summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/spi/spi-sirf.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-sirf.txt')
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sirf.txt42
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-sirf.txt b/Documentation/devicetree/bindings/spi/spi-sirf.txt
deleted file mode 100644
index ddd78ff68fae..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sirf.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* CSR SiRFprimaII Serial Peripheral Interface
-
-Required properties:
-- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
- or "sirf,atlas7-usp"
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI interrupt
-- resets: phandle to the reset controller asserting this device in
- reset
- See ../reset/reset.txt for details.
-- dmas : Must contain an entry for each entry in clock-names.
- See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
- - rx
- - tx
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-
-- #address-cells: Number of cells required to define a chip select
- address on the SPI bus. Should be set to 1.
-- #size-cells: Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
- Units - Hz. Definition as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
-- cs-gpios: should specify GPIOs used for chipselects.
-
-Example:
-
-spi0: spi@b00d0000 {
- compatible = "sirf,prima2-spi";
- reg = <0xb00d0000 0x10000>;
- interrupts = <15>;
- dmas = <&dmac1 9>,
- <&dmac1 4>;
- dma-names = "rx", "tx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clks 19>;
- resets = <&rstc 26>;
-};