summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/sgtl5000.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/sgtl5000.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/sgtl5000.txt60
1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
deleted file mode 100644
index 9d9ff5184939..000000000000
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Freescale SGTL5000 Stereo Codec
-
-Required properties:
-- compatible : "fsl,sgtl5000".
-
-- reg : the I2C address of the device
-
-- #sound-dai-cells: must be equal to 0
-
-- clocks : the clock provider of SYS_MCLK
-
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
-- micbias-resistor-k-ohms : the bias resistor to be used in kOhms
- The resistor can take values of 2k, 4k or 8k.
- If set to 0 it will be off.
- If this node is not mentioned or if the value is unknown, then
- micbias resistor is set to 4K.
-
-- micbias-voltage-m-volts : the bias voltage to be used in mVolts
- The voltage can take values from 1.25V to 3V by 250mV steps
- If this node is not mentioned or the value is unknown, then
- the value is set to 1.25V.
-
-- lrclk-strength: the LRCLK pad strength. Possible values are:
-0, 1, 2 and 3 as per the table below:
-
-VDDIO 1.8V 2.5V 3.3V
-0 = Disable
-1 = 1.66 mA 2.87 mA 4.02 mA
-2 = 3.33 mA 5.74 mA 8.03 mA
-3 = 4.99 mA 8.61 mA 12.05 mA
-
-- sclk-strength: the SCLK pad strength. Possible values are:
-0, 1, 2 and 3 as per the table below:
-
-VDDIO 1.8V 2.5V 3.3V
-0 = Disable
-1 = 1.66 mA 2.87 mA 4.02 mA
-2 = 3.33 mA 5.74 mA 8.03 mA
-3 = 4.99 mA 8.61 mA 12.05 mA
-
-Example:
-
-sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- #sound-dai-cells = <0>;
- clocks = <&clks 150>;
- micbias-resistor-k-ohms = <2>;
- micbias-voltage-m-volts = <2250>;
- VDDA-supply = <&reg_3p3v>;
- VDDIO-supply = <&reg_3p3v>;
-};