diff options
Diffstat (limited to 'Documentation/devicetree/bindings/opp')
13 files changed, 1473 insertions, 1592 deletions
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml new file mode 100644 index 000000000000..51f62c3ae194 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 CPU OPP + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + For some SoCs, the CPU frequency subset and voltage value of each + OPP varies based on the silicon variant in use. Allwinner Process + Voltage Scaling Tables defines the voltage and frequency value based + on the speedbin blown in the efuse combination. The + sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to + provide the OPP framework with required information. + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: allwinner,sun50i-h6-operating-points + + nvmem-cells: + description: | + A phandle pointing to a nvmem-cells node representing the efuse + registers that has information about the speedbin that is used + to select the right frequency/voltage value pair. Please refer + the for nvmem-cells bindings + Documentation/devicetree/bindings/nvmem/nvmem.txt and also + examples below. + + opp-shared: true + +required: + - compatible + - nvmem-cells + +patternProperties: + "^opp-[0-9]+$": + type: object + + properties: + opp-hz: true + clock-latency-ns: true + + patternProperties: + "^opp-microvolt-speed[0-9]$": true + + required: + - opp-hz + - opp-microvolt-speed0 + - opp-microvolt-speed1 + - opp-microvolt-speed2 + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + cpu_opp_table: opp-table { + compatible = "allwinner,sun50i-h6-operating-points"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-480000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <480000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-720000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <720000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-816000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <816000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-888000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <888000000>; + + opp-microvolt-speed0 = <940000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-1080000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1080000000>; + + opp-microvolt-speed0 = <1060000>; + opp-microvolt-speed1 = <880000>; + opp-microvolt-speed2 = <840000>; + }; + + opp-1320000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1320000000>; + + opp-microvolt-speed0 = <1160000>; + opp-microvolt-speed1 = <940000>; + opp-microvolt-speed2 = <900000>; + }; + + opp-1488000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1488000000>; + + opp-microvolt-speed0 = <1160000>; + opp-microvolt-speed1 = <1000000>; + opp-microvolt-speed2 = <960000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml new file mode 100644 index 000000000000..02d1d2c17129 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CPU OPP (Operating Performance Points) + +description: + TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx + families, the CPU frequencies subset and the voltage value of each + OPP vary based on the silicon variant used. The data sheet sections + corresponding to "Operating Performance Points" describe the frequency + and voltage values based on device type and speed bin information + blown in corresponding eFuse bits as referred to by the Technical + Reference Manual. + + This document extends the operating-points-v2 binding by providing + the hardware description for the scheme mentioned above. + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-ti-cpu + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + points to syscon node representing the control module + register space of the SoC. + + opp-shared: true + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + additionalProperties: false + + properties: + clock-latency-ns: true + opp-hz: true + opp-microvolt: true + opp-supported-hw: true + opp-suspend: true + turbo-mode: true + + required: + - opp-hz + - opp-supported-hw + +required: + - compatible + - syscon + +additionalProperties: false + +examples: + - | + opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml new file mode 100644 index 000000000000..07e26c267815 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) v1 + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +description: |+ + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This binding only supports voltage-frequency pairs. + +select: true + +properties: + operating-points: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Frequency in kHz + - description: Voltage for OPP in uV + + +additionalProperties: true +examples: + - | + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = + /* kHz uV */ + <792000 1100000>, + <396000 950000>, + <198000 850000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml new file mode 100644 index 000000000000..b1bb87c865ed --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -0,0 +1,247 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) Common Properties + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +description: | + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This describes the OPPs belonging to a device. + +select: false + +properties: + $nodename: + pattern: '^opp-table(-[a-z0-9]+)?$' + + opp-shared: + description: + Indicates that device nodes using this OPP Table Node's phandle switch + their DVFS state together, i.e. they share clock/voltage/current lines. + Missing property means devices have independent clock/voltage/current + lines, but they share OPP tables. + type: boolean + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + description: + One or more OPP nodes describing voltage-current-frequency combinations. + Their name isn't significant but their phandle can be used to reference an + OPP. These are mandatory except for the case where the OPP table is + present only to indicate dependency between devices using the opp-shared + property. + + properties: + opp-hz: + description: + Frequency in Hz, expressed as a 64-bit big-endian integer. This is a + required property for all device nodes, unless another "required" + property to uniquely identify the OPP nodes exists. Devices like power + domains must have another (implementation dependent) property. + + Entries for multiple clocks shall be provided in the same field, as + array of frequencies. The OPP binding doesn't provide any provisions + to relate the values to their clocks or the order in which the clocks + need to be configured and that is left for the implementation + specific binding. + minItems: 1 + maxItems: 32 + + opp-microvolt: + description: | + Voltage for the OPP + + A single regulator's voltage is specified with an array of size one or three. + Single entry is for target voltage and three entries are for <target min max> + voltages. + + Entries for multiple regulators shall be provided in the same field separated + by angular brackets <>. The OPP binding doesn't provide any provisions to + relate the values to their power supplies or the order in which the supplies + need to be configured and that is left for the implementation specific + binding. + + Entries for all regulators shall be of the same size, i.e. either all use a + single value or triplets. + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + opp-microamp: + description: | + The maximum current drawn by the device in microamperes considering + system specific parameters (such as transients, process, aging, + maximum operating temperature range etc.) as necessary. This may be + used to set the most efficient regulator operating mode. + + Should only be set if opp-microvolt or opp-microvolt-<name> is set for + the OPP. + + Entries for multiple regulators shall be provided in the same field + separated by angular brackets <>. If current values aren't required + for a regulator, then it shall be filled with 0. If current values + aren't required for any of the regulators, then this field is not + required. The OPP binding doesn't provide any provisions to relate the + values to their power supplies or the order in which the supplies need + to be configured and that is left for the implementation specific + binding. + minItems: 1 + maxItems: 8 # Should be enough regulators + + opp-microwatt: + description: | + The power for the OPP in micro-Watts. + + Entries for multiple regulators shall be provided in the same field + separated by angular brackets <>. If power values aren't required + for a regulator, then it shall be filled with 0. If power values + aren't required for any of the regulators, then this field is not + required. The OPP binding doesn't provide any provisions to relate the + values to their power supplies or the order in which the supplies need + to be configured and that is left for the implementation specific + binding. + minItems: 1 + maxItems: 8 # Should be enough regulators + + opp-level: + description: + A value representing the performance level of the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + opp-peak-kBps: + description: + Peak bandwidth in kilobytes per second, expressed as an array of + 32-bit big-endian integers. Each element of the array represents the + peak bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. + minItems: 1 + maxItems: 32 # Should be enough + + opp-avg-kBps: + description: + Average bandwidth in kilobytes per second, expressed as an array + of 32-bit big-endian integers. Each element of the array represents the + average bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. This property is only + meaningful in OPP tables where opp-peak-kBps is present. + minItems: 1 + maxItems: 32 # Should be enough + + clock-latency-ns: + description: + Specifies the maximum possible transition latency (in nanoseconds) for + switching to this OPP from any other OPP. + + turbo-mode: + description: + Marks the OPP to be used only for turbo modes. Turbo mode is available + on some platforms, where the device can run over its operating + frequency for a short duration of time limited by the device's power, + current and thermal limits. + type: boolean + + opp-suspend: + description: + Marks the OPP to be used during device suspend. If multiple OPPs in + the table have this, the OPP with highest opp-hz will be used. + type: boolean + + opp-supported-hw: + description: | + This property allows a platform to enable only a subset of the OPPs + from the larger set present in the OPP table, based on the current + version of the hardware (already known to the operating system). + + Each block present in the array of blocks in this property, represents + a sub-group of hardware versions supported by the OPP. i.e. <sub-group + A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these + sub-groups match the hardware's version. + + Each sub-group is a platform defined array representing the hierarchy + of hardware versions supported by the platform. For a platform with + three hierarchical levels of version (X.Y.Z), this field shall look + like + + opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>. + + Each level (eg. X1) in version hierarchy is represented by a 32 bit + value, one bit per version and so there can be maximum 32 versions per + level. Logical AND (&) operation is performed for each level with the + hardware's level version and a non-zero output for _all_ the levels in + a sub-group means the OPP is supported by hardware. A value of + 0xFFFFFFFF for each level in the sub-group will enable the OPP for all + versions for the hardware. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 32 + items: + minItems: 1 + maxItems: 4 + + required-opps: + description: + This contains phandle to an OPP node in another device's OPP table. It + may contain an array of phandles, where each phandle points to an OPP + of a different device. It should not contain multiple phandles to the + OPP nodes in the same OPP table. This specifies the minimum required + OPP of the device(s), whose OPP's phandle is present in this property, + for the functioning of the current device at the current OPP (where + this property is present). + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + patternProperties: + '^opp-microvolt-': + description: + Named opp-microvolt property. This is exactly similar to the above + opp-microvolt property, but allows multiple voltage ranges to be + provided for the same OPP. At runtime, the platform can pick a <name> + and matching opp-microvolt-<name> property will be enabled for all + OPPs. If the platform doesn't pick a specific <name> or the <name> + doesn't match with any opp-microvolt-<name> properties, then + opp-microvolt property shall be used, if present. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + '^opp-microamp-': + description: + Named opp-microamp property. Similar to opp-microvolt-<name> property, + but for microamp instead. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 # Should be enough regulators + + '^opp-microwatt-': + description: + Named opp-microwatt property. Similar to opp-microamp-<name> property, + but for microwatt instead. