -gmac: ethernet@ff290000 { - compatible = "rockchip,rk3288-gmac"; - reg = <0xff290000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_MAC>, - <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, - <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, - <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; - clock-names = "stmmaceth", - "mac_clk_rx", "mac_clk_tx", - "clk_mac_ref", "clk_mac_refout", - "aclk_mac", "pclk_mac"; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>; - - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - tx_delay = <0x30>; - rx_delay = <0x10>; - -}; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml new file mode 100644 index 000000000000..70bbc4220e2a --- /dev/null +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip 10/100/1000 Ethernet driver(GMAC) + +maintainers: + - David Wu <david.wu@rock-chips.com> + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3308-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rk3568-gmac + - rockchip,rk3588-gmac + - rockchip,rv1108-gmac + - rockchip,rv1126-gmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3308-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + - items: + - enum: + - rockchip,rk3568-gmac + - rockchip,rk3588-gmac + - rockchip,rv1126-gmac + - const: snps,dwmac-4.20a + + clocks: + minItems: 5 + maxItems: 8 + + clock-names: + contains: + enum: + - stmmaceth + - mac_clk_tx + - mac_clk_rx + - aclk_mac + - pclk_mac + - clk_mac_ref + - clk_mac_refout + - clk_mac_speed + + clock_in_out: + description: + For RGMII, it must be "input", means main clock(125MHz) + is not sourced from SoC's PLL, but input from PHY. + For RMII, "input" means PHY provides the reference clock(50MHz), + "output" means GMAC provides the reference clock. + $ref: /schemas/types.yaml#/definitions/string + enum: [input, output] + default: input + + rockchip,grf: + description: The phandle of the syscon node for the general register file. + $ref: /schemas/types.yaml#/definitions/phandle + + rockchip,php-grf: + description: + The phandle of the syscon node for the peripheral general register file. + $ref: /schemas/types.yaml#/definitions/phandle + + tx_delay: + description: Delay value for TXD timing. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x30 + + rx_delay: + description: Delay value for RXD timing. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x10 + + phy-supply: + description: PHY regulator + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3288-cru.h> + + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3288-gmac"; + reg = <0xff290000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + + rockchip,grf = <&grf>; + phy-mode = "rgmii"; + clock_in_out = "input"; + tx_delay = <0x30>; + rx_delay = <0x10>; + }; diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt index 2cff6d8a585a..b9381b761a27 100644 --- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt +++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt @@ -5,10 +5,10 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain the SXGBE interrupts These interrupts are ordered by fixed and follows variable - trasmit DMA interrupts, receive DMA interrupts and lpi interrupt. + transmit DMA interrupts, receive DMA interrupts and lpi interrupt. index 0 - this is fixed common interrupt of SXGBE and it is always available. - index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts + index 1 to 25 - 8 variable transmit interrupts, variable 16 receive interrupts and 1 optional lpi interrupt. - phy-mode: String, operation mode of the PHY interface. Supported values are: "sgmii", "xgmii". diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt deleted file mode 100644 index 832139919f20..000000000000 --- a/Documentation/devicetree/bindings/net/sff,sfp.txt +++ /dev/null @@ -1,85 +0,0 @@ -Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) -Transceiver - -Required properties: - -- compatible : must be one of - "sff,sfp" for SFP modules - "sff,sff" for soldered down SFF modules - -- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial - interface - -Optional Properties: - -- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) - module presence input gpio signal, active (module absent) high. Must - not be present for SFF modules - -- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal - Indication input gpio signal, active (signal lost) high - -- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter - Fault input gpio signal, active (fault condition) high - -- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable - output gpio signal, active (Tx disable) high - -- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate - Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate - Must not be present for SFF modules - -- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate - Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high: - high Tx rate. Must not be present for SFF modules - -- maximum-power-milliwatt : Maximum module power consumption - Specifies the maximum power consumption allowable by a module in the - slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - -Example #1: Direct serdes to SFP connection - -sfp_eth3: sfp-eth3 { - compatible = "sff,sfp"; - i2c-bus = <&sfp_1g_i2c>; - los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>; - maximum-power-milliwatt = <1000>; - pinctrl-names = "default"; - pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>; - tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>; -}; - -&cps_emac3 { - phy-names = "comphy"; - phys = <&cps_comphy5 0>; - sfp = <&sfp_eth3>; -}; - -Example #2: Serdes to PHY to SFP connection - -sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&sfpp0_i2c>; - los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cps_sfpp0_pins>; - tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; -}; - -p0_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - pinctrl-names = "default"; - pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>; - reg = <0>; - interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>; - sfp = <&sfp_eth0>; -}; - -&cpm_eth0 { - phy = <&p0_phy>; - phy-mode = "10gbase-kr"; -}; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml new file mode 100644 index 000000000000..bf6cbc7c2ba3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sff,sfp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) + Transceiver + +maintainers: + - Russell King <linux@armlinux.org.uk> + +properties: + compatible: + enum: + - sff,sfp # for SFP modules + - sff,sff # for soldered down SFF modules + + i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of an I2C bus controller for the SFP two wire serial + + maximum-power-milliwatt: + minimum: 1000 + default: 1000 + description: + Maximum module power consumption Specifies the maximum power consumption + allowable by a module in the slot, in milli-Watts. Presently, modules can + be up to 1W, 1.5W or 2W. + + "mod-def0-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module + presence input gpio signal, active (module absent) high. Must not be + present for SFF modules + + "los-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the Receiver Loss of Signal Indication + input gpio signal, active (signal lost) high + + "tx-fault-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the Module Transmitter Fault input gpio + signal, active (fault condition) high + + "tx-disable-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the Transmitter Disable output gpio + signal, active (Tx disable) high + + "rate-select0-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) + output gpio signal, low - low Rx rate, high - high Rx rate Must not be + present for SFF modules + + "rate-select1-gpios": + maxItems: 1 + description: + GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) + output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must + not be present for SFF modules + +allOf: + - if: + properties: + compatible: + contains: + const: sff,sff + then: + properties: + mod-def0-gpios: false + rate-select0-gpios: false + rate-select1-gpios: false + +required: + - compatible + - i2c-bus + +additionalProperties: false + +examples: + - | # Direct serdes to SFP connection + #include <dt-bindings/gpio/gpio.h> + + sfp1: sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <1000>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>; + tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>; + }; + + ethernet { + phy-names = "comphy"; + phys = <&cps_comphy5 0>; + sfp = <&sfp1>; + }; + + - | # Serdes to PHY to SFP connection + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sfp2: sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c>; + los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cps_sfpp0_pins>; + tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>; + reg = <0>; + interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>; + sfp = <&sfp2>; + }; + }; + + ethernet { + phy = <&phy>; + phy-mode = "10gbase-kr"; + }; diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml new file mode 100644 index 000000000000..f86667cbcca8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: smsc,lan9115 + - items: + - enum: + - smsc,lan89218 + - smsc,lan9117 + - smsc,lan9118 + - smsc,lan9220 + - smsc,lan9221 + - const: smsc,lan9115 + + reg: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 2, 4 ] + default: 2 + + interrupts: + minItems: 1 + items: + - description: + LAN interrupt line + - description: + Optional PME (power management event) interrupt that is able to wake + up the host system with a 50ms pulse on network activity + + clocks: + maxItems: 1 + + phy-mode: true + + smsc,irq-active-high: + type: boolean + description: Indicates the IRQ polarity is active-high + + smsc,irq-push-pull: + type: boolean + description: Indicates the IRQ type is push-pull + + smsc,force-internal-phy: + type: boolean + description: Forces SMSC LAN controller to use internal PHY + + smsc,force-external-phy: + type: boolean + description: Forces SMSC LAN controller to use external PHY + + smsc,save-mac-address: + type: boolean + description: + Indicates that MAC address needs to be saved before resetting the + controller + + reset-gpios: + maxItems: 1 + description: + A GPIO line connected to the RESET (active low) signal of the device. + On many systems this is wired high so the device goes out of reset at + power-on, but if it is under program control, this optional GPIO can + wake up in response to it. + + vdd33a-supply: + description: 3.3V analog power supply + + vddvario-supply: + description: IO logic power supply + +required: + - compatible + - reg + - interrupts + +# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*", +# "gpmc,*", ...) to be found, that actually depend on the compatible value of +# the parent node. +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + ethernet@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>, <32>; + reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,irq-push-pull; + }; diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml new file mode 100644 index 000000000000..6df533162632 --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller + +maintainers: + - Nicolas Pitre <nico@fluxnic.net> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: smsc,lan91c111 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 1, 2, 4 ] + default: 4 + + reset-gpios: + description: GPIO connected to control RESET pin + maxItems: 1 + + power-gpios: + description: GPIO connect to control PWRDWN pin + maxItems: 1 + + pxa-u16-align4: + description: put in place the workaround the force all u16 writes to be + 32 bits aligned + type: boolean + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 8b7c719b0bb9..a8d0dc9a8c0e 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -5,6 +5,10 @@ through an Ethernet OF device node. Optional properties: +- clocks: + The clock used as phy reference clock and is connected to phy + pin XTAL1/CLKIN. + - smsc,disable-energy-detect: If set, do not enable energy detect mode for the SMSC phy. default: enable energy detect mode diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt deleted file mode 100644 index 309e37eb7c7c..000000000000 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ /dev/null @@ -1,17 +0,0 @@ -SMSC LAN91c111 Ethernet mac - -Required properties: -- compatible = "smsc,lan91c111"; -- reg : physical address and size of registers -- interrupts : interrupt connection - -Optional properties: -- phy-device : see ethernet.txt file in the same directory -- reg-io-width : Mask of sizes (in bytes) of the IO accesses that - are supported on the device. Valid value for SMSC LAN91c111 are - 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning - 16-bit access only. -- power-gpios: GPIO to control the PWRDWN pin -- reset-gpios: GPIO to control the RESET pin -- pxa-u16-align4 : Boolean, put in place the workaround the force all - u16 writes to be 32 bits aligned diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt deleted file mode 100644 index acfafc8e143c..000000000000 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller - -Required properties: -- compatible : Should be "smsc,lan<model>", "smsc,lan9115" -- reg : Address and length of the io space for SMSC LAN -- interrupts : one or two interrupt specifiers - - The first interrupt is the SMSC LAN interrupt line - - The second interrupt (if present) is the PME (power - management event) interrupt that is able to wake up the host - system with a 50ms pulse on network activity -- phy-mode : See ethernet.txt file in the same directory - -Optional properties: -- reg-shift : Specify the quantity to shift the register offsets by -- reg-io-width : Specify the size (in bytes) of the IO accesses that - should be performed on the device. Valid value for SMSC LAN is - 2 or 4. If it's omitted or invalid, the size would be 2. -- smsc,irq-active-high : Indicates the IRQ polarity is active-high -- smsc,irq-push-pull : Indicates the IRQ type is push-pull -- smsc,force-internal-phy : Forces SMSC LAN controller to use - internal PHY -- smsc,force-external-phy : Forces SMSC LAN controller to use - external PHY -- smsc,save-mac-address : Indicates that mac address needs to be saved - before resetting the controller -- reset-gpios : a GPIO line connected to the RESET (active low) signal - of the device. On many systems this is wired high so the device goes - out of reset at power-on, but if it is under program control, this - optional GPIO can wake up in response to it. -- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies - -Examples: - -lan9220@f4000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0xf4000000 0x2000000>; - phy-mode = "mii"; - interrupt-parent = <&gpio1>; - interrupts = <31>, <32>; - reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - reg-io-width = <4>; - smsc,irq-push-pull; -}; diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt index ad3c6e109ce1..bb0224a3e826 100644 --- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -110,7 +110,7 @@ Optional properties: It depends on the SoC configuration. - snps,read-requests: Number of read requests that the AXI port can issue. It depends on the SoC configuration. -- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB +- snps,burst-map: Bitmap of allowed AXI burst lengths, with the LSB representing 4, then 8 etc. - snps,txpbl: DMA Programmable burst length for the TX DMA - snps,rxpbl: DMA Programmable burst length for the RX DMA diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4845e29411e4..5c2769dc689a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Synopsys DesignWare MAC Device Tree Bindings +title: Synopsys DesignWare MAC maintainers: - - Alexandre Torgue <alexandre.torgue@st.com> + - Alexandre Torgue <alexandre.torgue@foss.st.com> - Giuseppe Cavallaro <peppe.cavallaro@st.com> - Jose Abreu <joabreu@synopsys.com> @@ -21,12 +21,16 @@ select: contains: enum: - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a + - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 @@ -47,7 +51,7 @@ properties: - allwinner,sun7i-a20-gmac - allwinner,sun8i-a83t-emac - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-emac + - allwinner,sun8i-r40-gmac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac - amlogic,meson6-dwmac @@ -55,15 +59,43 @@ properties: - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos + - renesas,r9a06g032-gmac + - renesas,rzn1-gmac + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3588-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a + - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 + - starfive,jh7110-dwmac reg: minItems: 1 @@ -71,7 +103,6 @@ properties: interrupts: minItems: 1 - maxItems: 3 items: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection @@ -79,15 +110,15 @@ properties: interrupt-names: minItems: 1 - maxItems: 3 items: - const: macirq - - const: eth_wake_irq + - enum: [eth_wake_irq, eth_lpi] - const: eth_lpi clocks: minItems: 1 - maxItems: 3 + maxItems: 8 + additionalItems: true items: - description: GMAC main clock - description: Peripheral registers interface clock @@ -97,6 +128,8 @@ properties: clock will be used and this is fine on some platforms. clock-names: + minItems: 1 + maxItems: 8 additionalItems: true contains: enum: @@ -105,12 +138,19 @@ properties: - ptp_ref resets: - maxItems: 1 - description: - MAC Reset signal. + minItems: 1 + items: + - description: GMAC stmmaceth reset + - description: AHB reset reset-names: - const: stmmaceth + minItems: 1 + items: + - const: stmmaceth + - const: ahb + + power-domains: + maxItems: 1 mac-mode: $ref: ethernet-controller.yaml#/properties/phy-connection-type @@ -121,7 +161,7 @@ properties: in a different mode than the PHY in order to function. snps,axi-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: AXI BUS Mode parameters. Phandle to a node that can contain the following properties @@ -136,54 +176,245 @@ properties: * snps,rb, rebuild INCRx Burst snps,mtl-rx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: - Multiple RX Queues parameters. Phandle to a node that can - contain the following properties - * snps,rx-queues-to-use, number of RX queues to be used in the - driver - * Choose one of these RX scheduling algorithms - * snps,rx-sched-sp, Strict priority - * snps,rx-sched-wsp, Weighted Strict priority - * For each RX queue - * Choose one of these modes - * snps,dcb-algorithm, Queue to be enabled as DCB - * snps,avb-algorithm, Queue to be enabled as AVB - * snps,map-to-dma-channel, Channel to map - * Specifiy specific packet routing - * snps,route-avcp, AV Untagged Control packets - * snps,route-ptp, PTP Packets - * snps,route-dcbcp, DCB Control Packets - * snps,route-up, Untagged Packets - * snps,route-multi-broad, Multicast & Broadcast Packets - * snps,priority, RX queue priority (Range 0x0 to 0xF) + Multiple RX Queues parameters. Phandle to a node that + implements the 'rx-queues-config' object described in + this binding. + + rx-queues-config: + type: object + properties: + snps,rx-queues-to-use: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of RX queues to be used in the driver + snps,rx-sched-sp: + type: boolean + description: Strict priority + snps,rx-sched-wsp: + type: boolean + description: Weighted Strict priority + allOf: + - if: + required: + - snps,rx-sched-sp + then: + properties: + snps,rx-sched-wsp: false + - if: + required: + - snps,rx-sched-wsp + then: + properties: + snps,rx-sched-sp: false + patternProperties: + "^queue[0-9]$": + description: Each subnode represents a queue. + type: object + properties: + snps,dcb-algorithm: + type: boolean + description: Queue to be enabled as DCB + snps,avb-algorithm: + type: boolean + description: Queue to be enabled as AVB + snps,map-to-dma-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: DMA channel id to map + snps,route-avcp: + type: boolean + description: AV Untagged Control packets + snps,route-ptp: + type: boolean + description: PTP Packets + snps,route-dcbcp: + type: boolean + description: DCB Control Packets + snps,route-up: + type: boolean + description: Untagged Packets + snps,route-multi-broad: + type: boolean + description: Multicast & Broadcast Packets + snps,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bitmask of the tagged frames priorities assigned to the queue + allOf: + - if: + required: + - snps,dcb-algorithm + then: + properties: + snps,avb-algorithm: false + - if: + required: + - snps,avb-algorithm + then: + properties: + snps,dcb-algorithm: false + - if: + required: + - snps,route-avcp + then: + properties: + snps,route-ptp: false + snps,route-dcbcp: false + snps,route-up: false + snps,route-multi-broad: false + - if: + required: + - snps,route-ptp + then: + properties: + snps,route-avcp: false + snps,route-dcbcp: false + snps,route-up: false + snps,route-multi-broad: false + - if: + required: + - snps,route-dcbcp + then: + properties: + snps,route-avcp: false + snps,route-ptp: false + snps,route-up: false + snps,route-multi-broad: false + - if: + required: + - snps,route-up + then: + properties: + snps,route-avcp: false + snps,route-ptp: false + snps,route-dcbcp: false + snps,route-multi-broad: false + - if: + required: + - snps,route-multi-broad + then: + properties: + snps,route-avcp: false + snps,route-ptp: false + snps,route-dcbcp: false + snps,route-up: false + additionalProperties: false + additionalProperties: false snps,mtl-tx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: - Multiple TX Queues parameters. Phandle to a node that can - contain the following properties - * snps,tx-queues-to-use, number of TX queues to be used in the - driver - * Choose one of these TX scheduling algorithms - * snps,tx-sched-wrr, Weighted Round Robin - * snps,tx-sched-wfq, Weighted Fair Queuing - * snps,tx-sched-dwrr, Deficit Weighted Round Robin - * snps,tx-sched-sp, Strict priority - * For each TX queue - * snps,weight, TX queue weight (if using a DCB weight - algorithm) - * Choose one of these modes - * snps,dcb-algorithm, TX queue will be working in DCB - * snps,avb-algorithm, TX queue will be working in AVB - [Attention] Queue 0 is reserved for legacy traffic - and so no AVB is available in this queue. - * Configure Credit Base Shaper (if AVB Mode selected) - * snps,send_slope, enable Low Power Interface - * snps,idle_slope, unlock on WoL - * snps,high_credit, max write outstanding req. limit - * snps,low_credit, max read outstanding req. limit - * snps,priority, TX queue priority (Range 0x0 to 0xF) + Multiple TX Queues parameters. Phandle to a node that + implements the 'tx-queues-config' object described in + this binding. + + tx-queues-config: + type: object + properties: + snps,tx-queues-to-use: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of TX queues to be used in the driver + snps,tx-sched-wrr: + type: boolean + description: Weighted Round Robin + snps,tx-sched-wfq: + type: boolean + description: Weighted Fair Queuing + snps,tx-sched-dwrr: + type: boolean + description: Deficit Weighted Round Robin + snps,tx-sched-sp: + type: boolean + description: Strict priority + allOf: + - if: + required: + - snps,tx-sched-wrr + then: + properties: + snps,tx-sched-wfq: false + snps,tx-sched-dwrr: false + snps,tx-sched-sp: false + - if: + required: + - snps,tx-sched-wfq + then: + properties: + snps,tx-sched-wrr: false + snps,tx-sched-dwrr: false + snps,tx-sched-sp: false + - if: + required: + - snps,tx-sched-dwrr + then: + properties: + snps,tx-sched-wrr: false + snps,tx-sched-wfq: false + snps,tx-sched-sp: false + - if: + required: + - snps,tx-sched-sp + then: + properties: + snps,tx-sched-wrr: false + snps,tx-sched-wfq: false + snps,tx-sched-dwrr: false + patternProperties: + "^queue[0-9]$": + description: Each subnode represents a queue. + type: object + properties: + snps,weight: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TX queue weight (if using a DCB weight algorithm) + snps,dcb-algorithm: + type: boolean + description: TX queue will be working in DCB + snps,avb-algorithm: + type: boolean + description: + TX queue will be working in AVB. + Queue 0 is reserved for legacy traffic and so no AVB is + available in this queue. + snps,send_slope: + $ref: /schemas/types.yaml#/definitions/uint32 + description: enable Low Power Interface + snps,idle_slope: + $ref: /schemas/types.yaml#/definitions/uint32 + description: unlock on WoL + snps,high_credit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: max write outstanding req. limit + snps,low_credit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: max read outstanding req. limit + snps,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask of the tagged frames priorities assigned to the queue. + When a PFC frame is received with priorities matching the bitmask, + the queue is blocked from transmitting for the pause time specified + in the PFC frame. + + snps,coe-unsupported: + type: boolean + description: TX checksum offload is unsupported by the TX queue. + + allOf: + - if: + required: + - snps,dcb-algorithm + then: + properties: + snps,avb-algorithm: false + - if: + required: + - snps,avb-algorithm + then: + properties: + snps,dcb-algorithm: false + snps,weight: false + additionalProperties: false + additionalProperties: false snps,reset-gpio: deprecated: true @@ -193,73 +424,77 @@ properties: snps,reset-active-low: deprecated: true - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the PHY Reset is active low snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + minItems: 3 + maxItems: 3 snps,aal: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Use Address-Aligned Beats snps,fixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the fixed burst mode snps,mixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the mixed burst mode snps,force_thresh_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the threshold mode for both tx and rx snps,force_sf_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. snps,en-tx-lpi-clockgating: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enable gating of the MAC TX clock during TX low-power mode snps,multicast-filter-bins: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of multicast filter hash bins supported by this device instance snps,perfect-filter-entries: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of perfect filter entries supported by this device instance snps,ps-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and MAC2MAC connection. + snps,clk-csr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Frequency division factor for MDC clock. + mdio: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: Creates and registers an MDIO bus. @@ -270,6 +505,60 @@ properties: required: - compatible + stmmac-axi-config: + type: object + unevaluatedProperties: false + description: + AXI BUS Mode parameters. + + properties: + snps,lpi_en: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable Low Power Interface + + snps,xit_frm: + $ref: /schemas/types.yaml#/definitions/flag + description: + unlock on WoL + + snps,wr_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max write outstanding req. limit + + snps,rd_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max read outstanding req. limit + + snps,kbbe: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + do not cross 1KiB boundary. + + snps,blen: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + this is a vector of supported burst length. + minItems: 7 + maxItems: 7 + + snps,fb: + $ref: /schemas/types.yaml#/definitions/flag + description: + fixed-burst + + snps,mb: + $ref: /schemas/types.yaml#/definitions/flag + description: + mixed-burst + + snps,rb: + $ref: /schemas/types.yaml#/definitions/flag + description: + rebuild INCRx Burst + required: - compatible - reg @@ -279,10 +568,10 @@ required: dependencies: snps,reset-active-low: ["snps,reset-gpio"] - snps,reset-delay-us: ["snps,reset-gpio"] + snps,reset-delays-us: ["snps,reset-gpio"] allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: @@ -291,9 +580,20 @@ allOf: - allwinner,sun7i-a20-gmac - allwinner,sun8i-a83t-emac - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-emac + - allwinner,sun8i-r40-gmac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - snps,dwmac-3.50a + - snps,dwmac-4.10a + - snps,dwmac-4.20a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -301,30 +601,27 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] snps,no-pbl-x8: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core rev < 3.50, don\'t multiply the values by 4. @@ -337,59 +634,41 @@ allOf: - allwinner,sun7i-a20-gmac - allwinner,sun8i-a83t-emac - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-emac + - allwinner,sun8i-r40-gmac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a + - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac then: + properties: snps,tso: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enables the TSO feature otherwise it will be managed by MAC HW capability register. +additionalProperties: true + examples: - | - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <0xf>; - snps,rd_osr_lmt = <0xf>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,priority = <0x0>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - snps,tx-sched-wrr; - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - - queue1 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3E800>; - snps,low_credit = <0xFFC18000>; - snps,priority = <0x1>; - }; - }; - gmac0: ethernet@e0800000 { compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; reg = <0xe0800000 0x8000>; @@ -408,6 +687,42 @@ examples: snps,axi-config = <&stmmac_axi_setup>; snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + mdio0 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml new file mode 100644 index 000000000000..a65e6aa215a7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/socionext,synquacer-netsec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext NetSec Ethernet Controller IP + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + - Ilias Apalodimas <ilias.apalodimas@linaro.org> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: socionext,synquacer-netsec + + reg: + items: + - description: control register area + - description: EEPROM holding the MAC address and microengine firmware + + clocks: + maxItems: 1 + + clock-names: + const: phy_ref_clk + + dma-coherent: true + + interrupts: + maxItems: 1 + + mdio: + $ref: mdio.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - mdio + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@522d0000 { + compatible = "socionext,synquacer-netsec"; + reg = <0x522d0000 0x10000>, <0x10000000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_netsec>; + clock-names = "phy_ref_clk"; + phy-mode = "rgmii"; + max-speed = <1000>; + max-frame-size = <9000>; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt deleted file mode 100644 index 4e85fc495e87..000000000000 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Socionext AVE ethernet controller - -This describes the devicetree bindings for AVE ethernet controller -implemented on Socionext UniPhier SoCs. - -Required properties: - - compatible: Should be - - "socionext,uniphier-pro4-ave4" : for Pro4 SoC - - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC - - "socionext,uniphier-ld11-ave4" : for LD11 SoC - - "socionext,uniphier-ld20-ave4" : for LD20 SoC - - "socionext,uniphier-pxs3-ave4" : for PXs3 SoC - - reg: Address where registers are mapped and size of region. - - interrupts: Should contain the MAC interrupt. - - phy-mode: See ethernet.txt in the same directory. Allow to choose - "rgmii", "rmii", "mii", or "internal" according to the PHY. - The acceptable mode is SoC-dependent. - - phy-handle: Should point to the external phy device. - See ethernet.txt file in the same directory. - - clocks: A phandle to the clock for the MAC. - For Pro4 SoC, that is "socionext,uniphier-pro4-ave4", - another MAC clock, GIO bus clock and PHY clock are also required. - - clock-names: Should contain - - "ether", "ether-gb", "gio", "ether-phy" for Pro4 SoC - - "ether" for others - - resets: A phandle to the reset control for the MAC. For Pro4 SoC, - GIO bus reset is also required. - - reset-names: Should contain - - "ether", "gio" for Pro4 SoC - - "ether" for others - - socionext,syscon-phy-mode: A phandle to syscon with one argument - that configures phy mode. The argument is the ID of MAC instance. