summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net')
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt6
-rw-r--r--Documentation/devicetree/bindings/net/brcm,bcmgenet.txt2
-rw-r--r--Documentation/devicetree/bindings/net/broadcom-bluetooth.txt2
-rw-r--r--Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml51
-rw-r--r--Documentation/devicetree/bindings/net/can/sun4i_can.txt36
-rw-r--r--Documentation/devicetree/bindings/net/davinci-mdio.txt36
-rw-r--r--Documentation/devicetree/bindings/net/ethernet-controller.yaml5
-rw-r--r--Documentation/devicetree/bindings/net/ethernet-phy.yaml5
-rw-r--r--Documentation/devicetree/bindings/net/ftgmac100.txt8
-rw-r--r--Documentation/devicetree/bindings/net/lpc-eth.txt5
-rw-r--r--Documentation/devicetree/bindings/net/nfc/pn532.txt46
-rw-r--r--Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt29
-rw-r--r--Documentation/devicetree/bindings/net/qca,ar803x.yaml111
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ether.yaml114
-rw-r--r--Documentation/devicetree/bindings/net/sh_eth.txt69
-rw-r--r--Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml240
-rw-r--r--Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml71
-rw-r--r--Documentation/devicetree/bindings/net/ti,dp83869.yaml84
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt6
-rw-r--r--Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt26
24 files changed, 789 insertions, 187 deletions
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
index 792196bf4abd..ae4796ec50a0 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -38,6 +38,8 @@ required:
- phy-handle
- allwinner,sram
+unevaluatedProperties: false
+
examples:
- |
emac: ethernet@1c0b000 {
@@ -49,8 +51,4 @@ examples:
allwinner,sram = <&emac_sram 1>;
};
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
-
...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
index df24d9d969f7..e5562c525ed9 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -49,6 +49,8 @@ required:
- compatible
- reg
+unevaluatedProperties: false
+
examples:
- |
mdio@1c0b080 {
@@ -63,8 +65,4 @@ examples:
};
};
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
-
...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index ef446ae166f3..f683b7104e3e 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -49,6 +49,8 @@ required:
- clock-names
- phy-mode
+unevaluatedProperties: false
+
examples:
- |
gmac: ethernet@1c50000 {
@@ -61,8 +63,4 @@ examples:
phy-mode = "mii";
};
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
-
...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 3fb0714e761e..11654d4b80fb 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -184,6 +184,8 @@ allOf:
- mdio-parent-bus
- mdio@1
+unevaluatedProperties: false
+
examples:
- |
ethernet@1c0b000 {
@@ -314,8 +316,4 @@ examples:
};
};
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
-
...
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index b7336b9d6a3c..48a7f916c5e4 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -44,6 +44,12 @@ Optional properties:
Admission Control Block supports reporting the number of packets in-flight in a
switch queue
+- resets: a single phandle and reset identifier pair. See
+ Documentation/devicetree/binding/reset/reset.txt for details.
+
+- reset-names: If the "reset" property is specified, this property should have
+ the value "switch" to denote the switch reset line.
+
Port subnodes:
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 3956af1d30f3..33a0d67e4ce5 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -2,7 +2,7 @@
Required properties:
- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
- "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5".
+ "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5".
- reg: address and length of the register set for the device
- interrupts and/or interrupts-extended: must be two cells, the first cell
is the general purpose interrupt line, while the second cell is the
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index 4fa00e2eafcf..f16b99571af1 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -14,6 +14,8 @@ Required properties:
* "brcm,bcm4330-bt"
* "brcm,bcm43438-bt"
* "brcm,bcm4345c5"
+ * "brcm,bcm43540-bt"
+ * "brcm,bcm4335a0"
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
new file mode 100644
index 000000000000..770af7c46114
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CAN Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: allwinner,sun7i-a20-can
+ - const: allwinner,sun4i-a10-can
+ - const: allwinner,sun4i-a10-can
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sun7i-a20-ccu.h>
+
+ can0: can@1c2bc00 {
+ compatible = "allwinner,sun7i-a20-can",
+ "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_CAN>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt
deleted file mode 100644
index f69845e6feaf..000000000000
--- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Allwinner A10/A20 CAN controller Device Tree Bindings
------------------------------------------------------
-
-Required properties:
-- compatible: "allwinner,sun4i-a10-can"
-- reg: physical base address and size of the Allwinner A10/A20 CAN register map.
