diff options
Diffstat (limited to 'Documentation/devicetree/bindings/timer')
5 files changed, 85 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt new file mode 100644 index 000000000000..e3c28da80cb2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt @@ -0,0 +1,20 @@ +Actions Semi Owl Timer + +Required properties: +- compatible : "actions,s500-timer" for S500 + "actions,s900-timer" for S900 +- reg : Offset and length of the register set for the device. +- interrupts : Should contain the interrupts. +- interrupt-names : Valid names are: "2hz0", "2hz1", + "timer0", "timer1", "timer2", "timer3" + See ../resource-names.txt + +Example: + + timer@b0168000 { + compatible = "actions,s500-timer"; + reg = <0xb0168000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer0", "timer1"; + }; diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt index b73ca6cd07f8..195792270414 100644 --- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt @@ -7,7 +7,11 @@ Required properties: - compatible : Must be one of "faraday,fttmr010" - "cortina,gemini-timer" + "cortina,gemini-timer", "faraday,fttmr010" + "moxa,moxart-timer", "faraday,fttmr010" + "aspeed,ast2400-timer" + "aspeed,ast2500-timer" + - reg : Should contain registers location and length - interrupts : Should contain the three timer interrupts usually with flags for falling edge diff --git a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt deleted file mode 100644 index e207c11630af..000000000000 --- a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt +++ /dev/null @@ -1,19 +0,0 @@ -MOXA ART timer - -Required properties: - -- compatible : Must be one of: - - "moxa,moxart-timer" - - "aspeed,ast2400-timer" -- reg : Should contain registers location and length -- interrupts : Should contain the timer interrupt number -- clocks : Should contain phandle for the clock that drives the counter - -Example: - - timer: timer@98400000 { - compatible = "moxa,moxart-timer"; - reg = <0x98400000 0x42>; - interrupts = <19 1>; - clocks = <&coreclk>; - }; diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt new file mode 100644 index 000000000000..b4aa7ddb5b13 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt @@ -0,0 +1,28 @@ +NXP Low Power Timer/Pulse Width Modulation Module (TPM) + +The Timer/PWM Module (TPM) supports input capture, output compare, +and the generation of PWM signals to control electric motor and power +management applications. The counter, compare and capture registers +are clocked by an asynchronous clock that can remain enabled in low +power modes. TPM can support global counter bus where one TPM drives +the counter bus for the others, provided bit width is the same. + +Required properties: + +- compatible : should be "fsl,imx7ulp-tpm" +- reg : Specifies base physical address and size of the register sets + for the clock event device and clock source device. +- interrupts : Should be the clock event device interrupt. +- clocks : The clocks provided by the SoC to drive the timer, must contain + an entry for each entry in clock-names. +- clock-names : Must include the following entries: "igp" and "per". + +Example: +tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, + <&clks IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; +}; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 1a05c1b243c1..6ca6b9e582a0 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -12,46 +12,29 @@ datasheets. Required Properties: - compatible: must contain one or more of the following: - - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT - (CMT0) - - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT - (CMT0) - - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT - (CMT0) - - "renesas,cmt-32" for all 32-bit CMT without fast clock support - (CMT0 on sh7372, sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-* entries. - - - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support - (CMT[234] on sh7372, sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-fast-* entries. - - - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT - (CMT1) - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT (CMT1) - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT (CMT1) - "renesas,cmt-48" for all non-second generation 48-bit CMT - (CMT1 on sh7372, sh73a0 and r8a7740) + (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. - - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-gen2" for all second generation 48-bit CMT - (CMT[01] on r8a73a4, r8a7790 and r8a7791) - This is a fallback for the renesas,cmt-48-r8a73a4, - renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries. + - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790. + - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790. + - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791. + - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791. + - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793. + - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793. + - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794. + - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794. + + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. + - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. + These are fallbacks for r8a73a4 and all the R-Car Gen2 + entries listed above. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. @@ -59,21 +42,29 @@ Required Properties: in clock-names. - clock-names: must contain "fck" for the functional clock. - - renesas,channels-mask: bitmask of the available channels. - -Example: R8A7790 (R-Car H2) CMT0 node - - CMT0 on R8A7790 implements hardware channels 5 and 6 only and names - them channels 0 and 1 in the documentation. +Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; + }; - renesas,channels-mask = <0x60>; + cmt1: timer@e6130000 { + compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clock-names = "fck"; }; |