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Required subnode: - - mdio: A container for child nodes representing phy nodes. - See phy.txt in the same directory. - -Example: - - ether: ethernet@65000000 { - compatible = "socionext,uniphier-ld20-ave4"; - reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; - phy-mode = "rgmii"; - phy-handle = <ðphy>; - clock-names = "ether"; - clocks = <&sys_clk 6>; - reset-names = "ether"; - resets = <&sys_rst 6>; - socionext,syscon-phy-mode = <&soc_glue 0>; - local-mac-address = [00 00 00 00 00 00]; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethphy@1 { - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml new file mode 100644 index 000000000000..b0ebcef6801c --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/socionext,uniphier-ave4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext AVE ethernet controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: | + This describes the devicetree bindings for AVE ethernet controller + implemented on Socionext UniPhier SoCs. + +properties: + compatible: + enum: + - socionext,uniphier-pro4-ave4 + - socionext,uniphier-pxs2-ave4 + - socionext,uniphier-ld11-ave4 + - socionext,uniphier-ld20-ave4 + - socionext,uniphier-pxs3-ave4 + - socionext,uniphier-nx1-ave4 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phy-mode: true + + phy-handle: true + + mac-address: true + + local-mac-address: true + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: true + + resets: + minItems: 1 + maxItems: 2 + + reset-names: true + + socionext,syscon-phy-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: ID of MAC instance + description: + A phandle to syscon with one argument that configures phy mode. + The argument is the ID of MAC instance. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ave4 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: ether + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: ether + resets: + maxItems: 1 + reset-names: + const: ether + +required: + - compatible + - reg + - interrupts + - phy-mode + - phy-handle + - clocks + - clock-names + - resets + - reset-names + - mdio + +unevaluatedProperties: false + +examples: + - | + ether: ethernet@65000000 { + compatible = "socionext,uniphier-ld20-ave4"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + clock-names = "ether"; + clocks = <&sys_clk 6>; + reset-names = "ether"; + resets = <&sys_rst 6>; + socionext,syscon-phy-mode = <&soc_glue 0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt deleted file mode 100644 index 9d6c9feb12ff..000000000000 --- a/Documentation/devicetree/bindings/net/socionext-netsec.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Socionext NetSec Ethernet Controller IP - -Required properties: -- compatible: Should be "socionext,synquacer-netsec" -- reg: Address and length of the control register area, followed by the - address and length of the EEPROM holding the MAC address and - microengine firmware -- interrupts: Should contain ethernet controller interrupt -- clocks: phandle to the PHY reference clock -- clock-names: Should be "phy_ref_clk" -- phy-mode: See ethernet.txt file in the same directory -- phy-handle: See ethernet.txt in the same directory. - -- mdio device tree subnode: When the Netsec has a phy connected to its local - mdio, there must be device tree subnode with the following - required properties: - - - #address-cells: Must be <1>. - - #size-cells: Must be <0>. - - For each phy on the mdio bus, there must be a node with the following - fields: - - compatible: Refer to phy.txt - - reg: phy id used to communicate to phy. - -Optional properties: (See ethernet.txt file in the same directory) -- dma-coherent: Boolean property, must only be present if memory - accesses performed by the device are cache coherent. -- max-speed: See ethernet.txt in the same directory. -- max-frame-size: See ethernet.txt in the same directory. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Example: - eth0: ethernet@522d0000 { - compatible = "socionext,synquacer-netsec"; - reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_netsec>; - clock-names = "phy_ref_clk"; - phy-mode = "rgmii"; - max-speed = <1000>; - max-frame-size = <9000>; - phy-handle = <&phy1>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml new file mode 100644 index 000000000000..5e7cfbbebce6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 StarFive Technology Co., Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 DWMAC glue layer + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + - Samin Guo <samin.guo@starfivetech.com> + +select: + properties: + compatible: + contains: + enum: + - starfive,jh7110-dwmac + required: + - compatible + +properties: + compatible: + items: + - enum: + - starfive,jh7110-dwmac + - const: snps,dwmac-5.20 + + reg: + maxItems: 1 + + clocks: + items: + - description: GMAC main clock + - description: GMAC AHB clock + - description: PTP clock + - description: TX clock + - description: GTX clock + + clock-names: + items: + - const: stmmaceth + - const: pclk + - const: ptp_ref + - const: tx + - const: gtx + + interrupts: + minItems: 3 + maxItems: 3 + + interrupt-names: + minItems: 3 + maxItems: 3 + + resets: + items: + - description: MAC Reset signal. + - description: AHB Reset signal. + + reset-names: + items: + - const: stmmaceth + - const: ahb + + starfive,tx-use-rgmii-clk: + description: + Tx clock is provided by external rgmii clock. + type: boolean + + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: Offset of phy mode selection + - description: Shift of phy mode selection + description: + A phandle to syscon with two arguments that configure phy mode. + The argument one is the offset of phy mode selection, the + argument two is the shift of phy mode selection. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + ethernet@16030000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x16030000 0x10000>; + clocks = <&clk 3>, <&clk 2>, <&clk 109>, + <&clk 6>, <&clk 111>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&rst 1>, <&rst 2>; + reset-names = "stmmaceth", "ahb"; + interrupts = <7>, <6>, <5>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + phy-mode = "rgmii-id"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,tso; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&aon_syscon 0xc 0x12>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <4>; + snps,blen = <256 128 64 32 0 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index 062c5174add3..e16287c06e5e 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -7,8 +7,7 @@ and what is needed on STi platforms to program the stmmac glue logic. The device node has following properties. Required properties: - - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac", - "st,stih407-dwmac", "st,stid127-dwmac". + - compatible : "st,stih407-dwmac" - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register. - st,gmac_en: this is to enable the gmac into a dedicated sysctl control @@ -22,7 +21,7 @@ Optional properties: MAC can generate it. - st,tx-retime-src: This specifies which clk is wired up to the mac for retimeing tx lines. This is totally board dependent and can take one of the - posssible values from "txclk", "clk_125" or "clkgen". + possible values from "txclk", "clk_125" or "clkgen". If not passed, the internal clock will be used by default. - sti-ethclk: this is the phy clock. - sti-clkconf: this is an extra sysconfig register, available in new SoCs, diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt deleted file mode 100644 index a90eef11dc46..000000000000 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ /dev/null @@ -1,44 +0,0 @@ -STMicroelectronics STM32 / MCU DWMAC glue layer controller - -This file documents platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and - "snps,dwmac-3.50a" to select IP version. - For MPU family should be "st,stm32mp1-dwmac" to select - glue, and "snps,dwmac-4.20a" to select IP version. -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: Should be "stmmaceth" for the host clock. - Should be "mac-clk-tx" for the MAC TX clock. - Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ - Should be "eth_wake_irq" for the IT which wake up system -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which - encompases the glue register, and the offset of the control register. - -Optional properties: -- clock-names: For MPU family "eth-ck" for PHY without quartz -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. -- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. - -Example: - - ethernet@40028000 { - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 61 0>, <0 62 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - snps,mixed-burst; - dma-ranges; - }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml new file mode 100644 index 000000000000..fc8c96b08d7d --- /dev/null +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller + +maintainers: + - Alexandre Torgue <alexandre.torgue@foss.st.com> + - Christophe Roullier <christophe.roullier@foss.st.com> + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32mp1-dwmac + - const: snps,dwmac-4.20a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-4.10a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-3.50a + + reg: true + + reg-names: + items: + - const: stmmaceth + + clocks: + minItems: 3 + items: + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz + - description: PTP clock + + clock-names: + minItems: 3 + maxItems: 6 + contains: + enum: + - stmmaceth + - mac-clk-tx + - mac-clk-rx + - ethstp + - eth-ck + - ptp_ref + + st,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register + + st,eth-clk-sel: + description: + set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. + type: boolean + + st,eth-ref-clk-sel: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. + type: boolean + +required: + - compatible + - clocks + - clock-names + - st,syscon + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/mfd/stm32h7-rcc.h> + //Example 1 + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + phy-mode = "rgmii"; + }; + + - | + //Example 2 (MCU example) + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + phy-mode = "mii"; + }; + + - | + //Example 3 + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + phy-mode = "mii"; + }; diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml new file mode 100644 index 000000000000..5b130097449b --- /dev/null +++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Dual Ethernet MAC + +maintainers: + - Wells Lu <wellslutw@gmail.com> + +description: | + Sunplus SP7021 dual 10M/100M Ethernet MAC controller. + Device node of the controller has following properties. + +properties: + compatible: + const: sunplus,sp7021-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ethernet-ports: + type: object + additionalProperties: false + description: Ethernet ports to PHY + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-1]$": + type: object + additionalProperties: false + description: Port to PHY + + properties: + reg: + minimum: 0 + maximum: 1 + + phy-handle: + maxItems: 1 + + phy-mode: + maxItems: 1 + + nvmem-cells: + items: + - description: nvmem cell address of MAC address + + nvmem-cell-names: + description: names corresponding to the nvmem cells + items: + - const: mac-address + + required: + - reg + - phy-handle + - phy-mode + - nvmem-cells + - nvmem-cell-names + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - pinctrl-0 + - pinctrl-names + - ethernet-ports + - mdio + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@9c108000 { + compatible = "sunplus,sp7021-emac"; + reg = <0x9c108000 0x400>; + interrupt-parent = <&intc>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0xa7>; + resets = <&rstc 0x97>; + pinctrl-0 = <&emac_demo_board_v3_pins>; + pinctrl-names = "default"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; + + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml new file mode 100644 index 000000000000..81616f9fb493 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Bluetooth Chips + +maintainers: + - David Lechner <david@lechnology.com> + +description: | + This documents the binding structure and common properties for serial + attached TI Bluetooth devices. The following chips are included in this + binding: + + * TI CC256x Bluetooth devices + * TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices + + TI WiLink devices have a UART interface for providing Bluetooth, FM radio, + and GPS over what's called "shared transport". The shared transport is + standard BT HCI protocol with additional channels for the other functions. + + TI WiLink devices also have a separate WiFi interface as described in + wireless/ti,wlcore.yaml. + + This bindings follows the UART slave device binding in ../serial/serial.yaml. + +properties: + compatible: + enum: + - ti,cc2560 + - ti,wl1271-st + - ti,wl1273-st + - ti,wl1281-st + - ti,wl1283-st + - ti,wl1285-st + - ti,wl1801-st + - ti,wl1805-st + - ti,wl1807-st + - ti,wl1831-st + - ti,wl1835-st + - ti,wl1837-st + + enable-gpios: + maxItems: 1 + + vio-supply: + description: Vio input supply (1.8V) + + vbat-supply: + description: Vbat input supply (2.9-4.8V) + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ext_clock + + max-speed: + default: 3000000 + + nvmem-cells: + maxItems: 1 + description: + Nvmem data cell that contains a 6 byte BD address with the most + significant byte first (big-endian). + + nvmem-cell-names: + items: + - const: bd-address + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serial { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&clk32k_wl18xx>; + clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml new file mode 100644 index 000000000000..3dde10de4630 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Simplelink CC1352P7 wireless MCU + +description: + The CC1352P7 MCU can be connected via SPI or UART. + +maintainers: + - Ayush Singh <ayushdevel1325@gmail.com> + +properties: + compatible: + const: ti,cc1352p7 + + clocks: + items: + - description: high-frequency main system (MCU and peripherals) clock + - description: low-frequency system clock + + clock-names: + items: + - const: sclk_hf + - const: sclk_lf + + reset-gpios: + maxItems: 1 + + vdds-supply: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serial { + mcu { + compatible = "ti,cc1352p7"; + clocks = <&sclk_hf 0>, <&sclk_lf 25>; + clock-names = "sclk_hf", "sclk_lf"; + reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdds>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 81ae8cafabc1..f07ae3173b03 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -1,10 +1,10 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings +title: TI SoC Ethernet Switch Controller (CPSW) maintainers: - Grygorii Strashko <grygorii.strashko@ti.com> @@ -23,19 +23,25 @@ properties: oneOf: - const: ti,cpsw-switch - items: - - const: ti,am335x-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am335x-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,am4372-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am4372-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,dra7-cpsw-switch - - const: ti,cpsw-switch + - const: ti,dra7-cpsw-switch + - const: ti,cpsw-switch reg: maxItems: 1 description: - The physical base address and size of full the CPSW module IO range + The physical base address and size of full the CPSW module IO range + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 ranges: true @@ -44,7 +50,6 @@ properties: description: CPSW functional clock clock-names: - maxItems: 1 items: - const: fck @@ -57,22 +62,23 @@ properties: interrupt-names: items: - - const: "rx_thresh" - - const: "rx" - - const: "tx" - - const: "misc" + - const: rx_thresh + - const: rx + - const: tx + - const: misc pinctrl-names: true syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses - ethernet-ports: type: object + additionalProperties: false + properties: '#address-cells': const: 1 @@ -80,53 +86,41 @@ properties: const: 0 patternProperties: - "^port@[0-9]+$": - type: object - minItems: 1 - maxItems: 2 - description: CPSW external ports - - allOf: - - $ref: ethernet-controller.yaml# - - properties: - reg: - maxItems: 1 - enum: [1, 2] - description: CPSW port number - - phys: - $ref: /schemas/types.yaml#definitions/phandle-array - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - $ref: /schemas/types.yaml#/definitions/string-array - maxItems: 1 - description: label associated with this port - - ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 - minimum: 1 - maximum: 1024 - description: - Specifies default PORT VID to be used to segregate - ports. Default value - CPSW port number. - - required: - - reg - - phys - - mdio: - type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" - description: - CPSW MDIO bus. + "^port@[12]$": + type: object + description: CPSW external ports + + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [1, 2] + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,dual-emac-pvid: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 1024 + description: + Specifies default PORT VID to be used to segregate + ports. Default value - CPSW port number. + + required: + - reg + - phys cpts: type: object + unevaluatedProperties: false description: The Common Platform Time Sync (CPTS) module @@ -136,7 +130,6 @@ properties: description: CPTS reference clock clock-names: - maxItems: 1 items: - const: cpts @@ -156,6 +149,14 @@ properties: - clocks - clock-names +patternProperties: + "^mdio@": + type: object + description: + CPSW MDIO bus. + $ref: ti,davinci-mdio.yaml# + + required: - compatible - reg @@ -167,6 +168,8 @@ required: - '#address-cells' - '#size-cells' +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -182,7 +185,6 @@ examples: #address-cells = <1>; #size-cells = <1>; syscon = <&scm_conf>; - inctrl-names = "default", "sleep"; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, @@ -201,7 +203,7 @@ examples: phys = <&phy_gmii_sel 1>; phy-handle = <ðphy0_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <1>; + ti,dual-emac-pvid = <1>; }; cpsw_port2: port@2 { @@ -211,7 +213,7 @@ examples: phys = <&phy_gmii_sel 2>; phy-handle = <ðphy1_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <2>; + ti,dual-emac-pvid = <2>; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 242ac4935a4b..53604fab0b73 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -13,44 +13,51 @@ description: TI SoC Davinci/Keystone2 MDIO Controller allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: oneOf: - - const: ti,davinci_mdio - - items: - - const: ti,keystone_mdio - - const: ti,davinci_mdio - - items: - - const: ti,cpsw-mdio - - const: ti,davinci_mdio - - items: - - const: ti,am4372-mdio - - const: ti,cpsw-mdio - - const: ti,davinci_mdio + - const: ti,davinci_mdio + - items: + - const: ti,keystone_mdio + - const: ti,davinci_mdio + - items: + - const: ti,cpsw-mdio + - const: ti,davinci_mdio + - items: + - const: ti,am4372-mdio + - const: ti,cpsw-mdio + - const: ti,davinci_mdio reg: maxItems: 1 bus_freq: - maximum: 2500000 - description: - MDIO Bus frequency + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 2500000 + description: MDIO Bus frequency + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fck ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties: compatible: contains: const: ti,davinci_mdio +then: required: - bus_freq @@ -60,6 +67,8 @@ required: - "#address-cells" - "#size-cells" +unevaluatedProperties: false + examples: - | davinci_mdio: mdio@4a101000 { diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml new file mode 100644 index 000000000000..db74474207ed --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,dp83822.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DP83822 ethernet PHY + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It + provides all of the physical layer functions needed to transmit and receive + data over standard, twisted-pair cables or to connect to an external, + fiber-optic transceiver. Additionally, the DP83822 provides flexibility to + connect to a MAC through a standard MII, RMII, or RGMII interface + + Specifications about the Ethernet PHY can be found at: + http://www.ti.com/lit/ds/symlink/dp83822i.pdf + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + reg: + maxItems: 1 + + ti,link-loss-low: + type: boolean + description: | + DP83822 PHY in Fiber mode only. + Sets the DP83822 to detect a link drop condition when the signal goes + high. If not set then link drop will occur when the signal goes low. + This property is only applicable if the fiber mode support is strapped + to on. + + ti,fiber-mode: + type: boolean + description: | + DP83822 PHY only. + If present the DP83822 PHY is configured to operate in fiber mode + Fiber mode support can also be strapped. If the strap pin is not set + correctly or not set at all then this boolean can be used to enable it. + If the fiber mode is not strapped then signal detection for the PHY + is disabled. + In fiber mode, auto-negotiation is disabled and the PHY can only work in + 100base-fx (full and half duplex) modes. + + rx-internal-delay-ps: + description: | + DP83822 PHY only. + Setting this property to a non-zero number sets the RX internal delay + for the PHY. The internal delay for the PHY is fixed to 3.5ns relative + to receive data. + + tx-internal-delay-ps: + description: | + DP83822 PHY only. + Setting this property to a non-zero number sets the TX internal delay + for the PHY. The internal delay for the PHY is fixed to 3.5ns relative + to transmit data. + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <1>; + tx-internal-delay-ps = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt deleted file mode 100644 index 388ff48f53ae..000000000000 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ /dev/null @@ -1,62 +0,0 @@ -* Texas Instruments - dp83867 Giga bit ethernet phy - -Required properties: - - reg - The ID number for the phy, usually a small integer - - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values. Required only if interface type is - PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values. Required only if interface type is - PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h - for applicable values - -Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays - will be left at their default values, as set by the PHY's pin strapping. - The default strapping will use a delay of 2.00 ns. Thus - PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no - internal delay, but as PHY_INTERFACE_MODE_RGMII_ID. The device tree - should use "rgmii-id" if internal delays are desired as this may be - changed in future to cause "rgmii" mode to disable delays. - -Optional property: - - ti,min-output-impedance - MAC Interface Impedance control to set - the programmable output impedance to - minimum value (35 ohms). - - ti,max-output-impedance - MAC Interface Impedance control to set - the programmable output impedance to - maximum value (70 ohms). - - ti,dp83867-rxctrl-strap-quirk - This denotes the fact that the - board has RX_DV/RX_CTRL pin strapped in - mode 1 or 2. To ensure PHY operation, - there are specific actions that - software needs to take when this pin is - strapped in these modes. See data manual - for details. - - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h - for applicable values. The CLK_OUT pin can also - be disabled by this property. When omitted, the - PHY's default will be left as is. - - ti,sgmii-ref-clock-output-enable - This denotes which - SGMII configuration is used (4 or 6-wire modes). - Some MACs work with differential SGMII clock. - See data manual for details. - -Note: ti,min-output-impedance and ti,max-output-impedance are mutually - exclusive. When both properties are present ti,max-output-impedance - takes precedence. - -Default child nodes are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - - ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; - -Datasheet can be found: -http://www.ti.com/product/DP83867IR/datasheet diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml new file mode 100644 index 000000000000..4bc1f98fd9fe --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,dp83867.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DP83867 ethernet PHY + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The DP83867 device is a robust, low power, fully featured Physical Layer + transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX + and 1000BASE-T Ethernet protocols. + + The DP83867 is designed for easy implementation of 10/100/1000 Mbps Ethernet + LANs. It interfaces directly to twisted pair media via an external + transformer. This device interfaces directly to the MAC layer through the + IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit + Media Independent Interface (GMII) or Reduced GMII (RGMII). + + Specifications about the Ethernet PHY can be found at: + https://www.ti.com/lit/gpn/dp83867ir + +properties: + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: + Nvmem data cell containing the value to write to the + IO_IMPEDANCE_CTRL field of the IO_MUX_CFG register. + + nvmem-cell-names: + items: + - const: io_impedance_ctrl + + ti,min-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a minimum value (35 ohms). + + ti,max-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a maximum value (70 ohms). + Note: Specifying an io_impedance_ctrl nvmem cell or one of the + ti,min-output-impedance, ti,max-output-impedance properties + are mutually exclusive. If more than one is present, an nvmem + cell takes precedence over ti,max-output-impedance, which in + turn takes precedence over ti,min-output-impedance. + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values + + ti,clk-output-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h + for applicable values. The CLK_OUT pin can also be disabled by this + property. When omitted, the PHY's default will be left as is. + + ti,rx-internal-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID. + + ti,tx-internal-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID. + + Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock + delays will be left at their default values, as set by the PHY's pin + strapping. The default strapping will use a delay of 2.00 ns. Thus + PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no + internal delay, but as PHY_INTERFACE_MODE_RGMII_ID. The device tree + should use "rgmii-id" if internal delays are desired as this may be + changed in future to cause "rgmii" mode to disable delays. + + ti,dp83867-rxctrl-strap-quirk: + type: boolean + description: | + This denotes the fact that the board has RX_DV/RX_CTRL pin strapped in + mode 1 or 2. To ensure PHY operation, there are specific actions that + software needs to take when this pin is strapped in these modes. + See data manual for details. + + ti,sgmii-ref-clock-output-enable: + type: boolean + description: | + This denotes which SGMII configuration is used (4 or 6-wire modes). + Some MACs work with differential SGMII clock. See data manual for details. + + ti,fifo-depth: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable + values. + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/net/ti-dp83867.h> + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,max-output-impedance; + ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_RCLK>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index 6fe3e451da8a..fb6725df4668 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -1,17 +1,17 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/ti,dp83869.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI DP83869 ethernet PHY allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-phy.yaml# maintainers: - - Dan Murphy <dmurphy@ti.com> + - Andrew Davis <afd@ti.com> description: | The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver @@ -24,7 +24,7 @@ description: | conversions. The DP83869HM can also support Bridge Conversion from RGMII to SGMII and SGMII to RGMII. - Specifications about the charger can be found at: + Specifications about the Ethernet PHY can be found at: http://www.ti.com/lit/ds/symlink/dp83869hm.pdf properties: @@ -44,29 +44,43 @@ properties: to a maximum value (70 ohms). tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. ti,op-mode: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Operational mode for the PHY. If this is not set then the operational mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values + rx-internal-delay-ps: + description: Delay is in pico seconds + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, + 3250, 3500, 3750, 4000 ] + default: 2000 + + tx-internal-delay-ps: + description: Delay is in pico seconds + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, + 3250, 3500, 3750, 4000 ] + default: 2000 + required: - reg +unevaluatedProperties: false + examples: - | #include <dt-bindings/net/ti-dp83869.h> @@ -78,7 +92,9 @@ examples: tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>; rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; - ti,max-output-impedance = "true"; + ti,max-output-impedance; ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml new file mode 100644 index 000000000000..f5c22d6dcaee --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icss-iep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am642-icss-iep + - ti,j721e-icss-iep + - const: ti,am654-icss-iep + + - const: ti,am654-icss-iep + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the IEP source clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + /* AM65x */ + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml new file mode 100644 index 000000000000..229c8f32019f --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSSG PRUSS Ethernet + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +description: + Ethernet based on the Programmable Real-Time Unit and Industrial + Communication Subsystem. + +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + +properties: + compatible: + enum: + - ti,am642-icssg-prueth # for AM64x SoC family + - ti,am654-icssg-prueth # for AM65x SoC family + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MSMC SRAM node + + dmas: + maxItems: 10 + + dma-names: + items: + - const: tx0-0 + - const: tx0-1 + - const: tx0-2 + - const: tx0-3 + - const: tx1-0 + - const: tx1-1 + - const: tx1-2 + - const: tx1-3 + - const: rx0 + - const: rx1 + + ti,mii-g-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_G_RT module's syscon regmap. + + ti,mii-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_RT module's syscon regmap + + ti,iep: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + items: + maxItems: 1 + description: + phandle to IEP (Industrial Ethernet Peripheral) for ICSSG + + interrupts: + maxItems: 2 + description: + Interrupt specifiers to TX timestamp IRQ. + + interrupt-names: + items: + - const: tx_ts0 + - const: tx_ts1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + ^port@[0-1]$: + type: object + description: ICSSG PRUETH external ports + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [0, 1] + description: ICSSG PRUETH port number + + interrupts: + maxItems: 1 + + ti,syscon-rgmii-delay: + items: + - items: + - description: phandle to system controller node + - description: The offset to ICSSG control register + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to system controller node and register offset + to ICSSG control register for RGMII transmit delay + + ti,half-duplex-capable: + type: boolean + description: + Indicates that the PHY output pin COL is routed to ICSSG GPIO pin + (PRGx_PRU0/1_GPIO10) as input so that the ICSSG MII port is + capable of half duplex operations. + + required: + - reg + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - sram + - dmas + - dma-names + - ethernet-ports + - ti,mii-g-rt + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + /* Example k3-am654 base board SR2.0, dual-emac */ + pruss2_eth: ethernet { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf", + "ti-pruss/am65x-rtu0-prueth-fw.elf", + "ti-pruss/am65x-txpru0-prueth-fw.elf", + "ti-pruss/am65x-pru1-prueth-fw.elf", + "ti-pruss/am65x-rtu1-prueth-fw.elf", + "ti-pruss/am65x-txpru1-prueth-fw.elf"; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + pruss2_emac0: port@0 { + reg = <0>; + phy-handle = <&pruss2_eth0_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 24>; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + pruss2_emac1: port@1 { + reg = <1>; + phy-handle = <&pruss2_eth1_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 25>; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml new file mode 100644 index 000000000000..c9c25132d154 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -0,0 +1,317 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + - Sekhar Nori <nsekhar@ti.com> + +description: + The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports + (one external) and provides Ethernet packet communication for the device. + The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports + (two external) and provides Ethernet packet communication and switching. + + The internal Communications Port Programming Interface (CPPI5) (Host port 0). + Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels + and one RX channels and operating by NAVSS Unified DMA Peripheral Root + Complex (UDMA-P) controller. + + CPSWxG features + updated Address Lookup Engine (ALE). + priority level Quality Of