diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml deleted file mode 100644 index c680e397cfd2..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml +++ /dev/null @@ -1,181 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory Child Node Common - -maintainers: - - devicetree-spec@vger.kernel.org - -description: > - Reserved memory is specified as a node under the /reserved-memory node. The - operating system shall exclude reserved memory from normal usage one can - create child nodes describing particular reserved (excluded from normal use) - memory regions. Such memory regions are usually designed for the special - usage by various device drivers. - - Each child of the reserved-memory node specifies one or more regions - of reserved memory. Each child node may either use a 'reg' property to - specify a specific range of reserved memory, or a 'size' property with - optional constraints to request a dynamically allocated block of - memory. - - Following the generic-names recommended practice, node names should - reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). - Unit address (@<address>) should be appended to the name if the node - is a static allocation. - -properties: - reg: true - - size: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's \#size-cells. Size in bytes of memory to - reserve. - - alignment: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's \#size-cells. Address boundary for - alignment of allocation. - - alloc-ranges: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: > - Address and Length pairs. Specifies regions of memory that are - acceptable to allocate from. - - iommu-addresses: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: > - A list of phandle and specifier pairs that describe static IO virtual - address space mappings and carveouts associated with a given reserved - memory region. The phandle in the first cell refers to the device for - which the mapping or carveout is to be created. - - The specifier consists of an address/size pair and denotes the IO - virtual address range of the region for the given device. The exact - format depends on the values of the "#address-cells" and "#size-cells" - properties of the device referenced via the phandle. - - When used in combination with a "reg" property, an IOVA mapping is to - be established for this memory region. One example where this can be - useful is to create an identity mapping for physical memory that the - firmware has configured some hardware to access (such as a bootsplash - framebuffer). - - If no "reg" property is specified, the "iommu-addresses" property - defines carveout regions in the IOVA space for the given device. This - can be useful if a certain memory region should not be mapped through - the IOMMU. - - no-map: - type: boolean - description: > - Indicates the operating system must not create a virtual mapping - of the region as part of its standard mapping of system memory, - nor permit speculative access to it under any circumstances other - than under the control of the device driver using the region. - - reusable: - type: boolean - description: > - The operating system can use the memory in this region with the - limitation that the device driver(s) owning the region need to be - able to reclaim it back. Typically that means that the operating - system can use that region to store volatile or cached data that - can be otherwise regenerated or migrated elsewhere. - -allOf: - - if: - required: - - no-map - - then: - not: - required: - - reusable - - - if: - required: - - reusable - - then: - not: - required: - - no-map - -oneOf: - - oneOf: - - required: - - reg - - - required: - - size - - - oneOf: - # IOMMU reservations - - required: - - iommu-addresses - - # IOMMU mappings - - required: - - reg - - iommu-addresses - -additionalProperties: true - -examples: - - | - / { - compatible = "foo"; - model = "foo"; - - #address-cells = <2>; - #size-cells = <2>; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - adsp_resv: reservation-adsp { - /* - * Restrict IOVA mappings for ADSP buffers to the 512 MiB region - * from 0x40000000 - 0x5fffffff. Anything outside is reserved by - * the ADSP for I/O memory and private memory allocations. - */ - iommu-addresses = <&adsp 0x0 0x00000000 0x00 0x40000000>, - <&adsp 0x0 0x60000000 0xff 0xa0000000>; - }; - - fb: framebuffer@90000000 { - reg = <0x0 0x90000000 0x0 0x00800000>; - iommu-addresses = <&dc0 0x0 0x90000000 0x0 0x00800000>; - }; - }; - - bus@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; - - adsp: adsp@2990000 { - reg = <0x2990000 0x2000>; - memory-region = <&adsp_resv>; - }; - - dc0: display@15200000 { - reg = <0x15200000 0x10000>; - memory-region = <&fb>; - }; - }; - }; -... |