diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
7 files changed, 63 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 000000000000..24a0d06acd1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,43 @@ +Broadcom STB USB PHY + +Required properties: + - compatible: brcm,brcmstb-usb-phy + - reg: two offset and length pairs. + The first pair specifies a manditory set of memory mapped + registers used for general control of the PHY. + The second pair specifies optional registers used by some of + the SoCs that support USB 3.x + - #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt index 761c4bc24a9b..10efff28b52b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -15,7 +15,7 @@ Required properties For the child node: - #phy-cells: must be 0 Example: - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index 97977cd29a98..0aced97d8092 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -27,7 +27,16 @@ Sub-nodes optional properties: This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". -Example: +- brcm,rxaeq-mode: string that indicates the desired RX equalizer + mode, possible values are: + "off" (equivalent to not specifying the property) + "auto" + "manual" (brcm,rxaeq-value is used in that case) + +- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. Allowed range is 0..63. + +Example sata-phy@f0458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 1d25b04cd05e..6ac98b3b5f57 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -23,7 +23,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@020c9000 { +usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 91da947ae9b6..eeb9e1874ea6 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -4,10 +4,13 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. +- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. + "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index ace9cce2704a..99b651b33110 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -8,6 +8,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 SoC. + "renesas,usb2-phy-r8a77995" if the device is a part of an + R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index f9853156e311..64f7109aea1f 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available. The driver will only use those matching the phy_type. Example: - usbphy1: phy@00a01800 { + usbphy1: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, |