-- interrupts: interrupt specifier for the sole interrupt.
-- clock: phandle and clock specifier.
-
-Example
--------
-
-SoC common .dtsi file:
-
- can0_pins_a: can0@0 {
- allwinner,pins = "PH20","PH21";
- allwinner,function = "can";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-...
- can0: can@1c2bc00 {
- compatible = "allwinner,sun4i-a10-can";
- reg = <0x01c2bc00 0x400>;
- interrupts = <0 26 4>;
- clocks = <&apb1_gates 4>;
- status = "disabled";
- };
-
-Board specific .dts file:
-
- can0: can@1c2bc00 {
- pinctrl-names = "default";
- pinctrl-0 = <&can0_pins_a>;
- status = "okay";
- };
diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
deleted file mode 100644
index e6527de80f10..000000000000
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings
----------------------------------------------------
-
-Required properties:
-- compatible : Should be "ti,davinci_mdio"
- and "ti,keystone_mdio" for Keystone 2 SoCs
- and "ti,cpsw-mdio" for am335x, am472x, am57xx/dra7, dm814x SoCs
- and "ti,am4372-mdio" for am472x SoC
-- reg : physical base address and size of the davinci mdio
- registers map
-- bus_freq : Mdio Bus frequency
-
-Optional properties:
-- ti,hwmods : Must be "davinci_mdio"
-
-Note: "ti,hwmods" field is used to fetch the base address and irq
-resources from TI, omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Examples:
-
- mdio: davinci_mdio@4a101000 {
- compatible = "ti,davinci_mdio";
- reg = <0x4A101000 0x1000>;
- bus_freq = <1000000>;
- };
-
-(or)
-
- mdio: davinci_mdio@4a101000 {
- compatible = "ti,davinci_mdio";
- ti,hwmods = "davinci_mdio";
- bus_freq = <1000000>;
- };
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 0e7c31794ae6..ac471b60ed6a 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -121,6 +121,11 @@ properties:
and is useful for determining certain configuration settings
such as flow control thresholds.
+ sfp:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference to a node representing a SFP cage.
+
tx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
description:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index f70f18ff821f..8927941c74bb 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -153,6 +153,11 @@ properties:
Delay after the reset was deasserted in microseconds. If
this property is missing the delay will be skipped.
+ sfp:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference to a node representing a SFP cage.
+
required:
- reg
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index 72e7aaf7242e..f878c1103463 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -9,6 +9,7 @@ Required properties:
- "aspeed,ast2400-mac"
- "aspeed,ast2500-mac"
+ - "aspeed,ast2600-mac"
- reg: Address and length of the register set for the device
- interrupts: Should contain ethernet controller interrupt
@@ -23,6 +24,13 @@ Optional properties:
- no-hw-checksum: Used to disable HW checksum support. Here for backward
compatibility as the driver now should have correct defaults based on
the SoC.
+- clocks: In accordance with the generic clock bindings. Must describe the MAC
+ IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
+ required MAC clock must be the first cell.
+- clock-names:
+
+ - "MACCLK": The MAC IP clock
+ - "RCLK": Clock gate for the RMII RCLK
Example:
diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt
index b92e927808b6..cfe0e5991d46 100644
--- a/Documentation/devicetree/bindings/net/lpc-eth.txt
+++ b/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -10,6 +10,11 @@ Optional properties:
absent, "rmii" is assumed.
- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+Optional subnodes:
+- mdio : specifies the mdio bus, used as a container for phy nodes according to
+ phy.txt in the same directory
+
+
Example:
mac: ethernet@31060000 {
diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt
new file mode 100644
index 000000000000..a5507dc499bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/pn532.txt
@@ -0,0 +1,46 @@
+* NXP Semiconductors PN532 NFC Controller
+
+Required properties:
+- compatible: Should be
+ - "nxp,pn532" Place a node with this inside the devicetree node of the bus
+ where the NFC chip is connected to.
+ Currently the kernel has phy bindings for uart and i2c.
+ - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
+ - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
+
+Required properties if connected on i2c:
+- clock-frequency: I²C work frequency.
+- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
+- interrupts: GPIO interrupt to which the chip is connected
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN532 on I2C2):
+
+&i2c2 {
+
+
+ pn532: nfc@24 {
+
+ compatible = "nxp,pn532";
+
+ reg = <0x24>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+ };
+};
+
+Example (for PN532 connected via uart):
+
+uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+
+ pn532: nfc {
+ compatible = "nxp,pn532";
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
deleted file mode 100644
index 2efe3886b95b..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* NXP Semiconductors PN532 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN532 on I2C2):
-
-&i2c2 {
-
-
- pn532: pn532@24 {
-
- compatible = "nxp,pn532-i2c";
-
- reg = <0x24>;
- clock-frequency = <400000>;
-
- interrupt-parent = <&gpio1>;
- interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-
- };
-};
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
new file mode 100644
index 000000000000..5a6c9d20c0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar803x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR803x PHY
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Bindings for Qualcomm Atheros AR803x PHYs
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ qca,clk-out-frequency:
+ description: Clock output frequency in Hertz.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 25000000, 50000000, 62500000, 125000000 ]
+
+ qca,clk-out-strength:
+ description: Clock output driver strength.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2 ]
+
+ qca,keep-pll-enabled:
+ description: |
+ If set, keep the PLL enabled even if there is no link. Useful if you
+ want to use the clock output without an ethernet link.
+
+ Only supported on the AR8031.
+ type: boolean
+
+ vddio-supply:
+ description: |
+ RGMII I/O voltage regulator (see regulator/regulator.yaml).
+
+ The PHY supports RGMII I/O voltages of 1.5V, 1.8V and 2.5V. You can
+ either connect this to the vddio-regulator (1.5V / 1.8V) or the
+ vddh-regulator (2.5V).
+
+ Only supported on the AR8031.
+
+ vddio-regulator:
+ type: object
+ description:
+ Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
+ allOf:
+ - $ref: /schemas/regulator/regulator.yaml
+
+ vddh-regulator:
+ type: object
+ description:
+ Dummy subnode to model the external connection of the PHY VDDH
+ regulator to VDDIO.
+ allOf:
+ - $ref: /schemas/regulator/regulator.yaml
+
+
+examples:
+ - |
+ #include <dt-bindings/net/qca-ar803x.h>
+
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rgmii-id";
+
+ ethernet-phy@0 {
+ reg = <0>;
+
+ qca,clk-out-frequency = <125000000>;
+ qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+ vddio-supply = <&vddio>;
+
+ vddio: vddio-regulator {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/net/qca-ar803x.h>
+
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rgmii-id";
+
+ ethernet-phy@0 {
+ reg = <0>;
+
+ qca,clk-out-frequency = <50000000>;
+ qca,keep-pll-enabled;
+
+ vddio-supply = <&vddh>;
+
+ vddh: vddh-regulator {
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
new file mode 100644
index 000000000000..7f84df9790e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ether.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Electronics SH EtherMAC
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+maintainers:
+ - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,gether-r8a7740 # device is a part of R8A7740 SoC
+ - renesas,gether-r8a77980 # device is a part of R8A77980 SoC
+ - renesas,ether-r7s72100 # device is a part of R7S72100 SoC
+ - renesas,ether-r7s9210 # device is a part of R7S9210 SoC
+ - items:
+ - enum:
+ - renesas,ether-r8a7778 # device is a part of R8A7778 SoC
+ - renesas,ether-r8a7779 # device is a part of R8A7779 SoC
+ - enum:
+ - renesas,rcar-gen1-ether # a generic R-Car Gen1 device
+ - items:
+ - enum:
+ - renesas,ether-r8a7745 # device is a part of R8A7745 SoC
+ - renesas,ether-r8a7743 # device is a part of R8A7743 SoC
+ - renesas,ether-r8a7790 # device is a part of R8A7790 SoC
+ - renesas,ether-r8a7791 # device is a part of R8A7791 SoC
+ - renesas,ether-r8a7793 # device is a part of R8A7793 SoC
+ - renesas,ether-r8a7794 # device is a part of R8A7794 SoC
+ - enum:
+ - renesas,rcar-gen2-ether # a generic R-Car Gen2 or RZ/G1 device
+
+ reg:
+ items:
+ - description: E-DMAC/feLic registers
+ - description: TSU registers
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ description: number of address cells for the MDIO bus
+ const: 1
+
+ '#size-cells':
+ description: number of size cells on the MDIO bus
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ pinctrl-0: true
+
+ pinctrl-names: true
+
+ renesas,no-ether-link:
+ type: boolean
+ description:
+ specify when a board does not provide a proper Ether LINK signal
+
+ renesas,ether-link-active-low:
+ type: boolean
+ description:
+ specify when the Ether LINK signal is active-low instead of normal
+ active-high
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy-mode
+ - phy-handle
+ - '#address-cells'
+ - '#size-cells'
+ - clocks
+ - pinctrl-0
+
+examples:
+ # Lager board
+ - |
+ #include <dt-bindings/clock/r8a7790-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
+ reg = <0 0xee700000 0 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ phy-mode = "rmii";
+ phy-handle = <&phy1>;
+ pinctrl-0 = <&ether_pins>;
+ pinctrl-names = "default";
+ renesas,ether-link-active-low;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&phy1_pins>;
+ pinctrl-names = "default";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
deleted file mode 100644
index abc36274227c..000000000000
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* Renesas Electronics SH EtherMAC
-
-This file provides information on what the device node for the SH EtherMAC
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
- "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
- "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC.
