diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/hisilicon-pcie.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt deleted file mode 100644 index 0dcb87d6554f..000000000000 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ /dev/null @@ -1,85 +0,0 @@ -HiSilicon Hip05 and Hip06 PCIe host bridge DT description - -HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties -- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". -- reg: Should contain rc_dbi, config registers location and length. -- reg-names: Must include the following entries: - "rc_dbi": controller configuration registers; - "config": PCIe configuration space registers. -- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. -- port-id: Should be 0, 1, 2 or 3. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent. - -Hip05 Example (note that Hip06 is the same except compatible): - pcie@b0080000 { - compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; - reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; - reg-names = "rc_dbi", "config"; - bus-range = <0 15>; - msi-parent = <&its_pcie>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; - num-lanes = <8>; - port-id = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 - 0x0 0 0 2 &mbigen_pcie 2 11 - 0x0 0 0 3 &mbigen_pcie 3 12 - 0x0 0 0 4 &mbigen_pcie 4 13>; - }; - -HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. - -Some BIOSes place the host controller in a mode where it is ECAM -compliant for all devices other than the root complex. In such cases, -the host controller should be described as below. - -The properties and their meanings are identical to those described in -host-generic-pci.txt except as listed below. - -Properties of the host controller node that differ from -host-generic-pci.txt: - -- compatible : Must be "hisilicon,hip06-pcie-ecam", or - "hisilicon,hip07-pcie-ecam" - -- reg : Two entries: First the ECAM configuration space for any - other bus underneath the root bus. Second, the base - and size of the HiSilicon host bridge registers include - the RC's own config space. - -Example: - pcie0: pcie@a0090000 { - compatible = "hisilicon,hip06-pcie-ecam"; - reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */ - <0 0xa0090000 0 0x10000>; /* host bridge registers */ - bus-range = <0 31>; - msi-map = <0x0000 &its_dsa 0x0000 0x2000>; - msi-map-mask = <0xffff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000 - 0x01000000 0 0 0 0xb7ff0000 0 0x10000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 - 0x0 0 0 2 &mbigen_pcie0 650 4 - 0x0 0 0 3 &mbigen_pcie0 650 4 - 0x0 0 0 4 &mbigen_pcie0 650 4>; - }; |