summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt66
1 files changed, 29 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
index 44ad670ae11e..bfa3703a7446 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
@@ -7,55 +7,47 @@ Note:
This binding doc is only for the IOMUXC1 support in A7 Domain and it only
supports generic pin config.
-Please also refer pinctrl-bindings.txt in this directory for generic pinctrl
-binding.
-
-=== Pin Controller Node ===
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding
+part and usage.
Required properties:
-- compatible: "fsl,imx7ulp-iomuxc1"
-- reg: Should contain the base physical address and size of the iomuxc
- registers.
-
-=== Pin Configuration Node ===
-- pinmux: One integers array, represents a group of pins mux setting.
- The format is pinmux = <PIN_FUNC_ID>, PIN_FUNC_ID is a pin working on
- a specific function.
-
- NOTE: i.MX7ULP PIN_FUNC_ID consists of 4 integers as it shares one mux
- and config register as follows:
- <mux_conf_reg input_reg mux_mode input_val>
-
- Refer to imx7ulp-pinfunc.h in in device tree source folder for all
- available imx7ulp PIN_FUNC_ID.
-
-Optional Properties:
-- drive-strength Integer. Controls Drive Strength
- 0: Standard
- 1: Hi Driver
-- drive-push-pull Bool. Enable Pin Push-pull
-- drive-open-drain Bool. Enable Pin Open-drian
-- slew-rate: Integer. Controls Slew Rate
- 0: Standard
- 1: Slow
-- bias-disable: Bool. Pull disabled
-- bias-pull-down: Bool. Pull down on pin
-- bias-pull-up: Bool. Pull up on pin
+- compatible: "fsl,imx7ulp-iomuxc1".
+- fsl,pins: Each entry consists of 5 integers which represents the mux
+ and config setting for one pin. The first 4 integers
+ <mux_conf_reg input_reg mux_mode input_val> are specified
+ using a PIN_FUNC_ID macro, which can be found in
+ imx7ulp-pinfunc.h in the device tree source folder.
+ The last integer CONFIG is the pad setting value like
+ pull-up on this pin.
+
+ Please refer to i.MX7ULP Reference Manual for detailed
+ CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_OBE (1 << 17)
+PAD_CTL_IBE (1 << 16)
+PAD_CTL_LK (1 << 16)
+PAD_CTL_DSE_HI (1 << 6)
+PAD_CTL_DSE_STD (0 << 6)
+PAD_CTL_ODE (1 << 5)
+PAD_CTL_PUSH_PULL (0 << 5)
+PAD_CTL_SRE_SLOW (1 << 2)
+PAD_CTL_SRE_STD (0 << 2)
+PAD_CTL_PE (1 << 0)
Examples:
#include "imx7ulp-pinfunc.h"
/* Pin Controller Node */
-iomuxc1: iomuxc@40ac0000 {
+iomuxc1: pinctrl@40ac0000 {
compatible = "fsl,imx7ulp-iomuxc1";
reg = <0x40ac0000 0x1000>;
/* Pin Configuration Node */
pinctrl_lpuart4: lpuart4grp {
- pinmux = <
- IMX7ULP_PAD_PTC3__LPUART4_RX
- IMX7ULP_PAD_PTC2__LPUART4_TX
+ fsl,pins = <
+ IMX7ULP_PAD_PTC3__LPUART4_RX 0x1
+ IMX7ULP_PAD_PTC2__LPUART4_TX 0x1
>;
- bias-pull-up;
};
};