summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml140
1 files changed, 140 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
new file mode 100644
index 000000000000..13b7ab9dd6d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic pin configuration node schema
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ Many data items that are represented in a pin configuration node are common
+ and generic. Pin control bindings should use the properties defined below
+ where they are applicable; not all of these properties are relevant or useful
+ for all hardware or binding structures. Each individual binding document
+ should state which of these generic properties, if any, are used, and the
+ structure of the DT nodes that contain these properties.
+
+properties:
+ bias-disable:
+ type: boolean
+ description: disable any pin bias
+
+ bias-high-impedance:
+ type: boolean
+ description: high impedance mode ("third-state", "floating")
+
+ bias-bus-hold:
+ type: boolean
+ description: latch weakly
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: pull up the pin. Takes as optional argument on hardware
+ supporting it the pull strength in Ohm.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: pull down the pin. Takes as optional argument on hardware
+ supporting it the pull strength in Ohm.
+
+ bias-pull-pin-default:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: use pin-default pull state. Takes as optional argument on
+ hardware supporting it the pull strength in Ohm.
+
+ drive-push-pull:
+ type: boolean
+ description: drive actively high and low
+
+ drive-open-drain:
+ type: boolean
+ description: drive with open drain
+
+ drive-open-source:
+ type: boolean
+ description: drive with open source
+
+ drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: sink or source at most X mA
+
+ drive-strength-microamp:
+ description: sink or source at most X uA
+
+ input-enable:
+ type: boolean
+ description: enable input on pin (no effect on output, such as
+ enabling an input buffer)
+
+ input-disable:
+ type: boolean
+ description: disable input on pin (no effect on output, such as
+ disabling an input buffer)
+
+ input-schmitt-enable:
+ type: boolean
+ description: enable schmitt-trigger mode
+
+ input-schmitt-disable:
+ type: boolean
+ description: disable schmitt-trigger mode
+
+ input-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Takes the debounce time in usec as argument or 0 to disable
+ debouncing
+
+ power-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: select between different power supplies
+
+ low-power-enable:
+ type: boolean
+ description: enable low power mode
+
+ low-power-disable:
+ type: boolean
+ description: disable low power mode
+
+ output-disable:
+ type: boolean
+ description: disable output on a pin (such as disable an output buffer)
+
+ output-enable:
+ type: boolean
+ description: enable output on a pin without actively driving it
+ (such as enabling an output buffer)
+
+ output-low:
+ type: boolean
+ description: set the pin to output mode with low level
+
+ output-high:
+ type: boolean
+ description: set the pin to output mode with high level
+
+ sleep-hardware-state:
+ type: boolean
+ description: indicate this is sleep related state which will be
+ programmed into the registers for the sleep state.
+
+ slew-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: set the slew rate
+
+ skew-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ this affects the expected clock skew on input pins
+ and the delay before latching a value to an output
+ pin. Typically indicates how many double-inverters are
+ used to delay the signal.