diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
18 files changed, 535 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 267fce165994..b0e5e0fe9386 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -22,10 +22,14 @@ description: | The DWC3 Glue controls the PHY routing and power, an interrupt line is connected to the Glue to serve as OTG ID change detection. + The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in + host-only mode. + properties: compatible: enum: - amlogic,meson-g12a-usb-ctrl + - amlogic,meson-a1-usb-ctrl ranges: true @@ -84,6 +88,25 @@ required: - phys - dr_mode +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: usb_ctrl + - const: usb_bus + - const: xtal_usb_ctrl + required: + - clock-names + examples: - | usb: usb@ffe09000 { diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml new file mode 100644 index 000000000000..06399ba0d9e4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Virtual Hub Controller + +maintainers: + - Benjamin Herrenschmidt <benh@kernel.crashing.org> + +description: |+ + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub + register and several sets of Device and Endpoint registers to support + the Virtual Hub's downstream USB devices. + + Supported number of devices and endpoints vary depending on hardware + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream + devices and 21 generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2400-usb-vhub + - aspeed,ast2500-usb-vhub + - aspeed,ast2600-usb-vhub + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + aspeed,vhub-downstream-ports: + description: Number of downstream ports supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 5 + minimum: 1 + maximum: 7 + + aspeed,vhub-generic-endpoints: + description: Number of generic endpoints supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 15 + minimum: 1 + maximum: 21 + +required: + - compatible + - reg + - clocks + - interrupts + - aspeed,vhub-downstream-ports + - aspeed,vhub-generic-endpoints + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 71cf7ba32237..0d6d850a7f17 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -18,46 +18,33 @@ properties: - const: rockchip,rk3066-usb - const: snps,dwc2 - items: - - const: rockchip,px30-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3036-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rv1108-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3188-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3228-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3288-usb + - enum: + - rockchip,px30-usb + - rockchip,rk3036-usb + - rockchip,rk3188-usb + - rockchip,rk3228-usb + - rockchip,rk3288-usb + - rockchip,rk3328-usb + - rockchip,rk3368-usb + - rockchip,rv1108-usb - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb - const: lantiq,xrx200-usb - items: - - const: amlogic,meson8-usb - - const: snps,dwc2 - - items: - - const: amlogic,meson8b-usb - - const: snps,dwc2 - - const: amlogic,meson-gxbb-usb - - items: - - const: amlogic,meson-g12a-usb + - enum: + - amlogic,meson8-usb + - amlogic,meson8b-usb + - amlogic,meson-gxbb-usb + - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg - const: snps,dwc2 - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg - const: st,stm32f7-hsotg + - const: st,stm32mp15-fsotg + - const: st,stm32mp15-hsotg - const: samsung,s3c6400-hsotg reg: @@ -103,6 +90,10 @@ properties: vusb_a-supply: description: phandle to voltage regulator of analog section. + vusb33d-supply: + description: reference to the VBUS and ID sensing comparators supply, in + order to perform OTG operation, used on STM32MP15 SoCs. + dr_mode: enum: [host, peripheral, otg] diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 66780a47ad85..9946ff9ba735 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,7 +7,8 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - - clock-names: should contain "ref", "bus_early", "suspend" + - clock-names: list of clock names. Ideally should be "ref", + "bus_early", "suspend" but may be less or more. - clocks: list of phandle and clock specifier pairs corresponding to entries in the clock-names property. @@ -36,7 +37,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - - resets: a single pair of phandle and reset specifier + - resets: set of phandle and reset specifier pairs - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command @@ -75,6 +76,8 @@ Optional properties: from P0 to P1/P2/P3 without delay. - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check during HS transmit. + - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in + park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 66c394f9e11f..6aae1544f240 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -78,7 +78,14 @@ Required properties: - ranges: allows valid 1:1 translation between child's address space and parent's address space - clocks: Clock IDs array as required by the controller. - - clock-names: names of clocks correseponding to IDs in the clock property + - clock-names: Names of clocks corresponding to IDs in the clock property. + Following clock names shall be provided for different + compatibles: + - samsung,exynos5250-dwusb3: "usbdrd30", + - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk", + "phyclk", + - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk" - vdd10-supply: 1.0V powr supply - vdd33-supply: 3.0V/3.3V power supply diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt index ba2e32d500c0..60e4654297af 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -9,7 +9,7 @@ Required sub-node: - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index e6790d2a4da9..ba472e7aefc9 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -34,7 +34,13 @@ Optional properties: - usb-role-switch: boolean, indicates that the device is capable of assigning the USB data role (USB host or USB device) for a given USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.txt. + see connector/usb-connector.yaml. + - role-switch-default-mode: indicating if usb-role-switch is enabled, the + device default operation mode of controller while usb + role is USB_ROLE_NONE. Valid arguments are "host" and + "peripheral". Defaults to "peripheral" if not + specified. + This is an attribute to a USB controller such as: diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt deleted file mode 100644 index 16808721f3ff..000000000000 --- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt +++ /dev/null @@ -1,32 +0,0 @@ -Ingenic JZ4740 MUSB driver - -Required properties: - -- compatible: Must be "ingenic,jz4740-musb" -- reg: Address range of the UDC register set -- interrupts: IRQ number related to the UDC hardware -- interrupt-names: must be "mc" -- clocks: phandle to the "udc" clock -- clock-names: must be "udc" -- phys: phandle to the USB PHY - -Example: - -usb_phy: usb-phy@0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; -}; - -udc: usb@13040000 { - compatible = "ingenic,jz4740-musb"; - reg = <0x13040000 0x10000>; - - interrupt-parent = <&intc>; - interrupts = <24>; - interrupt-names = "mc"; - - clocks = <&cgu JZ4740_CLK_UDC>; - clock-names = "udc"; - - phys = <&usb_phy>; -}; diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml new file mode 100644 index 000000000000..a81b0b1a2226 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ4770 USB PHY devicetree bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb-phy@.