diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 208 |
1 files changed, 0 insertions, 208 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt deleted file mode 100644 index a56cb882830c..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ /dev/null @@ -1,208 +0,0 @@ -Qualcomm MSM8996 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8996 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8996-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, - bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, - qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, - dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, - blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, - mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, - atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, - cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, - pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, - qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, - qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, - atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, - atest_usb20, atest_char0, dac_calib10, qdss_stm10, - qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, - blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, - qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, - qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, - dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, - qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, - dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, - dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, - dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, - sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, - qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, - uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, - blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, - qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, - blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, - cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, - blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, - qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, - isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, - qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, - sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, - gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, - qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, - tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, - qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, - sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, - sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, - ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, - blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, - pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, - qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, - qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, - gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 150>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; |