summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml')
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml319
1 files changed, 319 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 000000000000..a24fb8307d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+ inherits all the common properties defined in snps,dw-pcie-ep.yaml. Some
+ of the controller instances are dual mode; they can work either in Root
+ Port mode or Endpoint mode but one at a time.
+
+ On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+ On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+ Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+ operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra194-pcie-ep
+ - nvidia,tegra234-pcie-ep
+
+ reg:
+ items:
+ - description: controller's application logic registers
+ - description: iATU and DMA registers. This is where the iATU (internal
+ Address Translation Unit) registers of the PCIe core are made
+ available for software access.
+ - description: aperture where the Root Port's own configuration
+ registers are available.
+ - description: aperture used to map the remote Root Complex address space
+
+ reg-names:
+ items:
+ - const: appl
+ - const: atu_dma
+ - const: dbi
+ - const: addr_space
+
+ interrupts:
+ items:
+ - description: controller interrupt
+
+ interrupt-names:
+ items:
+ - const: intr
+
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: core
+
+ resets:
+ items:
+ - description: APB bus interface reset
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: apb
+ - const: core
+
+ reset-gpios:
+ description: Must contain a phandle to a GPIO controller followed by GPIO
+ that is being used as PERST input signal. Please refer to pci.txt.
+
+ phys:
+ minItems: 1
+ maxItems: 8
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: p2u-0
+ - const: p2u-1
+ - const: p2u-2
+ - const: p2u-3
+ - const: p2u-4
+ - const: p2u-5
+ - const: p2u-6
+ - const: p2u-7
+
+ power-domains:
+ maxItems: 1
+ description: |
+ A phandle to the node that controls power to the respective PCIe
+ controller and a specifier name for the PCIe controller.
+
+ Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+ Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+ interconnects:
+ items:
+ - description: memory read client
+ - description: memory write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ dma-coherent: true
+
+ nvidia,bpmp:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Must contain a pair of phandles to BPMP controller node followed by
+ controller ID. Following are the controller IDs for each controller:
+
+ Tegra194
+
+ 0: C0
+ 1: C1
+ 2: C2
+ 3: C3
+ 4: C4
+ 5: C5
+
+ Tegra234
+
+ 0 : C0
+ 1 : C1
+ 2 : C2
+ 3 : C3
+ 4 : C4
+ 5 : C5
+ 6 : C6
+ 7 : C7
+ 8 : C8
+ 9 : C9
+ 10: C10
+
+ items:
+ - items:
+ - description: phandle to BPMP controller node
+ - description: PCIe controller ID
+ maximum: 10
+
+ nvidia,aspm-cmrt-us:
+ description: Common Mode Restore Time for proper operation of ASPM to be
+ specified in microseconds
+
+ nvidia,aspm-pwr-on-t-us:
+ description: Power On time for proper operation of ASPM to be specified in
+ microseconds
+
+ nvidia,aspm-l0s-entrance-latency-us:
+ description: ASPM L0s entrance latency to be specified in microseconds
+
+ vddio-pex-ctl-supply:
+ description: A phandle to the regulator supply for PCIe side band signals
+
+ nvidia,refclk-select-gpios:
+ maxItems: 1
+ description: GPIO used to enable REFCLK to controller from the host
+
+ nvidia,enable-ext-refclk:
+ description: |
+ This boolean property needs to be present if the controller is configured
+ to receive Reference Clock from the host.
+ NOTE: This is applicable only for Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,enable-srns:
+ description: |
+ This boolean property needs to be present if the controller is
+ configured to operate in SRNS (Separate Reference Clocks with No
+ Spread-Spectrum Clocking). NOTE: This is applicable only for
+ Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - reset-gpios
+ - vddio-pex-ctl-supply
+ - num-lanes
+ - phys
+ - phy-names
+ - nvidia,bpmp
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra194-clock.h>
+ #include <dt-bindings/gpio/tegra194-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra194-powergate.h>
+ #include <dt-bindings/reset/tegra194-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie-ep@141a0000 {
+ compatible = "nvidia,tegra194-pcie-ep";
+ reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+ <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+ nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+ GPIO_ACTIVE_HIGH>;
+
+ num-lanes = <8>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/gpio/tegra234-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/reset/tegra234-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie-ep@141a0000 {
+ compatible = "nvidia,tegra234-pcie-ep";
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+ reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+ <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ nvidia,enable-ext-refclk;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+ reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+ nvidia,refclk-select-gpios = <&gpio_aon
+ TEGRA234_AON_GPIO(AA, 4)
+ GPIO_ACTIVE_HIGH>;
+
+ num-lanes = <8>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+ };