diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
15 files changed, 610 insertions, 412 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 017d9593573b..54631dc1adb0 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -34,22 +34,22 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index c643d6d44415..a90c0fe0495f 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -43,24 +43,24 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 1506726c7fea..c78ab7e2eee7 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -31,57 +31,57 @@ patternProperties: properties: function: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, - SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] groups: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, - SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt deleted file mode 100644 index d9b2100c98e8..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt +++ /dev/null @@ -1,81 +0,0 @@ -Ingenic XBurst pin controller - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may -be used as GPIOs, multiplexed device functions are configured within the -GPIO port configuration registers and it is typical to refer to pins using the -naming scheme "PxN" where x is a character identifying the GPIO port with -which the pin is associated and N is an integer from 0 to 31 identifying the -pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and -PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830 -contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the -jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins. - - -Required properties: --------------------- - - - compatible: One of: - - "ingenic,jz4740-pinctrl" - - "ingenic,jz4725b-pinctrl" - - "ingenic,jz4760-pinctrl" - - "ingenic,jz4760b-pinctrl" - - "ingenic,jz4770-pinctrl" - - "ingenic,jz4780-pinctrl" - - "ingenic,x1000-pinctrl" - - "ingenic,x1000e-pinctrl" - - "ingenic,x1500-pinctrl" - - "ingenic,x1830-pinctrl" - - reg: Address range of the pinctrl registers. - - -Required properties for sub-nodes (GPIO chips): ------------------------------------------------ - - - compatible: Must contain one of: - - "ingenic,jz4740-gpio" - - "ingenic,jz4760-gpio" - - "ingenic,jz4770-gpio" - - "ingenic,jz4780-gpio" - - "ingenic,x1000-gpio" - - "ingenic,x1830-gpio" - - reg: The GPIO bank number. - - interrupt-controller: Marks the device node as an interrupt controller. - - interrupts: Interrupt specifier for the controllers interrupt. - - #interrupt-cells: Should be 2. Refer to - ../interrupt-controller/interrupts.txt for more details. - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - - gpio-ranges: Range of pins managed by the GPIO controller. Refer to - ../gpio/gpio.txt for more details. - - -Example: --------- - -pinctrl: pin-controller@10010000 { - compatible = "ingenic,jz4740-pinctrl"; - reg = <0x10010000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - gpa: gpio@0 { - compatible = "ingenic,jz4740-gpio"; - reg = <0>; - - gpio-controller; - gpio-ranges = <&pinctrl 0 0 32>; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&intc>; - interrupts = <28>; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml new file mode 100644 index 000000000000..44c04d11ae4c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs pin controller devicetree bindings + +description: > + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins + may be used as GPIOs, multiplexed device functions are configured within the + GPIO port configuration registers and it is typical to refer to pins using the + naming scheme "PxN" where x is a character identifying the GPIO port with + which the pin is associated and N is an integer from 0 to 31 identifying the + pin within that GPIO port. For example PA0 is the first pin in GPIO port A, + and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830 + contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the + JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192 + pins. + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + nodename: + pattern: "^pinctrl@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-pinctrl + - ingenic,jz4725b-pinctrl + - ingenic,jz4760-pinctrl + - ingenic,jz4770-pinctrl + - ingenic,jz4780-pinctrl + - ingenic,x1000-pinctrl + - ingenic,x1500-pinctrl + - ingenic,x1830-pinctrl + - items: + - const: ingenic,jz4760b-pinctrl + - const: ingenic,jz4760-pinctrl + - items: + - const: ingenic,x1000e-pinctrl + - const: ingenic,x1000-pinctrl + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^gpio@[0-9]$": + type: object + properties: + compatible: + enum: + - ingenic,jz4740-gpio + - ingenic,jz4725b-gpio + - ingenic,jz4760-gpio + - ingenic,jz4770-gpio + - ingenic,jz4780-gpio + - ingenic,x1000-gpio + - ingenic,x1500-gpio + - ingenic,x1830-gpio + + reg: + items: + - description: The GPIO bank number + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + Refer to ../interrupt-controller/interrupts.txt for more details. + + interrupts: + maxItems: 1 + + required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + phandle: true + function: true + groups: true + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-down: true + output-low: true + output-high: true + additionalProperties: false + + - type: object + properties: + phandle: true + additionalProperties: + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + phandle: true + function: true + groups: true + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-down: true + output-low: true + output-high: true + additionalProperties: false + +examples: + - | + pin-controller@10010000 { + compatible = "ingenic,jz4770-pinctrl"; + reg = <0x10010000 0x600>; + + #address-cells = <1>; + #size-cells = <0>; + + gpio@0 { + compatible = "ingenic,jz4770-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml new file mode 100644 index 000000000000..152c151c27ad --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6779 