diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
14 files changed, 526 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml new file mode 100644 index 000000000000..aa3162c74833 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom ASP 2.0 Ethernet controller + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom Ethernet controller first introduced with 72165 + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm74165-asp + - const: brcm,asp-v2.1 + - items: + - enum: + - brcm,bcm72165-asp + - const: brcm,asp-v2.0 + + "#address-cells": + const: 1 + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: true + + interrupts: + minItems: 1 + items: + - description: RX/TX interrupt + - description: Port 0 Wake-on-LAN + - description: Port 1 Wake-on-LAN + + clocks: + maxItems: 1 + + ethernet-ports: + type: object + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-9]+$": + type: object + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: Port number + + brcm,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ASP Channel Number + + The depacketizer channel that consumes packets from + the unimac/port. + + required: + - reg + - brcm,channel + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + ASP internal UniMAC MDIO bus + +required: + - compatible + - reg + - interrupts + - clocks + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@9c00000 { + compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + reg = <0x9c00000 0x1fff14>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x0 0x9c00000 0x1fff14>; + clocks = <&scmi 14>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@c614 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xc614 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + mdio@ce14 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xce14 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + brcm,channel = <8>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + brcm,channel = <9>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index 0be426ee1e44..6684810fcbf0 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -22,6 +22,8 @@ properties: - brcm,genet-mdio-v3 - brcm,genet-mdio-v4 - brcm,genet-mdio-v5 + - brcm,asp-v2.0-mdio + - brcm,asp-v2.1-mdio - brcm,unimac-mdio reg: diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 9c494957a07a..e42ea28d6ab4 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can - const: allwinner,sun8i-r40-can + - const: allwinner,sun20i-d1-can reg: maxItems: 1 @@ -37,8 +38,9 @@ properties: if: properties: compatible: - contains: - const: allwinner,sun8i-r40-can + enum: + - allwinner,sun8i-r40-can + - allwinner,sun20i-d1-can then: required: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 67879aab623b..bb518c831f7b 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -122,8 +122,6 @@ required: - compatible - reg - reg-names - - interrupts - - interrupt-names - clocks - clock-names - bosch,mram-cfg @@ -132,6 +130,7 @@ additionalProperties: false examples: - | + // Example with interrupts #include <dt-bindings/clock/imx6sx-clock.h> can@20e8000 { compatible = "bosch,m_can"; @@ -149,4 +148,21 @@ examples: }; }; + - | + // Example with timer polling + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index e3501bfa22e9..170e23f0610d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 @@ -21,8 +24,10 @@ Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. Example: tcan4x5x: tcan4x5x@0 { diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml index 897d2cbda45b..64d57c343e6f 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -46,6 +46,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx mailbox buffer count (CAN FD) + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8d971813bab6..ec74a660beda 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -36,7 +36,7 @@ additionalProperties: true $defs: ethernet-ports: description: A DSA switch without any extra port properties - $ref: '#/' + $ref: '#' patternProperties: "^(ethernet-)?ports$": diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index 31cc0c412805..e74502a0afe8 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -19,10 +19,12 @@ properties: enum: - mediatek,mt2701-eth - mediatek,mt7623-eth + - mediatek,mt7621-eth - mediatek,mt7622-eth - mediatek,mt7629-eth - mediatek,mt7981-eth - mediatek,mt7986-eth + - mediatek,mt7988-eth - ralink,rt5350-eth reg: @@ -32,7 +34,7 @@ properties: clock-names: true interrupts: - minItems: 3 + minItems: 1 maxItems: 4 power-domains: @@ -60,6 +62,12 @@ properties: Phandle to the mediatek hifsys controller used to provide various clocks and reset to the system. + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + mediatek,sgmiisys: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 @@ -121,6 +129,8 @@ allOf: - const: gp1 - const: gp2 + mediatek,infracfg: false + mediatek,pctl: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,6 +145,32 @@ allOf: properties: compatible: contains: + enum: + - mediatek,mt7621-eth + then: + properties: + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ethif + - const: fe + + mediatek,infracfg: false + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: const: mediatek,mt7622-eth then: properties: @@ -159,6 +195,8 @@ allOf: - const: sgmii_ck - const: eth2pll + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 1 maxItems: 1 @@ -204,12 +242,6 @@ allOf: - const: sgmii_ck - const: eth2pll - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the syscon node that handles the path from GMAC to - PHY variants. - mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -250,6 +282,8 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -286,6 +320,67 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 34 + maxItems: 34 + + clock-names: + items: + - const: crypto + - const: fe + - const: gp2 + - const: gp1 + - const: gp3 + - const: ethwarp_wocpu2 + - const: ethwarp_wocpu1 + - const: ethwarp_wocpu0 + - const: esw + - const: netsys0 + - const: netsys1 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: top_usxgmii0_sel + - const: top_usxgmii1_sel + - const: top_sgm0_sel + - const: top_sgm1_sel + - const: top_xfi_phy0_xtal_sel + - const: top_xfi_phy1_xtal_sel + - const: top_eth_gmii_sel + - const: top_eth_refck_50m_sel + - const: top_eth_sys_200m_sel + - const: top_eth_sys_sel + - const: top_eth_xgmii_sel + - const: top_eth_mii_sel + - const: top_netsys_sel + - const: top_netsys_500m_sel + - const: top_netsys_pao_2x_sel + - const: top_netsys_sync_250m_sel + - const: top_netsys_ppefb_250m_sel + - const: top_netsys_warp_sel + - const: wocpu1 + - const: wocpu0 + - const: xgp1 + - const: xgp2 + - const: xgp3 + mediatek,sgmiisys: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf6f..26688e2302ea 100644 --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,40 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC. diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt deleted file mode 100644 index 27db496f1ce8..000000000000 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS DWMAC Ethernet controller - -The device inherits all the properties of the dwmac/stmmac devices -described in the file stmmac.txt in the current directory with the -following changes. - -Required properties on all platforms: - -- compatible: For the OX820 SoC, it should be : - - "oxsemi,ox820-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - For the OX810SE SoC, it should be : - - "oxsemi,ox810se-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - -- clocks: Should contain phandles to the following clocks -- clock-names: Should contain the following: - - "stmmaceth" for the host clock - see stmmac.txt - - "gmac" for the peripheral gate clock - -- oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Example : - -etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - -}; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 161d28919316..3acd09f0da86 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -75,6 +75,7 @@ properties: description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object @@ -82,6 +83,7 @@ properties: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 7f324c6da915..70bbc4220e2a 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -80,6 +80,7 @@ properties: "output" means GMAC provides the reference clock. $ref: /schemas/types.yaml#/definitions/string enum: [input, output] + default: input rockchip,grf: description: The phandle of the syscon node for the general register file. diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml new file mode 100644 index 000000000000..8ec30b3eb760 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSSG PRUSS Ethernet + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +description: + Ethernet based on the Programmable Real-Time Unit and Industrial + Communication Subsystem. + +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + +properties: + compatible: + enum: + - ti,am654-icssg-prueth # for AM65x SoC family + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MSMC SRAM node + + dmas: + maxItems: 10 + + dma-names: + items: + - const: tx0-0 + - const: tx0-1 + - const: tx0-2 + - const: tx0-3 + - const: tx1-0 + - const: tx1-1 + - const: tx1-2 + - const: tx1-3 + - const: rx0 + - const: rx1 + + ti,mii-g-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_G_RT module's syscon regmap. + + ti,mii-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_RT module's syscon regmap + + interrupts: + maxItems: 2 + description: + Interrupt specifiers to TX timestamp IRQ. + + interrupt-names: + items: + - const: tx_ts0 + - const: tx_ts1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + ^port@[0-1]$: + type: object + description: ICSSG PRUETH external ports + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [0, 1] + description: ICSSG PRUETH port number + + interrupts: + maxItems: 1 + + ti,syscon-rgmii-delay: + items: + - items: + - description: phandle to system controller node + - description: The offset to ICSSG control register + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to system controller node and register offset + to ICSSG control register for RGMII transmit delay + + required: + - reg + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - sram + - dmas + - dma-names + - ethernet-ports + - ti,mii-g-rt + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + /* Example k3-am654 base board SR2.0, dual-emac */ + pruss2_eth: ethernet { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf", + "ti-pruss/am65x-rtu0-prueth-fw.elf", + "ti-pruss/am65x-txpru0-prueth-fw.elf", + "ti-pruss/am65x-pru1-prueth-fw.elf", + "ti-pruss/am65x-rtu1-prueth-fw.elf", + "ti-pruss/am65x-txpru1-prueth-fw.elf"; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ti,mii-g-rt = <&icssg2_mii_g_rt>; + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + pruss2_emac0: port@0 { + reg = <0>; + phy-handle = <&pruss2_eth0_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 24>; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + pruss2_emac1: port@1 { + reg = <1>; + phy-handle = <&pruss2_eth1_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 25>; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 67b63f119f64..252207adbc54 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7981-wmac - mediatek,mt7986-wmac reg: @@ -71,6 +72,14 @@ properties: ieee80211-freq-limit: true + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array description: @@ -84,6 +93,7 @@ properties: - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data + deprecated: true big-endian: $ref: /schemas/types.yaml#/definitions/flag @@ -258,7 +268,8 @@ examples: interrupt-parent = <&cpuintc>; interrupts = <6>; - mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; }; - | |