diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
6 files changed, 252 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 0e7087cc8bf9..ca155abbda7a 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -11,6 +11,14 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: xlnx,versal-ospi-1.0 + then: + required: + - power-domains properties: compatible: @@ -20,6 +28,7 @@ properties: - ti,k2g-qspi - ti,am654-ospi - intel,lgm-qspi + - xlnx,versal-ospi-1.0 - const: cdns,qspi-nor - const: cdns,qspi-nor @@ -65,6 +74,9 @@ properties: data rather than the QSPI clock. Make sure that QSPI return clock is populated on the board before using this property. + power-domains: + maxItems: 1 + resets: maxItems: 2 diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml new file mode 100644 index 000000000000..b8bb8a3dbf54 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020-21 Cadence +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence XSPI Controller + +maintainers: + - Parshuram Thombare <pthombar@cadence.com> + +description: | + The XSPI controller allows SPI protocol communication in + single, dual, quad or octal wire transmission modes for + read/write access to slaves such as SPI-NOR flash. + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: cdns,xspi-nor + + reg: + items: + - description: address and length of the controller register set + - description: address and length of the Slave DMA data port + - description: address and length of the auxiliary registers + + reg-names: + items: + - const: io + - const: sdma + - const: aux + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + xspi: spi@a0010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cdns,xspi-nor"; + reg = <0x0 0xa0010000 0x0 0x1040>, + <0x0 0xb0000000 0x0 0x1000>, + <0x0 0xa0020000 0x0 0x100>; + reg-names = "io", "sdma", "aux"; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <0>; + }; + + flash@1 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml new file mode 100644 index 000000000000..cf56cc484b19 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/ingenic,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs SPI controller devicetree bindings + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4750-spi + - ingenic,jz4780-spi + - items: + - enum: + - ingenic,jz4760-spi + - ingenic,jz4770-spi + - const: ingenic,jz4750-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 2 + minItems: 2 + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + spi@10043000 { + compatible = "ingenic,jz4770-spi", "ingenic,jz4750-spi"; + reg = <0x10043000 0x1c>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu JZ4770_CLK_SSI0>; + + dmas = <&dmac1 23 0xffffffff>, <&dmac1 22 0xffffffff>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index ef5698f426b2..055524fe8327 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -21,7 +21,11 @@ allOf: properties: compatible: items: - - const: qcom,sdm845-qspi + - enum: + - qcom,sc7180-qspi + - qcom,sc7280-qspi + - qcom,sdm845-qspi + - const: qcom,qspi-v1 reg: diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt deleted file mode 100644 index 8f34a7c7d8b8..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt +++ /dev/null @@ -1,44 +0,0 @@ -* NXP Flex Serial Peripheral Interface (FSPI) - -Required properties: - - compatible : Should be "nxp,lx2160a-fspi" - "nxp,imx8qxp-fspi" - "nxp,imx8mm-fspi" - "nxp,imx8mp-fspi" - "nxp,imx8dxl-fspi" - - - reg : First contains the register location and length, - Second contains the memory mapping address and length - - reg-names : Should contain the resource reg names: - - fspi_base: configuration register address space - - fspi_mmap: memory mapped address space - - interrupts : Should contain the interrupt for the device - -Required SPI slave node properties: - - reg : There are two buses (A and B) with two chip selects each. - This encodes to which bus and CS the flash is connected: - - <0>: Bus A, CS 0 - - <1>: Bus A, CS 1 - - <2>: Bus B, CS 0 - - <3>: Bus B, CS 1 - -Example showing the usage of two SPI NOR slave devices on bus A: - -fspi0: spi@20c0000 { - compatible = "nxp,lx2160a-fspi"; - reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; - reg-names = "fspi_base", "fspi_mmap"; - interrupts = <0 25 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "fspi_en", "fspi"; - - mt35xu512aba0: flash@0 { - reg = <0>; - .... - }; - - mt35xu512aba1: flash@1 { - reg = <1>; - .... - }; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml new file mode 100644 index 000000000000..283815d59e85 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Flex Serial Peripheral Interface (FSPI) + +maintainers: + - Kuldeep Singh <kuldeep.singh@nxp.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - nxp,imx8dxl-fspi + - nxp,imx8mm-fspi + - nxp,imx8mp-fspi + - nxp,imx8qxp-fspi + - nxp,lx2160a-fspi + + reg: + items: + - description: registers address space + - description: memory mapped address space + + reg-names: + items: + - const: fspi_base + - const: fspi_mmap + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI bus clock + - description: SPI serial clock + + clock-names: + items: + - const: fspi_en + - const: fspi + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/fsl,qoriq-clockgen.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + reg = <0x0 0x20c0000 0x0 0x100000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + clock-names = "fspi_en", "fspi"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + }; + }; |