diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
14 files changed, 768 insertions, 261 deletions
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index 1dee641e3ea1..c040eef56518 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -36,6 +36,9 @@ properties: - const: bus - const: mod + iommus: + maxItems: 1 + resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt deleted file mode 100644 index 26649b4c4dd8..000000000000 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ /dev/null @@ -1,174 +0,0 @@ -Broadcom VC4 (VideoCore4) GPU - -The VC4 device present on the Raspberry Pi includes a display system -with HDMI output and the HVS (Hardware Video Scaler) for compositing -display planes. - -Required properties for VC4: -- compatible: Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4" - -Required properties for Pixel Valve: -- compatible: Should be one of "brcm,bcm2835-pixelvalve0", - "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" -- reg: Physical base address and length of the PV's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HVS: -- compatible: Should be "brcm,bcm2835-hvs" -- reg: Physical base address and length of the HVS's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HDMI -- compatible: Should be "brcm,bcm2835-hdmi" -- reg: Physical base address and length of the two register ranges - ("HDMI" and "HD", in that order) -- interrupts: The interrupt numbers - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- ddc: phandle of the I2C controller used for DDC EDID probing -- clocks: a) hdmi: The HDMI state machine clock - b) pixel: The pixel clock. - -Optional properties for HDMI: -- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear - as an interrupt/status bit in the HDMI controller - itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt -- dmas: Should contain one entry pointing to the DMA channel used to - transfer audio data -- dma-names: Should contain "audio-rx" - -Required properties for DPI: -- compatible: Should be "brcm,bcm2835-dpi" -- reg: Physical base address and length of the registers -- clocks: a) core: The core clock the unit runs on - b) pixel: The pixel clock that feeds the pixelvalve -- port: Port node with a single endpoint connecting to the panel - device, as defined in [1] - -Required properties for VEC: -- compatible: Should be "brcm,bcm2835-vec" -- reg: Physical base address and length of the registers -- clocks: The core clock the unit runs on -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for V3D: -- compatible: Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d" -- reg: Physical base address and length of the V3D's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Optional properties for V3D: -- clocks: The clock the unit runs on - -Required properties for DSI: -- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" -- reg: Physical base address and length of the DSI block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY - b) escape: The DSI ESC clock from CPRMAN - c) pixel: The DSI pixel clock from CPRMAN -- clock-output-names: - The 3 clocks output from the DSI analog PHY: dsi[01]_byte, - dsi[01]_ddr2, and dsi[01]_ddr - -Required properties for the TXP (writeback) block: -- compatible: Should be "brcm,bcm2835-txp" -- reg: Physical base address and length of the TXP block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: -pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ -}; - -hvs@7e400000 { - compatible = "brcm,bcm2835-hvs"; - reg = <0x7e400000 0x6000>; - interrupts = <2 1>; -}; - -hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; -}; - -dpi: dpi@7e208000 { - compatible = "brcm,bcm2835-dpi"; - reg = <0x7e208000 0x8c>; - clocks = <&clocks BCM2835_CLOCK_VPU>, - <&clocks BCM2835_CLOCK_DPI>; - clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; - - port { - dpi_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; -}; - -dsi1: dsi@7e700000 { - compatible = "brcm,bcm2835-dsi1"; - reg = <0x7e700000 0x8c>; - interrupts = <2 12>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - clocks = <&clocks BCM2835_PLLD_DSI1>, - <&clocks BCM2835_CLOCK_DSI1E>, - <&clocks BCM2835_CLOCK_DSI1P>; - clock-names = "phy", "escape", "pixel"; - - clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; - - pitouchscreen: panel@0 { - compatible = "raspberrypi,touchscreen"; - reg = <0>; - - <...> - }; -}; - -vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; -}; - -v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; -}; - -vc4: gpu { - compatible = "brcm,bcm2835-vc4"; -}; - -panel: panel { - compatible = "ontat,yx700wv03", "simple-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml new file mode 100644 index 000000000000..58213c564e03 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DPI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-dpi + + reg: + maxItems: 1 + + clocks: + items: + - description: The core clock the unit runs on + - description: The pixel clock that feeds the pixelvalve + + clock-names: + items: + - const: core + - const: pixel + + port: + type: object + description: > + Port node with a single endpoint connecting to the panel, as + defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +required: + - compatible + - reg + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + panel: panel { + compatible = "ontat,yx700wv03", "simple-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + + port { + dpi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml new file mode 100644 index 000000000000..3c643b227a70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DSI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - brcm,bcm2835-dsi0 + - brcm,bcm2835-dsi1 + + reg: + maxItems: 1 + + clocks: + items: + - description: The DSI PLL clock feeding the DSI analog PHY + - description: The DSI ESC clock + - description: The DSI pixel clock + + clock-names: + items: + - const: phy + - const: escape + - const: pixel + + clock-output-names: true + # FIXME: The meta-schemas don't seem to allow it for now + # items: + # - description: