summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt130
1 files changed, 0 insertions, 130 deletions
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
deleted file mode 100644
index fe80dda9bf73..000000000000
--- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs
-
-PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root
-ports supports a Gen2 1-lane Link and has PIPE interface to PHY.
-
-Required properties:
-- compatible: Should contain "mediatek,mt7623-pcie".
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe controller.
-- #address-cells: Address representation for root ports (must be 3)
-- #size-cells: Size representation for root ports (must be 2)
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - free_ck :for reference clock of PCIe subsys
- - sys_ck0 :for clock of Port0
- - sys_ck1 :for clock of Port1
- - sys_ck2 :for clock of Port2
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - pcie-rst0 :port0 reset
- - pcie-rst1 :port1 reset
- - pcie-rst2 :port2 reset
-- phys: List of PHY specifiers (used by generic PHY framework).
-- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
- number of PHYs as specified in *phys* property.
-- power-domains: A phandle and power domain specifier pair to the power domain
- which is responsible for collapsing and restoring power to the peripheral.
-- bus-range: Range of bus numbers associated with this controller.
-- ranges: Ranges for the PCI memory and I/O regions.
-
-In addition, the device tree node must have sub-nodes describing each
-PCIe port interface, having the following mandatory properties:
-
-Required properties:
-- device_type: Must be "pci"
-- reg: Only the first four bytes are used to refer to the correct bus number
- and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- num-lanes: Number of lanes to use for this port.
-
-Examples:
-
- hifsys: syscon@1a000000 {
- compatible = "mediatek,mt7623-hifsys",
- "mediatek,mt2701-hifsys",
- "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pcie: pcie-controller@1a140000 {
- compatible = "mediatek,mt7623-pcie";
- device_type = "pci";
- reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
- <0 0x1a142000 0 0x1000>, /* Port0 registers */
- <0 0x1a143000 0 0x1000>, /* Port1 registers */
- <0 0x1a144000 0 0x1000>; /* Port2 registers */
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 0>;
- interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
- <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
- <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <&hifsys CLK_HIFSYS_PCIE0>,
- <&hifsys CLK_HIFSYS_PCIE1>,
- <&hifsys CLK_HIFSYS_PCIE2>;
- clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
- resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
- <&hifsys MT2701_HIFSYS_PCIE1_RST>,
- <&hifsys MT2701_HIFSYS_PCIE2_RST>;
- reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
- phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>;
- phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
- bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */
- 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
-
- pcie@0,0 {
- device_type = "pci";
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
-
- pcie@1,0 {
- device_type = "pci";
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
-
- pcie@2,0 {
- device_type = "pci";
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
- };