Service (QOS) support (802.1p) + Support for Audio/Video Bridging (P802.1Qav/D6.0) + Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) + Flow Control (802.3x) Support + Time Sensitive Network Support + IEEE P902.3br/D2.0 Interspersing Express Traffic + IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic + Configurable number of addresses plus VLANs + Configurable number of classifier/policers + VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on + ingress, Auto VLAN removal on egress and auto pad to minimum frame size. + RX/TX csum offload + Management Data Input/Output (MDIO) interface for PHYs management + RMII/RGMII Interfaces support + new version of Common Platform Time Sync (CPTS) + + The CPSWxG NUSS is integrated into + device MCU domain named MCU_CPSW0 on AM654x/J721E SoC. + device MAIN domain named CPSW0 on AM642x SoC. + + Specifications can be found at + https://www.ti.com/lit/pdf/spruid7 + https://www.ti.com/lit/zip/spruil1 + https://www.ti.com/lit/pdf/spruim2 + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + enum: + - ti,am642-cpsw-nuss + - ti,am654-cpsw-nuss + - ti,j7200-cpswxg-nuss + - ti,j721e-cpsw-nuss + - ti,j721e-cpswxg-nuss + - ti,j784s4-cpswxg-nuss + + reg: + maxItems: 1 + description: + The physical base address and size of full the CPSWxG NUSS IO range + + reg-names: + items: + - const: cpsw_nuss + + ranges: true + + dma-coherent: true + + clocks: + maxItems: 1 + description: CPSWxG NUSS functional clock + + clock-names: + items: + - const: fck + + assigned-clock-parents: true + + assigned-clocks: true + + power-domains: + maxItems: 1 + + dmas: + maxItems: 9 + + dma-names: + items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: tx4 + - const: tx5 + - const: tx6 + - const: tx7 + - const: rx + + ethernet-ports: + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^port@[1-8]$": + type: object + description: CPSWxG NUSS external ports + + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 1 + maximum: 8 + description: CPSW port number + + phys: + minItems: 1 + items: + - description: CPSW MAC's PHY. + - description: Serdes PHY. Serdes PHY is required only if + the Serdes has to be configured in the + Single-Link configuration. + + phy-names: + minItems: 1 + items: + - const: mac + - const: serdes + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#/definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the system control device node which + provides access to efuse + - description: offset to efuse registers??? + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: ti,davinci-mdio.yaml# + + description: + CPSW MDIO bus. + + "^cpts@[0-9a-f]+": + type: object + $ref: ti,k3-am654-cpts.yaml# + description: + CPSW Common Platform Time Sync (CPTS) module. + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - power-domains + - dmas + - dma-names + - '#address-cells' + - '#size-cells' + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - ti,j721e-cpswxg-nuss + - ti,j784s4-cpswxg-nuss + then: + properties: + ethernet-ports: + patternProperties: + "^port@[5-8]$": false + "^port@[1-4]$": + properties: + reg: + minimum: 1 + maximum: 4 + + - if: + not: + properties: + compatible: + contains: + enum: + - ti,j7200-cpswxg-nuss + - ti,j721e-cpswxg-nuss + - ti,j784s4-cpswxg-nuss + then: + properties: + ethernet-ports: + patternProperties: + "^port@[3-8]$": false + "^port@[1-2]$": + properties: + reg: + minimum: 1 + maximum: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/net/ti-dp83867.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,am654-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + bus_freq = <1000000>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml new file mode 100644 index 000000000000..3e910d3b24a0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + - Sekhar Nori <nsekhar@ti.com> + +description: |+ + The TI AM654x/J721E CPTS module is used to facilitate host control of time + sync operations. + Main features of CPTS module are + - selection of multiple external clock sources + - Software control of time sync events via interrupt or polling + - 64-bit timestamp mode in ns with PPM and nudge adjustment. + - hardware timestamp push inputs (HWx_TS_PUSH) + - timestamp counter compare output (TS_COMP) + - timestamp counter bit output (TS_SYNC) + - periodic Generator function outputs (TS_GENFx) + - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN) + - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping + + Depending on integration it enables compliance with the IEEE 1588-2008 + standard for a precision clock synchronization protocol, Ethernet Enhanced + Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time + Measurement (PTM). + + TI AM654x/J721E SoCs has several similar CPTS modules integrated into the + different parts of the system which could be synchronized with each other + - Main CPTS + - MCU CPSW CPTS with IEEE 1588-2008 support + - PCIe subsystem CPTS for PTM support + + Depending on CPTS module integration and when CPTS is integral part of + another module (MCU CPSW for example) "compatible" and "reg" can + be omitted - parent module is fully responsible for CPTS enabling and + configuration. + +properties: + $nodename: + pattern: "^cpts@[0-9a-f]+$" + + compatible: + enum: + - ti,am65-cpts + - ti,j721e-cpts + + reg: + maxItems: 1 + description: + The physical base address and size of CPTS IO range + + reg-names: + items: + - const: cpts + + clocks: + maxItems: 1 + description: CPTS reference clock + + clock-names: + items: + - const: cpts + + interrupts: + items: + - description: CPTS events interrupt + + interrupt-names: + items: + - const: cpts + + assigned-clock-parents: true + + assigned-clocks: true + + power-domains: + maxItems: 1 + + ti,cpts-ext-ts-inputs: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 8 + description: + Number of hardware timestamp push inputs (HWx_TS_PUSH) + + ti,cpts-periodic-outputs: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 8 + description: + Number of timestamp Generator function outputs (TS_GENFx) + + ti,pps: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: | + The pair of HWx_TS_PUSH input and TS_GENFy output indexes used for + PPS events generation. Platform/board specific. + + refclk-mux: + type: object + additionalProperties: false + description: CPTS reference clock multiplexer clock + properties: + '#clock-cells': + const: 0 + + clocks: + maxItems: 8 + + required: + - clocks + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cpts@310d0000 { + compatible = "ti,am65-cpts"; + reg = <0x310d0000 0x400>; + reg-names = "cpts"; + clocks = <&main_cpts_mux>; + clock-names = "cpts"; + interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + + main_cpts_mux: refclk-mux { + #clock-cells = <0>; + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, + <&k3_clks 157 91>, <&k3_clks 157 77>, + <&k3_clks 157 102>, <&k3_clks 157 80>, + <&k3_clks 120 3>, <&k3_clks 121 3>; + assigned-clocks = <&main_cpts_mux>; + assigned-clock-parents = <&k3_clks 118 11>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt deleted file mode 100644 index 6d03ff8c7068..000000000000 --- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt +++ /dev/null @@ -1,61 +0,0 @@ -Texas Instruments Bluetooth Chips ---------------------------------- - -This documents the binding structure and common properties for serial -attached TI Bluetooth devices. The following chips are included in this -binding: - -* TI CC256x Bluetooth devices -* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices - -TI WiLink devices have a UART interface for providing Bluetooth, FM radio, -and GPS over what's called "shared transport". The shared transport is -standard BT HCI protocol with additional channels for the other functions. - -TI WiLink devices also have a separate WiFi interface as described in -wireless/ti,wlcore.txt. - -This bindings follows the UART slave device binding in -../serial/slave-device.txt. - -Required properties: - - compatible: should be one of the following: - "ti,cc2560" - "ti,wl1271-st" - "ti,wl1273-st" - "ti,wl1281-st" - "ti,wl1283-st" - "ti,wl1285-st" - "ti,wl1801-st" - "ti,wl1805-st" - "ti,wl1807-st" - "ti,wl1831-st" - "ti,wl1835-st" - "ti,wl1837-st" - -Optional properties: - - enable-gpios : GPIO signal controlling enabling of BT. Active high. - - vio-supply : Vio input supply (1.8V) - - vbat-supply : Vbat input supply (2.9-4.8V) - - clocks : Must contain an entry, for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names : Must include the following entry: - "ext_clock" (External clock provided to the TI combo chip). - - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address - with the most significant byte first (big-endian). - - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) - -Example: - -&serial0 { - compatible = "ns16550a"; - ... - bluetooth { - compatible = "ti,wl1835-st"; - enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - clocks = <&clk32k_wl18xx>; - clock-names = "ext_clock"; - nvmem-cells = <&bd_address>; - nvmem-cell-names = "bd-address"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml new file mode 100644 index 000000000000..052f636158b3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti DWMAC Ethernet controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +select: + properties: + compatible: + contains: + enum: + - toshiba,visconti-dwmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - toshiba,visconti-dwmac + - const: snps,dwmac-4.20a + + reg: + maxItems: 1 + + clocks: + items: + - description: main clock + - description: PHY reference clock + + clock-names: + items: + - const: stmmaceth + - const: phy_ref_clk + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/toshiba,tmpv770x.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + piether: ethernet@28000000 { + compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a"; + reg = <0 0x28000000 0 0x10000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; + clock-names = "stmmaceth", "phy_ref_clk"; + snps,txpbl = <4>; + snps,rxpbl = <4>; + snps,tso; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml new file mode 100644 index 000000000000..4158673f723c --- /dev/null +++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/vertexcom-mse102x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Vertexcom MSE102x (SPI) + +maintainers: + - Stefan Wahren <stefan.wahren@chargebyte.com> + +description: + Vertexcom's MSE102x are a family of HomePlug GreenPHY chips. + They can be connected either via RGMII, RMII or SPI to a host CPU. + + In order to use a MSE102x chip as SPI device, it must be defined as + a child of an SPI master device in the device tree. + + More information can be found at + http://www.vertexcom.com/doc/MSE1022%20Product%20Brief.pdf + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + enum: + - vertexcom,mse1021 + - vertexcom,mse1022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + minimum: 6000000 + maximum: 7142857 + +required: + - compatible + - reg + - interrupts + - spi-cpha + - spi-cpol + - spi-max-frequency + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "vertexcom,mse1021"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <7142857>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml new file mode 100644 index 000000000000..4aa521f1be8c --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices + +maintainers: + - Arend van Spriel <arend@broadcom.com> + +description: + The Broadcom Single chip MAC part for the BCM4329 family and + later Cypress chips in the same family named CYW4373 and similar. + These chips also have a Bluetooth portion described in a separate + binding. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm43143-fmac + - brcm,bcm4341b0-fmac + - brcm,bcm4341b4-fmac + - brcm,bcm4341b5-fmac + - brcm,bcm4329-fmac + - brcm,bcm4330-fmac + - brcm,bcm4334-fmac + - brcm,bcm43340-fmac + - brcm,bcm4335-fmac + - brcm,bcm43362-fmac + - brcm,bcm4339-fmac + - brcm,bcm43430a0-fmac + - brcm,bcm43430a1-fmac + - brcm,bcm43455-fmac + - brcm,bcm43456-fmac + - brcm,bcm4354-fmac + - brcm,bcm4356-fmac + - brcm,bcm4359-fmac + - brcm,bcm4366-fmac + - cypress,cyw4373-fmac + - cypress,cyw43012-fmac + - const: brcm,bcm4329-fmac + - enum: + - brcm,bcm4329-fmac + - pci14e4,43dc # BCM4355 + - pci14e4,4464 # BCM4364 + - pci14e4,4488 # BCM4377 + - pci14e4,4425 # BCM4378 + - pci14e4,4433 # BCM4387 + + reg: + description: SDIO function number for the device (for most cases + this will be 1) or PCI device identifier. + + interrupts: + maxItems: 1 + description: Out-of-band (OOB) IRQ line for waking up the host + in response to WLAN activity. This corresponds to the HOST_WAKE + line into the chip. + + interrupt-names: + description: Name for the OOB IRQ, this must be set to "host-wake". + const: host-wake + + brcm,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Drive strength used for the SDIO pins on the device in mA. + minimum: 0 + maximum: 32 + + reset-gpios: + maxItems: 1 + description: A GPIO line connected to the WL_RST line, if present + this shall be flagged as active low. + + brcm,ccode-map: + $ref: /schemas/types.yaml#/definitions/string-array + description: Multiple strings for translating ISO3166 country code to + brcmfmac firmware country code and revision. + items: + pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$' + + brcm,ccode-map-trivial: + description: | + Use a trivial mapping of ISO3166 country codes to brcmfmac firmware + country code and revision: cc -> { cc, 0 }. In other words, assume that + the CLM blob firmware uses ISO3166 country codes as well, and that all + revisions are zero. This property is mutually exclusive with + brcm,ccode-map. If both properties are specified, then brcm,ccode-map + takes precedence. + type: boolean + + brcm,cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Wi-Fi radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device if present. + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Overrides the board type, which is normally the compatible of + the root node. This can be used to decouple the overall system board or + device name from the board type for WiFi purposes, which is used to + construct firmware and NVRAM configuration filenames, allowing for + multiple devices that share the same module or characteristics for the + WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms, + this should be the Apple module-instance codename prefixed by "apple,", + e.g. "apple,honshu". + + apple,antenna-sku: + $ref: /schemas/types.yaml#/definitions/string + description: Antenna SKU used to identify a specific antenna configuration + on Apple platforms. This is use to build firmware filenames, to allow + platforms with different antenna configs to have different firmware and/or + NVRAM. This would normally be filled in by the bootloader from platform + configuration data. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + mmc@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + clocks = <&clk 0>, <&clk 1>; + clock-names = "mclk", "apb_pclk"; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + non-removable; + vmmc-supply = <&wl_bt_reg>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt deleted file mode 100644 index cffb2d6876e3..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ /dev/null @@ -1,38 +0,0 @@ -Broadcom BCM43xx Fullmac wireless SDIO devices - -This node provides properties for controlling the Broadcom wireless device. The -node is expected to be specified as a child node to the SDIO controller that -connects the device to the system. - -Required properties: - - - compatible : Should be "brcm,bcm4329-fmac". - -Optional properties: - - brcm,drive-strength : drive strength used for SDIO pins on device in mA - (default = 6). - - interrupts : specifies attributes for the out-of-band interrupt (host-wake). - When not specified the device will use in-band SDIO interrupts. - - interrupt-names : name of the out-of-band interrupt, which must be set - to "host-wake". - -Example: - -mmc3: mmc@1c12000 { - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt deleted file mode 100644 index 6830c4786f8a..