diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
4 files changed, 103 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 000000000000..45ea565ce238 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 3 integers and represents the pin ID, the mux value + and pad setting for the pin. The first 2 integers - pin_id and mux_val - are + specified using a PIN_FUNC_ID macro, which can be found in + <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is + the pad setting value like pull-up on this pin. Please refer to the + appropriate i.MX8 Reference Manual for detailed pad CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "pin_id" indicates the pin ID + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + 111 0 0x06000020 + 112 0 0x06000020 + >; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index cbcbd31e3ce8..939cb5b6ffea 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: ------------------- diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 4d820df24b89..6f17f3991640 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -32,31 +32,37 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, spi, wdt, + # For MT7620 SoC - ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, - uartf, uartlite, wdt, wled, + ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk, + uartf, uartlite, wled, # For MT7628 and MT7688 SoCs - gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, - pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, - wdt, wled_an, wled_kn, + pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2, + wled_an, wled_kn, ] function: description: The mux function to select. enum: [ + # common + gpio, i2c, refclk, spi, + # For MT7620 SoC - ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, - pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, - rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, + rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk, wdt rst, wled, # For MT7628 and MT7688 SoCs - antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + antenna, debug, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, - refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, ] diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 425401c54269..f602a5d6e13a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -33,32 +33,29 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite, + # For RT3050, RT3052 and RT3350 SoCs - i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, - uartlite, - - # For RT5350 SoC - i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + lna, pa ] function: description: The mux function to select. enum: [ + # common + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + # For RT3050, RT3052 and RT3350 SoCs - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, - pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, - pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, - uartlite, wdg_cs1, - - # For RT5350 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, - pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + lna, pa ] required: |