diff options
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml new file mode 100644 index 000000000000..2811334515d1 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI PRU Consumer Common Properties + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + A PRU application/consumer/user node typically uses one or more PRU device + nodes to implement a PRU application/functionality. Each application/client + node would need a reference to at least a PRU node, and optionally define + some properties needed for hardware/firmware configuration. The below + properties are a list of common properties supported by the PRU remoteproc + infrastructure. + + The application nodes shall define their own bindings like regular platform + devices, so below are in addition to each node's bindings. + +properties: + ti,prus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandles to the PRU, RTU or Tx_PRU nodes used + minItems: 1 + maxItems: 6 + items: + maxItems: 1 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 6 + description: | + firmwares for the PRU cores, the default firmware for the core from + the PRU node will be used if not provided. The firmware names should + correspond to the PRU cores listed in the 'ti,prus' property + + ti,pruss-gp-mux-sel: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + items: + enum: [0, 1, 2, 3, 4] + description: | + array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU. + This selects the internal muxing scheme for the PRU instance. Values + should correspond to the PRU cores listed in the 'ti,prus' property. The + GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0, + and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the + same slice in the associative array. If the array size is smaller than + the size of 'ti,prus' property, the default out-of-reset value (0) for the + PRU core is used. + +required: + - ti,prus + +additionalProperties: true |