diff options
Diffstat (limited to 'Documentation/devicetree/bindings/opp')
5 files changed, 226 insertions, 68 deletions
diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml new file mode 100644 index 000000000000..02d1d2c17129 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CPU OPP (Operating Performance Points) + +description: + TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx + families, the CPU frequencies subset and the voltage value of each + OPP vary based on the silicon variant used. The data sheet sections + corresponding to "Operating Performance Points" describe the frequency + and voltage values based on device type and speed bin information + blown in corresponding eFuse bits as referred to by the Technical + Reference Manual. + + This document extends the operating-points-v2 binding by providing + the hardware description for the scheme mentioned above. + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-ti-cpu + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + points to syscon node representing the control module + register space of the SoC. + + opp-shared: true + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + additionalProperties: false + + properties: + clock-latency-ns: true + opp-hz: true + opp-microvolt: true + opp-supported-hw: true + opp-suspend: true + turbo-mode: true + + required: + - opp-hz + - opp-supported-hw + +required: + - compatible + - syscon + +additionalProperties: false + +examples: + - | + opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 47e6f36b7637..e2f8f7af3cf4 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -56,7 +56,7 @@ patternProperties: need to be configured and that is left for the implementation specific binding. minItems: 1 - maxItems: 16 + maxItems: 32 items: maxItems: 1 diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml index bbbad31ae4ca..fd04d060c1de 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -26,7 +26,9 @@ description: | properties: compatible: - const: operating-points-v2-kryo-cpu + enum: + - operating-points-v2-krait-cpu + - operating-points-v2-kryo-cpu nvmem-cells: description: | @@ -47,6 +49,8 @@ patternProperties: opp-microvolt: true + opp-peak-kBps: true + opp-supported-hw: description: | A single 32 bit bitmap value, representing compatible HW. @@ -63,14 +67,22 @@ patternProperties: 5: MSM8996SG, speedbin 1 6: MSM8996SG, speedbin 2 7-31: unused - enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, - 0x9, 0xd, 0xe, 0xf, - 0x10, 0x20, 0x30, 0x70] + + Bitmap for IPQ806x SoC: + 0: IPQ8062 + 1: IPQ8064/IPQ8066/IPQ8068 + 2: IPQ8065/IPQ8069 + 3-31: unused + + Other platforms use bits directly corresponding to speedbin index. clock-latency-ns: true required-opps: true + patternProperties: + '^opp-microvolt-speed[0-9]+-pvs[0-9]+$': true + required: - opp-hz @@ -256,6 +268,22 @@ examples: }; }; + /* Dummy opp table to give example for named opp-microvolt */ + opp-table-2 { + compatible = "operating-points-v2-krait-cpu"; + nvmem-cells = <&speedbin_efuse>; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>; + opp-microvolt-speed0-pvs1 = <925000 878750 971250>; + opp-microvolt-speed0-pvs2 = <875000 831250 918750>; + opp-microvolt-speed0-pvs3 = <800000 760000 840000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <100000>; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml new file mode 100644 index 000000000000..693f22539606 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP compatible OPP supply + +description: + OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse + registers, which contain OPP-specific voltage information tailored + for the specific device. This binding provides the information + needed to describe such a hardware values and relate them to program + the primary regulator during an OPP transition. + + Also, some supplies may have an associated vbb-supply, an Adaptive + Body Bias regulator, which must transition in a specific sequence + w.r.t the vdd-supply and clk when making an OPP transition. By + supplying two regulators to the device that will undergo OPP + transitions, we can use the multi-regulator support implemented by + the OPP core to describe both regulators the platform needs. The + OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml + provides further information (refer to Example 4 Handling multiple + regulators). + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + $nodename: + pattern: '^opp-supply(@[0-9a-f]+)?$' + + compatible: + oneOf: + - description: Basic OPP supply controlling VDD and VBB + const: ti,omap-opp-supply + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with + VBB. + const: ti,omap5-opp-supply + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB + const: ti,omap5-core-opp-supply + + reg: + maxItems: 1 + + ti,absolute-max-voltage-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Absolute maximum voltage for the OPP supply in micro-volts. + minimum: 750000 + maximum: 1500000 + + ti,efuse-settings: + description: An array of u32 tuple items providing information about + optimized efuse configuration. + minItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Reference voltage in micro-volts (OPP Voltage) + minimum: 750000 + maximum: 1500000 + multipleOf: 10000 + - description: efuse offset where the optimized voltage is located + multipleOf: 4 + maximum: 256 + +required: + - compatible + - ti,absolute-max-voltage-uv + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,omap-opp-supply + then: + required: + - reg + - ti,efuse-settings + +additionalProperties: false + +examples: + - | + opp-supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + - | + opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = + /* uV offset */ + <1060000 0x0>, + <1160000 0x4>, + <1210000 0x8>; + ti,absolute-max-voltage-uv = <1500000>; + }; diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt deleted file mode 100644 index b70d326117cd..000000000000 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ /dev/null @@ -1,63 +0,0 @@ -Texas Instruments OMAP compatible OPP supply description - -OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which -contain data that can be used to adjust voltages programmed for some of their -supplies for more efficient operation. This binding provides the information -needed to read these values and use them to program the main regulator during -an OPP transitions. - -Also, some supplies may have an associated vbb-supply which is an Adaptive Body -Bias regulator which much be transitioned in a specific sequence with regards -to the vdd-supply and clk when making an OPP transition. By supplying two -regulators to the device that will undergo OPP transitions we can make use -of the multi regulator binding that is part of the OPP core described here [1] -to describe both regulators needed by the platform. - -[1] Documentation/devicetree/bindings/opp/opp-v2.yaml - -Required Properties for Device Node: -- vdd-supply: phandle to regulator controlling VDD supply -- vbb-supply: phandle to regulator controlling Body Bias supply - (Usually Adaptive Body Bias regulator) - -Required Properties for opp-supply node: -- compatible: Should be one of: - "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB - "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD - along with VBB - "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD - but no VBB. -- reg: Address and length of the efuse register set for the device (mandatory - only for "ti,omap5-opp-supply") -- ti,efuse-settings: An array of u32 tuple items providing information about - optimized efuse configuration. Each item consists of the following: - volt: voltage in uV - reference voltage (OPP voltage) - efuse_offseet: efuse offset from reg where the optimized voltage is stored. -- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. - -Example: - -/* Device Node (CPU) */ -cpus { - cpu0: cpu@0 { - device_type = "cpu"; - - ... - - vdd-supply = <&vcc>; - vbb-supply = <&abb_mpu>; - }; -}; - -/* OMAP OPP Supply with Class0 registers */ -opp_supply_mpu: opp_supply@4a003b20 { - compatible = "ti,omap5-opp-supply"; - reg = <0x4a003b20 0x8>; - ti,efuse-settings = < - /* uV offset */ - 1060000 0x0 - 1160000 0x4 - 1210000 0x8 - >; - ti,absolute-max-voltage-uv = <1500000>; -}; |