diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/reset')
3 files changed, 52 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt index 1b4213eb3473..4d530d815484 100644 --- a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt @@ -1,10 +1,13 @@ Microsemi Ocelot reset controller The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the -SoC MIPS core. +SoC core. + +The reset registers are both present in the MSCC vcoreiii MIPS and +microchip Sparx5 armv8 SoC's. Required Properties: - - compatible: "mscc,ocelot-chip-reset" + - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset" Example: reset@1070008 { diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt deleted file mode 100644 index de34f27d509e..000000000000 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt +++ /dev/null @@ -1,25 +0,0 @@ -Generic reboot mode core map driver - -This driver get reboot mode arguments and call the write -interface to store the magic value in special register -or ram. Then the bootloader can read it and take different -action according to the argument stored. - -All mode properties are vendor specific, it is a indication to tell -the bootloader what to do when the system reboots, and should be named -as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value). - -For example modes common on Android platform: -- mode-normal: Normal reboot mode, system reboot with command "reboot". -- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image. -- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. -- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform, - usually used in development. - -Example: - reboot-mode { - mode-normal = <BOOT_NORMAL>; - mode-recovery = <BOOT_RECOVERY>; - mode-bootloader = <BOOT_FASTBOOT>; - mode-loader = <BOOT_BL_DOWNLOAD>; - } diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml new file mode 100644 index 000000000000..a6c91026d4cc --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic reboot mode core map + +maintainers: + - Andy Yan <andy.yan@rock-chips.com> + +description: | + This driver get reboot mode arguments and call the write + interface to store the magic value in special register + or ram. Then the bootloader can read it and take different + action according to the argument stored. + + All mode properties are vendor specific, it is a indication to tell + the bootloader what to do when the system reboots, and should be named + as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value). + + For example, modes common Android platform are: + - normal: Normal reboot mode, system reboot with command "reboot". + - recovery: Android Recovery mode, it is a mode to format the device or update a new image. + - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. + - loader: A bootloader mode, it's a mode used to download image on Rockchip platform, + usually used in development. + +properties: + mode-normal: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Default value to set on a reboot if no command was provided. + +patternProperties: + "^mode-.*$": + $ref: /schemas/types.yaml#/definitions/uint32 + +examples: + - | + reboot-mode { + mode-normal = <0>; + mode-recovery = <1>; + mode-bootloader = <2>; + mode-loader = <3>; + }; +... |