diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 86 |
1 files changed, 84 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index e17a399e0904..5e2bb2bf3a55 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -49,6 +49,12 @@ properties: description: The interrupt outputs to sysirq. maxItems: 1 + mediatek,rsel_resistance_in_si_unit: + type: boolean + description: | + Identifying i2c pins pull up/down type which is RSEL. It can support + RSEL define or si unit value(ohm) to set different resistance. + #PIN CONFIGURATION NODES patternProperties: '-pins$': @@ -82,9 +88,85 @@ patternProperties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] - bias-pull-down: true + bias-pull-down: + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" + define in mt8195. + For pull down type is RSEL, it can add RSEL define & resistance value(ohm) + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195. + oneOf: + - enum: [100, 101, 102, 103] + - description: mt8195 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + - description: mt8195 pull down RSEL type define value. + - enum: [75000, 5000] + - description: mt8195 pull down RSEL type si unit value(ohm). + + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-down = <MTK_PULL_SET_RSEL_001>; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-down = <75000>; + }; + }; - bias-pull-up: true + bias-pull-up: + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" + define in mt8195. + For pull up type is RSEL, it can add RSEL define & resistance value(ohm) + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. + oneOf: + - enum: [100, 101, 102, 103] + - description: mt8195 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + - description: mt8195 pull up RSEL type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] + - description: mt8195 pull up RSEL type si unit value(ohm). + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-up = <MTK_PULL_SET_RSEL_001>; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-up = <1000>; + }; + }; bias-disable: true |