summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/thermal/zx2967-thermal.txt')
-rw-r--r--Documentation/devicetree/bindings/thermal/zx2967-thermal.txt116
1 files changed, 116 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
new file mode 100644
index 000000000000..3dc1c6bf0478
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
@@ -0,0 +1,116 @@
+* ZTE zx2967 family Thermal
+
+Required Properties:
+- compatible: should be one of the following.
+ * zte,zx296718-thermal
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "topcrm" for the topcrm clock.
+ "apb" for the apb clock.
+- #thermal-sensor-cells: must be 0.
+
+Please note: slope coefficient defined in thermal-zones section need to be
+multiplied by 1000.
+
+Example for tempsensor:
+
+ tempsensor: tempsensor@148a000 {
+ compatible = "zte,zx296718-thermal";
+ reg = <0x0148a000 0x20>;
+ clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
+ clock-names = "topcrm", "apb";
+ #thermal-sensor-cells = <0>;
+ };
+
+Example for cooling device:
+
+ cooling_dev: cooling_dev {
+ cluster0_cooling_dev: cluster0-cooling-dev {
+ #cooling-cells = <2>;
+ cpumask = <0xf>;
+ capacitance = <1500>;
+ };
+
+ cluster1_cooling_dev: cluster1-cooling-dev {
+ #cooling-cells = <2>;
+ cpumask = <0x30>;
+ capacitance = <2000>;
+ };
+ };
+
+Example for thermal zones:
+
+ thermal-zones {
+ zx296718_thermal: zx296718_thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ sustainable-power = <6500>;
+
+ thermal-sensors = <&tempsensor 0>;
+ /*
+ * slope need to be multiplied by 1000.
+ */
+ coefficients = <1951 (-922)>;
+
+ trips {
+ trip0: switch_on_temperature {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip1: desired_temperature {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ crit: critical_temperature {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&gpu 2 5>;
+ };
+
+ map1 {
+ trip = <&trip0>;
+ cooling-device = <&cluster0_cooling_dev 1 2>;
+ };
+
+ map2 {
+ trip = <&trip1>;
+ cooling-device = <&cluster0_cooling_dev 1 2>;
+ };
+
+ map3 {
+ trip = <&crit>;
+ cooling-device = <&cluster0_cooling_dev 1 2>;
+ };
+
+ map4 {
+ trip = <&trip0>;
+ cooling-device = <&cluster1_cooling_dev 1 2>;
+ contribution = <9000>;
+ };
+
+ map5 {
+ trip = <&trip1>;
+ cooling-device = <&cluster1_cooling_dev 1 2>;
+ contribution = <4096>;
+ };
+
+ map6 {
+ trip = <&crit>;
+ cooling-device = <&cluster1_cooling_dev 1 2>;
+ contribution = <4096>;
+ };
+ };
+ };
+ };