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ /dev/null @@ -1,30 +0,0 @@ -Espressif ESP8089 wireless SDIO devices - -This node provides properties for controlling the ESP8089 wireless device. -The node is expected to be specified as a child node to the SDIO controller -that connects the device to the system. - -Required properties: - - - compatible : Should be "esp,esp8089". - -Optional properties: - - esp,crystal-26M-en: Integer value for the crystal_26M_en firmware parameter - -Example: - -&mmc1 { - #address-cells = <1>; - #size-cells = <0>; - - vmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - - esp8089: sdio_wifi@1 { - compatible = "esp,esp8089"; - reg = <1>; - esp,crystal-26M-en = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml new file mode 100644 index 000000000000..0ea84d6fe73e --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Espressif ESP8089 + +maintainers: + - Hans de Goede <hdegoede@redhat.com> + +properties: + compatible: + const: esp,esp8089 + + reg: + maxItems: 1 + + esp,crystal-26M-en: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Value for the crystal_26M_en firmware parameter + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + mmc { + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt deleted file mode 100644 index f6442b1397f5..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt +++ /dev/null @@ -1,24 +0,0 @@ -Common IEEE 802.11 properties - -This provides documentation of common properties that are valid for all wireless -devices. - -Optional properties: - - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be - used for devices that in a given config support less channels than - normally. It may happen chipset supports a wide wireless band but it is - limited to some part of it due to used antennas or power amplifier. - An example case for this can be tri-band wireless router with two - identical chipsets used for two different 5 GHz subbands. Using them - incorrectly could not work or decrease performance noticeably. - -Example: - -pcie@0,0 { - reg = <0x0000 0 0 0 0>; - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <2402000 2482000>, - <5170000 5250000>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml new file mode 100644 index 000000000000..d89f7a3f88a7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common IEEE 802.11 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: | + This provides documentation of common properties that are valid for + all wireless devices + +properties: + ieee80211-freq-limit: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + description: + List of supported frequency ranges in KHz. This can be used for devices + that in a given config support less channels than normally. It may happen + chipset supports a wide wireless band but it is limited to some part of + it due to used antennas or power amplifier. An example case for this + can be tri-band wireless router with two identical chipsets used for two + different 5 GHz subbands. Using them incorrectly could not work or + decrease performance noticeably + +additionalProperties: true + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <2402000 2482000>, + <5170000 5250000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 9bf9bbac16e2..cdc303caf5f4 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices ------ This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -10,7 +10,9 @@ Required properties: - compatible : should be one of the following: * "marvell,sd8787" * "marvell,sd8897" + * "marvell,sd8978" * "marvell,sd8997" + * "nxp,iw416" * "pci11ab,2b42" * "pci1b4b,2b42" diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt deleted file mode 100644 index 7e675dafc256..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt +++ /dev/null @@ -1,52 +0,0 @@ -* MediaTek mt76xx devices - -This node provides properties for configuring the MediaTek mt76xx wireless -device. The node is expected to be specified as a child node of the PCI -controller to which the wireless chip is connected. - -Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. -For SoC, use the compatible string "mediatek,mt7628-wmac" and the following -properties: - -- reg: Address and length of the register set for the device. -- interrupts: Main device interrupt - -Optional properties: - -- ieee80211-freq-limit: See ieee80211.txt -- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data - -The MAC address can as well be set with corresponding optional properties -defined in net/ethernet.txt. - -Optional nodes: -- led: Properties for a connected LED - Optional properties: - - led-sources: See Documentation/devicetree/bindings/leds/common.txt - -&pcie { - pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <5000000 6000000>; - mediatek,mtd-eeprom = <&factory 0x8000>; - - led { - led-sources = <2>; - }; - }; - }; -}; - -MT7628 example: - -wmac: wmac@10300000 { - compatible = "mediatek,mt7628-wmac"; - reg = <0x10300000 0x100000>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - mediatek,mtd-eeprom = <&factory 0x0000>; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml new file mode 100644 index 000000000000..252207adbc54 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -0,0 +1,301 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek mt76 wireless devices + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - Lorenzo Bianconi <lorenzo@kernel.org> + - Ryder Lee <ryder.lee@mediatek.com> + +description: | + This node provides properties for configuring the MediaTek mt76xx + wireless device. The node is expected to be specified as a child + node of the PCI controller to which the wireless chip is connected. + Alternatively, it can specify the wireless part of the MT7628/MT7688 + or MT7622/MT7986 SoC. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - mediatek,mt76 + - mediatek,mt7628-wmac + - mediatek,mt7622-wmac + - mediatek,mt7981-wmac + - mediatek,mt7986-wmac + + reg: + minItems: 1 + maxItems: 3 + description: + MT7986 should contain 3 regions consys, dcm, and sku, in this order. + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + memory-region: + maxItems: 1 + + resets: + maxItems: 1 + description: + Specify the consys reset for mt7986. + + reset-names: + const: consys + + clocks: + maxItems: 2 + description: + Specify the consys clocks for mt7986. + + clock-names: + items: + - const: mcu + - const: ap2conn + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the infrastructure bus fabric syscon node. + This property is MT7622 specific + + ieee80211-freq-limit: true + + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + + mediatek,eeprom-data: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + EEPROM data embedded as array. + + mediatek,mtd-eeprom: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to MTD partition + - description: offset containing EEPROM data + description: + Phandle to a MTD partition + offset containing EEPROM data + deprecated: true + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + Specify if the radio eeprom partition is written in big-endian + + mediatek,eeprom-merge-otp: + type: boolean + description: + Merge EEPROM data with OTP data. Can be used on boards where the flash + calibration data is generic and specific calibration data should be + pulled from the OTP ROM + + mediatek,disable-radar-background: + type: boolean + description: + Disable/enable radar/CAC detection running on a dedicated offchannel + chain available on some hw. + Background radar/CAC detection allows to avoid the CAC downtime + switching on a different channel during CAC detection on the selected + radar channel. + + led: + type: object + $ref: /schemas/leds/common.yaml# + additionalProperties: false + properties: + led-active-low: + description: + LED is enabled with ground signal. + type: boolean + + led-sources: + maxItems: 1 + + power-limits: + type: object + additionalProperties: false + patternProperties: + "^r[0-9]+": + type: object + additionalProperties: false + properties: + regdomain: + $ref: /schemas/types.yaml#/definitions/string + description: + Regdomain refers to a legal regulatory region. Different + countries define different levels of allowable transmitter + power, time that a channel can be occupied, and different + available channels + enum: + - FCC + - ETSI + - JP + + patternProperties: + "^txpower-[256]g$": + type: object + additionalProperties: false + patternProperties: + "^b[0-9]+$": + type: object + additionalProperties: false + properties: + channels: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: + Pairs of first and last channel number of the selected + band + + rates-cck: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm per-rate power limit values + + rates-ofdm: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + description: + 8 half-dBm per-rate power limit values + + rates-mcs: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of per-rate power limit values for 802.11n/802.11ac + rates for multiple channel bandwidth settings. + Each set starts with the number of channel bandwidth + settings for which the rate set applies, followed by + either 8 or 10 power limit values. The order of the + channel bandwidth settings is 20, 40, 80 and 160 MHz. + maxItems: 4 + items: + minItems: 9 + maxItems: 11 + + rates-ru: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of per-rate power limit values for 802.11ax rates + for multiple channel bandwidth or resource unit settings. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 12 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + items: + minItems: 13 + maxItems: 13 + + txs-delta: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Half-dBm power delta for different numbers of antennas + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x8000>; + big-endian; + + led { + led-sources = <2>; + }; + + power-limits { + r0 { + regdomain = "FCC"; + txpower-5g { + b0 { + channels = <36 48>; + rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>; + rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>, + /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>; + rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>, + /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>; + }; + b1 { + channels = <100 181>; + rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>; + rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>; + txs-delta = <12 9 6>; + rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>; + }; + }; + }; + }; + }; + }; + + - | + wifi@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + wifi@18000000 { + compatible = "mediatek,mt7622-wmac"; + reg = <0x10300000 0x100000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; + + mediatek,infracfg = <&infracfg>; + + power-domains = <&scpsys 3>; + }; + + - | + wifi@18000000 { + compatible = "mediatek,mt7986-wmac"; + resets = <&watchdog 23>; + reset-names = "consys"; + reg = <0x18000000 0x1000000>, + <0x10003000 0x1000>, + <0x11d10000 0x1000>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen 50>, + <&topckgen 62>; + clock-names = "mcu", "ap2conn"; + memory-region = <&wmcpu_emi>; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml new file mode 100644 index 000000000000..2460ccc08237 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless + +maintainers: + - Adham Abozaeid <adham.abozaeid@microchip.com> + - Ajay Singh <ajay.kathat@microchip.com> + +description: + The wilc1000 chips can be connected via SPI or SDIO. This document + describes the binding to connect wilc devices. + +properties: + compatible: + const: microchip,wilc1000 + + reg: true + + interrupts: + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + + clock-names: + const: rtc + + enable-gpios: + maxItems: 1 + description: Used by wilc1000-spi to determine the GPIO line + connected to the ENABLE line. If specified, reset-gpios + must be specified as well as otherwise the driver cannot + ensure the timing required between asserting ENABLE + and deasserting RESET. This should be declared as an + active-high signal. + + reset-gpios: + maxItems: 1 + description: Used by wilc1000-spi to determine the GPIO line + connected to the RESET line. This should be declared as an + active-low signal. + +required: + - compatible + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + wifi@0 { + compatible = "microchip,wilc1000"; + spi-max-frequency = <48000000>; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + }; + }; + + - | + mmc { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + bus-width = <4>; + wifi@0 { + compatible = "microchip,wilc1000"; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt deleted file mode 100644 index aaaeeb5f935b..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Qualcomm Atheros ath9k wireless devices - -This node provides properties for configuring the ath9k wireless device. The -node is expected to be specified as a child node of the PCI controller to -which the wireless chip is connected. - -Required properties: -- compatible: For PCI and PCIe devices this should be an identifier following - the format as defined in "PCI Bus Binding to Open Firmware" - Revision 2.1. One of the possible formats is "pciVVVV,DDDD" - where VVVV is the PCI vendor ID and DDDD is PCI device ID. - Typically QCA's PCI vendor ID 168c is used while the PCI device - ID depends on the chipset - see the following (possibly - incomplete) list: - - 0023 for AR5416 - - 0024 for AR5418 - - 0027 for AR9160 - - 0029 for AR9220 and AR9223 - - 002a for AR9280 and AR9283 - - 002b for AR9285 - - 002c for AR2427 - - 002d for AR9227 - - 002e for AR9287 - - 0030 for AR9380, AR9381 and AR9382 - - 0032 for AR9485 - - 0033 for AR9580 and AR9590 - - 0034 for AR9462 - - 0036 for AR9565 - - 0037 for AR9485 -- reg: Address and length of the register set for the device. - -Optional properties: -- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the - ath9k wireless chip (in this case the calibration / - EEPROM data will be loaded from userspace using the - kernel firmware loader). - -The MAC address will be determined using the optional properties defined in -net/ethernet.txt. - -In this example, the node is defined as child node of the PCI controller: -&pci0 { - wifi@168c,002d { - compatible = "pci168c,002d"; - reg = <0x7000 0 0 0 0x1000>; - qca,no-eeprom; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml new file mode 100644 index 000000000000..0e5412cff2bc --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros ath9k wireless devices + +maintainers: + - Toke Høiland-Jørgensen <toke@toke.dk> + +description: | + This node provides properties for configuring the ath9k wireless device. + The node is expected to be specified as a child node of the PCI controller + to which the wireless chip is connected. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - pci168c,0023 # AR5416 + - pci168c,0024 # AR5418 + - pci168c,0027 # AR9160 + - pci168c,0029 # AR9220 and AR9223 + - pci168c,002a # AR9280 and AR9283 + - pci168c,002b # AR9285 + - pci168c,002c # AR2427 - 802.11n bonded out + - pci168c,002d # AR9227 + - pci168c,002e # AR9287 + - pci168c,0030 # AR9380, AR9381 and AR9382 + - pci168c,0032 # AR9485 + - pci168c,0033 # AR9580 and AR9590 + - pci168c,0034 # AR9462 + - pci168c,0036 # AR9565 + - pci168c,0037 # AR1111 and AR9485 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ieee80211-freq-limit: true + + qca,no-eeprom: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that there is no physical EEPROM connected + + nvmem-cells: + items: + - description: Reference to an nvmem node for the MAC address + - description: Reference to an nvmem node for calibration data + + nvmem-cell-names: + items: + - const: mac-address + - const: calibration + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + compatible = "pci168c,002d"; + reg = <0 0 0 0 0>; + interrupts = <3>; + qca,no-eeprom; + }; + }; + - | + pci0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,11 { + compatible = "pci168c,0029"; + reg = <0x8800 0 0 0 0>; + nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt deleted file mode 100644 index 017128394a3e..