summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt')
-rw-r--r--Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt63
1 files changed, 0 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt b/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
deleted file mode 100644
index 5fa915a4b736..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics STM32 Remoteproc
------------------------------------
-This document defines the binding for the remoteproc component that loads and
-boots firmwares on the ST32MP family chipset.
-
-Required properties:
-- compatible: Must be "st,stm32mp1-m4"
-- reg: Address ranges of the RETRAM and MCU SRAM memories used by the
- remote processor.
-- resets: Reference to a reset controller asserting the remote processor.
-- st,syscfg-holdboot: Reference to the system configuration which holds the
- remote processor reset hold boot
- 1st cell: phandle of syscon block
- 2nd cell: register offset containing the hold boot setting
- 3rd cell: register bitmask for the hold boot field
-- st,syscfg-tz: Reference to the system configuration which holds the RCC trust
- zone mode
- 1st cell: phandle to syscon block
- 2nd cell: register offset containing the RCC trust zone mode setting
- 3rd cell: register bitmask for the RCC trust zone mode bit
-
-Optional properties:
-- interrupts: Should contain the watchdog interrupt
-- mboxes: This property is required only if the rpmsg/virtio functionality
- is used. List of phandle and mailbox channel specifiers:
- - a channel (a) used to communicate through virtqueues with the
- remote proc.
- Bi-directional channel:
- - from local to remote = send message
- - from remote to local = send message ack
- - a channel (b) working the opposite direction of channel (a)
- - a channel (c) used by the local proc to notify the remote proc
- that it is about to be shut down.
- Unidirectional channel:
- - from local to remote, where ACK from the remote means
- that it is ready for shutdown
-- mbox-names: This property is required if the mboxes property is used.
- - must be "vq0" for channel (a)
- - must be "vq1" for channel (b)
- - must be "shutdown" for channel (c)
-- memory-region: List of phandles to the reserved memory regions associated with
- the remoteproc device. This is variable and describes the
- memories shared with the remote processor (eg: remoteproc
- firmware and carveouts, rpmsg vrings, ...).
- (see ../reserved-memory/reserved-memory.txt)
-- st,syscfg-pdds: Reference to the system configuration which holds the remote
- processor deep sleep setting
- 1st cell: phandle to syscon block
- 2nd cell: register offset containing the deep sleep setting
- 3rd cell: register bitmask for the deep sleep bit
-- st,auto-boot: If defined, when remoteproc is probed, it loads the default
- firmware and starts the remote processor.
-
-Example:
- m4_rproc: m4@10000000 {
- compatible = "st,stm32mp1-m4";
- reg = <0x10000000 0x40000>,
- <0x30000000 0x40000>,
- <0x38000000 0x10000>;
- resets = <&rcc MCU_R>;
- st,syscfg-holdboot = <&rcc 0x10C 0x1>;
- st,syscfg-tz = <&rcc 0x000 0x1>;
- };