summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply/ti,bq24735.txt')
-rw-r--r--Documentation/devicetree/bindings/power/supply/ti,bq24735.txt39
1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
deleted file mode 100644
index de45e1a2a4d9..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-TI BQ24735 Charge Controller
-~~~~~~~~~~
-
-Required properties :
- - compatible : "ti,bq24735"
-
-Optional properties :
- - interrupts : Specify the interrupt to be used to trigger when the AC
- adapter is either plugged in or removed.
- - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
- status. This is a Host GPIO that is configured as an input and connected
- to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
- the GPIO must be active on AC adapter absence despite ACOK being active
- (high) on AC adapter presence.
- - ti,charge-current : Used to control and set the charging current. This value
- must be between 128mA and 8.128A with a 64mA step resolution. The POR value
- is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
- about the ChargeCurrent (0x14h) register.
- - ti,charge-voltage : Used to control and set the charging voltage. This value
- must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
- is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
- about the ChargeVoltage (0x15h) register.
- - ti,input-current : Used to control and set the charger input current. This
- value must be between 128mA and 8.064A with a 128mA step resolution. The
- POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
- more information about the InputCurrent (0x3fh) register.
- - ti,external-control : Indicates that the charger is configured externally
- and that the host should not attempt to enable/disable charging or set the
- charge voltage/current.
- - poll-interval : In case 'interrupts' is not specified, poll AC adapter
- presence with this interval (milliseconds).
-
-Example:
-
- bq24735@9 {
- compatible = "ti,bq24735";
- reg = <0x9>;
- ti,ac-detect-gpios = <&gpio 72 0x1>;
- }