diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/mediatek')
9 files changed, 636 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml new file mode 100644 index 000000000000..99e2caafeadf --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# # Copyright 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Device Access Permission Control driver + +description: | + MediaTek bus fabric provides TrustZone security support and data + protection to prevent slaves from being accessed by unexpected masters. + The security violation is logged and sent to the processor for further + analysis and countermeasures. + +maintainers: + - Neal Liu <neal.liu@mediatek.com> + +properties: + compatible: + enum: + - mediatek,mt6779-devapc + - mediatek,mt8186-devapc + + reg: + description: The base address of devapc register bank + maxItems: 1 + + interrupts: + description: A single interrupt specifier + maxItems: 1 + + clocks: + description: Contains module clock source and clock names + maxItems: 1 + + clock-names: + description: Names of the clocks list in clocks property + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt6779-clk.h> + + devapc: devapc@10207000 { + compatible = "mediatek,mt6779-devapc"; + reg = <0x10207000 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>; + clock-names = "devapc-infra-clock"; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml new file mode 100644 index 000000000000..4380b98b0dfe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek color correction + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek color correction with 3X3 matrix. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-ccorr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + clocks: + minItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + + mdp3_ccorr: mdp3-ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0x1401c000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>, + <CMDQ_EVENT_MDP_CCORR_EOF>; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml new file mode 100644 index 000000000000..3b212f26abc5 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The MediaTek wo-ccif provides a configuration interface for WED WO + controller used to perform offload rx packet processing (e.g. 802.11 + aggregation packet reordering or rx header translation) on MT7986 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7986-wo-ccif + - mediatek,mt7988-wo-ccif + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml new file mode 100644 index 000000000000..ba2014a8725c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mutex + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek mutex, namely MUTEX, is used to send the triggers signals called + Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display + data path or MDP data path. + In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects + the shadow register. + MUTEX device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8167-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8183-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8188-disp-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + - mediatek,mt8195-vpp-mutex + - mediatek,mt8365-disp-mutex + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: MUTEX Clock + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + then: + required: + - clocks + + +required: + - compatible + - reg + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, + <CMDQ_EVENT_MUTEX1_STREAM_EOF>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml new file mode 100644 index 000000000000..4737e5f45d54 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek PMIC Wrapper + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: + On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface + is not directly visible to the CPU, but only through the PMIC wrapper + inside the SoC. The communication between the SoC and the PMIC can + optionally be encrypted. Also a non standard Dual IO SPI mode can be + used to increase speed. + + IP Pairing + + On MT8135 the pins of some SoC internal peripherals can be on the PMIC. + The signals of these pins are routed over the SPI bus using the pwrap + bridge. In the binding description below the properties needed for bridging + are marked with "IP Pairing". These are optional on SoCs which do not support + IP Pairing + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-pwrap + - mediatek,mt6765-pwrap + - mediatek,mt6779-pwrap + - mediatek,mt6795-pwrap + - mediatek,mt6797-pwrap + - mediatek,mt6873-pwrap + - mediatek,mt7622-pwrap + - mediatek,mt8135-pwrap + - mediatek,mt8173-pwrap + - mediatek,mt8183-pwrap + - mediatek,mt8186-pwrap + - mediatek,mt8195-pwrap + - mediatek,mt8365-pwrap + - mediatek,mt8516-pwrap + - items: + - enum: + - mediatek,mt8186-pwrap + - mediatek,mt8195-pwrap + - const: syscon + - items: + - enum: + - mediatek,mt8188-pwrap + - const: mediatek,mt8195-pwrap + - const: syscon + + reg: + minItems: 1 + items: + - description: PMIC wrapper registers + - description: IP pairing registers + + reg-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: SPI bus clock + - description: Main module clock + - description: System module clock + - description: Timer module clock + + clock-names: + minItems: 2 + items: + - const: spi + - const: wrap + - const: sys + - const: tmr + + resets: + minItems: 1 + items: + - description: PMIC wrapper reset + - description: IP pairing reset + + reset-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + pmic: + type: object + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +dependentRequired: + resets: [reset-names] + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8365-pwrap + then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/mt8135-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + reg = <0 0x1000f000 0 0x1000>, + <0 0x11017000 0 0x1000>; + reg-names = "pwrap", "pwrap-bridge"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "spi", "wrap"; + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; + reset-names = "pwrap", "pwrap-bridge"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml new file mode 100644 index 000000000000..69afb329e5f4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Write Direct Memory Access + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-wdma + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + mdp3_wdma: mdp3-wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0x14006000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>, + <CMDQ_EVENT_MDP_WDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml new file mode 100644 index 000000000000..742b91d1d28e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Smart Voltage Scaling (SVS) + +maintainers: + - Roger Lu <roger.lu@mediatek.com> + - Matthias Brugger <matthias.bgg@gmail.com> + - Kevin Hilman <khilman@kernel.org> + +description: |+ + The SVS engine is a piece of hardware which has several + controllers(banks) for calculating suitable voltage to + different power domains(CPU/GPU/CCI) according to + chip process corner, temperatures and other factors. Then DVFS + driver could apply SVS bank voltage to PMIC/Buck. + +properties: + compatible: + enum: + - mediatek,mt8183-svs + - mediatek,mt8186-svs + - mediatek,mt8188-svs + - mediatek,mt8192-svs + - mediatek,mt8195-svs + + reg: + maxItems: 1 + description: Address range of the MTK SVS controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Main clock for MTK SVS controller to work. + + clock-names: + const: main + + nvmem-cells: + minItems: 1 + description: + Phandle to the calibration data provided by a nvmem device. + items: + - description: SVS efuse for SVS controller + - description: Thermal efuse for SVS controller + + nvmem-cell-names: + items: + - const: svs-calibration-data + - const: t-calibration-data + + resets: + maxItems: 1 + + reset-names: + items: + - const: svs_rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt deleted file mode 100644 index 7a32404c6114..000000000000 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ /dev/null @@ -1,67 +0,0 @@ -MediaTek PMIC Wrapper Driver - -This document describes the binding for the MediaTek PMIC wrapper. - -On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface -is not directly visible to the CPU, but only through the PMIC wrapper -inside the SoC. The communication between the SoC and the PMIC can -optionally be encrypted. Also a non standard Dual IO SPI mode can be -used to increase speed. - -IP Pairing - -on MT8135 the pins of some SoC internal peripherals can be on the PMIC. -The signals of these pins are routed over the SPI bus using the pwrap -bridge. In the binding description below the properties needed for bridging -are marked with "IP Pairing". These are optional on SoCs which do not support -IP Pairing - -Required properties in pwrap device node. -- compatible: - "mediatek,mt2701-pwrap" for MT2701/7623 SoCs - "mediatek,mt6765-pwrap" for MT6765 SoCs - "mediatek,mt6797-pwrap" for MT6797 SoCs - "mediatek,mt7622-pwrap" for MT7622 SoCs - "mediatek,mt8135-pwrap" for MT8135 SoCs - "mediatek,mt8173-pwrap" for MT8173 SoCs - "mediatek,mt8183-pwrap" for MT8183 SoCs - "mediatek,mt8516-pwrap" for MT8516 SoCs -- interrupts: IRQ for pwrap in SOC -- reg-names: Must include the following entries: - "pwrap": Main registers base - "pwrap-bridge": bridge base (IP Pairing) -- reg: Must contain an entry for each entry in reg-names. -- reset-names: Must include the following entries: - "pwrap" - "pwrap-bridge" (IP Pairing) -- resets: Must contain an entry for each entry in reset-names. -- clock-names: Must include the following entries: - "spi": SPI bus clock - "wrap": Main module clock -- clocks: Must contain an entry for each entry in clock-names. - -Optional properities: -- pmic: Using either MediaTek PMIC MFD as the child device of pwrap - See the following for child node definitions: - Documentation/devicetree/bindings/mfd/mt6397.txt - or the regulator-only device as the child device of pwrap, such as MT6380. - See the following definitions for such kinds of devices. - Documentation/devicetree/bindings/regulator/mt6380-regulator.txt - -Example: - pwrap: pwrap@1000f000 { - compatible = "mediatek,mt8135-pwrap"; - reg = <0 0x1000f000 0 0x1000>, - <0 0x11017000 0 0x1000>; - reg-names = "pwrap", "pwrap-bridge"; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; - resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, - <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; - reset-names = "pwrap", "pwrap-bridge"; - clocks = <&clk26m>, <&clk26m>; - clock-names = "spi", "wrap"; - - pmic { - compatible = "mediatek,mt6397"; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index 8f469d85833b..2bc367793aec 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -11,6 +11,7 @@ The driver implements the Generic PM domain bindings described in power/power-domain.yaml. It provides the power domains defined in - include/dt-bindings/power/mt8173-power.h - include/dt-bindings/power/mt6797-power.h +- include/dt-bindings/power/mt6765-power.h - include/dt-bindings/power/mt2701-power.h - include/dt-bindings/power/mt2712-power.h - include/dt-bindings/power/mt7622-power.h @@ -19,6 +20,7 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-scpsys" - "mediatek,mt2712-scpsys" + - "mediatek,mt6765-scpsys" - "mediatek,mt6797-scpsys" - "mediatek,mt7622-scpsys" - "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC @@ -33,6 +35,10 @@ Required properties: enabled before enabling certain power domains. Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" + Required clocks for MT6765: MUX: "mm", "mfg" + CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0", + "isp-1", "cam-0", "cam-1", "cam-2", + "cam-3","cam-4" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622 or MT7629: "hif_sel" Required clocks for MT7623A: "ethif" |