*' + + compatible: + enum: + - ingenic,jz4770-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vcc-supply: + description: VCC power supply + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - vcc-supply + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + vcc-supply = <&vcc>; + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml new file mode 100644 index 000000000000..1d6877875077 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ47xx USB IP DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb@.*' + + compatible: + oneOf: + - enum: + - ingenic,jz4770-musb + - ingenic,jz4740-musb + - items: + - const: ingenic,jz4725b-musb + - const: ingenic,jz4740-musb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: udc + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + phys: + description: PHY specifier for the USB PHY + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - phys + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + usb_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + udc: usb@13040000 { + compatible = "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <24>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4740_CLK_UDC>; + clock-names = "udc"; + + phys = <&usb_phy>; + }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml new file mode 100644 index 000000000000..4241d38d5864 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAXIM MAX3420/1 USB Peripheral Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The controller provices USB2.0 compliant FullSpeed peripheral + implementation over the SPI interface. + + Specifications about the part can be found at: + http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf + +properties: + compatible: + enum: + - maxim,max3420-udc + - maxim,max3421-udc + + reg: + maxItems: 1 + + interrupts: + items: + - description: usb irq from max3420 + - description: vbus detection irq + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: udc + - const: vbus + minItems: 1 + maxItems: 2 + + spi-max-frequency: + maximum: 26000000 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index e0ae6096f7ac..a82ca438aec1 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -34,7 +34,7 @@ Optional properties: dual-role mode. it's considered valid for compatibility reasons, not allowed for new bindings, and put into a usb-connector node. - see connector/usb-connector.txt. + see connector/usb-connector.yaml. - pinctrl-names : a pinctrl state named "default" is optional, and need be defined if auto drd switch is enabled, that means the property dr_mode is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt index 2b8a87c90d9e..5eedb0296562 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt @@ -23,7 +23,7 @@ Optional properties: MTCMOS Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.txt + usb connector node as defined in bindings/connector/usb-connector.yaml Optional properties: - id-gpios : input GPIO for USB ID pin. - vbus-gpios : input GPIO for USB VBUS pin. diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml new file mode 100644 index 000000000000..b84ed8ee8cfc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC) + +description: + The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and + USB 3.0 SuperSpeed protocols. + +maintainers: + - Nagarjuna Kristam <nkristam@nvidia.com> + - JC Kuo <jckuo@nvidia.com> + - Thierry Reding <treding@nvidia.com> + +properties: + compatible: + items: + - enum: + - nvidia,tegra210-xudc # For Tegra210 + - nvidia,tegra186-xudc # For Tegra186 + + reg: + minItems: 2 + maxItems: 3 + items: + - description: XUSB device controller registers + - description: XUSB device PCI Config registers + - description: XUSB device registers. + + reg-names: + minItems: 2 + maxItems: 3 + items: + - const: base + - const: fpci + - const: ipfs + + interrupts: + maxItems: 1 + description: Must contain the XUSB device interrupt. + + clocks: + minItems: 4 + maxItems: 5 + items: + - description: Clock to enable core XUSB dev clock. + - description: Clock to enable XUSB super speed clock. + - description: Clock to enable XUSB super speed dev clock. + - description: Clock to enable XUSB high speed dev clock. + - description: Clock to enable XUSB full speed dev clock. + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src + + power-domains: + maxItems: 2 + items: + - description: XUSBB(device) power-domain + - description: XUSBA(superspeed) power-domain + + power-domain-names: + maxItems: 2 + items: + - const: dev + - const: ss + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to the XUSB pad controller that is used to configure the USB pads + used by the XUDC controller. + + phys: + minItems: 1 + description: + Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. + + phy-names: + minItems: 1 + items: + - const: usb2-0 + - const: usb2-1 + - const: usb2-2 + - const: usb2-3 + - const: usb3-0 + - const: usb3-1 + - const: usb3-2 + - const: usb3-3 + + avddio-usb-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - power-domain-names + - nvidia,xusb-padctl + - phys + - phy-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-xudc + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + clocks: + minItems: 5 + clock-names: + minItems: 5 + required: + - avddio-usb-supply + - hvdd-usb-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-xudc + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + reg-names = "base", "fpci", "ipfs"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>; + clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src"; + + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <µ_b>; + phy-names = "usb2-0"; + + avddio-usb-supply = <&vdd_pex_1v05>; + hvdd-usb-supply = <&vdd_3v3_sys>; + }; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt index e3fc57e605ed..6f8115db2ea9 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt @@ -9,7 +9,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example : rt1711h@4e { diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt index 25780e945b15..2bd21b22ce95 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -9,7 +9,7 @@ Required sub-node: - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: hd3ss3220@47 { diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt index 0dd1469e7318..2082522b1c32 100644 --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt @@ -13,7 +13,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt index 3d05ae56cb0d..ec80641208a5 100644 --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt @@ -8,11 +8,11 @@ Required properties: - compatible : should include "gpio-usb-b-connector" and "usb-b-connector". - id-gpios, vbus-gpios : input gpios, either one of them must be present, and both can be present as well. - see connector/usb-connector.txt + see connector/usb-connector.yaml Optional properties: - vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.txt + see connector/usb-connector.yaml - Sub-nodes: - port : can be present. |