1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/sound/pcm512x.txt b/Documentation/devicetree/bindings/sound/pcm512x.txt
deleted file mode 100644
index 77006a4aec4a..000000000000
--- a/Documentation/devicetree/bindings/sound/pcm512x.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-PCM512x and TAS575x audio CODECs/amplifiers
-
-These devices support both I2C and SPI (configured with pin strapping
-on the board). The TAS575x devices only support I2C.
-
-Required properties:
-
-  - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
-                 "ti,pcm5142", "ti,tas5754" or "ti,tas5756"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-  - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
-    device, as covered in bindings/regulator/regulator.txt
-
-Optional properties:
-
-  - clocks : A clock specifier for the clock connected as SCLK.  If this
-    is absent the device will be configured to clock from BCLK.  If pll-in
-    and pll-out are specified in addition to a clock, the device is
-    configured to accept clock input on a specified gpio pin.
-
-  - pll-in, pll-out : gpio pins used to connect the pll using <1>
-    through <6>.  The device will be configured for clock input on the
-    given pll-in pin and PLL output on the given pll-out pin.  An
-    external connection from the pll-out pin to the SCLK pin is assumed.
-    Caution: the TAS-desvices only support gpios 1,2 and 3
-
-Examples:
-
-	pcm5122: pcm5122@4c {
-		compatible = "ti,pcm5122";
-		reg = <0x4c>;
-
-		AVDD-supply = <&reg_3v3_analog>;
-		DVDD-supply = <&reg_1v8>;
-		CPVDD-supply = <&reg_3v3>;
-	};
-
-
-	pcm5142: pcm5142@4c {
-		compatible = "ti,pcm5142";
-		reg = <0x4c>;
-
-		AVDD-supply = <&reg_3v3_analog>;
-		DVDD-supply = <&reg_1v8>;
-		CPVDD-supply = <&reg_3v3>;
-
-		clocks = <&sck>;
-		pll-in = <3>;
-		pll-out = <6>;
-	};