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 # Should be enough regulators + + dependencies: + opp-avg-kBps: [ opp-peak-kBps ] + +required: + - compatible + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml new file mode 100644 index 000000000000..fd04d060c1de --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -0,0 +1,309 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. NVMEM OPP + +maintainers: + - Ilia Lin <ilia.lin@kernel.org> + +allOf: + - $ref: opp-v2-base.yaml# + +description: | + In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996, + the CPU frequencies subset and voltage value of each OPP varies based on + the silicon variant in use. + Qualcomm Technologies, Inc. Process Voltage Scaling Tables + defines the voltage and frequency value based on the speedbin blown in + the efuse combination. + The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide + the OPP framework with required information (existing HW bitmap). + This is used to determine the voltage and frequency value for each OPP of + operating-points-v2 table when it is parsed by the OPP framework. + +properties: + compatible: + enum: + - operating-points-v2-krait-cpu + - operating-points-v2-kryo-cpu + + nvmem-cells: + description: | + A phandle pointing to a nvmem-cells node representing the + efuse registers that has information about the + speedbin that is used to select the right frequency/voltage + value pair. + + opp-shared: true + +patternProperties: + '^opp-?[0-9]+$': + type: object + additionalProperties: false + + properties: + opp-hz: true + + opp-microvolt: true + + opp-peak-kBps: true + + opp-supported-hw: + description: | + A single 32 bit bitmap value, representing compatible HW. + Bitmap for MSM8996 format: + 0: MSM8996, speedbin 0 + 1: MSM8996, speedbin 1 + 2: MSM8996, speedbin 2 + 3: MSM8996, speedbin 3 + 4-31: unused + + Bitmap for MSM8996SG format (speedbin shifted of 4 left): + 0-3: unused + 4: MSM8996SG, speedbin 0 + 5: MSM8996SG, speedbin 1 + 6: MSM8996SG, speedbin 2 + 7-31: unused + + Bitmap for IPQ806x SoC: + 0: IPQ8062 + 1: IPQ8064/IPQ8066/IPQ8068 + 2: IPQ8065/IPQ8069 + 3-31: unused + + Other platforms use bits directly corresponding to speedbin index. + + clock-latency-ns: true + + required-opps: true + + patternProperties: + '^opp-microvolt-speed[0-9]+-pvs[0-9]+$': true + + required: + - opp-hz + +required: + - compatible + +if: + required: + - nvmem-cells +then: + patternProperties: + '^opp-?[0-9]+$': + required: + - opp-supported-hw + +additionalProperties: false + +examples: + - | + / { + model = "Qualcomm Technologies, Inc. DB820c"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU2>; + }; + + core1 { + cpu = <&CPU3>; + }; + }; + }; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-microvolt = <905000 905000 1140000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp1>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-microvolt = <1140000 905000 1140000>; + opp-supported-hw = <0x5>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp2>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-microvolt = <1140000 905000 1140000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp3>; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-microvolt = <905000 905000 1140000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp1>; + }; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-microvolt = <1140000 905000 1140000>; + opp-supported-hw = <0x6>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp4>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-microvolt = <1140000 905000 1140000>; + opp-supported-hw = <0x4>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp5>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-microvolt = <1140000 905000 1140000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + required-opps = <&cpr_opp6>; + }; + }; + + /* Dummy opp table to give example for named opp-microvolt */ + opp-table-2 { + compatible = "operating-points-v2-krait-cpu"; + nvmem-cells = <&speedbin_efuse>; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>; + opp-microvolt-speed0-pvs1 = <925000 878750 971250>; + opp-microvolt-speed0-pvs2 = <875000 831250 918750>; + opp-microvolt-speed0-pvs3 = <800000 760000 840000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <100000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + + qfprom: qfprom@74000 { + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; + reg = <0x00074000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + speedbin_efuse: speedbin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml new file mode 100644 index 000000000000..a30ef93213c0 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm OPP + +maintainers: + - Niklas Cassel <nks@flawful.org> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-qcom-level + +patternProperties: + '^opp-?[0-9]+$': + type: object + additionalProperties: false + + properties: + opp-level: true + + qcom,opp-fuse-level: + description: | + A positive value representing the fuse corner/level associated with + this OPP node. Sometimes several corners/levels shares a certain fuse + corner/level. A fuse corner/level contains e.g. ref uV, min uV, + and max uV. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + + required: + - opp-level + - qcom,opp-fuse-level + +required: + - compatible + +additionalProperties: false + +examples: + - | + cpr_opp_table: opp-table-cpr { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml new file mode 100644 index 000000000000..6972d76233aa --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml @@ -0,0 +1,475 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2 + +unevaluatedProperties: false + +examples: + - | + /* + * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states + * together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + }; + + cpu0_opp_table0: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states + * independently. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@1 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@2 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + clocks = <&clk_controller 2>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@3 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + clocks = <&clk_controller 3>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply3>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * Missing opp-shared property means CPUs switch DVFS states + * independently. + */ + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch + * DVFS state together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <100>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + + cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <101>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1050000 1045000 1055000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + opp-suspend; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1075000>; + opp-microamp = <100000>; + clock-latency-ns = <400000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1010000 1110000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + turbo-mode; + }; + }; + + - | + /* Example 4: Handling multiple regulators */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "foo,cpu-type"; + device_type = "cpu"; + reg = <0>; + + vcc0-supply = <&cpu_supply0>; + vcc1-supply = <&cpu_supply1>; + vcc2-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu0_opp_table4>; + }; + }; + + cpu0_opp_table4: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000>, /* Supply 0 */ + <960000>, /* Supply 1 */ + <960000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000001 { + opp-hz = /bits/ 64 <1000000001>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000002 { + opp-hz = /bits/ 64 <1000000002>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <0>, /* Supply 1 doesn't need this */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + }; + + - | + /* + * Example 5: opp-supported-hw + * (example: three level hierarchy of versions: cuts, substrate and process) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + cpu-supply = <&cpu_supply>; + operating-points-v2 = <&cpu0_opp_table_slow>; + }; + }; + + cpu0_opp_table_slow: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-600000000 { + /* + * Supports all substrate and process versions for 0xF + * cuts, i.e. only first four cuts. + */ + opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>; + opp-hz = /bits/ 64 <600000000>; + }; + + opp-800000000 { + /* + * Supports: + * - cuts: only one, 6th cut (represented by 6th bit). + * - substrate: supports 16 different substrate versions + * - process: supports 9 different process versions + */ + opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>; + opp-hz = /bits/ 64 <800000000>; + }; + + opp-900000000 { + /* + * Supports: + * - All cuts and substrate where process version is 0x2. + * - All cuts and process where substrate version is 0x2. + */ + opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, + <0xFFFFFFFF 0x01 0xFFFFFFFF>; + opp-hz = /bits/ 64 <900000000>; + }; + }; + + - | + /* + * Example 6: opp-microvolt-<name>, opp-microamp-<name>: + * (example: device with two possible microvolt ranges: slow and fast) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points-v2 = <&cpu0_opp_table6>; + }; + }; + + cpu0_opp_table6: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt-slow = <915000 900000 925000>; + opp-microvolt-fast = <975000 970000 985000>; + opp-microamp-slow = <70000>; + opp-microamp-fast = <71000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ + <925000 910000 935000>; /* Supply vcc1 */ + opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ + <965000 960000 975000>; /* Supply vcc1 */ + opp-microamp = <70000>; /* Will be used for both slow/fast */ + }; + }; + + - | + /* + * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware, + * distinct clock controls but two sets of clock/voltage/current lines. + */ + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x100>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 0>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x101>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 1>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x102>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 2>; + operating-points-v2 = <&cpu_opp1_table>; + }; + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x103>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 3>; + operating-points-v2 = <&cpu_opp1_table>; + }; + + }; + + cpu_opp0_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + }; + + cpu_opp1_table: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt deleted file mode 100644 index 68592271461f..000000000000 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ /dev/null @@ -1,548 +0,0 @@ -Generic OPP (Operating Performance Points) Bindings ----------------------------------------------------- - -Devices work at voltage-current-frequency combinations and some implementations -have the liberty of choosing these. These combinations are called Operating -Performance Points aka OPPs. This document defines bindings for these OPPs -applicable across wide range of devices. For illustration purpose, this document -uses CPU as a device. - -This document contain multiple versions of OPP binding and only one of them -should be used per device. - -Binding 1: operating-points -============================ - -This binding only supports voltage-frequency pairs. - -Properties: -- operating-points: An array of 2-tuples items, and each item consists - of frequency and voltage like <freq-kHz vol-uV>. - freq: clock frequency in kHz - vol: voltage in microvolt - -Examples: - -cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; -}; - - -Binding 2: operating-points-v2 -============================ - -* Property: operating-points-v2 - -Devices supporting OPPs must set their "operating-points-v2" property with -phandle to a OPP table in their DT node. The OPP core will use this phandle to -find the operating points for the device. - -This can contain more than one phandle for power domain providers that provide -multiple power domains. That is, one phandle for each power domain. If only one -phandle is available, then the same OPP table will be used for all power domains -provided by the power domain provider. - -If required, this can be extended for SoC vendor specific bindings. Such bindings -should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt -and should have a compatible description like: "operating-points-v2-<vendor>". - -* OPP Table Node - -This describes the OPPs belonging to a device. This node can have following -properties: - -Required properties: -- compatible: Allow OPPs to express their compatibility. It should be: - "operating-points-v2". - -- OPP nodes: One or more OPP nodes describing voltage-current-frequency - combinations. Their name isn't significant but their phandle can be used to - reference an OPP. - -Optional properties: -- opp-shared: Indicates that device nodes using this OPP Table Node's phandle - switch their DVFS state together, i.e. they share clock/voltage/current lines. - Missing property means devices have independent clock/voltage/current lines, - but they share OPP tables. - -- status: Marks the OPP table enabled/disabled. - - -* OPP Node - -This defines voltage-current-frequency combinations along with other related -properties. - -Required properties: -- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a - required property for all device nodes but devices like power domains. The - power domain nodes must have another (implementation dependent) property which - uniquely identifies the OPP nodes. - -Optional properties: -- opp-microvolt: voltage in micro Volts. - - A single regulator's voltage is specified with an array of size one or three. - Single entry is for target voltage and three entries are for <target min max> - voltages. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. The OPP binding doesn't provide any provisions to - relate the values to their power supplies or the order in which the supplies - need to be configured and that is left for the implementation specific - binding. - - Entries for all regulators shall be of the same size, i.e. either all use a - single value or triplets. - -- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to - the above opp-microvolt property, but allows multiple voltage ranges to be - provided for the same OPP. At runtime, the platform can pick a <name> and - matching opp-microvolt-<name> property will be enabled for all OPPs. If the - platform doesn't pick a specific <name> or the <name> doesn't match with any - opp-microvolt-<name> properties, then opp-microvolt property shall be used, if - present. - -- opp-microamp: The maximum current drawn by the device in microamperes - considering system specific parameters (such as transients, process, aging, - maximum operating temperature range etc.) as necessary. This may be used to - set the most efficient regulator operating mode. - - Should only be set if opp-microvolt is set for the OPP. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. If current values aren't required for a regulator, - then it shall be filled with 0. If current values aren't required for any of - the regulators, then this field is not required. The OPP binding doesn't - provide any provisions to relate the values to their power supplies or the - order in which the supplies need to be configured and that is left for the - implementation specific binding. - -- opp-microamp-<name>: Named opp-microamp property. Similar to - opp-microvolt-<name> property, but for microamp instead. - -- opp-level: A value representing the performance level of the device, - expressed as a 32-bit integer. - -- clock-latency-ns: Specifies the maximum possible transition latency (in - nanoseconds) for switching to this OPP from any other OPP. - -- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is - available on some platforms, where the device can run over its operating - frequency for a short duration of time limited by the device's power, current - and thermal limits. - -- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs - in the table have this, the OPP with highest opp-hz will be used. - -- opp-supported-hw: This enables us to select only a subset of OPPs from the - larger OPP table, based on what version of the hardware we are running on. We - still can't have multiple nodes with the same opp-hz value in OPP table. - - It's a user defined array containing a hierarchy of hardware version numbers, - supported by the OPP. For example: a platform with hierarchy of three levels - of versions (A, B and C), this field should be like <X Y Z>, where X - corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z - corresponds to version hierarchy C. - - Each level of hierarchy is represented by a 32 bit value, and so there can be - only 32 different supported version per hierarchy. i.e. 1 bit per version. A - value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy - level. And a value of 0x00000000 will disable the OPP completely, and so we - never want that to happen. - - If 32 values aren't sufficient for a version hierarchy, than that version - hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the - above example, Z1 & Z2 refer to the version hierarchy Z. - -- status: Marks the node enabled/disabled. - -- required-opps: This contains phandle to an OPP node in another device's OPP - table. It may contain an array of phandles, where each phandle points to an - OPP of a different device. It should not contain multiple phandles to the OPP - nodes in the same OPP table. This specifies the minimum required OPP of the - device(s), whose OPP's phandle is present in this property, for the - functioning of the current device at the current OPP (where this property is - present). - -Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states -independently. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "qcom,krait"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@1 { - compatible = "qcom,krait"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@2 { - compatible = "qcom,krait"; - reg = <2>; - next-level-cache = <&L2>; - clocks = <&clk_controller 2>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@3 { - compatible = "qcom,krait"; - reg = <3>; - next-level-cache = <&L2>; - clocks = <&clk_controller 3>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply3>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - /* - * Missing opp-shared property means CPUs switch DVFS states - * independently. - */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000; - lock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch -DVFS state together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@100 { - compatible = "arm,cortex-a15"; - reg = <100>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - - cpu@101 { - compatible = "arm,cortex-a15"; - reg = <101>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - }; - - cluster0_opp: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; - - cluster1_opp: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1050000 1045000 1055000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - opp-suspend; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1075000>; - opp-microamp = <100000>; - clock-latency-ns = <400000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1100000 1010000 1110000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - turbo-mode; - }; - }; -}; - -Example 4: Handling multiple regulators - -/ { - cpus { - cpu@0 { - compatible = "vendor,cpu-type"; - ... - - vcc0-supply = <&cpu_supply0>; - vcc1-supply = <&cpu_supply1>; - vcc2-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000>, /* Supply 0 */ - <960000>, /* Supply 1 */ - <960000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <0>, /* Supply 1 doesn't need this */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - }; -}; - -Example 5: opp-supported-hw -(example: three level hierarchy of versions: cuts, substrate and process) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - cpu-supply = <&cpu_supply> - operating-points-v2 = <&cpu0_opp_table_slow>; - }; - }; - - opp_table { - compatible = "operating-points-v2"; - opp-shared; - - opp-600000000 { - /* - * Supports all substrate and process versions for 0xF - * cuts, i.e. only first four cuts. - */ - opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <915000 900000 925000>; - ... - }; - - opp-800000000 { - /* - * Supports: - * - cuts: only one, 6th cut (represented by 6th bit). - * - substrate: supports 16 different substrate versions - * - process: supports 9 different process versions - */ - opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <915000 900000 925000>; - ... - }; - }; -}; - -Example 6: opp-microvolt-<name>, opp-microamp-<name>: -(example: device with two possible microvolt ranges: slow and fast) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt-slow = <915000 900000 