1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
deleted file mode 100644
index 07b68ab206fb..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Freescale i.MX audio complex with ES8328 codec
-
-Required properties:
-- compatible       : "fsl,imx-audio-es8328"
-- model            : The user-visible name of this sound complex
-- ssi-controller   : The phandle of the i.MX SSI controller
-- jack-gpio        : Optional GPIO for headphone jack
-- audio-amp-supply : Power regulator for speaker amps
-- audio-codec      : The phandle of the ES8328 audio codec
-- audio-routing    : A list of the connections between audio components.
-                     Each entry is a pair of strings, the first being the
-		     connection's sink, the second being the connection's
-		     source. Valid names could be power supplies, ES8328
-		     pins, and the jacks on the board:
-
-			Power supplies:
-			   * audio-amp
-
-			ES8328 pins:
-			   * LOUT1
-			   * LOUT2
-			   * ROUT1
-			   * ROUT2
-			   * LINPUT1
-			   * LINPUT2
-			   * RINPUT1
-			   * RINPUT2
-			   * Mic PGA
-
-			Board connectors:
-			   * Headphone
-			   * Speaker
-			   * Mic Jack
-- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
-
-Note: The AUDMUX port numbering should start at 1, which is consistent with
-hardware manual.
-
-Example:
-
-sound {
-	compatible = "fsl,imx-audio-es8328";
-	model = "imx-audio-es8328";
-	ssi-controller = <&ssi1>;
-	audio-codec = <&codec>;
-	jack-gpio = <&gpio5 15 0>;
-	audio-amp-supply = <&reg_audio_amp>;
-	audio-routing =
-		"Speaker", "LOUT2",
-		"Speaker", "ROUT2",
-		"Speaker", "audio-amp",
-		"Headphone", "ROUT1",
-		"Headphone", "LOUT1",
-		"LINPUT1", "Mic Jack",
-		"RINPUT1", "Mic Jack",
-		"Mic Jack", "Mic Bias";
-	mux-int-port = <1>;
-	mux-ext-port = <3>;
-};