diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
4 files changed, 335 insertions, 181 deletions
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index 1677448347da..bc6b5f1fe4f1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -12,190 +12,9 @@ used by all apr services. Must contain the following properties. from DSP. example "qcom,q6afe" -= AFE DAIs (Digital Audio Interface) -"dais" subnode of the AFE node. It represents afe dais, each afe dai is a -subnode of "dais" representing board specific dai setup. -"dais" node should have following properties followed by dai children. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6afe-dais" - -- #sound-dai-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -- #address-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -- #size-cells - Usage: required - Value type: <u32> - Definition: Must be 0 - -== AFE DAI is subnode of "dais" and represent a dai, it includes board specific -configuration of each dai. Must contain the following properties. - -- reg - Usage: required - Value type: <u32> - Definition: Must be dai id - -- qcom,sd-lines - Usage: required for mi2s interface - Value type: <prop-encoded-array> - Definition: Must be list of serial data lines used by this dai. - should be one or more of the 0-3 sd lines. - - - qcom,tdm-sync-mode: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Synchronization mode. - 0 - Short sync bit mode - 1 - Long sync mode - 2 - Short sync slot mode - - - qcom,tdm-sync-src: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Synchronization source. - 0 - External source - 1 - Internal source - - - qcom,tdm-data-out: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Data out signal to drive with other masters. - 0 - Disable - 1 - Enable - - - qcom,tdm-invert-sync: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Invert the sync. - 0 - Normal - 1 - Invert - - - qcom,tdm-data-delay: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Number of bit clock to delay data - with respect to sync edge. - 0 - 0 bit clock cycle - 1 - 1 bit clock cycle - 2 - 2 bit clock cycle - - - qcom,tdm-data-align: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Indicate how data is packed - within the slot. For example, 32 slot width in case of - sample bit width is 24. - 0 - MSB - 1 - LSB - -= AFE CLOCKSS -"clocks" subnode of the AFE node. It represents q6afe clocks -"clocks" node should have following properties. -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6afe-clocks" - -- #clock-cells: - Usage: required - Value type: <u32> - Definition: Must be 2. Clock Id followed by - below valid clock coupling attributes. - 1 - for no coupled clock - 2 - for dividend of the coupled clock - 3 - for divisor of the coupled clock - 4 - for inverted and no couple clock - = EXAMPLE apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; - - dais { - compatible = "qcom,q6afe-dais"; - #sound-dai-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dai@1 { - reg = <HDMI_RX>; - }; - - dai@24 { - reg = <PRIMARY_TDM_RX_0>; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay = <1>; - qcom,tdm-data-align = <0>; - - }; - - dai@25 { - reg = <PRIMARY_TDM_TX_0>; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay <1>: - qcom,tdm-data-align = <0>; - }; - - dai@16 { - reg = <PRIMARY_MI2S_RX>; - qcom,sd-lines = <0 2>; - }; - - dai@17 { - reg = <PRIMARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - - dai@18 { - reg = <SECONDARY_MI2S_RX>; - qcom,sd-lines = <0 3>; - }; - - dai@19 { - reg = <SECONDARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - - dai@20 { - reg = <TERTIARY_MI2S_RX>; - qcom,sd-lines = <1 3>; - }; - - dai@21 { - reg = <TERTIARY_MI2S_TX>; - qcom,sd-lines = <0>; - }; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0>; - }; - - dai@23 { - reg = <QUATERNARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - }; - - clocks { - compatible = "qcom,q6afe-clocks"; - #clock-cells = <2>; - }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml new file mode 100644 index 000000000000..5d972784321d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Audio Process Manager Digital Audio Interfaces binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APM DAIs in DSP + +properties: + compatible: + const: qcom,q6apm-dais + + reg: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - iommus + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + #address-cells = <1>; + #size-cells = <0>; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + service@1 { + compatible = "qcom,q6apm"; + reg = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + apm-dai@1 { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml new file mode 100644 index 000000000000..f83f00737a2f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm DSP LPASS Clock Controller binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm DSP Clock Controller + +properties: + compatible: + enum: + - qcom,q6afe-clocks + - qcom,q6prm-lpass-clocks + + reg: + maxItems: 1 + + '#clock-cells': + const: 2 + description: + Clock Id is followed by clock coupling attributes. + 1 = for no coupled clock + 2 = for dividend of the coupled clock + 3 = for divisor of the coupled clock + 4 = for inverted and no couple clock + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6afe.h> + apr { + #address-cells = <1>; + #size-cells = <0>; + apr-service@4 { + reg = <APR_SVC_AFE>; + #address-cells = <1>; + #size-cells = <0>; + clock-controller@2 { + compatible = "qcom,q6afe-clocks"; + reg = <2>; + #clock-cells = <2>; + }; + }; + }; + + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + service@2 { + reg = <GPR_PRM_MODULE_IID>; + compatible = "qcom,q6prm"; + #address-cells = <1>; + #size-cells = <0>; + clock-controller@2 { + compatible = "qcom,q6prm-lpass-clocks"; + reg = <2>; + #clock-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml new file mode 100644 index 000000000000..dc7fba7b92d5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm DSP LPASS Audio ports + +properties: + compatible: + enum: + - qcom,q6afe-dais + - qcom,q6apm-lpass-dais + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#Digital Audio Interfaces +patternProperties: + '^dai@[0-9]+$': + type: object + description: + Q6DSP Digital Audio Interfaces. + + properties: + reg: + description: + Digital Audio Interface ID + + qcom,sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + List of serial data lines used by this dai.should be one or more of the 0-3 sd lines. + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + minimum: 0 + maximum: 3 + + qcom,tdm-sync-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Synchronization mode + 0 = Short sync bit mode + 1 = Long sync mode + 2 = Short sync slot mode + + qcom,tdm-sync-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Synchronization source + 0 = External source + 1 = Internal source + + qcom,tdm-data-out: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Data out signal to drive with other masters + 0 = Disable + 1 = Enable + + qcom,tdm-invert-sync: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Invert the sync + 0 = Normal + 1 = Invert + + qcom,tdm-data-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Number of bit clock to delay data + 0 = 0 bit clock cycle + 1 = 1 bit clock cycle + 2 = 2 bit clock cycle + + qcom,tdm-data-align: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicate how data is packed within the slot. For example, 32 slot + width in case of sample bit width is 24TDM Invert the sync. + 0 = MSB + 1 = LSB + + required: + - reg + + allOf: + - if: + properties: + reg: + contains: + # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7 + items: + minimum: 24 + maximum: 103 + then: + required: + - qcom,tdm-sync-mode + - qcom,tdm-sync-src + - qcom,tdm-data-out + - qcom,tdm-invert-sync + - qcom,tdm-data-delay + - qcom,tdm-data-align + + - if: + properties: + reg: + contains: + # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and + # QUINARY_MI2S_RX - QUINARY_MI2S_TX + items: + oneOf: + - minimum: 16 + maximum: 23 + - minimum: 127 + maximum: 128 + then: + required: + - qcom,sd-lines + + additionalProperties: false + +required: + - compatible + - reg + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6afe.h> + apr { + #address-cells = <1>; + #size-cells = <0>; + apr-service@4 { + reg = <APR_SVC_AFE>; + #address-cells = <1>; + #size-cells = <0>; + q6afedai@1 { + compatible = "qcom,q6afe-dais"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + #address-cells = <1>; + #size-cells = <0>; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #address-cells = <1>; + #size-cells = <0>; + q6apmdai@1 { + compatible = "qcom,q6apm-lpass-dais"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; |