diff options
Diffstat (limited to 'Documentation/devicetree/bindings/serial/mvebu-uart.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/mvebu-uart.txt | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index b7e0e32b9ac6..a062bbca532c 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -5,16 +5,19 @@ Required properties: - compatible: - "marvell,armada-3700-uart" for the standard variant of the UART (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the - FIFO, baudrate limited to 230400). + FIFO), called also UART1. - "marvell,armada-3700-uart-ext" for the extended variant of the UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit - accesses to the FIFO, baudrate unlimited by the dividers). + accesses to the FIFO), called also UART2. - reg: offset and length of the register set for the device. - clocks: UART reference clock used to derive the baudrate. If no clock is provided (possible only with the "marvell,armada-3700-uart" compatible string for backward compatibility), it will only work if the baudrate was initialized by the bootloader and no baudrate - change will then be possible. + change will then be possible. When provided it should be UART1-clk + for standard variant of UART and UART2-clk for extended variant + of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock + should not be used and are supported only for backward compatibility. - interrupts: - Must contain three elements for the standard variant of the IP (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx", @@ -33,8 +36,8 @@ Required properties: Example: uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; - clocks = <&xtalclk>; + reg = <0x12000 0x18>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -45,7 +48,7 @@ Example: uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; |