summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt14
1 files changed, 14 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 258a4648ab81..cf96b7c20e4d 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -29,6 +29,7 @@ Required properties:
"allwinner,sun50i-h5-pinctrl"
"allwinner,sun50i-h6-pinctrl"
"allwinner,sun50i-h6-r-pinctrl"
+ "allwinner,suniv-f1c100s-pinctrl"
"nextthing,gr8-pinctrl"
- reg: Should contain the register physical address and length for the
@@ -43,6 +44,19 @@ Note: For backward compatibility reasons, the hosc and losc clocks are only
required if you need to use the optional input-debounce property. Any new
device tree should set them.
+Each pin bank, depending on the SoC, can have an associated regulator:
+
+- vcc-pa-supply: for the A10, A20, A31, A31s, A80 and R40 SoCs
+- vcc-pb-supply: for the A31, A31s, A80 and V3s SoCs
+- vcc-pc-supply: for the A10, A20, A31, A31s, A64, A80, H5, R40 and V3s SoCs
+- vcc-pd-supply: for the A23, A31, A31s, A64, A80, A83t, H3, H5 and R40 SoCs
+- vcc-pe-supply: for the A10, A20, A31, A31s, A64, A80, R40 and V3s SoCs
+- vcc-pf-supply: for the A10, A20, A31, A31s, A80, R40 and V3s SoCs
+- vcc-pg-supply: for the A10, A20, A31, A31s, A64, A80, H3, H5, R40 and V3s SoCs
+- vcc-ph-supply: for the A31, A31s and A80 SoCs
+- vcc-pl-supply: for the r-pinctrl of the A64, A80 and A83t SoCs
+- vcc-pm-supply: for the r-pinctrl of the A31, A31s and A80 SoCs
+
Optional properties:
- input-debounce: Array of debouncing periods in microseconds. One period per
irq bank found in the controller. 0 if no setup required.