- "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC.
- "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC.
- "renesas,ether-r8a7779" if the device is a part of R8A7779 SoC.
- "renesas,ether-r8a7790" if the device is a part of R8A7790 SoC.
- "renesas,ether-r8a7791" if the device is a part of R8A7791 SoC.
- "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC.
- "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
- "renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
- "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
- "renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
- "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
- "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
- device.
-
- When compatible with the generic version, nodes must list
- the SoC-specific version corresponding to the platform
- first followed by the generic version.
-
-- reg: offset and length of (1) the E-DMAC/feLic register block (required),
- (2) the TSU register block (optional).
-- interrupts: interrupt specifier for the sole interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
- Ether LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the Ether LINK signal is
- active-low instead of normal active-high.
-
-Example (Lager board):
-
- ethernet@ee700000 {
- compatible = "renesas,ether-r8a7790",
- "renesas,rcar-gen2-ether";
- reg = <0 0xee700000 0 0x400>;
- interrupt-parent = <&gic>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
- phy-mode = "rmii";
- phy-handle = <&phy1>;
- pinctrl-0 = <&ether_pins>;
- pinctrl-names = "default";
- renesas,ether-link-active-low;
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&phy1_pins>;
- pinctrl-names = "default";
- };
- };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
new file mode 100644
index 000000000000..81ae8cafabc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
+
+maintainers:
+ - Grygorii Strashko <grygorii.strashko@ti.com>
+ - Sekhar Nori <nsekhar@ti.com>
+
+description:
+ The 3-port switch gigabit ethernet subsystem provides ethernet packet
+ communication and can be configured as an ethernet switch. It provides the
+ gigabit media independent interface (GMII),reduced gigabit media
+ independent interface (RGMII), reduced media independent interface (RMII),
+ the management data input output (MDIO) for physical layer device (PHY)
+ management.
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,am335x-cpsw-switch
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,am4372-cpsw-switch
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,dra7-cpsw-switch
+ - const: ti,cpsw-switch
+
+ reg:
+ maxItems: 1
+ description:
+ The physical base address and size of full the CPSW module IO range
+
+ ranges: true
+
+ clocks:
+ maxItems: 1
+ description: CPSW functional clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: fck
+
+ interrupts:
+ items:
+ - description: RX_THRESH interrupt
+ - description: RX interrupt
+ - description: TX interrupt
+ - description: MISC interrupt
+
+ interrupt-names:
+ items:
+ - const: "rx_thresh"
+ - const: "rx"
+ - const: "tx"
+ - const: "misc"
+
+ pinctrl-names: true
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to the system control device node which provides access to
+ efuse IO range with MAC addresses
+
+
+ ethernet-ports:
+ type: object
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^port@[0-9]+$":
+ type: object
+ minItems: 1
+ maxItems: 2
+ description: CPSW external ports
+
+ allOf:
+ - $ref: ethernet-controller.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+ enum: [1, 2]
+ description: CPSW port number
+
+ phys:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ maxItems: 1
+ description: phandle on phy-gmii-sel PHY
+
+ label:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ maxItems: 1
+ description: label associated with this port
+
+ ti,dual-emac-pvid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ minimum: 1
+ maximum: 1024
+ description:
+ Specifies default PORT VID to be used to segregate
+ ports. Default value - CPSW port number.
+
+ required:
+ - reg
+ - phys
+
+ mdio:
+ type: object
+ allOf:
+ - $ref: "ti,davinci-mdio.yaml#"
+ description:
+ CPSW MDIO bus.
+
+ cpts:
+ type: object
+ description:
+ The Common Platform Time Sync (CPTS) module
+
+ properties:
+ clocks:
+ maxItems: 1
+ description: CPTS reference clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: cpts
+
+ cpts_clock_mult:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Numerator to convert input clock ticks into ns
+
+ cpts_clock_shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Denominator to convert input clock ticks into ns.
+ Mult and shift will be calculated basing on CPTS rftclk frequency if
+ both cpts_clock_shift and cpts_clock_mult properties are not provided.
+
+ required:
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/dra7.h>
+
+ mac_sw: switch@0 {
+ compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&gmac_main_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ inctrl-names = "default", "sleep";
+
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ phy-handle = <&ethphy0_sw>;
+ phy-mode = "rgmii";
+ ti,dual_emac_pvid = <1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "wan";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ phy-handle = <&ethphy1_sw>;
+ phy-mode = "rgmii";
+ ti,dual_emac_pvid = <2>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x1000 0x100>;
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+
+ ethphy0_sw: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1_sw: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ cpts {
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+ clock-names = "cpts";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
new file mode 100644
index 000000000000..242ac4935a4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,davinci-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SoC Davinci/Keystone2 MDIO Controller
+
+maintainers:
+ - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description:
+ TI SoC Davinci/Keystone2 MDIO Controller
+
+allOf:
+ - $ref: "mdio.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,keystone_mdio
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,cpsw-mdio
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,am4372-mdio
+ - const: ti,cpsw-mdio
+ - const: ti,davinci_mdio
+
+ reg:
+ maxItems: 1
+
+ bus_freq:
+ maximum: 2500000
+ description:
+ MDIO Bus frequency
+
+ ti,hwmods:
+ description: TI hwmod name
+ deprecated: true
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string-array
+ - items:
+ const: davinci_mdio
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: ti,davinci_mdio
+ required:
+ - bus_freq
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ davinci_mdio: mdio@4a101000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a101000 0x1000>;
+ bus_freq = <1000000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
new file mode 100644
index 000000000000..6fe3e451da8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83869 ethernet PHY
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+
+description: |
+ The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
+ with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and
+ 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and
+ 100BASE-FX Fiber protocols.
+ This device interfaces to the MAC layer through Reduced GMII (RGMII) and
+ SGMII The DP83869HM supports Media Conversion in Managed mode. In this mode,
+ the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX
+ conversions. The DP83869HM can also support Bridge Conversion from RGMII to
+ SGMII and SGMII to RGMII.
+
+ Specifications about the charger can be found at:
+ http://www.ti.com/lit/ds/symlink/dp83869hm.pdf
+
+properties:
+ reg:
+ maxItems: 1
+
+ ti,min-output-impedance:
+ type: boolean
+ description: |
+ MAC Interface Impedance control to set the programmable output impedance
+ to a minimum value (35 ohms).
+
+ ti,max-output-impedance:
+ type: boolean
+ description: |
+ MAC Interface Impedance control to set the programmable output impedance
+ to a maximum value (70 ohms).
+
+ tx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+ ti,clk-output-sel:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
+
+ ti,op-mode:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ Operational mode for the PHY. If this is not set then the operational
+ mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
+
+required:
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/net/ti-dp83869.h>
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+ ti,max-output-impedance = "true";
+ ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index ae661e65354e..017128394a3e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -81,6 +81,12 @@ Optional properties:
Definition: Name of external front end module used. Some valid FEM names
for example: "microsemi-lx5586", "sky85703-11"
and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+ Usage: Optional
+ Value type: <empty>
+ Definition: Quirk specifying that the firmware expects the 8bit version
+ of the host capability QMI request
+- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
Example (to supply PCI based wifi block details):
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index bb2fcde6f7ff..f38950560982 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -35,3 +35,29 @@ Examples:
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
};
};
+
+&mmc3 {
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
+};