diff options
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc/fsl/dma.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/powerpc/fsl/dma.txt | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt deleted file mode 100644 index c11ad5c6db21..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt +++ /dev/null @@ -1,204 +0,0 @@ -* Freescale DMA Controllers - -** Freescale Elo DMA Controller - This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx - series chips such as mpc8315, mpc8349, mpc8379 etc. - -Required properties: - -- compatible : must include "fsl,elo-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller -- cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : interrupt specifier for DMA IRQ - -- DMA channel nodes: - - compatible : must include "fsl,elo-dma-channel" - However, see note below. - - reg : DMA channel specific registers - - cell-index : DMA channel index starts at 0. - -Optional properties: - - interrupts : interrupt specifier for DMA channel IRQ - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - -Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - -** Freescale EloPlus DMA Controller - This is a 4-channel DMA controller with extended addresses and chaining, - mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as - mpc8540, mpc8641 p4080, bsc9131 etc. - -Required properties: - -- compatible : must include "fsl,eloplus-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - However, see note below. - - cell-index : DMA channel index starts at 0. - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - -** Freescale Elo3 DMA Controller - DMA controller which has same function as EloPlus except that Elo3 has 8 - channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx - series chips, such as t1040, t4240, b4860. - -Required properties: - -- compatible : must include "fsl,elo3-dma" -- reg : contains two entries for DMA General Status Registers, - i.e. DGSR0 which includes status for channel 1~4, and - DGSR1 for channel 5~8 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: -dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elo3-dma"; - reg = <0x100300 0x4>, - <0x100600 0x4>; - ranges = <0x0 0x100100 0x500>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - interrupts = <31 2 0 0>; - }; - dma-channel@300 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x300 0x80>; - interrupts = <76 2 0 0>; - }; - dma-channel@380 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x380 0x80>; - interrupts = <77 2 0 0>; - }; - dma-channel@400 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x400 0x80>; - interrupts = <78 2 0 0>; - }; - dma-channel@480 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x480 0x80>; - interrupts = <79 2 0 0>; - }; -}; - -Note on DMA channel compatible properties: The compatible property must say -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA -driver (fsldma). Any DMA channel used by fsldma cannot be used by another -DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA -channel that should be used for another driver should not use -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for -example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt -for more information. |