The DSI byte clock for the PHY + # - description: The DSI DDR2 clock + # - description: The DSI DDR clock + + interrupts: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + /* ... */ + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml new file mode 100644 index 000000000000..52b3cdac0bdf --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) HDMI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-hdmi + + reg: + items: + - description: HDMI register range + - description: HD register range + + interrupts: + minItems: 2 + + clocks: + items: + - description: The pixel clock + - description: The HDMI state machine clock + + clock-names: + items: + - const: pixel + - const: hdmi + + ddc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + +required: + - compatible + - reg + - interrupts + - clocks + - ddc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + #include <dt-bindings/gpio/gpio.h> + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml new file mode 100644 index 000000000000..02410f8d6d49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) Hardware Video Scaler + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-hvs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml new file mode 100644 index 000000000000..e60791db1fa1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) PixelValve + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-pixelvalve0 + - brcm,bcm2835-pixelvalve1 + - brcm,bcm2835-pixelvalve2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml new file mode 100644 index 000000000000..bb186197e471 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-txp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml new file mode 100644 index 000000000000..8a73780f573d --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) V3D GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-v3d + - brcm,cygnus-v3d + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml new file mode 100644 index 000000000000..0dcf0c397375 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +description: > + The VC4 device present on the Raspberry Pi includes a display system + with HDMI output and the HVS (Hardware Video Scaler) for compositing + display planes. + +properties: + compatible: + enum: + - brcm,bcm2835-vc4 + - brcm,cygnus-vc4 + +required: + - compatible + +additionalProperties: false + +examples: + - | + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml new file mode 100644 index 000000000000..d900cc57b4ec --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) VEC + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-vec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt deleted file mode 100644 index 8ec4a7f2623a..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt +++ /dev/null @@ -1,87 +0,0 @@ -SN65DSI86 DSI to eDP bridge chip --------------------------------- - -This is the binding for Texas Instruments SN65DSI86 bridge. -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf - -Required properties: -- compatible: Must be "ti,sn65dsi86" -- reg: i2c address of the chip, 0x2d as per datasheet -- enable-gpios: gpio specification for bridge_en pin (active high) - -- vccio-supply: A 1.8V supply that powers up the digital IOs. -- vpll-supply: A 1.8V supply that powers up the displayport PLL. -- vcca-supply: A 1.2V supply that powers up the analog circuits. -- vcc-supply: A 1.2V supply that powers up the digital core. - -Optional properties: -- interrupts-extended: Specifier for the SN65DSI86 interrupt line. - -- gpio-controller: Marks the device has a GPIO controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../../gpio/gpio.txt for more information. -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of - the cell formats. - -- clock-names: should be "refclk" -- clocks: Specification for input reference clock. The reference - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. - -- data-lanes: See ../../media/video-interface.txt -- lane-polarities: See ../../media/video-interface.txt - -- suspend-gpios: specification for GPIO1 pin on bridge (active low) - -Required nodes: -This device has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DSI input -- Video port 1 for eDP output - -Example -------- - -edp-bridge@2d { - compatible = "ti,sn65dsi86"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; - - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; - - vccio-supply = <&pm8916_l17>; - vcca-supply = <&pm8916_l6>; - vpll-supply = <&pm8916_l17>; - vcc-supply = <&pm8916_l6>; - - clock-names = "refclk"; - clocks = <&input_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - edp_bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - port@1 { - reg = <1>; - - edp_bridge_out: endpoint { - data-lanes = <2 1 3 0>; - lane-polarities = <0 1 0 1>; - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -} diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000000..be10e8cf31e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + const: 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + endpoint: + type: object + additionalProperties: false + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: + Video port for eDP output (panel or connector). + + properties: + reg: + const: 1 + + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + See ../../media/video-interface.txt for details. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + See ../../media/video-interface.txt for details. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + See ../../media/video-interface.txt for details. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + description: See ../../media/video-interface.txt + + dependencies: + lane-polarities: [data-lanes] + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index d6cca1479633..31e3efc73e00 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -157,6 +157,8 @@ properties: - innolux,zj070na-01p # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa + # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel + - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel |