diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
17 files changed, 18 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index 9d049d4bfd58..b6cc5f6f78c2 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -29,7 +29,7 @@ The schematics explaining the gpios are as follows: IN2 +---o--+------------+--o---+ OUT2 loop2 relays -The 'loop1' gpio pin controlls two relays, which are either in loop position, +The 'loop1' gpio pin controls two relays, which are either in loop position, meaning that input and output are directly connected, or they are in mixer position, meaning that the signal is passed through the 'Sum' mixer. Similarly for 'loop2'. diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt index 7915897f8a81..e84f30c5c39b 100644 --- a/Documentation/devicetree/bindings/sound/cs35l35.txt +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -110,7 +110,7 @@ Optional Monitor Signal Format sub-node: See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet - -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formating + -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formatting on the I2S Port. Each of the 3 8 bit values in the array contain the settings for depth, location, and frame. diff --git a/Documentation/devicetree/bindings/sound/cs35l36.txt b/Documentation/devicetree/bindings/sound/cs35l36.txt index 912bd162b477..d34117b8558e 100644 --- a/Documentation/devicetree/bindings/sound/cs35l36.txt +++ b/Documentation/devicetree/bindings/sound/cs35l36.txt @@ -33,7 +33,7 @@ Optional properties: one amplifier in the system. If more than one it is best to Hi-Z the ASP port to prevent bus contention on the output signal - - cirrus,boost-ctl-select : Boost conerter control source selection. + - cirrus,boost-ctl-select : Boost converter control source selection. Selects the source of the BST_CTL target VBST voltage for the boost converter to generate. 0x00 - Control Port Value diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt index 4dbfb8274cd9..dc256adb35a2 100644 --- a/Documentation/devicetree/bindings/sound/cs53l30.txt +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -30,7 +30,7 @@ Optional properties: * frame using two different ways: * 1) Normal I2S mode on two data pins -- each SDOUT * carries 2-channel data in the same time. - * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 2) TDM mode on one single data pin -- SDOUT1 carries * 4-channel data per frame. Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 0a2480aeecf0..90112ca1ff42 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -44,7 +44,7 @@ Required properties: - fsl,esai-synchronous: This is a boolean property. If present, indicating that ESAI would work in the synchronous mode, which means all the settings for Receiving would be - duplicated from Transmition related registers. + duplicated from Transmission related registers. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index e6cb711ece77..e49da939c52f 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -135,7 +135,7 @@ patternProperties: maxItems: 16 description: This is a list of channel IDs which should be disabled. - By default, all data received from ETDM pins will be outputed to + By default, all data received from ETDM pins will be outputted to memory. etdm in supports disable_out in direct mode(w/o interconn), so user can disable the specified channels by the property. uniqueItems: true diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 560762e0a168..f548e6a58240 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -1,7 +1,7 @@ Mediatek AFE PCM controller for mt2701 Required properties: -- compatible: should be one of the followings. +- compatible: should be one of the following. - "mediatek,mt2701-audio" - "mediatek,mt7622-audio" - interrupts: should contain AFE and ASYS interrupts diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index d5adf07d46e0..5c8dba2b3a81 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -111,7 +111,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm in moudule. + which etdm clock source is required by this etdm in module. enum: - 0 # etdm1_in - 1 # etdm2_in @@ -122,7 +122,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm out moudule. + which etdm clock source is required by this etdm out module. enum: - 0 # etdm1_in - 1 # etdm2_in diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b731f16aea84..dfd768b1ad7d 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -94,7 +94,7 @@ see "Example: simple sound card for Asynchronous mode" [xx]ch [yy]ch ------> [CTU] --------> -CTU can convert [xx]ch to [yy]ch, or exchange outputed channel. +CTU can convert [xx]ch to [yy]ch, or exchange outputted channel. CTU conversion needs matrix settings. For more detail information, see below diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt index e5430d1d34e4..73577ac1b89c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -12,7 +12,7 @@ Required properties: source. For this driver the first string should always be "Analog". -Optionnal properties: +Optional properties: - rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the headphone (when the analog output is an headphone). - rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 2a55e9133408..24a6dab28f25 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -28,7 +28,7 @@ Optional properties: If the value is 0, it means the impedance sensing is not supported. - "realtek,impedance_sensing_table" The matrix rows of the impedance sensing table are consisted by impedance - minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + minimum, impedance maximum, volume, DC offset w/o and w/ mic of each L and R channel accordingly. Example is shown as following. < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml index 4afc29376efc..f6a807329a5a 100644 --- a/Documentation/devicetree/bindings/sound/serial-midi.yaml +++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml @@ -20,7 +20,7 @@ description: parent serial device. If the standard MIDI baud of 31.25 kBaud is needed (as would be the case if interfacing with arbitrary external MIDI devices), configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud - resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/sprd-pcm.txt b/Documentation/devicetree/bindings/sound/sprd-pcm.txt index 4b23e84b2e57..fbbcade2181d 100644 --- a/Documentation/devicetree/bindings/sound/sprd-pcm.txt +++ b/Documentation/devicetree/bindings/sound/sprd-pcm.txt @@ -1,4 +1,4 @@ -* Spreadtrum DMA platfrom bindings +* Spreadtrum DMA platform bindings Required properties: - compatible: Should be "sprd,pcm-platform". diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 56d206f97a96..59df8a832310 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -63,7 +63,7 @@ patternProperties: additionalProperties: false description: Two subnodes corresponding to SAI sub-block instances A et B - can be defined. Subnode can be omitted for unsused sub-block. + can be defined. Subnode can be omitted for unused sub-block. properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index 859d369c71e2..5b2874a80a4d 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -13,7 +13,7 @@ maintainers: description: | The Infotainment board plugs into the Common Processor Board, the support of the - extension board is extending the CPB audio support, decribed in: + extension board is extending the CPB audio support, described in: sound/ti,j721e-cpb-audio.txt The audio support on the Infotainment Expansion Board consists of McASP0 diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 8d60e4e236d6..a69e6c223308 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -29,7 +29,7 @@ properties: reg: description: I2C address, in multiple tas2781s case, all the i2c address - aggreate as one Audio Device to support multiple audio slots. + aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 items: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index c16e1760cf85..f3274bcc4c05 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -32,7 +32,7 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: maxItems: 1 |