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ /dev/null @@ -1,188 +0,0 @@ -* Qualcomm Atheros ath10k wireless devices - -Required properties: -- compatible: Should be one of the following: - * "qcom,ath10k" - * "qcom,ipq4019-wifi" - * "qcom,wcn3990-wifi" - -PCI based devices uses compatible string "qcom,ath10k" and takes calibration -data along with board specific data via "qcom,ath10k-calibration-data". -Rest of the properties are not applicable for PCI based devices. - -AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc (except -"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" -to carry pre calibration data. - -In general, entry "qcom,ath10k-pre-calibration-data" and -"qcom,ath10k-calibration-data" conflict with each other and only one -can be provided per device. - -SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". - -- reg: Address and length of the register set for the device. -- reg-names: Must include the list of following reg names, - "membase" -- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" - compatible target. - reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" - compatible target. - Must contain interrupt-names property per entry for - "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. - -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" - compatible targets. - -Optional properties: -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reseti.txt for details. -- reset-names: Must include the list of following reset names, - "wifi_cpu_init" - "wifi_radio_srif" - "wifi_radio_warm" - "wifi_radio_cold" - "wifi_core_warm" - "wifi_core_cold" -- clocks: List of clock specifiers, must contain an entry for each required - entry in clock-names. -- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and - "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" - compatible target. -- qcom,msi_addr: MSI interrupt address. -- qcom,msi_base: Base value to add before writing MSI data into - MSI address register. -- qcom,ath10k-calibration-variant: string to search for in the board-2.bin - variant list with the same bus and device - specific ids -- qcom,ath10k-calibration-data : calibration data + board specific data - as an array, the length can vary between - hw versions. -- qcom,ath10k-pre-calibration-data : pre calibration data as an array, - the length can vary between hw versions. -- <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" are "vdd-0.8-cx-mx", - "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". -- memory-region: - Usage: optional - Value type: <phandle> - Definition: reference to the reserved-memory for the msa region - used by the wifi firmware running in Q6. -- iommus: - Usage: optional - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- ext-fem-name: - Usage: Optional - Value type: string - Definition: Name of external front end module used. Some valid FEM names - for example: "microsemi-lx5586", "sky85703-11" - and "sky85803" etc. -- qcom,snoc-host-cap-8bit-quirk: - Usage: Optional - Value type: <empty> - Definition: Quirk specifying that the firmware expects the 8bit version - of the host capability QMI request -- qcom,xo-cal-data: xo cal offset to be configured in xo trim register. - -Example (to supply PCI based wifi block details): - -In this example, the node is defined as child node of the PCI controller. - -pci { - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@0,0 { - reg = <0 0 0 0 0>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; - ext-fem-name = "microsemi-lx5586"; - }; - }; -}; - -Example (to supply ipq4019 SoC wifi block details): - -wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; - resets = <&gcc WIFI0_CPU_INIT_RESET>, - <&gcc WIFI0_RADIO_SRIF_RESET>, - <&gcc WIFI0_RADIO_WARM_RESET>, - <&gcc WIFI0_RADIO_COLD_RESET>, - <&gcc WIFI0_CORE_WARM_RESET>, - <&gcc WIFI0_CORE_COLD_RESET>; - reset-names = "wifi_cpu_init", - "wifi_radio_srif", - "wifi_radio_warm", - "wifi_radio_cold", - "wifi_core_warm", - "wifi_core_cold"; - clocks = <&gcc GCC_WCSS2G_CLK>, - <&gcc GCC_WCSS2G_REF_CLK>, - <&gcc GCC_WCSS2G_RTC_CLK>; - clock-names = "wifi_wcss_cmd", - "wifi_wcss_ref", - "wifi_wcss_rtc"; - interrupts = <0 0x20 0x1>, - <0 0x21 0x1>, - <0 0x22 0x1>, - <0 0x23 0x1>, - <0 0x24 0x1>, - <0 0x25 0x1>, - <0 0x26 0x1>, - <0 0x27 0x1>, - <0 0x28 0x1>, - <0 0x29 0x1>, - <0 0x2a 0x1>, - <0 0x2b 0x1>, - <0 0x2c 0x1>, - <0 0x2d 0x1>, - <0 0x2e 0x1>, - <0 0x2f 0x1>, - <0 0xa8 0x0>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", - "msi12", "msi13", "msi14", "msi15", - "legacy"; - qcom,msi_addr = <0x0b006040>; - qcom,msi_base = <0x40>; - qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; -}; - -Example (to supply wcn3990 SoC wifi block details): - -wifi@18000000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0x18800000 0x800000>; - reg-names = "membase"; - clocks = <&clock_gcc clk_rf_clk2_pin>; - clock-names = "cxo_ref_clk_pin"; - interrupts = - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - vdd-0.8-cx-mx-supply = <&pm8998_l5>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - memory-region = <&wifi_msa_mem>; - iommus = <&apps_smmu 0x0040 0x1>; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml new file mode 100644 index 000000000000..7758a55dd328 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -0,0 +1,362 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath10k wireless devices + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: + Qualcomm Technologies, Inc. IEEE 802.11ac devices. + +properties: + compatible: + enum: + - qcom,ath10k # SDIO-based devices + - qcom,ipq4019-wifi + - qcom,wcn3990-wifi # SNoC-based devices + + reg: + maxItems: 1 + + reg-names: + items: + - const: membase + + interrupts: + minItems: 12 + maxItems: 17 + + interrupt-names: + minItems: 12 + maxItems: 17 + + memory-region: + maxItems: 1 + description: + Reference to the MSA memory region used by the Wi-Fi firmware + running on the Q6 core. + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + resets: + maxItems: 6 + + reset-names: + items: + - const: wifi_cpu_init + - const: wifi_radio_srif + - const: wifi_radio_warm + - const: wifi_radio_cold + - const: wifi_core_warm + - const: wifi_core_cold + + ext-fem-name: + $ref: /schemas/types.yaml#/definitions/string + description: Name of external front end module used. + enum: + - microsemi-lx5586 + - sky85703-11 + - sky85803 + + wifi-firmware: + type: object + additionalProperties: false + description: | + The ath10k Wi-Fi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + properties: + iommus: + maxItems: 1 + required: + - iommus + + ieee80211-freq-limit: true + + qcom,ath10k-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data + board-specific data as a byte array. The length + can vary between hardware versions. + + qcom,ath10k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + Unique variant identifier of the calibration data in board-2.bin + for designs with colliding bus and device specific ids + + qcom,ath10k-pre-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Pre-calibration data as a byte array. The length can vary between + hardware versions. + + qcom,coexist-support: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1] + description: + Indicate coex support by the hardware. + + qcom,coexist-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + COEX GPIO number provided to the Wi-Fi firmware. + + qcom,msa-fixed-perm: + type: boolean + description: + Whether to skip executing an SCM call that reassigns the memory + region ownership. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + + qcom,snoc-host-cap-8bit-quirk: + type: boolean + description: + Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + + qcom,xo-cal-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + XO cal offset to be configured in XO trim register. + + vdd-0.8-cx-mx-supply: + description: Main logic power rail + + vdd-1.8-xo-supply: + description: Crystal oscillator supply + + vdd-1.3-rfa-supply: + description: RFA supply + + vdd-3.3-ch0-supply: + description: Primary Wi-Fi antenna supply + + vdd-3.3-ch1-supply: + description: Secondary Wi-Fi antenna supply + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - $ref: ieee80211.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-wifi + then: + properties: + interrupts: + minItems: 17 + maxItems: 17 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + - const: msi8 + - const: msi9 + - const: msi10 + - const: msi11 + - const: msi12 + - const: msi13 + - const: msi14 + - const: msi15 + - const: legacy + + clocks: + items: + - description: Wi-Fi command clock + - description: Wi-Fi reference clock + - description: Wi-Fi RTC clock + + clock-names: + items: + - const: wifi_wcss_cmd + - const: wifi_wcss_ref + - const: wifi_wcss_rtc + + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-wifi + + then: + properties: + clocks: + minItems: 1 + items: + - description: XO reference clock + - description: Qualcomm Debug Subsystem clock + + clock-names: + minItems: 1 + items: + - const: cxo_ref_clk_pin + - const: qdss + + interrupts: + items: + - description: CE0 + - description: CE1 + - description: CE2 + - description: CE3 + - description: CE4 + - description: CE5 + - description: CE6 + - description: CE7 + - description: CE8 + - description: CE9 + - description: CE10 + - description: CE11 + + interrupt-names: false + + required: + - interrupts + +examples: + # SNoC + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; + + # AHB + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", + "wifi_radio_srif", + "wifi_radio_warm", + "wifi_radio_cold", + "wifi_core_warm", + "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", + "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8", + "msi9", + "msi10", + "msi11", + "msi12", + "msi13", + "msi14", + "msi15", + "legacy"; + ieee80211-freq-limit = <5470000 5875000>; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml new file mode 100644 index 000000000000..817f02a8b481 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Linaro Limited +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices (PCIe) + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: | + Qualcomm Technologies IEEE 802.11ax PCIe devices + +properties: + compatible: + enum: + - pci17cb,1103 # WCN6855 + + reg: + maxItems: 1 + + qcom,ath11k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: | + string to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml new file mode 100644 index 000000000000..7d5f982a3d09 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -0,0 +1,468 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: | + These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax + devices, for example like AHB based IPQ8074. + +properties: + compatible: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + - qcom,wcn6750-wifi + - qcom,ipq5018-wifi + + reg: + maxItems: 1 + + interrupts: + minItems: 32 + maxItems: 52 + + interrupt-names: + maxItems: 52 + + qcom,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + DT entry of q6v5-wcss remoteproc driver. + Phandle to a node that can contain the following properties + * compatible + * reg + * reg-names + + qcom,ath11k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + string to uniquely identify variant of the calibration data in the + board-2.bin for designs with colliding bus and device specific ids + + memory-region: + minItems: 1 + maxItems: 2 + description: + phandle to a node describing reserved memory (System RAM memory) + used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + required: + - iommus + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN6750 in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + +required: + - compatible + - reg + - interrupts + - qcom,rproc + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + +examples: + - | + + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq8074-wcss-pil"; + reg = <0xcd00000 0x4040>, + <0x4ab000 0x20>; + reg-names = "qdsp6", + "rmb"; + }; + + wifi0: wifi@c000000 { + compatible = "qcom,ipq8074-wifi"; + reg = <0xc000000 0x2000000>; + interrupts = <0 320 1>, + <0 319 1>, + <0 318 1>, + <0 317 1>, + <0 316 1>, + <0 315 1>, + <0 314 1>, + <0 311 1>, + <0 310 1>, + <0 411 1>, + <0 410 1>, + <0 40 1>, + <0 39 1>, + <0 302 1>, + <0 301 1>, + <0 37 1>, + <0 36 1>, + <0 296 1>, + <0 295 1>, + <0 294 1>, + <0 293 1>, + <0 292 1>, + <0 291 1>, + <0 290 1>, + <0 289 1>, + <0 288 1>, + <0 239 1>, + <0 236 1>, + <0 235 1>, + <0 234 1>, + <0 233 1>, + <0 232 1>, + <0 231 1>, + <0 230 1>, + <0 229 1>, + <0 228 1>, + <0 224 1>, + <0 223 1>, + <0 203 1>, + <0 183 1>, + <0 180 1>, + <0 179 1>, + <0 178 1>, + <0 177 1>, + <0 176 1>, + <0 163 1>, + <0 162 1>, + <0 160 1>, + <0 159 1>, + <0 158 1>, + <0 157 1>, + <0 156 1>; + interrupt-names = "misc-pulse1", + "misc-latch", + "sw-exception", + "watchdog", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring3", + "host2rxdma-monitor-ring2", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "ppdu-end-interrupts-mac3", + "ppdu-end-interrupts-mac2", + "ppdu-end-interrupts-mac1", + "rxdma2host-monitor-status-ring-mac3", + "rxdma2host-monitor-status-ring-mac2", + "rxdma2host-monitor-status-ring-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "rxdma2host-destination-ring-mac3", + "rxdma2host-destination-ring-mac2", + "rxdma2host-destination-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "tcl2host-status-ring"; + qcom,rproc = <&q6v5_wcss>; + }; + + - | + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + qcn9074_0: wifi@51100000 { + no-map; + reg = <0x0 0x51100000 0x0 0x03500000>; + }; + }; + + pci { + pcie0 { + #size-cells = <2>; + #address-cells = <3>; + + wifi_0: wifi@0 { + reg = <0 0 0 0 0>; + memory-region = <&qcn9074_0>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17a10040 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml new file mode 100644 index 000000000000..84e5659e50ef --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020, Silicon Laboratories, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs WFxxx + +maintainers: + - Jérôme Pouiller <jerome.pouiller@silabs.com> + +description: > + Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device + from the WFxxx series is the WF200 described here: + https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf + + The WF200 can be connected via SPI or via SDIO. + + For SDIO: + + Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is + sufficient for the SDIO devices). + + It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without + it, you may encounter issues during reboot. The mmc-pwrseq should be + compatible with mmc-pwrseq-simple. Please consult + Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more + information. + +properties: + compatible: + items: + - enum: + - prt,prtt1c-wfm200 # Protonic PRTT1C Board + - silabs,brd4001a # WGM160P Evaluation Board + - silabs,brd8022a # WF200 Evaluation Board + - silabs,brd8023a # WFM200 Evaluation Board + - const: silabs,wf200 # Chip alone without antenna + + reg: + description: + When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is + the chip select address of the device as defined in the SPI devices + bindings. + maxItems: 1 + + interrupts: + description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is + used, this property is required. When SDIO is used, the "in-band" + interrupt provided by the SDIO bus is used unless an interrupt is defined + in the Device Tree. + maxItems: 1 + + reset-gpios: + description: (SPI only) Phandle of gpio that will be used to reset chip + during probe. Without this property, you may encounter issues with warm + boot. + + For SDIO, the reset gpio should declared using a mmc-pwrseq. + maxItems: 1 + + wakeup-gpios: + description: Phandle of gpio that will be used to wake-up chip. Without this + property, driver will disable most of power saving features. + maxItems: 1 + + silabs,antenna-config-file: + $ref: /schemas/types.yaml#/definitions/string + description: Use an alternative file for antenna configuration (aka + "Platform Data Set" in Silabs jargon). Default depends of "compatible" + string. For "silabs,wf200", the default is 'wf200.pds'. + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + wifi@0 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_irq &wfx_gpios>; + reg = <0>; + interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + spi-max-frequency = <42000000>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + wfx_pwrseq: wfx_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_reset>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + mmc { + mmc-pwrseq = <&wfx_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_wakeup>; + reg = <1>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index f38950560982..88fd28d15eac 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -9,11 +9,12 @@ Required properties: - spi-max-frequency : Maximum SPI clocking speed of device in Hz - interrupts : Should contain interrupt line - vio-supply : phandle to regulator providing VIO -- ti,power-gpio : GPIO connected to chip's PMEN pin Optional properties: - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which provides configuration data (calibration, MAC, ...) +- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in + SPI mode - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt deleted file mode 100644 index cb5c9e1569ca..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt +++ /dev/null @@ -1,57 +0,0 @@ -* Texas Instruments wl12xx/wl18xx wireless lan controller - -The wl12xx/wl18xx chips can be connected via SPI or via SDIO. This -document describes the binding for the SPI connected chip. - -Required properties: -- compatible : Should be one of the following: - * "ti,wl1271" - * "ti,wl1273" - * "ti,wl1281" - * "ti,wl1283" - * "ti,wl1801" - * "ti,wl1805" - * "ti,wl1807" - * "ti,wl1831" - * "ti,wl1835" - * "ti,wl1837" -- reg : Chip select address of device -- spi-max-frequency : Maximum SPI clocking speed of device in Hz -- interrupts : Should contain parameters for 1 interrupt line. -- vwlan-supply : Point the node of the regulator that powers/enable the - wl12xx/wl18xx chip - -Optional properties: -- ref-clock-frequency : Reference clock frequency (should be set for wl12xx) -- clock-xtal : boolean, clock is generated from XTAL - -- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt - for optional SPI connection related properties, - -Examples: - -For wl12xx family: -&spi1 { - wlcore: wlcore@1 { - compatible = "ti,wl1271"; - reg = <1>; - spi-max-frequency = <48000000>; - interrupt-parent = <&gpio3>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - vwlan-supply = <&vwlan_fixed>; - clock-xtal; - ref-clock-frequency = <38400000>; - }; -}; - -For wl18xx family: -&spi0 { - wlcore: wlcore@0 { - compatible = "ti,wl1835"; - reg = <0>; - spi-max-frequency = <48000000>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_EDGE_RISING>; - vwlan-supply = <&vwlan_fixed>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt deleted file mode 100644 index 9306c4dadd46..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ /dev/null @@ -1,45 +0,0 @@ -TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices - -This node provides properties for controlling the wilink wireless device. The -node is expected to be specified as a child node to the SDIO controller that -connects the device to the system. - -Required properties: - - compatible: should be one of the following: - * "ti,wl1271" - * "ti,wl1273" - * "ti,wl1281" - * "ti,wl1283" - * "ti,wl1285" - * "ti,wl1801" - * "ti,wl1805" - * "ti,wl1807" - * "ti,wl1831" - * "ti,wl1835" - * "ti,wl1837" - - interrupts : specifies attributes for the out-of-band interrupt. - -Optional properties: - - ref-clock-frequency : ref clock frequency in Hz - - tcxo-clock-frequency : tcxo clock frequency in Hz - -Note: the *-clock-frequency properties assume internal clocks. In case of external -clock, new bindings (for parsing the clock nodes) have to be added. - -Example: - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupt-parent = <&gpio0>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml new file mode 100644 index 000000000000..75c9489f319b --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + The wl12xx/wl18xx chips can be connected via SPI or via SDIO. + Note that the *-clock-frequency properties assume internal clocks. In case + of external clocks, new bindings (for parsing the clock nodes) have to be + added. + +properties: + compatible: + enum: + - ti,wl1271 + - ti,wl1273 + - ti,wl1281 + - ti,wl1283 + - ti,wl1285 + - ti,wl1801 + - ti,wl1805 + - ti,wl1807 + - ti,wl1831 + - ti,wl1835 + - ti,wl1837 + + reg: + maxItems: 1 + description: + This is required when connected via SPI, and optional when connected via + SDIO. + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: irq + - const: wakeup + + vwlan-supply: + description: + Points to the node of the regulator that powers/enable the wl12xx/wl18xx + chip. This is required when connected via SPI. + + + ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Reference clock frequency. + + tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TCXO clock frequency. + + clock-xtal: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates that the clock is generated from XTAL. + +required: + - compatible + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,wl1271 + - ti,wl1273 + - ti,wl1281 + - ti,wl1283 + then: + required: + - ref-clock-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + // For wl12xx family: + spi { + #address-cells = <1>; + #size-cells = <0>; + + wlcore1: wlcore@1 { + compatible = "ti,wl1271"; + reg = <1>; + spi-max-frequency = <48000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + clock-xtal; + ref-clock-frequency = <38400000>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + // For wl18xx family: + spi { + #address-cells = <1>; + #size-cells = <0>; + + wlcore2: wlcore@0 { + compatible = "ti,wl1835"; + reg = <0>; + spi-max-frequency = <48000000>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + vwlan-supply = <&vwlan_fixed>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + // SDIO example: + mmc3 { + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + wlcore3: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt deleted file mode 100644 index 7360617cdedb..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ /dev/null @@ -1,76 +0,0 @@ -XILINX AXI ETHERNET Device Tree Bindings --------------------------------------------------------- - -Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core -provides connectivity to an external ethernet PHY supporting different -interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two -segments of memory for buffering TX and RX, as well as the capability of -offloading TX/RX checksum calculation off the processor. - -Management configuration is done through the AXI interface, while payload is -sent and received through means of an AXI DMA controller. This driver -includes the DMA driver code, so this driver is incompatible with AXI DMA -driver. - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", - "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space, as well as the address - and length of the AXI DMA controller IO space, unless - axistream-connected is specified, in which case the reg - attribute of the node referenced by it is used. -- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, - and optionally Ethernet core. If axistream-connected is - specified, the TX/RX DMA interrupts should be on that node - instead, and only the Ethernet core interrupt is optionally - specified here. -- phy-handle : Should point to the external phy device. - See ethernet.txt file in the same directory. -- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware - -Optional properties: -- phy-mode : See ethernet.txt -- xlnx,phy-type : Deprecated, do not use, but still accepted in preference - to phy-mode. -- xlnx,txcsum : 0 or empty for disabling TX checksum offload, - 1 to enable partial TX checksum offload, - 2 to enable full TX checksum offload -- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload -- clocks : AXI bus clock for the device. Refer to common clock bindings. - Used to calculate MDIO clock divisor. If not specified, it is - auto-detected from the CPU clock (but only on platforms where - this is possible). New device trees should specify this - the - auto detection is only for backward compatibility. -- axistream-connected: Reference to another node which contains the resources - for the AXI DMA controller used by this device. - If this is specified, the DMA-related resources from that - device (DMA registers and DMA TX/RX interrupts) rather - than this one will be used. - - mdio : Child node for MDIO bus. Must be defined if PHY access is - required through the core's MDIO interface (i.e. always, - unless the PHY is accessed through a different bus). - -Example: - axi_ethernet_eth: ethernet@40c00000 { - compatible = "xlnx,axi-ethernet-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0 1>; - clocks = <&axi_clk>; - phy-mode = "mii"; - reg = <0x40c00000 0x40000 0x50c00000 0x40000>; - xlnx,rxcsum = <0x2>; - xlnx,rxmem = <0x800>; - xlnx,txcsum = <0x2>; - phy-handle = <&phy0>; - axi_ethernetlite_0_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: phy@0 { - device_type = "ethernet-phy"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt deleted file mode 100644 index 038dda48b8e6..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt +++ /dev/null @@ -1,35 +0,0 @@ -XILINX GMIITORGMII Converter Driver Device Tree Bindings --------------------------------------------------------- - -The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media -Independent Interface (RGMII) core provides the RGMII between RGMII-compliant -Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. -This core can be used in all three modes of operation(10/100/1000 Mb/s). -The Management Data Input/Output (MDIO) interface is used to configure the -Speed of operation. This core can switch dynamically between the three -Different speed modes by configuring the conveter register through mdio write. - -This converter sits between the ethernet MAC and the external phy. -MAC <==> GMII2RGMII <==> RGMII_PHY - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Should be "xlnx,gmii-to-rgmii-1.0" -- reg : The ID number for the phy, usually a small integer -- phy-handle : Should point to the external phy device. - See ethernet.txt file in the same directory. - -Example: - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { - ...... - }; - gmiitorgmii: gmiitorgmii@8 { - compatible = "xlnx,gmii-to-rgmii-1.0"; - reg = <8>; - phy-handle = <&phy>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml new file mode 100644 index 000000000000..bbe89ea9590c --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXI 1G/2.5G Ethernet Subsystem + +description: | + Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core + provides connectivity to an external ethernet PHY supporting different + interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two + segments of memory for buffering TX and RX, as well as the capability of + offloading TX/RX checksum calculation off the processor. + + Management configuration is done through the AXI interface, while payload is + sent and received through means of an AXI DMA controller. This driver + includes the DMA driver code, so this driver is incompatible with AXI DMA + driver. + +maintainers: + - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> + +properties: + compatible: + enum: + - xlnx,axi-ethernet-1.00.a + - xlnx,axi-ethernet-1.01.a + - xlnx,axi-ethernet-2.01.a + + reg: + description: + Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. + maxItems: 2 + + interrupts: + items: + - description: Ethernet core interrupt + - description: Tx DMA interrupt + - description: Rx DMA interrupt + description: + Ethernet core interrupt is optional. If axistream-connected property is + present DMA node should contains TX/RX DMA interrupts else DMA interrupt + resources are mentioned on ethernet node. + minItems: 1 + + phy-handle: true + + xlnx,rxmem: + description: + Set to allocated memory buffer for Rx/Tx in the hardware. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-mode: + enum: + - mii + - gmii + - rgmii + - sgmii + - 1000BaseX + + xlnx,phy-type: + description: + Do not use, but still accepted in preference to phy-mode. + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,txcsum: + description: + TX checksum offload. 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload and 2 to enable full TX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,rxcsum: + description: + RX checksum offload. 0 or empty for disabling RX checksum offload, + 1 to enable partial RX checksum offload and 2 to enable full RX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,switch-x-sgmii: + type: boolean + description: + Indicate the Ethernet core is configured to support both 1000BaseX and + SGMII modes. If set, the phy-mode should be set to match the mode + selected on core reset (i.e. by the basex_or_sgmii core input line). + + clocks: + items: + - description: Clock for AXI register slave interface. + - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces. + - description: Ethernet reference clock, used by signal delay primitives + and transceivers. + - description: MGT reference clock (used by optional internal PCS/PMA PHY) + + clock-names: + items: + - const: s_axi_lite_clk + - const: axis_clk + - const: ref_clk + - const: mgt_clk + + axistream-connected: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle of AXI DMA controller which contains the resources + used by this device. If this is specified, the DMA-related resources + from that device (DMA registers and DMA TX/RX interrupts) rather than + this one will be used. + + mdio: + type: object + + pcs-handle: + description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point to the PCS/PMA PHY, + and "phy-handle" should point to an external PHY if exists. + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 32 + description: TX and RX DMA channel phandle + + dma-names: + items: + pattern: "^[tr]x_chan([0-9]|1[0-5])$" + description: + Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel + Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel + minItems: 2 + maxItems: 32 + +required: + - compatible + - interrupts + - reg + - xlnx,rxmem + - phy-handle + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +additionalProperties: false + +examples: + - | + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <2 0 1>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + dmas = <&xilinx_dma 0>, <&xilinx_dma 1>; + dma-names = "tx_chan0", "rx_chan0"; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; + + - | + axi_ethernet_eth1: ethernet@40000000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <0>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x00 0x40000000 0x00 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy1>; + axistream-connected = <&dma>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml new file mode 100644 index 000000000000..92d8ade988f6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,emaclite.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Emaclite Ethernet controller + +maintainers: + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> + - Harini Katakam <harini.katakam@amd.com> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + enum: + - xlnx,opb-ethernetlite-1.01.a + - xlnx,opb-ethernetlite-1.01.b + - xlnx,xps-ethernetlite-1.00.a + - xlnx,xps-ethernetlite-2.00.a + - xlnx,xps-ethernetlite-2.01.a + - xlnx,xps-ethernetlite-3.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phy-handle: true + + local-mac-address: true + + xlnx,tx-ping-pong: + type: boolean + description: hardware supports tx ping pong buffer. + + xlnx,rx-ping-pong: + type: boolean + description: hardware supports rx ping pong buffer. + +required: + - compatible + - reg + - interrupts + - phy-handle + +additionalProperties: false + +examples: + - | + axi_ethernetlite_1: ethernet@40e00000 { + compatible = "xlnx,xps-ethernetlite-3.00.a"; + reg = <0x40e00000 0x10000>; + interrupt-parent = <&axi_intc_1>; + interrupts = <1>; + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <&phy0>; + xlnx,rx-ping-pong; + xlnx,tx-ping-pong; + }; diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml new file mode 100644 index 000000000000..0f781dac6717 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx GMII to RGMII Converter + +maintainers: + - Harini Katakam <harini.katakam@amd.com> + +description: + The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media + Independent Interface (RGMII) core provides the RGMII between RGMII-compliant + ethernet physical media devices (PHY) and the Gigabit Ethernet controller. + This core can be used in all three modes of operation(10/100/1000 Mb/s). + The Management Data Input/Output (MDIO) interface is used to configure the + speed of operation. This core can switch dynamically between the three + different speed modes by configuring the converter register through mdio write. + The core cannot function without an external phy connected to it. + +properties: + compatible: + const: xlnx,gmii-to-rgmii-1.0 + + reg: + minimum: 0 + maximum: 31 + description: The ID number for the phy. + + phy-handle: + $ref: ethernet-controller.yaml#/properties/phy-handle + +required: + - compatible + - reg + - phy-handle + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + }; + gmiitorgmii@8 { + compatible = "xlnx,gmii-to-rgmii-1.0"; + reg = <8>; + phy-handle = <&phy>; + }; + }; |