diff options
Diffstat (limited to 'Documentation/devicetree/bindings/serial/rs485.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/rs485.txt | 32 |
1 files changed, 1 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index b92592dff6dd..a7fe93efc4a5 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -1,31 +1 @@ -* RS485 serial communications - -The RTS signal is capable of automatically controlling line direction for -the built-in half-duplex mode. -The properties described hereafter shall be given to a half-duplex capable -UART node. - -Optional properties: -- rs485-rts-delay: prop-encoded-array <a b> where: - * a is the delay between rts signal and beginning of data sent in milliseconds. - it corresponds to the delay before sending data. - * b is the delay between end of data sent and rts signal in milliseconds - it corresponds to the delay after sending data and actual release of the line. - If this property is not specified, <0 0> is assumed. -- rs485-rts-active-low: drive RTS low when sending (default is high). -- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 - feature at boot time. It can be disabled later with proper ioctl. -- rs485-rx-during-tx: empty property that enables the receiving of data even - while sending data. - -RS485 example for Atmel USART: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - atmel,use-dma-rx; - atmel,use-dma-tx; - linux,rs485-enabled-at-boot-time; - rs485-rts-delay = <0 200>; // in milliseconds - }; - +See rs485.yaml |