diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
9 files changed, 11 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index cb2bd83fa89a..50abb20fe319 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -16,7 +16,7 @@ Required properties: Example: - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ahb_gates 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 16920d78e1b8..7a33f22c815a 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -181,7 +181,7 @@ usb: usb@47400000 { "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@7402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index ad8ea56a9ed3..44e80153b148 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -18,7 +18,7 @@ Required properties: - atmel,oc-gpio: If present, specifies a gpio that needs to be activated for the overcurrent detection. -usb0: ohci@00500000 { +usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; @@ -39,7 +39,7 @@ Required properties: "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock -usb1: ehci@00800000 { +usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt index 2dc8f67eda39..24a826d5015e 100644 --- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ohci: usb@0225000 { +ohci: usb@225000 { compatible = "ti,da830-ohci"; reg = <0x225000 0x1000>; interrupts = <59>; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index a12d6012a40f..3efde12b5d68 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -30,7 +30,7 @@ Example (Sequoia 440EPx): }; Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt index 5be01c859b7a..4dc6a8ee3071 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -2,6 +2,7 @@ USB NOP PHY Required properties: - compatible: should be usb-nop-xceiv +- #phy-cells: Must be 0 Optional properties: - clocks: phandle to the PHY clock. Use as per Documentation/devicetree @@ -33,6 +34,7 @@ Example: reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; vbus-regulator = <&vbus_regulator>; + #phy-cells = <0>; }; hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index e8766b08c93b..09e70c875bc6 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index c1a0a9191d26..057dd384d473 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -26,7 +26,7 @@ Optional properties: clock frequencies table is used) Examples: - usb3503@08 { + usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; connect-gpios = <&gpx3 0 1>; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index f1e27faf528e..a85a631ec434 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -10,7 +10,7 @@ Required properties: - reg: Should contain registers location and length Examples: -usbmisc@02184800 { +usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; |