summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/adi,adau1977.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/adi,adau1977.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau1977.txt54
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
new file mode 100644
index 000000000000..e79aeef73f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
@@ -0,0 +1,54 @@
+Analog Devices ADAU1977/ADAU1978/ADAU1979
+
+Datasheets:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+ - compatible: Should contain one of the following:
+ "adi,adau1977"
+ "adi,adau1978"
+ "adi,adau1979"
+
+ - AVDD-supply: analog power supply for the device, please consult
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+ - reset-gpio: the reset pin for the chip, for more details consult
+ Documentation/devicetree/bindings/gpio/gpio.txt
+
+ - DVDD-supply: supply voltage for the digital core, please consult
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: The i2c address. Value depends on the state of ADDR0
+ and ADDR1, as wired in hardware.
+
+Examples:
+
+ adau1977_spi: adau1977@0 {
+ compatible = "adi,adau1977";
+ spi-max-frequency = <600000>;
+
+ AVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator_digital>;
+
+ reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ adau1977_i2c: adau1977@11 {
+ compatible = "adi,adau1977";
+ reg = <0x11>;
+
+ AVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator_digital>;
+
+ reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };