diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reset')
7 files changed, 254 insertions, 225 deletions
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt deleted file mode 100644 index 6ed79e60248a..000000000000 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ /dev/null @@ -1,49 +0,0 @@ -Freescale i.MX System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "fsl,<chip>-src" -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain SRC interrupt and CPU WDOG interrupt, - in this order. -- #reset-cells: 1, see below - -example: - -src: src@20d8000 { - compatible = "fsl,imx6q-src"; - reg = <0x020d8000 0x4000>; - interrupts = <0 91 0x04 0 96 0x04>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -The system reset controller can be used to reset the GPU, VPU, -IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device -nodes should specify the reset line on the SRC in their resets -property, containing a phandle to the SRC device node and a -RESET_INDEX specifying which module to reset, as described in -reset.txt - -example: - - ipu1: ipu@2400000 { - resets = <&src 2>; - }; - ipu2: ipu@2800000 { - resets = <&src 4>; - }; - -The following RESET_INDEX values are valid for i.MX5: -GPU_RESET 0 -VPU_RESET 1 -IPU1_RESET 2 -OPEN_VG_RESET 3 -The following additional RESET_INDEX value is valid for i.MX6: -IPU2_RESET 4 diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml new file mode 100644 index 000000000000..27c5e34a3ac6 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX System Reset Controller + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The system reset controller can be used to reset the GPU, VPU, + IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device + nodes should specify the reset line on the SRC in their resets + property, containing a phandle to the SRC device node and a + RESET_INDEX specifying which module to reset, as described in + reset.txt + + The following RESET_INDEX values are valid for i.MX5: + GPU_RESET 0 + VPU_RESET 1 + IPU1_RESET 2 + OPEN_VG_RESET 3 + The following additional RESET_INDEX value is valid for i.MX6: + IPU2_RESET 4 + +properties: + compatible: + oneOf: + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx50-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx53-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6q-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sx-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sl-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6ul-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sll-src" + - const: "fsl,imx51-src" + + reg: + maxItems: 1 + + interrupts: + items: + - description: SRC interrupt + - description: CPU WDOG interrupts out of SRC + minItems: 1 + maxItems: 2 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset-controller@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + interrupts = <75>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt deleted file mode 100644 index e10502d9153e..000000000000 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ /dev/null @@ -1,56 +0,0 @@ -Freescale i.MX7 System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: - - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" - - For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon" - - For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon" -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain SRC interrupt -- #reset-cells: 1, see below - -example: - -src: reset-controller@30390000 { - compatible = "fsl,imx7d-src", "syscon"; - reg = <0x30390000 0x2000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; -}; - - -Specifying reset lines connected to IP modules -============================================== - -The system reset controller can be used to reset various set of -peripherals. Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -Example: - - pcie: pcie@33800000 { - - ... - - resets = <&src IMX7_RESET_PCIEPHY>, - <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; - reset-names = "pciephy", "apps"; - - ... - }; - - -For list of all valid reset indices see -<dt-bindings/reset/imx7-reset.h> for i.MX7, -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and -<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml new file mode 100644 index 000000000000..b1a71c1bb05b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7 System Reset Controller + +maintainers: + - Andrey Smirnov <andrew.smirnov@gmail.com> + +description: | + The system reset controller can be used to reset various set of + peripherals. Device nodes that need access to reset lines should + specify them as a reset phandle in their corresponding node as + specified in reset.txt. + + For list of all valid reset indices see + <dt-bindings/reset/imx7-reset.h> for i.MX7, + <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN, + <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP. + +properties: + compatible: + items: + - enum: + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reset-controller@30390000 { + compatible = "fsl,imx7d-src", "syscon"; + reg = <0x30390000 0x2000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml index 4c2b429ac702..2849ce45703c 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -31,6 +31,7 @@ properties: - renesas,r8a774a1-rst # RZ/G2M - renesas,r8a774b1-rst # RZ/G2N - renesas,r8a774c0-rst # RZ/G2E + - renesas,r8a774e1-rst # RZ/G2H - renesas,r8a7778-reset-wdt # R-Car M1A - renesas,r8a7779-reset-wdt # R-Car H1 - renesas,r8a7790-rst # R-Car H2 diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml new file mode 100644 index 000000000000..4c9b0ebf6869 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier reset controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + oneOf: + - description: System reset + enum: + - socionext,uniphier-ld4-reset + - socionext,uniphier-pro4-reset + - socionext,uniphier-sld8-reset + - socionext,uniphier-pro5-reset + - socionext,uniphier-pxs2-reset + - socionext,uniphier-ld6b-reset + - socionext,uniphier-ld11-reset + - socionext,uniphier-ld20-reset + - socionext,uniphier-pxs3-reset + - description: Media I/O (MIO) reset, SD reset + enum: + - socionext,uniphier-ld4-mio-reset + - socionext,uniphier-pro4-mio-reset + - socionext,uniphier-sld8-mio-reset + - socionext,uniphier-pro5-sd-reset + - socionext,uniphier-pxs2-sd-reset + - socionext,uniphier-ld11-mio-reset + - socionext,uniphier-ld11-sd-reset + - socionext,uniphier-ld20-sd-reset + - socionext,uniphier-pxs3-sd-reset + - description: Peripheral reset + enum: + - socionext,uniphier-ld4-peri-reset + - socionext,uniphier-pro4-peri-reset + - socionext,uniphier-sld8-peri-reset + - socionext,uniphier-pro5-peri-reset + - socionext,uniphier-pxs2-peri-reset + - socionext,uniphier-ld11-peri-reset + - socionext,uniphier-ld20-peri-reset + - socionext,uniphier-pxs3-peri-reset + - description: Analog signal amplifier reset + enum: + - socionext,uniphier-ld11-adamv-reset + - socionext,uniphier-ld20-adamv-reset + + "#reset-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - "#reset-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + reset { + compatible = "socionext,uniphier-ld11-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + reset { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + reset { + compatible = "socionext,uniphier-ld11-peri-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + adamv@57920000 { + compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + reset { + compatible = "socionext,uniphier-ld11-adamv-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index e320a8cc9e4d..88e06e5e8d23 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -1,123 +1,4 @@ -UniPhier reset controller - - -System reset ------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-reset" - for LD4 SoC - "socionext,uniphier-pro4-reset" - for Pro4 SoC - "socionext,uniphier-sld8-reset" - for sLD8 SoC - "socionext,uniphier-pro5-reset" - for Pro5 SoC - "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC - "socionext,uniphier-ld11-reset" - for LD11 SoC - "socionext,uniphier-ld20-reset" - for LD20 SoC - "socionext,uniphier-pxs3-reset" - for PXs3 SoC -- #reset-cells: should be 1. - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-ld11-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - reset { - compatible = "socionext,uniphier-ld11-reset"; - #reset-cells = <1>; - }; - - other nodes ... - }; - - -Media I/O (MIO) reset, SD reset -------------------------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-mio-reset" - for LD4 SoC - "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC - "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC - "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC - "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC - "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) - "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) - "socionext,uniphier-ld20-sd-reset" - for LD20 SoC - "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC -- #reset-cells: should be 1. - -Example: - - mioctrl@59810000 { - compatible = "socionext,uniphier-ld11-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - reset { - compatible = "socionext,uniphier-ld11-mio-reset"; - #reset-cells = <1>; - }; - - other nodes ... - }; - - -Peripheral reset ----------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-peri-reset" - for LD4 SoC - "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC - "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC - "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC - "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC - "socionext,uniphier-ld11-peri-reset" - for LD11 SoC - "socionext,uniphier-ld20-peri-reset" - for LD20 SoC - "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC -- #reset-cells: should be 1. - -Example: - - perictrl@59820000 { - compatible = "socionext,uniphier-ld11-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - reset { - compatible = "socionext,uniphier-ld11-peri-reset"; - #reset-cells = <1>; - }; - - other nodes ... - }; - - -Analog signal amplifier reset ------------------------------ - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC - "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC -- #reset-cells: should be 1. - -Example: - - adamv@57920000 { - compatible = "socionext,uniphier-ld11-adamv", - "simple-mfd", "syscon"; - reg = <0x57920000 0x1000>; - - adamv_rst: reset { - compatible = "socionext,uniphier-ld11-adamv-reset"; - #reset-cells = <1>; - }; - - other nodes ... - }; +UniPhier glue reset controller Peripheral core reset in glue layer |