diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index d6f8adbf25c6..e5b8ff7f545b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -100,7 +100,10 @@ to specify in a pin configuration subnode: "dtest1", "dtest2", "dtest3", - "dtest4" + "dtest4", + And following values are supported by LV/MV GPIO subtypes: + "func3", + "func4" - bias-disable: Usage: optional @@ -185,6 +188,18 @@ to specify in a pin configuration subnode: Value type: <none> Definition: The specified pins are configured in open-source mode. +- qcom,analog-pass: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in analog-pass-through mode. + +- qcom,atest: + Usage: optional + Value type: <u32> + Definition: Selects ATEST rail to route to GPIO when it's configured + in analog-pass-through mode. + Valid values are 1-4 corresponding to ATEST1 to ATEST4. + Example: pm8921_gpio: gpio@150 { |