Pin Controller Device Tree Bindings + +maintainers: + - Andy Teng <andy.teng@mediatek.com> + +description: |+ + The pin controller node should be the child of a syscon node with the + required property: + - compatible: "syscon" + +properties: + compatible: + const: mediatek,mt6779-pinctrl + + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: "gpio" + - const: "iocfg_rm" + - const: "iocfg_br" + - const: "iocfg_lm" + - const: "iocfg_lb" + - const: "iocfg_rt" + - const: "iocfg_lt" + - const: "iocfg_tl" + - const: "eint" + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: | + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: | + Specifies the summary IRQ. + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + - interrupt-controller + - interrupts + - "#interrupt-cells" + +patternProperties: + '-[0-9]*$': + type: object + patternProperties: + '-pins*$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input schmitt. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in boot/dts/<soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pinmux + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt6779-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6779-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c20000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rm", + "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", + "iocfg_lt", "iocfg_tl", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 210>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + + mmc0_pins_default: mmc0-0 { + cmd-dat-pins { + pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO172__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO169__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO177__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO170__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO173__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO171__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO174__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO167__FUNC_MSDC0_CMD>; + input-enable; + mediatek,pull-up-adv = <1>; + }; + clk-pins { + pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>; + mediatek,pull-down-adv = <2>; + }; + rst-pins { + pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>; + mediatek,pull-up-adv = <0>; + }; + }; + }; + + mmc0 { + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-names = "default"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt deleted file mode 100644 index c1b4c1819b84..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt +++ /dev/null @@ -1,116 +0,0 @@ -STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings - -ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. -Please refer to ../mfd/stmfx.txt for STMFX Core bindings. - -Required properties: -- compatible: should be "st,stmfx-0300-pinctrl". -- #gpio-cells: should be <2>, the first cell is the GPIO number and the second - cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>. -- gpio-controller: marks the device as a GPIO controller. -- #interrupt-cells: should be <2>, the first cell is the GPIO number and the - second cell is the interrupt flags in accordance with - <dt-bindings/interrupt-controller/irq.h>. -- interrupt-controller: marks the device as an interrupt controller. -- gpio-ranges: specifies the mapping between gpio controller and pin - controller pins. Check "Concerning gpio-ranges property" below. -Please refer to ../gpio/gpio.txt. - -Please refer to pinctrl-bindings.txt for pin configuration. - -Required properties for pin configuration sub-nodes: -- pins: list of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes (pinconf-generic ones): -- bias-disable: disable any bias on the pin. -- bias-pull-up: the pin will be pulled up. -- bias-pull-pin-default: use the pin-default pull state. -- bias-pull-down: the pin will be pulled down. -- drive-open-drain: the pin will be driven with open drain. -- drive-push-pull: the pin will be driven actively high and low. -- output-high: the pin will be configured as an output driving high level. -- output-low: the pin will be configured as an output driving low level. - -Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are -called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". - -Concerning gpio-ranges property: -- if all STMFX pins[24:0] are available (no other STMFX function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; -- if agpio[3:0] are not available (STMFX Touchscreen function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; -- if agpio[7:4] are not available (STMFX IDD function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; - - -Example: - - stmfx: stmfx@42 { - ... - - stmfx_pinctrl: stmfx-pin-controller { - compatible = "st,stmfx-0300-pinctrl"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; - -Example of STMFX GPIO consumers: - - joystick { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = <KEY_ENTER>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - button-1 { - label = "JoyDown"; - linux,code = <KEY_DOWN>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = <KEY_LEFT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - }; - button-3 { - label = "JoyRight"; - linux,code = <KEY_RIGHT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - button-4 { - label = "JoyUp"; - linux,code = <KEY_UP>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - }; - }; - - leds { - compatible = "gpio-leds"; - orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - - blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - } diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index 84be0f2c6f3b..0861afeccfc9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -44,7 +44,8 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, + drive-strength. Non-empty subnodes must specify the 'pins' property. Note that not all properties are valid for all pins. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index b2de3992d484..c64c93206817 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -60,8 +60,8 @@ patternProperties: oneOf: - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, - qdsd_data3 ] + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] minItems: 1 maxItems: 4 @@ -70,31 +70,31 @@ patternProperties: Specify the alternative function to be configured for the specified pins. enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, - atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, - blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, - blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, - blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, - cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, - dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, - flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, - gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, - ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, - nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, - pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, - pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, - pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, - qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, - qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 7be5de8d253f..c3d1914381ae 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -23,6 +23,8 @@ PMIC's from Qualcomm. "qcom,pmi8994-gpio" "qcom,pmi8998-gpio" "qcom,pms405-gpio" + "qcom,pm660-gpio" + "qcom,pm660l-gpio" "qcom,pm8150-gpio" "qcom,pm8150b-gpio" "qcom,pm6150-gpio" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 6dc3b52f47cd..8508c57522fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: pins. enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 1b8e8b4a6379..d75476e24514 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -21,6 +21,7 @@ Required Properties: - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller. - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller. - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller. + - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller. - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller. - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt deleted file mode 100644 index a63ccd476cda..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -Renesas RZ/A2 combined Pin and GPIO controller - -The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller. -Pin multiplexing and GPIO configuration is performed on a per-pin basis. -Each port features up to 8 pins, each of them configurable for GPIO -function (port mode) or in alternate function mode. -Up to 8 different alternate function modes exist for each single pin. - -Pin controller node -------------------- - -Required properties: - - compatible: shall be: - - "renesas,r7s9210-pinctrl": for RZ/A2M - - reg - Address base and length of the memory area where the pin controller - hardware is mapped to. - - gpio-controller - This pin controller also controls pins as GPIO - - #gpio-cells - Must be 2 - - gpio-ranges - Expresses the total number of GPIO ports/pins in this SoC - -Example: Pin controller node for RZ/A2M SoC (r7s9210) - - pinctrl: pin-controller@fcffe000 { - compatible = "renesas,r7s9210-pinctrl"; - reg = <0xfcffe000 0x1000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 0 176>; - }; - -Sub-nodes ---------- - -The child nodes of the pin controller designate pins to be used for -specific peripheral functions or as GPIO. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, pin - number and the desired function index. Use the RZA2_PINMUX macro located - in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these. - For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h - to express the desired port pin. - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Helper macros to ease assembling the pin index from its position - (port where it sits on and pin number) and alternate function identifier - are provided by the pin controller header file at: - <dt-bindings/pinctrl/r7s9210-pinctrl.h> - Integers values in "pinmux" argument list are assembled as: - ((PORT * 8 + PIN) | MUX_FUNC << 16) - - Example: Board specific pins configuration - - &pinctrl { - /* Serial Console */ - scif4_pins: serial4 { - pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ - <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ - }; - }; - - Example: Assigning a GPIO: - - leds { - status = "okay"; - compatible = "gpio-leds"; - - led0 { - /* P6_0 */ - gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml new file mode 100644 index 000000000000..b7911a994f3a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A2 combined Pin and GPIO controller + +maintainers: + - Chris Brandt <chris.brandt@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO + controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 8 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + const: "renesas,r7s9210-pinctrl" # RZ/A2M + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZA2_PIN() helper macro in r7s9210-pinctrl.h. + E.g. "RZA2_PIN(PORT6, 0)" for P6_0. + + gpio-ranges: + maxItems: 1 + +patternProperties: + "^.*$": + if: + type: object + then: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + phandle: true + + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + + /* Serial Console */ + scif4_pins: serial4 { + pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ + <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 0857cbeeb43c..72877544ca78 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -48,8 +48,8 @@ properties: st,package: description: - Indicates the SOC package used. - More details in include/dt-bindings/pinctrl/stm32-pinfunc.h + Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] |