925000>; - opp-microvolt-fast = <975000 970000 985000>; - opp-microamp-slow = <70000>; - opp-microamp-fast = <71000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ - <925000 910000 935000>; /* Supply vcc1 */ - opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ - <965000 960000 975000>; /* Supply vcc1 */ - opp-microamp = <70000>; /* Will be used for both slow/fast */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt deleted file mode 100644 index 4751029b9b74..000000000000 --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +++ /dev/null @@ -1,795 +0,0 @@ -Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings -=================================== - -In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996, -the CPU frequencies subset and voltage value of each OPP varies based on -the silicon variant in use. -Qualcomm Technologies, Inc. Process Voltage Scaling Tables -defines the voltage and frequency value based on the msm-id in SMEM -and speedbin blown in the efuse combination. -The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC -to provide the OPP framework with required information (existing HW bitmap). -This is used to determine the voltage and frequency value for each OPP of -operating-points-v2 table when it is parsed by the OPP framework. - -Required properties: --------------------- -In 'cpu' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. - -Optional properties: --------------------- -In 'cpu' nodes: -- power-domains: A phandle pointing to the PM domain specifier which provides - the performance states available for active state management. - Please refer to the power-domains bindings - Documentation/devicetree/bindings/power/power_domain.txt - and also examples below. -- power-domain-names: Should be - - 'cpr' for qcs404. - -In 'operating-points-v2' table: -- nvmem-cells: A phandle pointing to a nvmem-cells node representing the - efuse registers that has information about the - speedbin that is used to select the right frequency/voltage - value pair. - Please refer the for nvmem-cells - bindings Documentation/devicetree/bindings/nvmem/nvmem.txt - and also examples below. - -In every OPP node: -- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW. - Bitmap: - 0: MSM8996 V3, speedbin 0 - 1: MSM8996 V3, speedbin 1 - 2: MSM8996 V3, speedbin 2 - 3: unused - 4: MSM8996 SG, speedbin 0 - 5: MSM8996 SG, speedbin 1 - 6: MSM8996 SG, speedbin 2 - 7-31: unused - -Example 1: ---------- - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x0>; - enable-method = "psci"; - clocks = <&kryocc 0>; - cpu-supply = <&pm8994_s11_saw>; - operating-points-v2 = <&cluster0_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x1>; - enable-method = "psci"; - clocks = <&kryocc 0>; - cpu-supply = <&pm8994_s11_saw>; - operating-points-v2 = <&cluster0_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - }; - - CPU2: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x100>; - enable-method = "psci"; - clocks = <&kryocc 1>; - cpu-supply = <&pm8994_s11_saw>; - operating-points-v2 = <&cluster1_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU3: cpu@101 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x101>; - enable-method = "psci"; - clocks = <&kryocc 1>; - cpu-supply = <&pm8994_s11_saw>; - operating-points-v2 = <&cluster1_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_1>; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU2>; - }; - - core1 { - cpu = <&CPU3>; - }; - }; - }; - }; - - cluster0_opp: opp_table0 { - compatible = "operating-points-v2-kryo-cpu"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x77>; - clock-latency-ns = <200000>; - }; - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-422400000 { - opp-hz = /bits/ 64 <422400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-460800000 { - opp-hz = /bits/ 64 <460800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-537600000 { - opp-hz = /bits/ 64 <537600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-556800000 { - opp-hz = /bits/ 64 <556800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-614400000 { - opp-hz = /bits/ 64 <614400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-729600000 { - opp-hz = /bits/ 64 <729600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-768000000 { - opp-hz = /bits/ 64 <768000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-844800000 { - opp-hz = /bits/ 64 <844800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x77>; - clock-latency-ns = <200000>; - }; - opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-960000000 { - opp-hz = /bits/ 64 <960000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1036800000 { - opp-hz = /bits/ 64 <1036800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1190400000 { - opp-hz = /bits/ 64 <1190400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1228800000 { - opp-hz = /bits/ 64 <1228800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x5>; - clock-latency-ns = <200000>; - }; - opp-1363200000 { - opp-hz = /bits/ 64 <1363200000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x72>; - clock-latency-ns = <200000>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x5>; - clock-latency-ns = <200000>; - }; - opp-1440000000 { - opp-hz = /bits/ 64 <1440000000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1478400000 { - opp-hz = /bits/ 64 <1478400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - }; - opp-1497600000 { - opp-hz = /bits/ 64 <1497600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x4>; - clock-latency-ns = <200000>; - }; - opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1593600000 { - opp-hz = /bits/ 64 <1593600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x71>; - clock-latency-ns = <200000>; - }; - opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x20>; - clock-latency-ns = <200000>; - }; - opp-2188800000 { - opp-hz = /bits/ 64 <2188800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x10>; - clock-latency-ns = <200000>; - }; - }; - - cluster1_opp: opp_table1 { - compatible = "operating-points-v2-kryo-cpu"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x77>; - clock-latency-ns = <200000>; - }; - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-460800000 { - opp-hz = /bits/ 64 <460800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-537600000 { - opp-hz = /bits/ 64 <537600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-556800000 { - opp-hz = /bits/ 64 <556800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-614400000 { - opp-hz = /bits/ 64 <614400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-729600000 { - opp-hz = /bits/ 64 <729600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-748800000 { - opp-hz = /bits/ 64 <748800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-883200000 { - opp-hz = /bits/ 64 <883200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1036800000 { - opp-hz = /bits/ 64 <1036800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1190400000 { - opp-hz = /bits/ 64 <1190400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1248000000 { - opp-hz = /bits/ 64 <1248000000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - opp-microvolt = <905000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1363200000 { - opp-hz = /bits/ 64 <1363200000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1440000000 { - opp-hz = /bits/ 64 <1440000000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1478400000 { - opp-hz = /bits/ 64 <1478400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1555200000 { - opp-hz = /bits/ 64 <1555200000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1593600000 { - opp-hz = /bits/ 64 <1593600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1632000000 { - opp-hz = /bits/ 64 <1632000000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1670400000 { - opp-hz = /bits/ 64 <1670400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1708800000 { - opp-hz = /bits/ 64 <1708800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1747200000 { - opp-hz = /bits/ 64 <1747200000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x70>; - clock-latency-ns = <200000>; - }; - opp-1785600000 { - opp-hz = /bits/ 64 <1785600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x7>; - clock-latency-ns = <200000>; - }; - opp-1804800000 { - opp-hz = /bits/ 64 <1804800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x6>; - clock-latency-ns = <200000>; - }; - opp-1824000000 { - opp-hz = /bits/ 64 <1824000000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x71>; - clock-latency-ns = <200000>; - }; - opp-1900800000 { - opp-hz = /bits/ 64 <1900800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x74>; - clock-latency-ns = <200000>; - }; - opp-1920000000 { - opp-hz = /bits/ 64 <1920000000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - }; - opp-1977600000 { - opp-hz = /bits/ 64 <1977600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x30>; - clock-latency-ns = <200000>; - }; - opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - }; - opp-2054400000 { - opp-hz = /bits/ 64 <2054400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x30>; - clock-latency-ns = <200000>; - }; - opp-2073600000 { - opp-hz = /bits/ 64 <2073600000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - }; - opp-2150400000 { - opp-hz = /bits/ 64 <2150400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x31>; - clock-latency-ns = <200000>; - }; - opp-2246400000 { - opp-hz = /bits/ 64 <2246400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x10>; - clock-latency-ns = <200000>; - }; - opp-2342400000 { - opp-hz = /bits/ 64 <2342400000>; - opp-microvolt = <1140000 905000 1140000>; - opp-supported-hw = <0x10>; - clock-latency-ns = <200000>; - }; - }; - -.... - -reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; -.... - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; - no-map; - }; -.... -}; - -smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; -}; - -soc { -.... - qfprom: qfprom@74000 { - compatible = "qcom,qfprom"; - reg = <0x00074000 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - .... - speedbin_efuse: speedbin@133 { - reg = <0x133 0x1>; - bits = <5 3>; - }; - }; -}; - -Example 2: ---------- - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CPU0: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x100>; - .... - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU1: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x101>; - .... - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU2: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x102>; - .... - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU3: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x103>; - .... - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - }; - - cpu_opp_table: cpu-opp-table { - compatible = "operating-points-v2-kryo-cpu"; - opp-shared; - - opp-1094400000 { - opp-hz = /bits/ 64 <1094400000>; - required-opps = <&cpr_opp1>; - }; - opp-1248000000 { - opp-hz = /bits/ 64 <1248000000>; - required-opps = <&cpr_opp2>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - required-opps = <&cpr_opp3>; - }; - }; - - cpr_opp_table: cpr-opp-table { - compatible = "operating-points-v2-qcom-level"; - - cpr_opp1: opp1 { - opp-level = <1>; - qcom,opp-fuse-level = <1>; - }; - cpr_opp2: opp2 { - opp-level = <2>; - qcom,opp-fuse-level = <2>; - }; - cpr_opp3: opp3 { - opp-level = <3>; - qcom,opp-fuse-level = <3>; - }; - }; - -.... - -soc { -.... - cpr: power-controller@b018000 { - compatible = "qcom,qcs404-cpr", "qcom,cpr"; - reg = <0x0b018000 0x1000>; - .... - vdd-apc-supply = <&pms405_s3>; - #power-domain-cells = <0>; - operating-points-v2 = <&cpr_opp_table>; - .... - }; -}; diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt deleted file mode 100644 index 32eb0793c7e6..000000000000 --- a/Documentation/devicetree/bindings/opp/qcom-opp.txt +++ /dev/null @@ -1,19 +0,0 @@ -Qualcomm OPP bindings to describe OPP nodes - -The bindings are based on top of the operating-points-v2 bindings -described in Documentation/devicetree/bindings/opp/opp.txt -Additional properties are described below. - -* OPP Table Node - -Required properties: -- compatible: Allow OPPs to express their compatibility. It should be: - "operating-points-v2-qcom-level" - -* OPP Node - -Required properties: -- qcom,opp-fuse-level: A positive value representing the fuse corner/level - associated with this OPP node. Sometimes several corners/levels shares - a certain fuse corner/level. A fuse corner/level contains e.g. ref uV, - min uV, and max uV. diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt deleted file mode 100644 index 7deae57a587b..000000000000 --- a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt +++ /dev/null @@ -1,167 +0,0 @@ -Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings -=================================== - -For some SoCs, the CPU frequency subset and voltage value of each OPP -varies based on the silicon variant in use. Allwinner Process Voltage -Scaling Tables defines the voltage and frequency value based on the -speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver -reads the efuse value from the SoC to provide the OPP framework with -required information. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'allwinner,sun50i-h6-operating-points'. -- nvmem-cells: A phandle pointing to a nvmem-cells node representing the - efuse registers that has information about the speedbin - that is used to select the right frequency/voltage value - pair. Please refer the for nvmem-cells bindings - Documentation/devicetree/bindings/nvmem/nvmem.txt and - also examples below. - -In every OPP node: -- opp-microvolt-<name>: Voltage in micro Volts. - At runtime, the platform can pick a <name> and - matching opp-microvolt-<name> property. - [See: opp.txt] - HW: <name>: - sun50i-h6 speed0 speed1 speed2 - -Example 1: ---------- - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <1>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <2>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <3>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - }; - - cpu_opp_table: opp_table { - compatible = "allwinner,sun50i-h6-operating-points"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - opp@480000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <480000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@720000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <720000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@816000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <816000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@888000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <888000000>; - - opp-microvolt-speed0 = <940000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@1080000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1080000000>; - - opp-microvolt-speed0 = <1060000>; - opp-microvolt-speed1 = <880000>; - opp-microvolt-speed2 = <840000>; - }; - - opp@1320000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1320000000>; - - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <940000>; - opp-microvolt-speed2 = <900000>; - }; - - opp@1488000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1488000000>; - - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <1000000>; - opp-microvolt-speed2 = <960000>; - }; - }; -.... -soc { -.... - sid: sid@3006000 { - compatible = "allwinner,sun50i-h6-sid"; - reg = <0x03006000 0x400>; - #address-cells = <1>; - #size-cells = <1>; - .... - speedbin_efuse: speed@1c { - reg = <0x1c 4>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml new file mode 100644 index 000000000000..693f22539606 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP compatible OPP supply + +description: + OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse + registers, which contain OPP-specific voltage information tailored + for the specific device. This binding provides the information + needed to describe such a hardware values and relate them to program + the primary regulator during an OPP transition. + + Also, some supplies may have an associated vbb-supply, an Adaptive + Body Bias regulator, which must transition in a specific sequence + w.r.t the vdd-supply and clk when making an OPP transition. By + supplying two regulators to the device that will undergo OPP + transitions, we can use the multi-regulator support implemented by + the OPP core to describe both regulators the platform needs. The + OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml + provides further information (refer to Example 4 Handling multiple + regulators). + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + $nodename: + pattern: '^opp-supply(@[0-9a-f]+)?$' + + compatible: + oneOf: + - description: Basic OPP supply controlling VDD and VBB + const: ti,omap-opp-supply + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with + VBB. + const: ti,omap5-opp-supply + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB + const: ti,omap5-core-opp-supply + + reg: + maxItems: 1 + + ti,absolute-max-voltage-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Absolute maximum voltage for the OPP supply in micro-volts. + minimum: 750000 + maximum: 1500000 + + ti,efuse-settings: + description: An array of u32 tuple items providing information about + optimized efuse configuration. + minItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Reference voltage in micro-volts (OPP Voltage) + minimum: 750000 + maximum: 1500000 + multipleOf: 10000 + - description: efuse offset where the optimized voltage is located + multipleOf: 4 + maximum: 256 + +required: + - compatible + - ti,absolute-max-voltage-uv + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,omap-opp-supply + then: + required: + - reg + - ti,efuse-settings + +additionalProperties: false + +examples: + - | + opp-supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + - | + opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = + /* uV offset */ + <1060000 0x0>, + <1160000 0x4>, + <1210000 0x8>; + ti,absolute-max-voltage-uv = <1500000>; + }; diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt deleted file mode 100644 index 832346e489a3..000000000000 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ /dev/null @@ -1,63 +0,0 @@ -Texas Instruments OMAP compatible OPP supply description - -OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which -contain data that can be used to adjust voltages programmed for some of their -supplies for more efficient operation. This binding provides the information -needed to read these values and use them to program the main regulator during -an OPP transitions. - -Also, some supplies may have an associated vbb-supply which is an Adaptive Body -Bias regulator which much be transitioned in a specific sequence with regards -to the vdd-supply and clk when making an OPP transition. By supplying two -regulators to the device that will undergo OPP transitions we can make use -of the multi regulator binding that is part of the OPP core described here [1] -to describe both regulators needed by the platform. - -[1] Documentation/devicetree/bindings/opp/opp.txt - -Required Properties for Device Node: -- vdd-supply: phandle to regulator controlling VDD supply -- vbb-supply: phandle to regulator controlling Body Bias supply - (Usually Adaptive Body Bias regulator) - -Required Properties for opp-supply node: -- compatible: Should be one of: - "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB - "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD - along with VBB - "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD - but no VBB. -- reg: Address and length of the efuse register set for the device (mandatory - only for "ti,omap5-opp-supply") -- ti,efuse-settings: An array of u32 tuple items providing information about - optimized efuse configuration. Each item consists of the following: - volt: voltage in uV - reference voltage (OPP voltage) - efuse_offseet: efuse offset from reg where the optimized voltage is stored. -- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. - -Example: - -/* Device Node (CPU) */ -cpus { - cpu0: cpu@0 { - device_type = "cpu"; - - ... - - vdd-supply = <&vcc>; - vbb-supply = <&abb_mpu>; - }; -}; - -/* OMAP OPP Supply with Class0 registers */ -opp_supply_mpu: opp_supply@4a003b20 { - compatible = "ti,omap5-opp-supply"; - reg = <0x4a003b20 0x8>; - ti,efuse-settings = < - /* uV offset */ - 1060000 0x0 - 1160000 0x4 - 1210000 0x8 - >; - ti,absolute-max-voltage-uv = <1500000>; -}; |