summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml')
-rw-r--r--Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml221
1 files changed, 221 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
new file mode 100644
index 000000000000..452cee1aed32
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E WIZ (SERDES Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,j721e-wiz-16g
+ - ti,j721e-wiz-10g
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: clock-specifier to represent input to the WIZ
+
+ clock-names:
+ items:
+ - const: fck
+ - const: core_ref_clk
+ - const: ext_ref_clk
+
+ num-lanes:
+ minimum: 1
+ maximum: 4
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ ranges: true
+
+ assigned-clocks:
+ maxItems: 2
+
+ assigned-clock-parents:
+ maxItems: 2
+
+ typec-dir-gpios:
+ maxItems: 1
+ description:
+ GPIO to signal Type-C cable orientation for lane swap.
+ If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+ achieve the funtionality of an external type-C plug flip mux.
+
+ typec-dir-debounce-ms:
+ minimum: 100
+ maximum: 1000
+ default: 100
+ description:
+ Number of milliseconds to wait before sampling typec-dir-gpio.
+ If not specified, the default debounce of 100ms will be used.
+ Type-C spec states minimum CC pin debounce of 100 ms and maximum
+ of 200 ms. However, some solutions might need more than 200 ms.
+
+patternProperties:
+ "^pll[0|1]-refclk$":
+ type: object
+ description: |
+ WIZ node should have subnodes for each of the PLLs present in
+ the SERDES.
+ properties:
+ clocks:
+ maxItems: 2
+ description: Phandle to clock nodes representing the two inputs to PLL.
+
+ "#clock-cells":
+ const: 0
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ required:
+ - clocks
+ - "#clock-cells"
+ - assigned-clocks
+ - assigned-clock-parents
+
+ "^cmn-refclk1?-dig-div$":
+ type: object
+ description:
+ WIZ node should have subnodes for each of the PMA common refclock
+ provided by the SERDES.
+ properties:
+ clocks:
+ maxItems: 1
+ description: Phandle to the clock node representing the input to the
+ divider clock.
+
+ "#clock-cells":
+ const: 0
+
+ required:
+ - clocks
+ - "#clock-cells"
+
+ "^refclk-dig$":
+ type: object
+ description: |
+ WIZ node should have subnode for refclk_dig to select the reference
+ clock source for the reference clock used in the PHY and PMA digital
+ logic.
+ properties:
+ clocks:
+ maxItems: 4
+ description: Phandle to four clock nodes representing the inputs to
+ refclk_dig
+
+ "#clock-cells":
+ const: 0
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ required:
+ - clocks
+ - "#clock-cells"
+ - assigned-clocks
+ - assigned-clock-parents
+
+ "^serdes@[0-9a-f]+$":
+ type: object
+ description: |
+ WIZ node should have '1' subnode for the SERDES. It could be either
+ Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
+ bindings specified in
+ Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+ Torrent SERDES should follow the bindings specified in
+ Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+
+required:
+ - compatible
+ - power-domains
+ - clocks
+ - clock-names
+ - num-lanes
+ - "#address-cells"
+ - "#size-cells"
+ - "#reset-cells"
+ - ranges
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ wiz@5000000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+ assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5000000 0x5000000 0x10000>;
+
+ pll0-refclk {
+ clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 293 13>;
+ };
+
+ pll1-refclk {
+ clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 293 0>;
+ };
+
+ cmn-refclk-dig-div {
+ clocks = <&wiz1_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ cmn-refclk1-dig-div {
+ clocks = <&wiz1_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ refclk-dig {
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ serdes@5000000 {
+ compatible = "cdns,ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz0 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };